Eudragit-based transdermal delivery system of pentazocine: Physico-chemical, in vitro and in vivo evaluations.

Abstract:

:The present study was aimed to develop a matrix-type transdermal formulation of pentazocine using mixed polymeric grades of Eudragit RL/RS. The possible interaction between drug and polymer used were characterized by FTIR, DSC and X-RD. X-RD study indicates a change of state of drug from crystalline to amorphous in the matrix films prepared. The matrix transdermal films of pentazocine were evaluated for physical parameters and in vitro dissolution characteristic using Cygnus' sandwich patch holder. Irrespective of the grades of Eudragit polymer used, the thickness and weight per patch were similar. In vitro dissolution study revealed that, with an increase in the proportion of Eudragit RS (slightly permeable) type polymer, dissolution half life (t(50%)) increases and dissolution rate constant value decreases. Selected formulations were chosen for these pharmacokinetic studies in healthy rabbits. The relevance of difference in the in vitro dissolution rate profile and pharmacokinetic parameters (C(max), t(max), AUC((s)), t(1/2,) K(el), and MRT) were evaluated statistically. In vitro dissolution profiles (DRC and t(50%)) and pharmacokinetic parameters showed a significant difference between test products (P<0.01). Quantitatively good correlation was found between the percentage of drug absorbed from the transdermal patches and AUC((s)).

journal_name

Pharm Dev Technol

authors

Chandak AR,Prasad Verma PR

doi

10.3109/10837450903188501

subject

Has Abstract

pub_date

2010-06-01 00:00:00

pages

296-304

issue

3

eissn

1083-7450

issn

1097-9867

journal_volume

15

pub_type

杂志文章
  • Studies on preparation of carbamazepine (CBZ) supersaturatable self-microemulsifying (S-SMEDDS) formulation and relative bioavailability in beagle dogs.

    abstract::The main purpose of this work was to develop a supersaturatable self-microemulsifying drug delivery system (S-SMEDDS) of carbamazepine (CBZ). S-SMEDDS of CBZ was prepared and drug precipitation behavior, dissolution rate in vitro and particle size distribution were evaluated. The relative bioavailability of S-SMEDDS f...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837451003774419

    authors: Zhang N,Zhang W,Jin Y,Quan DQ

    更新日期:2011-08-01 00:00:00

  • Effect of degree of methoxylation and particle size on compression properties and compactibility of pectin powders.

    abstract::This study examines the effect of the degree of methoxylation (DM) and particle size on compression properties and compactibility of pectin powders. A powder classification system based on sequential handling of compression parameters was applied. A single size fraction (90-125 μm) of pectin powders with DM values ran...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2010.535831

    authors: Salbu L,Bauer-Brandl A,Alderborn G,Tho I

    更新日期:2012-05-01 00:00:00

  • A method for the preparation of sustained release-coated Metoprolol Succinate pellet-containing tablets.

    abstract::The purpose of this study was to develop a method to prepare Metoprolol Succinate (MS) sustained release pellets and compress them into pellet-containing tablets without losing sustained release property. The drug layered pellets were coated with Eudragit NE 30D to obtain a sustained release (SR) property. The mechani...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2015.1081612

    authors: Yang Z,Yu J,Yang T,Xing H,Zhang J,Xian L,Ding P,Wang D

    更新日期:2016-12-01 00:00:00

  • Controlled release of DSBP from genipin-crosslinked gelatin thin films.

    abstract::Controlled release of a marker drug, 4,4'-bis(2-sulfostyryl) biphenyl (DSBP) from genipin crosslinked gelatin thin films, with application to drug delivery by transdermal patches is studied in this paper. A simple method for fabrication of nano-thin films, using basic lab equipment is introduced. This method consists ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450802309679

    authors: Abbasi A,Eslamian M,Heyd D,Rousseau D

    更新日期:2008-01-01 00:00:00

  • The impact of crystallinity on Brequinar sodium hygroscopicity.

    abstract::The hygroscopicity of Brequinar sodium, an organ transplant immunosuppressant, at 75% relative humidity highly depends on the crystal form or crystallinity of the drug substance. Hygroscopicity and ease of water uptake of three lots of Brequinar sodium were investigated. Those lots contained different impurities at le...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837459609031417

    authors: Wu LS,Pang J,Hussain MA

    更新日期:1996-04-01 00:00:00

  • Formulation factors affecting the isomerization rate of betamethasone-17-valerate in a developmental hydrophilic cream - a HPLC and microscopy based stability study.

