Effects of light intensity, n-alcohols, water-soluble colorants, and solution viscosity on photoisomerization of sorivudine.

Abstract:

:Effects of various factors, such as light intensity, polarizability of n-alcohol solvents, addition of colorants, and viscosity of solutions on the kinetics of the photoisomerization of therapeutically effective E-isomer of sorivudine to its less effective Z-isomer were studied. Solutions of known concentrations of E-isomer or Z-isomer in water or in a series of n-alcohols were directly exposed to ultraviolet (UV) A light, or visible light of 400 or 900 foot candles (fc). E-isomer solutions containing various colorants at 1% w/v, or in a series of poloxamer solutions of different viscosities, were also exposed to 400 or 900 fc light. Using the stability-indicating HPLC assay, which showed mass-balance between the starting isomer and the converting isomer, the kinetics of photoisomerization were monitored. The photoisomerization reaction, which takes place on the vinyl side chain, was found to be a first-order reversible reaction. In water, the rate of conversion of E-isomer to Z-isomer was faster than that of Z-isomer to E-isomer, since, E-isomer with higher extinction coefficient absorbed substantially more light than Z-isomer. The rate of photoisomerization increased with the intensity of the visible light and was very rapid in the presence of UV A light (300 to 400 nm), which is to be expected based on the 239 nm and 283 nm absorption maxima of sorivudine. Addition of water-soluble colorants retarded the photoisomerization process significantly, especially as the maximum absorption wavelengths (lambda max) of the colorants approached the UV region. The rate of photoisomerization increased with increasing polarizability (alpha s) of the n-alcohol solvents. Polarizable solvents such as alcohols could compensate for the electron density built up in the excited state, and thus facilitated the photoisomerization process. The rate of photoisomerization decreased as the viscosity of solution increased. This may be attributed to the fact that the twisting of the C=C bond in the excited state can be inhibited by the friction imposed by the viscous medium.

journal_name

Pharm Dev Technol

authors

Desai D,Li D,Janjikhel R,Lang B,Jain N

doi

10.1081/pdt-100000047

subject

Has Abstract

pub_date

2001-01-01 00:00:00

pages

99-106

issue

1

eissn

1083-7450

issn

1097-9867

journal_volume

6

pub_type

杂志文章
  • Polyacrylic acid polymers hydrogels intended to topical drug delivery: preparation and characterization.

    abstract:CONTEXT:Bioadhesiviness of polyacrylic acid polymers make them promising hydrogels to design topical drug delivery systems, allowing a close contact with biological substrate as well as an enhanced local concentration gradient, both factors that may improve the biological performance of the drugs. AIM:Texture and bioa...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2014.882941

    authors: Calixto G,Yoshii AC,Rocha e Silva H,Stringhetti Ferreira Cury B,Chorilli M

    更新日期:2015-06-01 00:00:00

  • Purification of pharmaceutical excipients with supercritical fluid extraction.

    abstract::Supercritical fluid extraction (SFE), with carbon dioxide as the solvent, was tested for its ability to remove common reactive impurities from several pharmaceutical excipient powders including starch, microcrystalline cellulose (MCC), hydroxypropylcellulose (HPC), polyethylene oxide (PEO), and polyvinylpyrrolidone (P...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450500299958

    authors: Ashraf-Khorassani M,Taylor LT,Waterman KC,Narayan P,Brannegan DR,Reid GL

    更新日期:2005-01-01 00:00:00

  • Novel potential drug against T. cruzi and its interaction with surfactant micelles.

    abstract::The interaction of 5-nitro-2-furfurilylidene benzhydrazide (5NFB), potential anti-trypanosomal compound, with micellar solutions was studied. The results indicated that 50 mug of 5NFB completely kills 20 million T. cruzi epimastigote cells within 3 days, whereas the same amount of benznidazole kills 30% of the cells a...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450701212727

    authors: Rangel-Yagui CO,Hsu HW,Barbosa LR,Caetano W,Pessoa A Jr,Tavares LC,Itri R

    更新日期:2007-01-01 00:00:00

  • Mucoadhesive formulations: innovations, merits, drawbacks, and future outlook.

    abstract::Mucosa has now been recognized as a potential site for both local and systemic delivery of therapeutics. Mucoadhesive drug delivery systems with customizable release profiles have recently gained considerable interest among formulation scientists to improve clinical outcomes of drugs. This review summarizes the curren...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2020.1753771

    authors: Kumar A,Naik PK,Pradhan D,Ghosh G,Rath G

    更新日期:2020-09-01 00:00:00

  • Physicochemical characterization of native glycyl-l-histidyl-l-lysine tripeptide for wound healing and anti-aging: a preformulation study for dermal delivery.

