Encapsulation of plai oil/2-hydroxypropyl-β-cyclodextrin inclusion complexes in polyvinylpyrrolidone (PVP) electrospun nanofibers for topical application.

abstract：:Objective: A polymer-based nanoparticle was constructed to target sorafenib delivery to colorectal carcinoma cells and decrease the side effects of the drug.Methods: Sorafenib-loaded nanoparticles (S-NPs) based on PEG-PLGA were prepared using a double emulsion solvent evaporation method. The properties of S-NPs were e...

journal_title：Pharmaceutical development and technology

authors： Li N,Chen Y,Sun H,Huang T,Chen T,Jiang Y,Yang Q,Yan X,Wu M

更新日期：2020-06-01 00:00:00

abstract：:In recent years, drug delivery systems such as liposomes and microparticles have been used in clinic for the treatment of different diseases and from a regulatory point of view, a parenterally applied drug and drug delivery systems must be sterile and pyrogen free. Radiation sterilization is a method recognized by pha...

journal_title：Pharmaceutical development and technology

authors： Sakar F,Özer AY,Erdogan S,Ekizoglu M,Kart D,Özalp M,Colak S,Zencir Y

更新日期：2017-09-01 00:00:00

abstract：:This article describes a method to quantitatively track the solvation of HPC in a non-aqueous solvent system during topical gel manufacture. Where visual observation and microscopy could not establish a trend, straight-forward rheological profiling demonstrated a correlation between increased solvation of hydroxypropy...

journal_title：Pharmaceutical development and technology

authors： Potuck A,Leming R,Lam S

更新日期：2019-04-01 00:00:00

abstract：:Orally dissolving tablets (ODTs) represent one of the recent advances in drug delivery. The foremost objective of this study was to optimize the utilization of lubricant sodium stearyl fumarate in the preparation of dextromethorphan hydrobromide ODTs with enhanced taste-masking properties. The simple blending of sodiu...

journal_title：Pharmaceutical development and technology

authors： Mahrous GM,Ibrahim MA,Mostafa HF,Elzayat EM

更新日期：2019-07-01 00:00:00

abstract：:In the current study, the influence of chitosan on the dissolution rate and bioavailability of acyclovir has been illustrated through the preparation of co-crystals by simple solvent change method. Chitosan was precipitated on acyclovir crystals using sodium citrate as the salting out agent. The pure drug and the prep...

journal_title：Pharmaceutical development and technology

authors： Allam AN,Naggar VF,El Gamal SS

更新日期：2013-07-01 00:00:00

abstract：:Effects of various factors, such as light intensity, polarizability of n-alcohol solvents, addition of colorants, and viscosity of solutions on the kinetics of the photoisomerization of therapeutically effective E-isomer of sorivudine to its less effective Z-isomer were studied. Solutions of known concentrations of E-...

journal_title：Pharmaceutical development and technology

authors： Desai D,Li D,Janjikhel R,Lang B,Jain N

更新日期：2001-01-01 00:00:00

abstract：:The aim of the present work was to investigate the possibility of achieving buccal delivery of a problematic drug, acyclovir, from films based on chitosan hydrochloride (HCS) and polyacrylic acid sodium salt (PAA). At first, the ionic interaction between HCS and PAA in distilled water was investigated by means of rheo...

journal_title：Pharmaceutical development and technology

authors： Rossi S,Sandri G,Ferrari F,Bonferoni MC,Caramella C

更新日期：2003-01-01 00:00:00

abstract：:Stability of captopril in a controlled release formulation has been a challenge for some time. The sustained release of captopril from floating matrices has been studied varying the antioxidant load, the sodium bicarbonate proportion and the compaction pressure. Although in many cases the effect of compaction pressure...

journal_title：Pharmaceutical development and technology

authors： Jiménez-Martínez I,Domínguez-Ramírez AM,Villafuerte-Robles L

更新日期：2009-07-22 00:00:00

abstract：CONTEXT:The recent US Food and Drug Administration (FDA) legislation has introduced the evaluation of the Design Space of critical process parameters in manufacturing processes. In freeze-drying, a "formulation" is expected to be robust when minor deviations of the product temperature do not negatively affect the final...

journal_title：Pharmaceutical development and technology

authors： Schneid SC,Stärtzel PM,Lettner P,Gieseler H

更新日期：2011-11-01 00:00:00

abstract：:The unstirred aqueous boundary layer (ABL) thickness was determined for modified Franz diffusion cells using three test compounds--parathion, 4-hexylresorcinol, and 2,4-dinitrochlorobenzene (DNCB). Steady-state fluxes through one, two, and three dialysis membranes in series were achieved in donor-saturated, infinite-d...

