Abstract:
:Stability of captopril in a controlled release formulation has been a challenge for some time. The sustained release of captopril from floating matrices has been studied varying the antioxidant load, the sodium bicarbonate proportion and the compaction pressure. Although in many cases the effect of compaction pressure remains hidden, actual results show that matrices compacted at 55 MPa have smaller density and float in the dissolution medium while those compacted at 165 MPa float only adding sodium bicarbonate. The increase of compaction pressure reduces the hydration volume and increases the time necessary to attain its maximum. These changes are attributed to lower matrix porosity and to the consequent diminution of water and drug transport. Increasing ascorbic acid proportions increase the matrix hydration volume and the drug released. The use of sodium ascorbate and the substitution of 15% polymer with sodium bicarbonate reduce the matrix hydration volume, shorten the matrix hydration process and increase the drug released. This is attributed to carbon dioxide bubbles that decrease the matrix coherence and expand the matrix volume, facilitating drug dissolution and only a limited further matrix expansion. The antioxidant protection provided by sodium ascorbate was lesser of that of ascorbic acid because of greater molecular mass and lesser release rate.
journal_name
Pharm Dev Technoljournal_title
Pharmaceutical development and technologyauthors
Jiménez-Martínez I,Domínguez-Ramírez AM,Villafuerte-Robles Ldoi
10.1080/10837450903110737subject
Has Abstractpub_date
2009-07-22 00:00:00eissn
1083-7450issn
1097-9867pub_type
杂志文章abstract::A novel analytical procedure has been developed for quantitative determination of levodopa and carbidopa in aqueous binary solutions acidified by HCl and without any other sample pretreatment. The method is based partially on least squares treatment of data obtained by attenuated total reflectance Fourier transform in...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450701481249
更新日期:2007-01-01 00:00:00
abstract::Two types of casein hydrolysates, casein A (mean peptide length 3.3) and casein B (mean peptide length 17.4) were prepared by the enzymatic hydrolysis of casein, and their effects on in vitro dissolution rates and oral bioavailability of drugs were evaluated. The in vitro dissolution behavior of the kneaded mixture of...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837459809028499
更新日期:1998-05-01 00:00:00
abstract::The main purpose of this work was to develop a supersaturatable self-microemulsifying drug delivery system (S-SMEDDS) of carbamazepine (CBZ). S-SMEDDS of CBZ was prepared and drug precipitation behavior, dissolution rate in vitro and particle size distribution were evaluated. The relative bioavailability of S-SMEDDS f...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837451003774419
更新日期:2011-08-01 00:00:00
abstract::The use of rice bran (RB), soybean (SB) or sunflower seed (SF) oils to prepare lipid-core nanocapsules (LNCs) as controlled drug delivery systems was investigated. LNCs were prepared by interfacial deposition using the preformed polymer method. All formulations showed negative zeta potential and adequate nanotechnolog...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450.2013.829097
更新日期:2014-11-01 00:00:00
abstract::The present study was aimed to optimize capsulated unfolding type gastroretentive bilayer film constituting immediate release (IR) layer of amlodipine besylate and sustained release (SR) layer of atorvastatin calcium. A three-factor, three-level Box-Behnken-design was used to optimize bilayer film with dual-release ch...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2019.1705486
更新日期:2020-04-01 00:00:00
abstract::The objective of the present investigation was to formulate and evaluate orodispersible tablets (ODTs) of ondansetron HCl possessing sufficient mechanical strength by wet granulation or direct compression method. A combination of glycine and chitosan was employed for providing a sweet tasting disintegrating system. Th...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450902749279
更新日期:2009-01-01 00:00:00
abstract::An approach for cancer treatment is modulation of tumor microenvironment. Based on the role of extracellular matrix in cell modulation, fabrication of textured materials mimicking extracellular matrix could provide novel opportunities such as determining cancer cell behaviour. With this background, in this work, we ha...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2020.1823992
更新日期:2020-12-01 00:00:00
