Development and evaluation of a laboratory-scale apparatus to simulate the scale-up of a sterile semisolid and effects of manufacturing parameters on product viscosity.

abstract：:Nucleic acids therapeutic efficiency is generally limited by their low stability and intracellular bioavailability, and by the toxicity of the carriers used to deliver them to the target sites. Aminated poly(glycerol methacrylate) polymers are biodegradable and pH-sensitive polymers that have been used previously to d...

journal_title：Pharmaceutical development and technology

authors： Morsi NG,Ali SM,Elsonbaty SS,Afifi AA,Hamad MA,Gao H,Elsabahy M

更新日期：2018-04-01 00:00:00

abstract：:The objective of this study was to prepare pellets of thyme (Thymus vulgaris L.), stinging nettle (Urtica dioica L.) and sage (Salvia officinalis L.) dry extracts by extrusion-spheronization technique to improve technological properties and investigate dissolution profiles of pellets covered different levels of pH-sen...

journal_title：Pharmaceutical development and technology

authors： Kaledaite R,Bernatoniene J,Dvořáčková K,Gajdziok J,Muselík J,Pečiūra R,Masteikova R

更新日期：2015-11-01 00:00:00

abstract：:Quality by design (QbD) is an essential part of the modern approach to pharmaceutical quality. This study was conducted in the framework of a QbD project involving ramipril tablets. Preliminary work included identification of the critical quality attributes (CQAs) and critical process parameters (CPPs) based on the qu...

journal_title：Pharmaceutical development and technology

authors： Aksu B,Paradkar A,de Matas M,Özer Ö,Güneri T,York P

更新日期：2013-02-01 00:00:00

abstract：:Substituting spacer by another in noninvasive ventilation (NIV) involves many variables, e.g. total emitted dose (TED), mass median aerodynamic diameter (MMAD), type of spacer, total lung deposition and total systemic absorption, which must be adjusted to ensure patient optimum therapy. Data mining based on artificial...

journal_title：Pharmaceutical development and technology

authors： Hussein RRS,M A Ali A,Salem HF,Abdelrahman MM,Said ASA,Abdelrahim MEA

更新日期：2017-11-01 00:00:00

abstract：:This study reports on the impact of cyclodextrin addition on the phase behavior of microemulsion systems. Three distinct oil-in-water microemulsions were formulated and subjected to increasing concentrations of various cyclodextrins. The prepared formulations underwent visual, textural and microscopic characterization...

journal_title：Pharmaceutical development and technology

authors： Thakur SS,Solloway J,Stikkelman A,Seyfoddin A,Rupenthal ID

更新日期：2018-02-01 00:00:00

abstract：:Dual drug nanocrystals loaded nano embedded microparticles (DNEMs) were prepared for fixed dose combination of simvastatin (SIM) and ezetimibe (EZE) using NanoCrySP technology. The purpose was to generate nanonized SIM and EZE dispersed in matrix of single crystallization inducing excipient and investigate their in vi...

journal_title：Pharmaceutical development and technology

authors： Nandi S,Kaur A,Bansal AK

更新日期：2020-01-01 00:00:00

abstract：:The instability of protein and antigen(s) during encapsulation in biodegradable polymers by water-in-oil-in-water (w/o/w) encapsulation is well established. The aim of present study is to screen various additives to prevent the inactivation and loss of immunogenicity of HBsAg upon its exposure to the water/CH(2)Cl(2) ...

journal_title：Pharmaceutical development and technology

authors： Tomar P,Giri N,Karwasara VS,Pandey RS,Dixit VK

更新日期：2012-07-01 00:00:00

abstract：:Pharmaceutical aerosols have the potential to prevent pulmonary infectious diseases. Liposomal amphotericin B (LAMB, Ambisome, Astellas Pharma US, Deerfield, IL, USA) is approved as an intravenous infusion for empiric treatment of presumed fungal infections in neutropenic, febrile patients, as well as patients infecte...

journal_title：Pharmaceutical development and technology

authors： Alexander BD,Winkler TP,Shi S,Dodds Ashley ES,Hickey AJ

更新日期：2011-11-01 00:00:00

abstract：:In the current study, the influence of chitosan on the dissolution rate and bioavailability of acyclovir has been illustrated through the preparation of co-crystals by simple solvent change method. Chitosan was precipitated on acyclovir crystals using sodium citrate as the salting out agent. The pure drug and the prep...

journal_title：Pharmaceutical development and technology

authors： Allam AN,Naggar VF,El Gamal SS

更新日期：2013-07-01 00:00:00

abstract：:The hygroscopicity of Brequinar sodium, an organ transplant immunosuppressant, at 75% relative humidity highly depends on the crystal form or crystallinity of the drug substance. Hygroscopicity and ease of water uptake of three lots of Brequinar sodium were investigated. Those lots contained different impurities at le...