journal_title：Pharmaceutical development and technology

authors： Miller MA,Kasting G

更新日期：2012-11-01 00:00:00

abstract：:The purpose of this study was to develop a benchtop apparatus to simulate the scale-up of the moist-heat sterilization process of sodium carboxymethylcellulose (CMC) gel and identify critical process parameters that affect the sterilized gel viscosity. A 600-ml benchtop Parr reactor was modified and used to achieve go...

journal_title：Pharmaceutical development and technology

authors： Chu PI,Doyle D

更新日期：1999-01-01 00:00:00

abstract：:Flecainide base is pharmaceutically active substance used for production of flecainide acetate which is known in market as Tambacor, Almarytm, Apocard, Ecrinal or Flecaine. It is determined that flecainide base forms four polymorphic forms abbreviated as Ib, IIb, IIIb and IVb. Flecainide base form Ib is thermodynamica...

journal_title：Pharmaceutical development and technology

authors： Veldre K,Eglīte Z,Actiņš A,Zvirgzdiņš A,Rozenberga L,Tamanis E

更新日期：2014-02-01 00:00:00

abstract：:The fluorescence polarization technique was used to measure the microviscosity of a series of phospholipid-based emulsions. Fourteen different oil-in-water emulsions containing 20% medium chain length triglycerides, various concentrations and types of phospholipids, and 2.2% glycerin were prepared by microfluidization...

journal_title：Pharmaceutical development and technology

authors： Zhang X,Kirsch LE

更新日期：2004-01-01 00:00:00

abstract：:The effect of chemical enhancers (e.g., fatty acids, limonene, depilatory lotions) and iontophoresis was investigated on the in vitro permeability of leuprolide acetate through porcine epidermis. Franz diffusion cells and Scepter iontophoretic power source were used for the percutaneous absorption studies. Anodal iont...

journal_title：Pharmaceutical development and technology

authors： Rastogi SK,Singh J

更新日期：2004-11-01 00:00:00

abstract：:This paper explores the utility of aqueous solubility of structurally similar drugs in predicting optimum conditions for extrusion and spheronization of pellets using response surface methodology. Pharmacologically active xanthine derivatives exhibiting widely varying aqueous solubility were used to determine optimum ...

journal_title：Pharmaceutical development and technology

authors： Hileman GA,Upadrashta SM,Neau SH

更新日期：1997-02-01 00:00:00

abstract：:An osmotic-controlled pulsatile delivery technology was developed for targeted drug delivery. This novel system consists of a tablet core surrounded by an osmotic coating that has been mechanically compromised in strategic locations to facilitate reliable drug release at a given time point after administration. The ta...

journal_title：Pharmaceutical development and technology

authors： Rahemba TR,Bell S,Connolly EK,Waterman KC

更新日期：2009-01-01 00:00:00

abstract：:It is well known that carriers can affect the dissolution of poorly soluble drugs. In this study, our aim was to investigate the dissolution enhancement of carbamazepine solid dispersed or mixed at different loading ratios in crospovidone, polyvinylpyrrolidone, and sodium starch glycolate. The physical state of the dr...

journal_title：Pharmaceutical development and technology

authors： Moneghini M,Voinovich D,Perissutti B,Princivalle F

更新日期：2002-01-01 00:00:00

abstract：:This study examines the effect of the degree of methoxylation (DM) and particle size on compression properties and compactibility of pectin powders. A powder classification system based on sequential handling of compression parameters was applied. A single size fraction (90-125 μm) of pectin powders with DM values ran...

journal_title：Pharmaceutical development and technology

authors： Salbu L,Bauer-Brandl A,Alderborn G,Tho I

更新日期：2012-05-01 00:00:00

abstract：:Tablet hardness, a measure of the breaking force of a tablet, is based on numerous factors. These include the shape of the tablet and the mode of the application of force. For instance, when a pentagonal-shaped tablet was tested with a traditional hardness tester with flat platens, there was a large variation in hardn...

journal_title：Pharmaceutical development and technology

authors： Malladi J,Sidik K,Wu S,McCann R,Dougherty J,Parab P,Carragher T

更新日期：2017-03-01 00:00:00

abstract：:The purpose of this study was to improve the sensitivity and accuracy of quantitative analysis of polymorphic mixtures. Various techniques such as hand grinding and mixing (in mortar and pestle), air jet milling and ball milling for micronization of particle and mixing were used to prepare binary mixtures. Using these...