abstract::New microspheres containing hydrophilic core and hydrophobic coating as a controlled-release system with no toxic reagents were proposed. Water in oil in water (W/O/W) emulsion and solvent evaporation methods were used to make chitosan/ cellulose acetate (CCA) microspheres sized 200 - 400 microm. Ranitidine hydrochlor...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1081/pdt-54421
更新日期:2005-01-01 00:00:00
abstract::Oily liquid drugs are not convenient for oral administration. We developed a powder containing clofibrate (CF), a model of an oily drug, using aminoalkyl methacrylate copolymer (EPO) or methacrylic acid copolymer (L100). CF or a mixture of CF and soybean oil was emulsified with EPO or L100 aqueous solution. Using a hi...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450.2015.1086370
更新日期:2016-12-01 00:00:00
abstract::The purpose of this study was to investigate the effect of the composition of a binary powder mixture on the bonding index, the brittle fracture index, and the strain index, as defined by Hiestand. The studies involved tensile strength and dynamic indentation hardness determinations of square compacts, the solid fract...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837459709022630
更新日期:1997-11-01 00:00:00
abstract::This study investigates the physicochemical properties of glycyl-histidyl-lysine-copper (GHK-Cu) to support the development of a formulation for effective topical delivery. The solubility and distribution coefficients (log D) were investigated using conventional methods and GHK concentrations were quantified with a va...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450.2014.979944
更新日期:2016-03-01 00:00:00
abstract::The purpose of this study was a comparative evaluation of miniaturized vs. University of Minnesota's (i.e., U of Minn. = Hiestand's) procedures for determining the tensile strength, indentation hardness, and bonding index (BI), one out of three Indices of Tableting Performance (ITP). Tableting properties of six direct...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1081/pdt-120022153
更新日期:2003-08-01 00:00:00
abstract::The aim of this study was to prepare a highly porous multiparticulate dosage form containing cilostazol for gastroretentive drug delivery. The floating pellets were prepared with glyceryl behenate as a matrix former and camphor as a sublimating agent by extrusion/spheronization and sublimation under vacuum. Granules p...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2016.1245743
更新日期:2018-06-01 00:00:00
abstract::The physical-chemical processing variables affecting particle size following precipitation using the supercritical antisolvent (SAS) method were investigated by varying both the composition of the feed solvent and the structure of the solute, using a series of steroids. The key factor influencing particle size in thes...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450600561299
更新日期:2006-01-01 00:00:00
abstract::The aim of the present investigation was to develop and study topical gel delivery of curcumin for its anti-inflammatory effects. Carbopol 934P (CRB) and hydroxypropylcellulose (HPC) were used for the preparation of gels. The penetration enhancing effect of menthol (0-12.5% w/w) on the percutaneous flux of curcumin th...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450802409438
更新日期:2009-01-01 00:00:00
abstract:PURPOSE:Aerodynamically stable, nebulized aerosols are desirable to achieve optimum asthma therapy. Stabilizing droplet size using gel-forming polymers may assist in achieving this goal. Semisolid particles may be generated through aerosolization of a polymer solution. Gelatin was employed as a model polymer in a proce...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1081/pdt-120003483
更新日期:2002-05-01 00:00:00
abstract::The present study details the development of a small-scale spray-drying approach for the routine screening of amorphous solid dispersions (ASDs). This strategy aims to overcome the limitations of standard screening methodologies like solvent casting and quench cooling to predict drug-polymer miscibility of spray-dried...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2018.1534861
更新日期:2019-06-01 00:00:00
abstract::Orally dissolving tablets (ODTs) represent one of the recent advances in drug delivery. The foremost objective of this study was to optimize the utilization of lubricant sodium stearyl fumarate in the preparation of dextromethorphan hydrobromide ODTs with enhanced taste-masking properties. The simple blending of sodiu...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2019.1579228
更新日期:2019-07-01 00:00:00
abstract::In the present study, Simvastatin was incorporated in emulsion of soybean oil and propylene glycol monocaprylate as oily phase and Tween 80 and Cremophor EL as surfactants and also their mixtures. Dry adsorbed emulsions were prepared by using colloidal silicon dioxide in varying proportions to adsorb the liquid emulsi...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450701557246