journal_title：Pharmaceutical development and technology

authors： Wu LS,Pang J,Hussain MA

更新日期：1996-04-01 00:00:00

abstract：:Elderly people, children and patients sometimes have difficulties swallowing tablets. To solve this problem, a novel method of preparing tablets that disintegrate rapidly in the mouth was developed. A tablet with high porosity is required for rapid disintegration, but such a tablet is generally fragile. To make a tabl...

journal_title：Pharmaceutical development and technology

authors： Sugimoto M,Matsubara K,Koida Y,Kobayashi M

更新日期：2001-11-01 00:00:00

abstract：:The objectives of this research were to evaluate the stability of lercanidipine in solution state and solid state and explore the compatibility of drug with oils, surfactants and cosurfactants as excipients. The effect of pH on the degradation in solution state was studied through pH-rate profile of lercanidipine in c...

journal_title：Pharmaceutical development and technology

authors： Parmar N,Amin S,Singla N,Kohli K

更新日期：2012-11-01 00:00:00

abstract：:The present study details the development of a small-scale spray-drying approach for the routine screening of amorphous solid dispersions (ASDs). This strategy aims to overcome the limitations of standard screening methodologies like solvent casting and quench cooling to predict drug-polymer miscibility of spray-dried...

journal_title：Pharmaceutical development and technology

authors： Ousset A,Bassand C,Chavez PF,Meeus J,Robin F,Schubert MA,Somville P,Dodou K

更新日期：2019-06-01 00:00:00

abstract：:The aim of this work is to evaluate the feasibility of hydrophilic silica aerogels as drug carriers and to investigate the influence of the aerogels properties on the release rate of poorly water-soluble drugs. Hydrophilic silica aerogels of different densities were loaded with two model drugs, ketoprofen and griseofu...

journal_title：Pharmaceutical development and technology

authors： Smirnova I,Suttiruengwong S,Seiler M,Arlt W

更新日期：2004-11-01 00:00:00

abstract：:The objective of this study was to develop a floating, pulsatile, multiparticulate drug delivery system intended for chronopharmacotherapy of arthritis. The floating pulsatile drug delivery has the advantage that a drug can be released in the upper gastrointestinal tract after a definite time period of no drug release...

journal_title：Pharmaceutical development and technology

authors： Gaikwad M,Belgamwar VS,Tekade A,Gattani S,Surana S

更新日期：2010-03-01 00:00:00

abstract：:Drug solubility testing in biorelevant media has become an indispensable tool in pharmaceutical development. Despite this importance, there is still an incomplete understanding of how poorly soluble compounds interact with these media. The aim of this study was to apply the concept of the apparent solubilization capac...

journal_title：Pharmaceutical development and technology

authors： Schwebel HJ,van Hoogevest P,Leigh ML,Kuentz M

更新日期：2011-06-01 00:00:00

abstract：:When a nebulizer is evaluated by the Andersen Cascade Impactor (ACI), the flow rate is generally maintained at 28.3 L/min, as recommended by the manufacturer. However, the nebulizer flow rate that a patient inhales is only around 18 L/min. Because the drive flow of a nebulizer is approximately 6-8 L/min, the nebulized...

journal_title：Pharmaceutical development and technology

authors： Zhou Y,Brasel TL,Kracko D,Cheng YS,Ahuja A,Norenberg JP,Kelly HW

更新日期：2007-01-01 00:00:00

abstract：:The purpose of this study was a comparative evaluation of miniaturized vs. University of Minnesota's (i.e., U of Minn. = Hiestand's) procedures for determining the tensile strength, indentation hardness, and bonding index (BI), one out of three Indices of Tableting Performance (ITP). Tableting properties of six direct...

journal_title：Pharmaceutical development and technology

authors： Lamey K,Schwartz J,Muller F

更新日期：2003-08-01 00:00:00

abstract：:Photon correlation spectroscopy (PCS) is compared with classic rheological measurements using the cone-and-plate technique for the determination of the viscosity of protein solutions. The potential advantages using PCS are small sample volume and fast determination of zero-shear viscosity. The present study assesses p...

journal_title：Pharmaceutical development and technology

authors： Wagner M,Reiche K,Blume A,Garidel P

更新日期：2013-07-01 00:00:00

abstract：:Understanding variability in excipient physico-chemical properties is becoming an important aspect of Quality-by-Design drug product development. However, present experimental methods have only been able to study a few physico-chemical properties for a few excipient lots due to time, cost, and sample gathering conside...

