Abstract:
:A paddle method for measurement of the disintegrating time of orally disintegrating tablets with rizatriptan benzoate as a model drug was evaluated. The paddle method employed a dissolution test assembly with tablets immersed in disintegrating medium through a fastened sinker. Paddle stirring rate, opening of the sinker sieve, and tablet crushing strength influenced disintegrating time greatly. A logarithmic relationship was observed between disintegrating time and paddle revolution speed, while disintegrating time values and tablet crushing strength were fitted to a linear equation. The paddle method values with limited deviation were in good correlation with in vivo results. The paddle method was employed to optimize the disintegrating time of rizatriptan benzoate orally disintegrating tablets using a factorial design. The best-fit quadratic equation with a regression coefficient of 0.996 was highly predictive, which was indicative that the paddle method was precise and applicable in formulation optimization.
journal_name
Pharm Dev Technoljournal_title
Pharmaceutical development and technologyauthors
Que L,Wu W,Cheng X,Hu Tdoi
10.1080/10837450600767649subject
Has Abstractpub_date
2006-01-01 00:00:00pages
295-301issue
3eissn
1083-7450issn
1097-9867pii
WV82W168L3L8R727journal_volume
11pub_type
杂志文章abstract::The objective of the present investigation was to enhance skin permeation of diclofenac using water-in-oil microemulsion and to elucidate its skin permeation mechanism. The w/o microemulsion formulations were selected based on constructed pseudoternary phase diagrams depending on water solubilization capacity and ther...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450.2013.788658
更新日期:2014-05-01 00:00:00
abstract::A colchicine release system utilizing biodegradable poly(phosphazenes) was investigated in vitro for intra-articular administration. Polymer degradation and drug release studies were performed on colchicine-loaded poly(phosphazenes) containing either imidazolyl (I-PPHOS) or ethyl glycinato (EG-PPHOS) side chain substi...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837459809028479
更新日期:1998-02-01 00:00:00
abstract::The main purpose of this work was to develop a supersaturatable self-microemulsifying drug delivery system (S-SMEDDS) of carbamazepine (CBZ). S-SMEDDS of CBZ was prepared and drug precipitation behavior, dissolution rate in vitro and particle size distribution were evaluated. The relative bioavailability of S-SMEDDS f...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837451003774419
更新日期:2011-08-01 00:00:00
abstract::The objective of the study was to mask the unpleasant taste of captopril (CPT). Taste masking was achieved by complexation of CPT with a basic ion exchange resin, Dowex® 66, using the batch method. Dowex® 66 was used for the adsorption of CPT, and physical and chemical parameters of the CPT resinates complex were eval...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2019.1687520
更新日期:2020-03-01 00:00:00
abstract::In this study, we developed a one-step method to prepare ibuprofen fast- and sustained-release complex preparation. It was based on a double jets electrospinning process. Ibuprofen, a poorly water-soluble drug, was electrospun into fibers with polyvinyl pyrrolidone and hydroxypropyl methyl cellulose by two jets, respe...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2020.1728773
更新日期:2020-07-01 00:00:00
abstract::The compendial method of evaluation of orodispersible tablets (ODT) is the same disintegration test as for conventional tablets. Since it does not reflect the disintegration process in the oral cavity, alternative methods are proposed that are more related to in vivo conditions, e.g. modified dissolution paddle appara...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450.2012.710238
更新日期:2013-03-01 00:00:00
abstract::The effect of six factors: spray gun, formulation, inlet temperature, atomizing air pressure, fan air pressure, and gun-bed distance, on the final adhesion of the film coat to the tablet core were assessed. The method used was based on an experimental design, Resolution IV, that allowed the main effects to be free fro...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1081/pdt-49692
更新日期:2005-01-01 00:00:00
abstract::Aqueous concentrated plain mixtures of dextran and concanavalin A (con A) were examined for their rheological response to glucose for comparison with previously studied partially photopolymerized acrylic derivatives. Non-destructive oscillatory tests were undertaken within the linear viscoelastic range to examine the ...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450903002181
