Glucose-sensitive gel rheology of dextran-concanavalin A mixtures suitable for self-regulating insulin delivery.

abstract：:In this study, we developed a one-step method to prepare ibuprofen fast- and sustained-release complex preparation. It was based on a double jets electrospinning process. Ibuprofen, a poorly water-soluble drug, was electrospun into fibers with polyvinyl pyrrolidone and hydroxypropyl methyl cellulose by two jets, respe...

journal_title：Pharmaceutical development and technology

authors： Che X,Xue J,Zhang J,Yang X,Wang L

更新日期：2020-07-01 00:00:00

abstract：:The first-line therapy for moderate to severe benign prostatic hyperplasia is the oral therapy by alfuzosin hydrochloride. Unfortunately, the oral therapy of alfuzosin is associated with several route-specific systemic side-effects. The current study was aimed to develop a prototype transdermal patch system for alfuzo...

journal_title：Pharmaceutical development and technology

authors： Nair AB,Vaka SR,Gupta S,Repka MA,Murthy SN

更新日期：2012-03-01 00:00:00

abstract：:Objective: A polymer-based nanoparticle was constructed to target sorafenib delivery to colorectal carcinoma cells and decrease the side effects of the drug.Methods: Sorafenib-loaded nanoparticles (S-NPs) based on PEG-PLGA were prepared using a double emulsion solvent evaporation method. The properties of S-NPs were e...

journal_title：Pharmaceutical development and technology

authors： Li N,Chen Y,Sun H,Huang T,Chen T,Jiang Y,Yang Q,Yan X,Wu M

更新日期：2020-06-01 00:00:00

abstract：:The purpose of this study was to improve the sensitivity and accuracy of quantitative analysis of polymorphic mixtures. Various techniques such as hand grinding and mixing (in mortar and pestle), air jet milling and ball milling for micronization of particle and mixing were used to prepare binary mixtures. Using these...

journal_title：Pharmaceutical development and technology

authors： Alam S,Patel S,Bansal AK

更新日期：2010-09-01 00:00:00

abstract：:In recent years, drug delivery systems such as liposomes and microparticles have been used in clinic for the treatment of different diseases and from a regulatory point of view, a parenterally applied drug and drug delivery systems must be sterile and pyrogen free. Radiation sterilization is a method recognized by pha...

journal_title：Pharmaceutical development and technology

authors： Sakar F,Özer AY,Erdogan S,Ekizoglu M,Kart D,Özalp M,Colak S,Zencir Y

更新日期：2017-09-01 00:00:00

abstract：:In the present study, Simvastatin was incorporated in emulsion of soybean oil and propylene glycol monocaprylate as oily phase and Tween 80 and Cremophor EL as surfactants and also their mixtures. Dry adsorbed emulsions were prepared by using colloidal silicon dioxide in varying proportions to adsorb the liquid emulsi...

journal_title：Pharmaceutical development and technology

authors： Dixit RP,Nagarsenker MS

更新日期：2007-01-01 00:00:00

abstract：CONTEXT:Freeze-drying in presence of excipients is a common practice to stabilize biomacromolecular formulations. The composition of this formulation is known to affect the quality of the final product. OBJECTIVE:The aim of this study was to evaluate freeze-drying in well-plates as a high throughput platform for formu...

journal_title：Pharmaceutical development and technology

authors： Trnka H,Rantanen J,Grohganz H

更新日期：2015-01-01 00:00:00

abstract：:The main objective of this study was to design positively charged Levofloxacin Hemihydrate (Levo-h)-loaded nanoparticles with improved entrapment efficiency and antibacterial activity. PLGA alone or in combinations with Eudragit® RLPO or RS30D with or without positively charged inducing agent; 1,2-dioleoyl-3-trimethyl...

journal_title：Pharmaceutical development and technology

authors： Hasan AA,Sabry SA,Abdallah MH,El-Damasy DA

更新日期：2016-09-01 00:00:00

abstract：:Dual drug nanocrystals loaded nano embedded microparticles (DNEMs) were prepared for fixed dose combination of simvastatin (SIM) and ezetimibe (EZE) using NanoCrySP technology. The purpose was to generate nanonized SIM and EZE dispersed in matrix of single crystallization inducing excipient and investigate their in vi...

journal_title：Pharmaceutical development and technology

authors： Nandi S,Kaur A,Bansal AK

更新日期：2020-01-01 00:00:00

abstract：:This article describes a method to quantitatively track the solvation of HPC in a non-aqueous solvent system during topical gel manufacture. Where visual observation and microscopy could not establish a trend, straight-forward rheological profiling demonstrated a correlation between increased solvation of hydroxypropy...