journal_title：Pharmaceutical development and technology

authors： Kushner J 4th

更新日期：2013-03-01 00:00:00

abstract：:The aim of the present work was to investigate the possibility of achieving buccal delivery of a problematic drug, acyclovir, from films based on chitosan hydrochloride (HCS) and polyacrylic acid sodium salt (PAA). At first, the ionic interaction between HCS and PAA in distilled water was investigated by means of rheo...

journal_title：Pharmaceutical development and technology

authors： Rossi S,Sandri G,Ferrari F,Bonferoni MC,Caramella C

更新日期：2003-01-01 00:00:00

abstract：:Dissolution profiles of various multiparticulate controlled-release dosage forms prepared by applying lipophilic materials using a hot-melt coating technique were analyzed to determine release kinetics. The dosage forms were prepared using a novel solid dispersion hot-melt fluid bed coating method. Various lipophilic ...

journal_title：Pharmaceutical development and technology

authors： Griffin EN,Niebergall PJ

更新日期：1999-01-01 00:00:00

abstract：:Aluminum hydroxide adjuvant was pretreated with six concentrations of potassium dihydrogen phosphate to produce a series of adjuvants with various degrees of phosphate substitution for surface hydroxyl. The adsorption of three phosphorylated proteins (alpha casein, dephosphorylated alpha casein, and ovalbumin) by the ...

journal_title：Pharmaceutical development and technology

authors： Iyer S,HogenEsch H,Hem SL

更新日期：2003-01-01 00:00:00

abstract：:The main objective of this research is to use the near-infrared diffuse reflectance method to evaluate and quantify the effects of hardness and porosity on the near-infrared spectras of tablets. To develop a model equation, validate the model and test the model predictive ability. Seven theophylline tablet formulation...

journal_title：Pharmaceutical development and technology

authors： Donoso M,Kildsig DO,Ghaly ES

更新日期：2003-01-01 00:00:00

abstract：:The objective of the study was to mask the unpleasant taste of captopril (CPT). Taste masking was achieved by complexation of CPT with a basic ion exchange resin, Dowex® 66, using the batch method. Dowex® 66 was used for the adsorption of CPT, and physical and chemical parameters of the CPT resinates complex were eval...

journal_title：Pharmaceutical development and technology

authors： Chikukwa MTR,Wesoly M,Korzeniowska AB,Ciosek-Skibinska P,Walker RB,Khamanga SMM

更新日期：2020-03-01 00:00:00

abstract：:This study investigates the physicochemical properties of glycyl-histidyl-lysine-copper (GHK-Cu) to support the development of a formulation for effective topical delivery. The solubility and distribution coefficients (log D) were investigated using conventional methods and GHK concentrations were quantified with a va...

journal_title：Pharmaceutical development and technology

authors： Badenhorst T,Svirskis D,Wu Z

更新日期：2016-03-01 00:00:00

abstract：:The biopharmaceutical assessment of new drug candidates based on their chemical structure is important in drug discovery and development. The scope of this study is to focus on lipophilic drugs and to clarify the role of their chemical predictors on oral bioavailability in humans. First their chemical properties were ...

journal_title：Pharmaceutical development and technology

authors： Kuentz MT,Arnold Y

更新日期：2009-01-01 00:00:00

abstract：:We have proposed a theory indicating the correlation between the dissolution rate and the heat of solution of drug substances. The initial dissolution rates of the drug substances containing amorphous were predicted accurately from their heats of solution. In this report, the possibility for the theory to estimate the...

journal_title：Pharmaceutical development and technology

authors： Yoshihashi Y,Yonemochi E,Terada K

更新日期：2002-01-01 00:00:00

abstract：:In this study, the degradation of Octastatin, a cyclic octapeptide analog of somatostatin, was examined as a function of pH, temperature, buffer, and ionic strength by reversed-phase gradient high-performance liquid chromatography. Degradation of Octastatin followed a first-order kinetics. Various buffer species such ...

journal_title：Pharmaceutical development and technology

authors： Jang SW,Woo BH,Lee JT,Moon SC,Lee KC,DeLuca PP

更新日期：1997-11-01 00:00:00

abstract：:Objective: Tanshinone IIA (TSN) and Tetramethylpyrazine (TMP) were combined in a composite, oil-in-water nanoemulsions (TSN/TMP O/W NEs) was prepared to prolong in vitro and vivo circulation time, and enhance the bioavailability of TSN. Material and methods: Physicochemical characterization of TSN/TMP O/W NEs was char...

journal_title：Pharmaceutical development and technology

authors： Wang B,Hong L,Liu Y,Bedingfield SK,Zhang C,Peng C,Qian J,Zha L

更新日期：2019-12-01 00:00:00