    abstract::This study investigates the physicochemical properties of glycyl-histidyl-lysine-copper (GHK-Cu) to support the development of a formulation for effective topical delivery. The solubility and distribution coefficients (log D) were investigated using conventional methods and GHK concentrations were quantified with a va...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2014.979944

    authors: Badenhorst T,Svirskis D,Wu Z

    更新日期:2016-03-01 00:00:00

  • Developing an injectable formula containing an oxygen-sensitive drug: a case study of danofloxacin injectable.

    abstract::The purpose of this study was to assess the impact of impurities in formulation components, antioxidants, formulation pH, and processing/packaging on the extent of color change associated with oxidation of danofloxacin injectable. The methods used in this study include reversed-phase HPLC, UV-VIS spectrophotometry, at...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-100101384

    authors: Kasraian K,Kuzniar AA,Wilson GG,Wood JA

    更新日期:1999-01-01 00:00:00

  • Evaluation of disintegrating time of rapidly disintegrating tablets by a paddle method.

    abstract::A paddle method for measurement of the disintegrating time of orally disintegrating tablets with rizatriptan benzoate as a model drug was evaluated. The paddle method employed a dissolution test assembly with tablets immersed in disintegrating medium through a fastened sinker. Paddle stirring rate, opening of the sink...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450600767649

    authors: Que L,Wu W,Cheng X,Hu T

    更新日期:2006-01-01 00:00:00

  • Relating formulation variables to in vitro dissolution using an artificial neural network.

    abstract::The purpose of this paper was to investigate the effect of several experimental variables on the ability of a neural network to predict in vitro dissolution rate as a function of product formulation changes. Neural network software was trained with sets of hypothetical and experimental data consisting of 4-15 formulat...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837459709031442

    authors: Ebube NK,McCall T,Chen Y,Meyer MC

    更新日期:1997-08-01 00:00:00

  • Improvement of solubility and oral bioavailability of rutin by complexation with 2-hydroxypropyl-beta-cyclodextrin.

    abstract::The object of this study was to enhance the solubility, dissolution rate, and oral bioavailability of rutin by complexation with 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CyD). The interaction of rutin with cyclodextrins (CyDs) was evaluated by the solubility, and ultraviolet (UV) and circular dichroism (CD) spectrop...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-100100556

    authors: Miyake K,Arima H,Hirayama F,Yamamoto M,Horikawa T,Sumiyoshi H,Noda S,Uekama K

    更新日期:2000-01-01 00:00:00

  • Novel platens to measure the hardness of a pentagonal shaped tablet.

    abstract::Tablet hardness, a measure of the breaking force of a tablet, is based on numerous factors. These include the shape of the tablet and the mode of the application of force. For instance, when a pentagonal-shaped tablet was tested with a traditional hardness tester with flat platens, there was a large variation in hardn...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2016.1219370

    authors: Malladi J,Sidik K,Wu S,McCann R,Dougherty J,Parab P,Carragher T

    更新日期:2017-03-01 00:00:00

  • Pharmacokinetics of 16-dehydropregnenolone hydroxypropyl-β-cyclodextrin inclusion complex following peroral administration.

    abstract::16-Dehydropregnenolone (16-DHP) is an active compound with an unsatisfied in vivo behavior and poor water-solubility, which limits its clinical application. To improve its in vivo behavior and water-solubility, a Hydroxypropyl-beta-Cyclodextrin (HP-β-CD) inclusion complex of 16-DHP was prepared in this paper. Pharmaco...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2016.1193192

    authors: Sun Y,Jia L,Zhou H,Mao M,Wang X,Wei L,Sun L

    更新日期:2017-03-01 00:00:00

  • Effect of sample preparation method on quantification of polymorphs using PXRD.

    abstract::The purpose of this study was to improve the sensitivity and accuracy of quantitative analysis of polymorphic mixtures. Various techniques such as hand grinding and mixing (in mortar and pestle), air jet milling and ball milling for micronization of particle and mixing were used to prepare binary mixtures. Using these...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450903286511

    authors: Alam S,Patel S,Bansal AK

    更新日期:2010-09-01 00:00:00

  • A method for the preparation of sustained release-coated Metoprolol Succinate pellet-containing tablets.

    abstract::The purpose of this study was to develop a method to prepare Metoprolol Succinate (MS) sustained release pellets and compress them into pellet-containing tablets without losing sustained release property. The drug layered pellets were coated with Eudragit NE 30D to obtain a sustained release (SR) property. The mechani...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2015.1081612

    authors: Yang Z,Yu J,Yang T,Xing H,Zhang J,Xian L,Ding P,Wang D

    更新日期:2016-12-01 00:00:00

  • Comparison of various injectable protein-loaded biodegradable poly(lactide-co-glycolide) (PLGA) devices: in-situ-formed implant versus in-situ-formed microspheres versus isolated microspheres.