更新日期:2010-01-01 00:00:00
abstract::The objective of this study was to compare the dissolution behavior of tablets prepared from solid dispersions with and without drug-carrier interactions. Diazepam and nifedipine were used as model drugs. Two types of carriers were used; polyvinylpyrrolidone (PVP K12, K30 and K60) and saccharides (inulin 1.8 kDa, 4 kD...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450903286529
更新日期:2010-09-01 00:00:00
abstract::The present study was aimed to develop a matrix-type transdermal formulation of pentazocine using mixed polymeric grades of Eudragit RL/RS. The possible interaction between drug and polymer used were characterized by FTIR, DSC and X-RD. X-RD study indicates a change of state of drug from crystalline to amorphous in th...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450903188501
更新日期:2010-06-01 00:00:00
abstract::Colorectal cancer (CRC) is the third most common cause of cancer-related death in both men and women. Often, surgical intervention remains the choice in treating CRC. Traditional dosage forms used for treating CRC deliver drug to wanted as well as unwanted sites of drug action resulting in several adverse side effects...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章,评审
doi:10.3109/10837450.2012.696268
更新日期:2012-09-01 00:00:00
abstract::The aim of this study was to investigate isotropic mono- and diglyceride-based (MCMDG) systems, which are potential vehicles for injectable products containing both hydrophilic and lipophilic drugs. For two-component systems, MCMDG was mixed with various masses of water. For three-component systems, the samples were p...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1081/pdt-120027422
更新日期:2004-01-01 00:00:00
abstract::The objective of the present investigation was to formulate and evaluate orodispersible tablets (ODTs) of ondansetron HCl possessing sufficient mechanical strength by wet granulation or direct compression method. A combination of glycine and chitosan was employed for providing a sweet tasting disintegrating system. Th...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450902749279
更新日期:2009-01-01 00:00:00
abstract::Hypericin (Hyp), a natural hydrophobic and photoactive pigment, and methylene blue (MB), a hydrophilic cationic dye, are utilized as photosensitizer (PS) for photodynamic therapy of cancer. Bioadhesive and thermoresponsive polymeric systems can improve the drug availability by increasing the contact time between the s...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2019.1711394
更新日期:2020-04-01 00:00:00
abstract::The present study was aimed to optimize capsulated unfolding type gastroretentive bilayer film constituting immediate release (IR) layer of amlodipine besylate and sustained release (SR) layer of atorvastatin calcium. A three-factor, three-level Box-Behnken-design was used to optimize bilayer film with dual-release ch...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2019.1705486
更新日期:2020-04-01 00:00:00
abstract::Seven potential impurities, including by-products, starting materials and intermediates were identified in pharmaceutical substance quetiapine fumarate and characterized by spectroscopic methods (MS, IR, NMR). Based on these methods the structures of the impurities were assigned or confirmed as: impurity I: 2-(phenylt...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450802409388
更新日期:2009-01-01 00:00:00
abstract::The objective of this study was to develop and evaluate a novel microemulsion based gel formulation containing tazarotene for targeted topical therapy of acne. Psudoternary phase diagrams were constructed to obtain the concentration range of oil, surfactant, and co-surfactant for microemulsion formation. The optimized...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450.2015.1081610
更新日期:2016-12-01 00:00:00
abstract::To develop an effective therapeutic treatment, the potential of poly (lactic-co-glycolic acid)-polyethylene glycol-retinoic acid (PLGA-PEG-RA) polymeric micelles for targeted delivery of irinotecan to hepatocellular carcinoma (HepG2) and colorectal cancer cell lines (HT-29) was evaluated. PLGA-PEG-RA was synthesized b...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2017.1340950
更新日期:2018-01-01 00:00:00
abstract::The aim of this study was to investigate the effects of solid carriers and processing routes on the properties of amorphous solid dispersions of itraconazole. Three solid carriers with a range of surface properties were studied, (1) a mesoporous silicate, magnesium aluminum silicate (Neusilin US2), (2) a nonporous sil...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450.2014.959181