更新日期:2007-01-01 00:00:00
abstract::Alpha lipoic acid (ALA), an active substance in anti-aging products and dietary supplements, need to be masked with an edible polymer to obscure its unpleasant taste. However, the high viscosity of the ALA molecules prevents them from forming microcomposites with masking materials even in supercritical carbon dioxide ...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450.2015.1049707
更新日期:2016-09-01 00:00:00
abstract::Vardenafil hydrochloride (VAR) is an erectile dysfunction treating drug. VAR has a short elimination half-life (4-5 h) and suffers low oral bioavailability (15%). This work aimed to explore the dual potential of VAR-dendrimer complexes as drug release modulators and oral bioavailability enhancers. VAR-dendrimer comple...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2018.1472611
更新日期:2019-03-01 00:00:00
abstract::Microporous polymeric matrices prepared from poly(ɛ-caprolactone) [PCL] were evaluated for controlled vaginal delivery of the antiprotozoal agent (tinidazole) in the treatment of the sexually transmitted infection, trichomoniasis. The matrices were produced by rapidly cooling co-solutions of PCL and tinidazole in acet...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2018.1481430
更新日期:2019-03-01 00:00:00
abstract::In this study, we developed a one-step method to prepare ibuprofen fast- and sustained-release complex preparation. It was based on a double jets electrospinning process. Ibuprofen, a poorly water-soluble drug, was electrospun into fibers with polyvinyl pyrrolidone and hydroxypropyl methyl cellulose by two jets, respe...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2020.1728773
更新日期:2020-07-01 00:00:00
abstract::A redox-responsive docetaxel (DTX) prodrug consisting of a disulfide linkage between DTX and vitamin E (DTX-SS-VE) was synthesized in our laboratory and was successfully formulated into liposomes. The aim of this study was to optimize the formulation and investigate the cellular uptake of DTX prodrug-loaded liposomes ...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2017.1287728
更新日期:2018-01-01 00:00:00
abstract::This paper assesses the cause of particulate formation in vials of the experimental antitumor agent bisnafide and investigates pharmaceutical techniques to reduce the number of particulates in the product. Solution preparation and particulate isolation were performed under Class 100 laminar air flow. Reversed-phase HP...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1081/pdt-100101380
更新日期:1999-08-01 00:00:00
abstract::This study explored the application of chitosan-alginate (CA) and chitosan-pectin (CP) complex films as drug release regulator for the preparation of multiunit controlled-release diclofenac sodium capsules. Pellets containing drug and microcrystalline cellulose, in a ratio of 3:5, were prepared in a fluidized rotary g...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1081/pdt-100002247
更新日期:2001-08-01 00:00:00
abstract::Films of gellan gum:pectin blends were prepared by solvent casting method. Gellan gum:pectin mass ratios were varied (4:1; 1:1; 1:4) at different concentrations (3% or 4%) and glycerol was used as plasticizer (1 or 2%). The films were thin (18-30 µm), translucent, flexible, and homogeneous. The surface pH was suitable...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2019.1682608
更新日期:2020-02-01 00:00:00
abstract:CONTEXT:Development and evaluation of thermosensitive and bioadhesive liquid suppositories containing ketoprofen (KP). OBJECTIVE:This study was conducted to develope thermosensitive and bioadhesive liquid suppositories containing KP using poloxamer and different bioadhesive polymers and to investigate their gelation t...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.3109/10837450.2013.846373
更新日期:2014-12-01 00:00:00
abstract::Colorectal cancer (CRC) is the third most common cause of cancer-related death in both men and women. Often, surgical intervention remains the choice in treating CRC. Traditional dosage forms used for treating CRC deliver drug to wanted as well as unwanted sites of drug action resulting in several adverse side effects...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章,评审
doi:10.3109/10837450.2012.696268
更新日期:2012-09-01 00:00:00
abstract::The key for better antitumor efficacy is to improve the specificity of antitumor drugs for tumor cells and diminish their cytotoxicity to normal tissues. Targeted nanoparticles as antitumor drug delivery system can resolve this problem. In this study, we prepared folate and TAT (arginine-rich cell-penetrating peptide)...
journal_title:Pharmaceutical development and technology
pub_type: 杂志文章
doi:10.1080/10837450.2018.1469147
更新日期:2019-02-01 00:00:00