    abstract::The formulation of betamethasone-17-valerate (BV) into topical medicines presents a significant challenge for the formulation chemist. The substance is susceptible to acid and base catalyzed isomerization in aqueous environments, which results in valerate transesterification from carbon 17 to carbon 21 of the steroid ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2016.1143003

    authors: Byrne J,Wyraz A,Velasco-Torrijos T,Reinhardt R

    更新日期:2017-06-01 00:00:00

  • Properties of bioadhesive ketoprofen liquid suppositories: preparation, determination of gelation temperature, viscosity studies and evaluation of mechanical properties using texture analyzer by 4 × 4 factorial design.

    abstract:CONTEXT:Development and evaluation of thermosensitive and bioadhesive liquid suppositories containing ketoprofen (KP). OBJECTIVE:This study was conducted to develope thermosensitive and bioadhesive liquid suppositories containing KP using poloxamer and different bioadhesive polymers and to investigate their gelation t...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2013.846373

    authors: Ozgüney I,Kardhiqi A

    更新日期:2014-12-01 00:00:00

  • Effect of solid state transition on the physical stability of suspensions containing bupivacaine lipid microparticles.

    abstract::Bupivacaine lipid microparticles were prepared and evaluated as a parenteral sustained-release dosage form for postoperative pain management. Bupivacaine free base was incorporated into a molten tristearin matrix and lipid micro-particles were subsequently formed from this molten mixture by a spray-congealing process....

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-54475

    authors: Li LC,Zhu L,Song JF,Deng JS,Bandopadhyay R,Wurster DE

    更新日期:2005-01-01 00:00:00

  • Gas-saturated solution process to obtain microcomposite particles of alpha lipoic acid/hydrogenated colza oil in supercritical carbon dioxide.

    abstract::Alpha lipoic acid (ALA), an active substance in anti-aging products and dietary supplements, need to be masked with an edible polymer to obscure its unpleasant taste. However, the high viscosity of the ALA molecules prevents them from forming microcomposites with masking materials even in supercritical carbon dioxide ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2015.1049707

    authors: Mishima K,Honjo M,Sharmin T,Ito S,Kawakami R,Kato T,Misumi M,Suetsugu T,Orii H,Kawano H,Irie K,Sano K,Mishima K,Harada T,Ouchi M

    更新日期:2016-09-01 00:00:00

  • Interaction of [D-Trp6, Des-Gly10] LHRH ethylamide and hydroxy propyl beta-cyclodextrin (HPbetaCD): thermodynamics of interaction and protection from degradation by alpha-chymotrypsin.

    abstract:PURPOSE:The purpose of this study is to investigate the mechanisms and thermodynamics of the interaction between hydroxypropyl beta-cyclodextrin (HPdetaCD) and [D-Trp6, des-Gly10] LHRH ethylamide (deslorelin), a peptide drug. METHODS:We used UV and fluorescence spectroscopy to study the interaction of HPbetaCD and des...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-120000297

    authors: Koushik KN,Bandi N,Kompella UB

    更新日期:2001-11-01 00:00:00

  • Phase transition of a microemulsion upon addition of cyclodextrin - applications in drug delivery.

    abstract::This study reports on the impact of cyclodextrin addition on the phase behavior of microemulsion systems. Three distinct oil-in-water microemulsions were formulated and subjected to increasing concentrations of various cyclodextrins. The prepared formulations underwent visual, textural and microscopic characterization...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2017.1371191

    authors: Thakur SS,Solloway J,Stikkelman A,Seyfoddin A,Rupenthal ID

    更新日期:2018-02-01 00:00:00

  • Preparation and in vitro characterization of diltiazem hydrochloride loaded alginate microspheres.

    abstract::The main objective of the present study was to improve bioavailability of diltiazem hydrochloride and decrease the frequency of dosage form administration by increasing the encapsulation efficiency of the drug, residence time of the dosage form at the site of absorption and sustained release of the drug from the deliv...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450802626304

    authors: Sultana Y,Mall S,Maurya DP,Kumar D,Das M

    更新日期:2009-01-01 00:00:00

  • Evaluation of the gum from Hakea gibbosa as a sustained-release and mucoadhesive component in buccal tablets.

    abstract::The objective of this paper was to evaluate the mucoadhesive and sustained-release properties of the water-soluble gum obtained from Hakea gibbosa (hakea), for the formulation of buccal tablets. Flatfaced tablets containing hakea were formulated using chlorpheniramine maleate (CPM) as a model drug. Two types of tablet...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-100101370

    authors: Alur HH,Pather SI,Mitra AK,Johnston TP

    更新日期:1999-08-01 00:00:00

  • Developing an injectable formula containing an oxygen-sensitive drug: a case study of danofloxacin injectable.