    abstract::The purpose of this research was to prepare various injectable, protein (cytochrome c)-loaded biodegradable poly(lactide-co-glycolide) (PLGA) devices by a novel microencapsulation method and to compare their characteristics. Syringeable mixtures of polymer and protein solidified upon injection when coming in contact w...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-100100535

    authors: Jain RA,Rhodes CT,Railkar AM,Malick AW,Shah NH

    更新日期:2000-01-01 00:00:00

  • Formulation and evaluation of meloxicam niosomes as vesicular carriers for enhanced skin delivery.

    abstract:CONTEXT:Skin delivery of Meloxicam (MX) offers several advantages over the oral route which is associated with potential side effects. OBJECTIVES:The aim of this study was to develop transdermal MX in niosomes. MATERIALS AND METHODS:Vesicles prepared by thin film hydration method were characterized and the acute anti...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2011.598166

    authors: El-Menshawe SF,Hussein AK

    更新日期:2013-07-01 00:00:00

  • Preparation and characterization of a powder containing an oily liquid drug with Eudragit EPO or L100 copolymer.

    abstract::Oily liquid drugs are not convenient for oral administration. We developed a powder containing clofibrate (CF), a model of an oily drug, using aminoalkyl methacrylate copolymer (EPO) or methacrylic acid copolymer (L100). CF or a mixture of CF and soybean oil was emulsified with EPO or L100 aqueous solution. Using a hi...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2015.1086370

    authors: Fujii M,Kawakami A,Saito A,Tuchiya H,Koizumi N,Watanabe Y

    更新日期:2016-12-01 00:00:00

  • Interaction of [D-Trp6, Des-Gly10] LHRH ethylamide and hydroxy propyl beta-cyclodextrin (HPbetaCD): thermodynamics of interaction and protection from degradation by alpha-chymotrypsin.

    abstract:PURPOSE:The purpose of this study is to investigate the mechanisms and thermodynamics of the interaction between hydroxypropyl beta-cyclodextrin (HPdetaCD) and [D-Trp6, des-Gly10] LHRH ethylamide (deslorelin), a peptide drug. METHODS:We used UV and fluorescence spectroscopy to study the interaction of HPbetaCD and des...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-120000297

    authors: Koushik KN,Bandi N,Kompella UB

    更新日期:2001-11-01 00:00:00

  • Drug-polymer mixed coating: a new approach for controlling drug release rates in pellets.

    abstract::A new approach to developing a drug-polymer mixed coat for highly water-soluble diltiazem pellets was investigated at different coating levels. Drug layering and the coating procedures were performed using a bottom spray fluidized bed coater. Drug pellets were coated with Eudragit NE40 (NE40) alone and in combination ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450500464008

    authors: Nisar ur Rahman,Yuen KH,Khan NA,Wong JW

    更新日期:2006-02-01 00:00:00

  • Mechanoradical-induced degradation in a pharmaceutical blend during high-shear processing.

    abstract::Mechanically generated radicals were shown to affect short-term stability of a model pharmaceutical formulation during high-shear processing. A formulation containing an oxidatively sensitive drug, either amorphous or crystalline, and a polymeric excipient was high-shear mixed and the resulting short-term degradation ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450802328869

    authors: Polizzi MA,Singhal D,Colvin J

    更新日期:2008-01-01 00:00:00

  • Studies on preparation of carbamazepine (CBZ) supersaturatable self-microemulsifying (S-SMEDDS) formulation and relative bioavailability in beagle dogs.

    abstract::The main purpose of this work was to develop a supersaturatable self-microemulsifying drug delivery system (S-SMEDDS) of carbamazepine (CBZ). S-SMEDDS of CBZ was prepared and drug precipitation behavior, dissolution rate in vitro and particle size distribution were evaluated. The relative bioavailability of S-SMEDDS f...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837451003774419

    authors: Zhang N,Zhang W,Jin Y,Quan DQ

    更新日期:2011-08-01 00:00:00

  • The absorption of (99m)Tc-alendronate given by rectal route in rabbits.

    abstract::Alendronate sodium (ALD) is a bisphosphonate medication used in the treatment and prevention of osteoporosis. Absorption of ALD as oral formulation is very poor (0.5%-1%). Its bioavailability can decrease with food effect. It has some gastrointestinal adverse effects such as gastritis, gastric ulcer, and esophagitis. ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450801949509

    authors: Asikoğlu M,Ozguney I,Ozcan I,Orumlu O,Guneri T,Koseoğlu K,Ozkilic H

    更新日期:2008-01-01 00:00:00

  • Physiological parameters of the gastrointestinal fluid impact the dissolution behavior of the BCS class IIa drug valsartan.