journal_title：Pharmaceutical development and technology

authors： Potuck A,Leming R,Lam S

更新日期：2019-04-01 00:00:00

abstract：:A paddle method for measurement of the disintegrating time of orally disintegrating tablets with rizatriptan benzoate as a model drug was evaluated. The paddle method employed a dissolution test assembly with tablets immersed in disintegrating medium through a fastened sinker. Paddle stirring rate, opening of the sink...

journal_title：Pharmaceutical development and technology

authors： Que L,Wu W,Cheng X,Hu T

更新日期：2006-01-01 00:00:00

abstract：:This paper proposes the development of a drug product Manufacturing Classification System (MCS) based on processing route. It summarizes conclusions from a dedicated APS conference and subsequent discussion within APS focus groups and the MCS working party. The MCS is intended as a tool for pharmaceutical scientists t...

journal_title：Pharmaceutical development and technology

authors： Leane M,Pitt K,Reynolds G,Manufacturing Classification System (MCS) Working Group.

更新日期：2015-01-01 00:00:00

abstract：:The present study was aimed to develop a matrix-type transdermal formulation of pentazocine using mixed polymeric grades of Eudragit RL/RS. The possible interaction between drug and polymer used were characterized by FTIR, DSC and X-RD. X-RD study indicates a change of state of drug from crystalline to amorphous in th...

journal_title：Pharmaceutical development and technology

authors： Chandak AR,Prasad Verma PR

更新日期：2010-06-01 00:00:00

abstract：:Stability of captopril in a controlled release formulation has been a challenge for some time. The sustained release of captopril from floating matrices has been studied varying the antioxidant load, the sodium bicarbonate proportion and the compaction pressure. Although in many cases the effect of compaction pressure...

journal_title：Pharmaceutical development and technology

authors： Jiménez-Martínez I,Domínguez-Ramírez AM,Villafuerte-Robles L

更新日期：2009-07-22 00:00:00

abstract：OBJECTIVE:The purpose of the present investigation was to prepare a plasma stable, pH-sensitive niosomal formulation to enhance Sirolimus efficacy and selectivity. MATERIALS AND METHODS:pH-sensitive niosomal formulations bearing PEG-Poly (monomethyl itaconate)-CholC6 (PEG-PMMI-CholC6) copolymers and cholesteryl hemisu...

journal_title：Pharmaceutical development and technology

authors： Ghanbarzadeh S,Khorrami A,Pourmoazzen Z,Arami S

更新日期：2015-05-01 00:00:00

abstract：:This paper explores the utility of aqueous solubility of structurally similar drugs in predicting optimum conditions for extrusion and spheronization of pellets using response surface methodology. Pharmacologically active xanthine derivatives exhibiting widely varying aqueous solubility were used to determine optimum ...

journal_title：Pharmaceutical development and technology

authors： Hileman GA,Upadrashta SM,Neau SH

更新日期：1997-02-01 00:00:00

abstract：:Alpha lipoic acid (ALA), an active substance in anti-aging products and dietary supplements, need to be masked with an edible polymer to obscure its unpleasant taste. However, the high viscosity of the ALA molecules prevents them from forming microcomposites with masking materials even in supercritical carbon dioxide ...

journal_title：Pharmaceutical development and technology

authors： Mishima K,Honjo M,Sharmin T,Ito S,Kawakami R,Kato T,Misumi M,Suetsugu T,Orii H,Kawano H,Irie K,Sano K,Mishima K,Harada T,Ouchi M

更新日期：2016-09-01 00:00:00

abstract：:The effect of some processing and formulation variables on the stability of tablets containing a crystalline salt of a triazine derivative was studied. The salt has a relatively low melting point and a low microenvironmental pH due to the weakly basic nature of the parent compound (pKa = 4.0). This compound decomposes...

journal_title：Pharmaceutical development and technology

authors： Badawy S,Vickery R,Shah K,Hussain M

更新日期：2004-08-01 00:00:00

abstract：:The effect of six factors: spray gun, formulation, inlet temperature, atomizing air pressure, fan air pressure, and gun-bed distance, on the final adhesion of the film coat to the tablet core were assessed. The method used was based on an experimental design, Resolution IV, that allowed the main effects to be free fro...

journal_title：Pharmaceutical development and technology

authors： Khan H,Fell JT,Macleod GS

更新日期：2005-01-01 00:00:00

abstract：:The objective of the study was to mask the unpleasant taste of captopril (CPT). Taste masking was achieved by complexation of CPT with a basic ion exchange resin, Dowex® 66, using the batch method. Dowex® 66 was used for the adsorption of CPT, and physical and chemical parameters of the CPT resinates complex were eval...