    abstract::The purpose of this study was to assess the impact of impurities in formulation components, antioxidants, formulation pH, and processing/packaging on the extent of color change associated with oxidation of danofloxacin injectable. The methods used in this study include reversed-phase HPLC, UV-VIS spectrophotometry, at...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-100101384

    authors: Kasraian K,Kuzniar AA,Wilson GG,Wood JA

    更新日期:1999-01-01 00:00:00

  • The effect of composition on the tableting indices of binary powder mixtures.

    abstract::The purpose of this study was to investigate the effect of the composition of a binary powder mixture on the bonding index, the brittle fracture index, and the strain index, as defined by Hiestand. The studies involved tensile strength and dynamic indentation hardness determinations of square compacts, the solid fract...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837459709022630

    authors: Majuru S,Wurster DE

    更新日期:1997-11-01 00:00:00

  • Drug-polymer mixed coating: a new approach for controlling drug release rates in pellets.

    abstract::A new approach to developing a drug-polymer mixed coat for highly water-soluble diltiazem pellets was investigated at different coating levels. Drug layering and the coating procedures were performed using a bottom spray fluidized bed coater. Drug pellets were coated with Eudragit NE40 (NE40) alone and in combination ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450500464008

    authors: Nisar ur Rahman,Yuen KH,Khan NA,Wong JW

    更新日期:2006-02-01 00:00:00

  • Dual drug nanocrystals loaded microparticles for fixed dose combination of simvastatin and ezetimibe.

    abstract::Dual drug nanocrystals loaded nano embedded microparticles (DNEMs) were prepared for fixed dose combination of simvastatin (SIM) and ezetimibe (EZE) using NanoCrySP technology. The purpose was to generate nanonized SIM and EZE dispersed in matrix of single crystallization inducing excipient and investigate their in vi...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2019.1669181

    authors: Nandi S,Kaur A,Bansal AK

    更新日期:2020-01-01 00:00:00

  • Purification of pharmaceutical excipients with supercritical fluid extraction.

    abstract::Supercritical fluid extraction (SFE), with carbon dioxide as the solvent, was tested for its ability to remove common reactive impurities from several pharmaceutical excipient powders including starch, microcrystalline cellulose (MCC), hydroxypropylcellulose (HPC), polyethylene oxide (PEO), and polyvinylpyrrolidone (P...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450500299958

    authors: Ashraf-Khorassani M,Taylor LT,Waterman KC,Narayan P,Brannegan DR,Reid GL

    更新日期:2005-01-01 00:00:00

  • Simultaneous determination of levodopa and carbidopa in levodopa-carbidopa tablets by ATR-FTIR spectrometry.

    abstract::A novel analytical procedure has been developed for quantitative determination of levodopa and carbidopa in aqueous binary solutions acidified by HCl and without any other sample pretreatment. The method is based partially on least squares treatment of data obtained by attenuated total reflectance Fourier transform in...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450701481249

    authors: Khanmohammadi M,Mobedi E,Garmarudi AB,Mobedi H,Kargosha K

    更新日期:2007-01-01 00:00:00

  • Identification of physical-chemical variables affecting particle size following precipitation using a supercritical fluid.

    abstract::The physical-chemical processing variables affecting particle size following precipitation using the supercritical antisolvent (SAS) method were investigated by varying both the composition of the feed solvent and the structure of the solute, using a series of steroids. The key factor influencing particle size in thes...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450600561299

    authors: Sacha GA,Schmitt WJ,Nail SL

    更新日期:2006-01-01 00:00:00

  • Orally disintegrating tablets and orally disintegrating mini tablets - novel dosage forms for pediatric use.

    abstract::The oral administration route is considered to be the most widely used route because of its convenience of administration and manufacturing. Dosage forms, like orally disintegrating tablets (ODTs), mini tablets, and orally disintegrating mini tablets (ODMTs), are recognized as promising for use in pediatric patients. ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章,评审

    doi:10.1080/10837450.2019.1615090

    authors: Comoglu T,Dilek Ozyilmaz E

    更新日期:2019-09-01 00:00:00

  • Gastroretentive bilayer film for sustained release of atorvastatin calcium and immediate release of amlodipine besylate: pharmaceutical, pharmacokinetic evaluation, and IVIVC.