    abstract::The objective of this study was to investigate the effect of the physiological parameters (pH, buffer capacity, and ionic strength) of the gastrointestinal (GI) fluid on the dissolution behavior of the class II weakly acidic (BCS class IIa) drug valsartan. A series of in vitro dissolution studies was carried out on Di...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2018.1536996

    authors: Hamed R

    更新日期:2018-12-01 00:00:00

  • Production of microparticles by high-pressure homogenization.

    abstract::A high-pressure homogenization method for the production of aqueous suspensions of poly(D,L-lactide) and poly(D,L-lactide-co-glycolide) was investigated. Depending on the production conditions it was possible to produce micro--as well as nanoparticulate systems without the use of organic solvents. The influence of dif...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837459809009857

    authors: Calvör A,Müller BW

    更新日期:1998-08-01 00:00:00

  • The nonsteady state modeling of freeze drying: in-process product temperature and moisture content mapping and pharmaceutical product quality applications.

    abstract:INTRODUCTION:Theoretical models of the freeze-drying process are potentially useful to guide the design of a freeze-drying process as well as to obtain information not readily accessible by direct experimentation, such as moisture distribution and glass transition temperature, Tg, within a vial during processing. Previ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-35869

    authors: Pikal MJ,Cardon S,Bhugra C,Jameel F,Rambhatla S,Mascarenhas WJ,Akay HU

    更新日期:2005-01-01 00:00:00

  • Rapid formulation screening with a Multipart Microscale Fluid bed Powder processor.

    abstract::The aim of this study was to investigate early formulation screening in small scale with a miniaturized fluid bed device. Altogether eight different batches were granulated in a Multipart Microscale Fluid bed Powder processor (MMFP) with constant process conditions using electrostatic atomization. Atomization voltage ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837451003739271

    authors: Kivikero N,Murtomaa M,Antikainen O,Hatara J,Juppo AM,Sandler N

    更新日期:2011-08-01 00:00:00

  • Nano drug delivery systems and gamma radiation sterilization.

    abstract::In recent years, drug delivery systems such as liposomes and microparticles have been used in clinic for the treatment of different diseases and from a regulatory point of view, a parenterally applied drug and drug delivery systems must be sterile and pyrogen free. Radiation sterilization is a method recognized by pha...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2016.1163393

    authors: Sakar F,Özer AY,Erdogan S,Ekizoglu M,Kart D,Özalp M,Colak S,Zencir Y

    更新日期:2017-09-01 00:00:00

  • Simultaneous determination of levodopa and carbidopa in levodopa-carbidopa tablets by ATR-FTIR spectrometry.

    abstract::A novel analytical procedure has been developed for quantitative determination of levodopa and carbidopa in aqueous binary solutions acidified by HCl and without any other sample pretreatment. The method is based partially on least squares treatment of data obtained by attenuated total reflectance Fourier transform in...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450701481249

    authors: Khanmohammadi M,Mobedi E,Garmarudi AB,Mobedi H,Kargosha K

    更新日期:2007-01-01 00:00:00

  • Physicochemical stability of bioadhesive thermoresponsive platforms for methylene blue and hypericin delivery in photodynamic therapy.

    abstract::Hypericin (Hyp), a natural hydrophobic and photoactive pigment, and methylene blue (MB), a hydrophilic cationic dye, are utilized as photosensitizer (PS) for photodynamic therapy of cancer. Bioadhesive and thermoresponsive polymeric systems can improve the drug availability by increasing the contact time between the s...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2019.1711394

    authors: Borghi-Pangoni FB,Junqueira MV,Bruschi ML

    更新日期:2020-04-01 00:00:00

  • Design and evaluation of ocular drug delivery system for controlled delivery of gatifloxacin sesquehydrate: In vitro and in vivo evaluation.

    abstract::The objective of this investigation was to formulate ocular inserts of gatifloxacin sesquehydrate to achieve controlled drug release. Drug reservoir was prepared using hydrophilic polymers, namely polyvinyl alcohol and polyvinyl pyrrolidone. The rate controlling membrane was prepared using hydrophobic ethyl cellulose ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2010.502178

    authors: Patel UL,Chotai NP,Nagda CD

    更新日期:2012-01-01 00:00:00

  • Waxy corn starch: a potent cofiller in pellets produced by extrusion-spheronization.

    abstract::The purpose of this study was to assess the usefulness of waxy corn (maize) starch as a cofiller and diluent in pellets produced by aqueous extrusion-spheronization. Waxy corn starch was combined with microcrystalline cellulose (MCC) in the range of 20-50% of the entire composition. Pellets containing ordinary corn st...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-100100521

    authors: Junnila R,Palviainen P,Heinämäki J,Myllärinen P,Forssell P,Yliruusi J

    更新日期:2000-01-01 00:00:00