journal_title：Pharmaceutical development and technology

authors： Chikukwa MTR,Wesoly M,Korzeniowska AB,Ciosek-Skibinska P,Walker RB,Khamanga SMM

更新日期：2020-03-01 00:00:00

abstract：:The purpose of this study was to develop a benchtop apparatus to simulate the scale-up of the moist-heat sterilization process of sodium carboxymethylcellulose (CMC) gel and identify critical process parameters that affect the sterilized gel viscosity. A 600-ml benchtop Parr reactor was modified and used to achieve go...

journal_title：Pharmaceutical development and technology

authors： Chu PI,Doyle D

更新日期：1999-01-01 00:00:00

abstract：:The aim of the present work was to investigate the possibility of achieving buccal delivery of a problematic drug, acyclovir, from films based on chitosan hydrochloride (HCS) and polyacrylic acid sodium salt (PAA). At first, the ionic interaction between HCS and PAA in distilled water was investigated by means of rheo...

journal_title：Pharmaceutical development and technology

authors： Rossi S,Sandri G,Ferrari F,Bonferoni MC,Caramella C

更新日期：2003-01-01 00:00:00

abstract：:Tablet hardness, a measure of the breaking force of a tablet, is based on numerous factors. These include the shape of the tablet and the mode of the application of force. For instance, when a pentagonal-shaped tablet was tested with a traditional hardness tester with flat platens, there was a large variation in hardn...

journal_title：Pharmaceutical development and technology

authors： Malladi J,Sidik K,Wu S,McCann R,Dougherty J,Parab P,Carragher T

更新日期：2017-03-01 00:00:00

abstract：:The aim of this study was to prepare a highly porous multiparticulate dosage form containing cilostazol for gastroretentive drug delivery. The floating pellets were prepared with glyceryl behenate as a matrix former and camphor as a sublimating agent by extrusion/spheronization and sublimation under vacuum. Granules p...

journal_title：Pharmaceutical development and technology

authors： Hwang KM,Byun W,Cho CH,Park ES

更新日期：2018-06-01 00:00:00

abstract：:ABSTRCT Felodipine has been widely used as a poorly water-soluble model drug for various studies to improve its oral bioavailability and in vivo efficacy. In this study, we developed amorphous solid dispersions (ASDs) via spray drying to enhance the bioavailability of felodipine through using natural zein protein as a...

journal_title：Pharmaceutical development and technology

authors： Zhang H,Liu X,Ma X

更新日期：2020-12-01 00:00:00

abstract：CONTEXT:The recent US Food and Drug Administration (FDA) legislation has introduced the evaluation of the Design Space of critical process parameters in manufacturing processes. In freeze-drying, a "formulation" is expected to be robust when minor deviations of the product temperature do not negatively affect the final...

journal_title：Pharmaceutical development and technology

authors： Schneid SC,Stärtzel PM,Lettner P,Gieseler H

更新日期：2011-11-01 00:00:00

abstract：:The objective of this investigation was to formulate ocular inserts of gatifloxacin sesquehydrate to achieve controlled drug release. Drug reservoir was prepared using hydrophilic polymers, namely polyvinyl alcohol and polyvinyl pyrrolidone. The rate controlling membrane was prepared using hydrophobic ethyl cellulose ...

journal_title：Pharmaceutical development and technology

authors： Patel UL,Chotai NP,Nagda CD

更新日期：2012-01-01 00:00:00

abstract：:In this study, we designed a polymersome system for the controlled release of methotrexate (MTX) as an anticancer drug with the objective of improving the loading efficiency of the drug in polymersomes as well as achievement of an efficient control on the release rate of drug from nanocarriers. We synthesized mono met...

journal_title：Pharmaceutical development and technology

authors： Nosrati H,Adinehvand R,Manjili HK,Rostamizadeh K,Danafar H

更新日期：2019-01-01 00:00:00

abstract：:The principal purpose of the present study was to prepare and characterize a complex drug delivery system consisting of Nafarelin-poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanoparticles (NPs) in combination with sodium alginate/poloxamer 407 in situ gel. Nafarelin-loaded PHBV NPs were prepared via double em...

journal_title：Pharmaceutical development and technology

authors： Alizadeh B,Bahari Javan N,Akbari Javar H,Khoshayand MR,Dorkoosh F

更新日期：2018-02-01 00:00:00

abstract：:Pulmonary delivery of peptides remains an important, noninvasive route of administration that is attractive because it offers high bioavailability and patient compliance. Optimization of particle characteristics for deposition in the deep regions of the lung after inhalation and retention of peptide stability are key ...

journal_title：Pharmaceutical development and technology

authors： Poursina N,Vatanara A,Rouini MR,Gilani K,Rouholamini Najafabadi A

更新日期：2017-09-01 00:00:00