journal_title：Pharmaceutical development and technology

authors： Alam S,Patel S,Bansal AK

更新日期：2010-09-01 00:00:00

abstract：:The objective of this paper was to evaluate the mucoadhesive and sustained-release properties of the water-soluble gum obtained from Hakea gibbosa (hakea), for the formulation of buccal tablets. Flatfaced tablets containing hakea were formulated using chlorpheniramine maleate (CPM) as a model drug. Two types of tablet...

journal_title：Pharmaceutical development and technology

authors： Alur HH,Pather SI,Mitra AK,Johnston TP

更新日期：1999-08-01 00:00:00

abstract：:The objectives of this research were to evaluate the stability of lercanidipine in solution state and solid state and explore the compatibility of drug with oils, surfactants and cosurfactants as excipients. The effect of pH on the degradation in solution state was studied through pH-rate profile of lercanidipine in c...

journal_title：Pharmaceutical development and technology

authors： Parmar N,Amin S,Singla N,Kohli K

更新日期：2012-11-01 00:00:00

abstract：:The purpose of this research was to design and develop a novel controlled-release bead formulation for oral administration with buffer crystals as a carrier for loading of fenoldopam mesylate, an intravenous antihypertensive agent, which provides an in vitro release rate of 30-50 mg/hr for 6-8 hr. Buffer crystals were...

journal_title：Pharmaceutical development and technology

authors： Venkatesh GM

更新日期：1998-11-01 00:00:00

abstract：:The contact time of a vehicle on the cornea is of utmost importance for ophthalmic drug delivery. The poor bioavailability and therefore poor therapeutic response exhibited by the conventional ophthalmic solutions due to pre-corneal elimination of a drug may be overcome by the use of the in situ gel forming systems, w...

journal_title：Pharmaceutical development and technology

authors： Gupta S,Samanta MK

更新日期：2010-07-01 00:00:00

abstract：:The purpose of this work was to investigate the effect that changes in design and process variables had on the movement of particles around a fluidized bed coating apparatus. To measure the mean and variance of the particle cycle time distribution (CTD), the number of passages taken by a magnetic tracer particle throu...

journal_title：Pharmaceutical development and technology

authors： Cheng XX,Turton R

更新日期：2000-01-01 00:00:00

abstract：:Background: Lymphatic formations that effectively eradicate the virus in the lymphatic system will be therapeutically advantagous in hepatitis B virus (HBV) infection. Lipid-based formulation is often used to deliver drug via the lymphatic system. Baicalin nanoemulsion may be a promising drug delivery system for impro...

journal_title：Pharmaceutical development and technology

authors： Xu Q,Zhou A,Wu H,Bi Y

更新日期：2019-11-01 00:00:00

abstract：:Mechanically generated radicals were shown to affect short-term stability of a model pharmaceutical formulation during high-shear processing. A formulation containing an oxidatively sensitive drug, either amorphous or crystalline, and a polymeric excipient was high-shear mixed and the resulting short-term degradation ...

journal_title：Pharmaceutical development and technology

authors： Polizzi MA,Singhal D,Colvin J

更新日期：2008-01-01 00:00:00

abstract：:The aim of this work is development of a nontoxic, long-term stable solid lipid nanoparticles (SLN) formulation for the loading of Nimesulide (NiM) by a 22 factorial design. The optimized formulation was composed of 10 wt% of glyceryl behenate and 2.5 wt% of poloxamer 188. Immediately after production, Z-Ave of NiM-SL...

journal_title：Pharmaceutical development and technology

authors： Campos JR,Fernandes AR,Sousa R,Fangueiro JF,Boonme P,Garcia ML,Silva AM,Naveros BC,Souto EB

更新日期：2019-06-01 00:00:00

abstract：:This study investigates the physicochemical properties of glycyl-histidyl-lysine-copper (GHK-Cu) to support the development of a formulation for effective topical delivery. The solubility and distribution coefficients (log D) were investigated using conventional methods and GHK concentrations were quantified with a va...

journal_title：Pharmaceutical development and technology

authors： Badenhorst T,Svirskis D,Wu Z

更新日期：2016-03-01 00:00:00

abstract：:A colchicine release system utilizing biodegradable poly(phosphazenes) was investigated in vitro for intra-articular administration. Polymer degradation and drug release studies were performed on colchicine-loaded poly(phosphazenes) containing either imidazolyl (I-PPHOS) or ethyl glycinato (EG-PPHOS) side chain substi...

journal_title：Pharmaceutical development and technology

authors： Ibim SM,el-Amin SF,Goad ME,Ambrosio AM,Allcock HR,Laurencin CT

更新日期：1998-02-01 00:00:00