    abstract::The present study was aimed to optimize capsulated unfolding type gastroretentive bilayer film constituting immediate release (IR) layer of amlodipine besylate and sustained release (SR) layer of atorvastatin calcium. A three-factor, three-level Box-Behnken-design was used to optimize bilayer film with dual-release ch...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2019.1705486

    authors: Porwal A,Dwivedi H,Pathak K

    更新日期:2020-04-01 00:00:00

  • Isotropic systems of medium-chain mono- and diglycerides for solubilization of lipophilic and hydrophilic drugs.

    abstract::The aim of this study was to investigate isotropic mono- and diglyceride-based (MCMDG) systems, which are potential vehicles for injectable products containing both hydrophilic and lipophilic drugs. For two-component systems, MCMDG was mixed with various masses of water. For three-component systems, the samples were p...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-120027422

    authors: Sari P,Razzak M,Tucker IG

    更新日期:2004-01-01 00:00:00

  • Amorphization of itraconazole by inorganic pharmaceutical excipients: comparison of excipients and processing methods.

    abstract::The aim of this study was to investigate the effects of solid carriers and processing routes on the properties of amorphous solid dispersions of itraconazole. Three solid carriers with a range of surface properties were studied, (1) a mesoporous silicate, magnesium aluminum silicate (Neusilin US2), (2) a nonporous sil...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2014.959181

    authors: Grobelny P,Kazakevich I,Zhang D,Bogner R

    更新日期:2015-01-01 00:00:00

  • Relating formulation variables to in vitro dissolution using an artificial neural network.

    abstract::The purpose of this paper was to investigate the effect of several experimental variables on the ability of a neural network to predict in vitro dissolution rate as a function of product formulation changes. Neural network software was trained with sets of hypothetical and experimental data consisting of 4-15 formulat...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837459709031442

    authors: Ebube NK,McCall T,Chen Y,Meyer MC

    更新日期:1997-08-01 00:00:00

  • Influence of impactor operating flow rate on particle size distribution of four jet nebulizers.

    abstract::When a nebulizer is evaluated by the Andersen Cascade Impactor (ACI), the flow rate is generally maintained at 28.3 L/min, as recommended by the manufacturer. However, the nebulizer flow rate that a patient inhales is only around 18 L/min. Because the drive flow of a nebulizer is approximately 6-8 L/min, the nebulized...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450701366937

    authors: Zhou Y,Brasel TL,Kracko D,Cheng YS,Ahuja A,Norenberg JP,Kelly HW

    更新日期:2007-01-01 00:00:00

  • Recent progress in transdermal sonophoresis.

    abstract::Transdermal drug administration has a number of advantages that cannot be leveraged for therapeutic benefits because of the robust barrier provided by the stratum corneum. One of the promising techniques for circumventing the stratum corneum is sonophoresis - the use of ultrasound for facilitating transdermal drug del...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章,评审

    doi:10.3109/10837450.2015.1116566

    authors: Ita K

    更新日期:2017-06-01 00:00:00

  • Development and in vivo evaluation of baicalin-loaded W/O nanoemulsion for lymphatic absorption.

    abstract::Background: Lymphatic formations that effectively eradicate the virus in the lymphatic system will be therapeutically advantagous in hepatitis B virus (HBV) infection. Lipid-based formulation is often used to deliver drug via the lymphatic system. Baicalin nanoemulsion may be a promising drug delivery system for impro...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2019.1646757

    authors: Xu Q,Zhou A,Wu H,Bi Y

    更新日期:2019-11-01 00:00:00

  • Formulation design, challenges, and development considerations for fixed dose combination (FDC) of oral solid dosage forms.

    abstract::Fixed dose combination (FDC) products are common in the treatment of hypertension, diabetes, human immunodeficiency virus, and tuberculosis. They make it possible to combine two or more drug molecules with different modes of pharmacological actions in a single dosing unit and optimize the treatment. From a patient per...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章,评审

    doi:10.3109/10837450.2012.660699

    authors: Desai D,Wang J,Wen H,Li X,Timmins P

    更新日期:2013-11-01 00:00:00

  • Rapid formulation screening with a Multipart Microscale Fluid bed Powder processor.

    abstract::The aim of this study was to investigate early formulation screening in small scale with a miniaturized fluid bed device. Altogether eight different batches were granulated in a Multipart Microscale Fluid bed Powder processor (MMFP) with constant process conditions using electrostatic atomization. Atomization voltage ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837451003739271

    authors: Kivikero N,Murtomaa M,Antikainen O,Hatara J,Juppo AM,Sandler N

    更新日期:2011-08-01 00:00:00