更新日期:2015-01-01 00:00:00
abstract::A comprehensive analytical solution that accounts for many factors and assumptions affecting drug concentration profile in the gastrointestinal tract was presented. A sensitivity analysis approach was utilized in order to investigate the importance of different parameters in the model. The partition coefficient is fou...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1081/pdt-100000741
更新日期:2001-01-01 00:00:00
abstract::When a nebulizer is evaluated by the Andersen Cascade Impactor (ACI), the flow rate is generally maintained at 28.3 L/min, as recommended by the manufacturer. However, the nebulizer flow rate that a patient inhales is only around 18 L/min. Because the drive flow of a nebulizer is approximately 6-8 L/min, the nebulized...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450701366937
更新日期:2007-01-01 00:00:00
abstract::Pharmaceutical aerosols have the potential to prevent pulmonary infectious diseases. Liposomal amphotericin B (LAMB, Ambisome, Astellas Pharma US, Deerfield, IL, USA) is approved as an intravenous infusion for empiric treatment of presumed fungal infections in neutropenic, febrile patients, as well as patients infecte...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450.2011.591803
更新日期:2011-11-01 00:00:00
abstract::Several processing and shipping stresses were investigated for their effect on the physical stability of recombinant human growth hormone (rhGH). These included exposure to air/water interfaces, adsorption to hydrophobic surfaces, freeze-thaw cycles, and temperature. The interfacially and thermally denatured hormone w...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837459709022619
更新日期:1997-05-01 00:00:00
abstract::The aim of the present work was the development of vaginal sponge-like dressings based on chitosan ascorbate (CS) and on hyaluronic acid sodium salt/lysine acetate (HAS) combination. Sponge-like dressings were prepared by freeze-drying and characterized for mechanical resistance and mucoadhesion. CS dressings show hig...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450.2010.531736
更新日期:2012-03-01 00:00:00
abstract::A prototype parenteral manufacturing facility based on isolation technology was designed, constructed, and commissioned at Warner-Lambert Co., Morris Plains, NJ, with emphasis on its application to research and development (R&D) settings. The facility contains closed isolators for holding, transferring, and manufactur...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1081/pdt-100102034
更新日期:2000-01-01 00:00:00
abstract::The main purpose of this work was to study the albendazole-cyclodextrins complexation equilibrium and to propose a suitable excipient to improve the solubility behavior and dissolution rate of albendazole. The complexation of albendazole with four cyclodextrins, alpha-CD, beta-CD, gamma-CD, and hydroxypropylated (HP)-...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837459809009867
更新日期:1998-08-01 00:00:00
abstract::A preliminary study of the feasibility of using near-infrared spectroscopy (NIRS) for the offline simultaneous determination of metoprolol tartrate (MTP) and hydrochlorothiazide (HTZ) in powders and tablets has been carried out. An industrial tableting process was simulated using an instrumented tablet press replicato...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450.2014.949268
更新日期:2015-01-01 00:00:00
abstract::Due to their light consistency and good spreadability, aqueous foams are considered as convenient and highly accepted drug carrier systems that are of great importance in the field of topical drug delivery. The production of a stable, easy to dose, preferably environmentally harmless foam formulation is challenging. T...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2020.1863426
更新日期:2020-12-27 00:00:00
abstract::The purpose of this study was to develop a benchtop apparatus to simulate the scale-up of the moist-heat sterilization process of sodium carboxymethylcellulose (CMC) gel and identify critical process parameters that affect the sterilized gel viscosity. A 600-ml benchtop Parr reactor was modified and used to achieve go...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1081/pdt-100101394
更新日期:1999-01-01 00:00:00
abstract::Ternary complexes of meloxicam (ML), a poorly water-soluble anti-inflammatory drug, with β-cyclodextrin (βCD) and polyethylene glycol (PEG) 6000 were prepared from an equimolar (ML-βCD) and 10% of PEG. Characterization of the ternary complex was carried out by differential scanning calorimetry and X-ray diffractometry...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450.2011.565347
更新日期:2012-09-01 00:00:00