Chitosan/cellulose acetate microspheres preparation and ranitidine release in vitro.

Abstract:

:New microspheres containing hydrophilic core and hydrophobic coating as a controlled-release system with no toxic reagents were proposed. Water in oil in water (W/O/W) emulsion and solvent evaporation methods were used to make chitosan/ cellulose acetate (CCA) microspheres sized 200 - 400 microm. Ranitidine hydrochloride, as a model drug, was investigated for its release properties in vitro. The loading efficiency and release rate of ranitidine were affected by chitosan concentration and molecular weight. Higher loadings were obtained at lower concentrations in the interval of 1% to 2%. With chitosan at a 2% concentration microspheres could be obtained with more spherical appearance, smaller size, and higher ranitidine loading efficiency microspheres than at other concentrations. Among the different molecular weight chitosan (47, 145, 308, 499, and 1130 KD) microspheres, the high molecular weight chitosan (1130 KD) microspheres had relatively high loading efficiency (10%). Molecular weight and concentration of chitosan as well as the size of microspheres affected the release of ranitidine. Microspheres smaller than 280 microm released the drug faster than did the bigger by about 10%. The optimal condition for the preparation of the microspheres was chitosan concentration 2%, molecular weight 1130 KD. The ranitidine release from the microspheres was 30% during 48 h in phosphate-buffer saline medium.

journal_name

Pharm Dev Technol

authors

Zhou HY,Chen XG,Liu CS,Meng XH,Yu LJ,Liu XY,Liu N

doi

10.1081/pdt-54421

subject

Has Abstract

pub_date

2005-01-01 00:00:00

pages

219-25

issue

2

eissn

1083-7450

issn

1097-9867

journal_volume

10

pub_type

杂志文章
  • In vitro characterization of nebulizer delivery of liposomal amphotericin B aerosols.

    abstract::Pharmaceutical aerosols have the potential to prevent pulmonary infectious diseases. Liposomal amphotericin B (LAMB, Ambisome, Astellas Pharma US, Deerfield, IL, USA) is approved as an intravenous infusion for empiric treatment of presumed fungal infections in neutropenic, febrile patients, as well as patients infecte...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2011.591803

    authors: Alexander BD,Winkler TP,Shi S,Dodds Ashley ES,Hickey AJ

    更新日期:2011-11-01 00:00:00

  • Properties of bioadhesive ketoprofen liquid suppositories: preparation, determination of gelation temperature, viscosity studies and evaluation of mechanical properties using texture analyzer by 4 × 4 factorial design.

    abstract:CONTEXT:Development and evaluation of thermosensitive and bioadhesive liquid suppositories containing ketoprofen (KP). OBJECTIVE:This study was conducted to develope thermosensitive and bioadhesive liquid suppositories containing KP using poloxamer and different bioadhesive polymers and to investigate their gelation t...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2013.846373

    authors: Ozgüney I,Kardhiqi A

    更新日期:2014-12-01 00:00:00

  • Dynamic rheology as a quantitative method for real-time tracking of excipient solvation in non-aqueous hydroxypropylcellulose topical gels.

    abstract::This article describes a method to quantitatively track the solvation of HPC in a non-aqueous solvent system during topical gel manufacture. Where visual observation and microscopy could not establish a trend, straight-forward rheological profiling demonstrated a correlation between increased solvation of hydroxypropy...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2018.1502319

    authors: Potuck A,Leming R,Lam S

    更新日期:2019-04-01 00:00:00

  • Polyamidoamine (PAMAM) dendrimers as potential release modulators and oral bioavailability enhancers of vardenafil hydrochloride.

    abstract::Vardenafil hydrochloride (VAR) is an erectile dysfunction treating drug. VAR has a short elimination half-life (4-5 h) and suffers low oral bioavailability (15%). This work aimed to explore the dual potential of VAR-dendrimer complexes as drug release modulators and oral bioavailability enhancers. VAR-dendrimer comple...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2018.1472611

    authors: Tawfik MA,Tadros MI,Mohamed MI

    更新日期:2019-03-01 00:00:00

  • Effect of processing and formulation variables on the stability of a salt of a weakly basic drug candidate.

    abstract::The effect of some processing and formulation variables on the stability of tablets containing a crystalline salt of a triazine derivative was studied. The salt has a relatively low melting point and a low microenvironmental pH due to the weakly basic nature of the parent compound (pKa = 4.0). This compound decomposes...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-200031417

    authors: Badawy S,Vickery R,Shah K,Hussain M

    更新日期:2004-08-01 00:00:00

  • Novel metrics to compare dissolution profiles.

    abstract:PURPOSE:To evaluate four novel metrics that compare dissolution profiles and assess their performance characteristics by comparing dissolution profiles of FAST and SLOW immediate release metoprolol tartrate tablets. METHODS:The four novel metrics (rho, rho m, delta a, and delta s), along with f2, were applied to disso...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-120003493

    authors: Seo PR,Shah VP,Polli JE

    更新日期:2002-05-01 00:00:00

  • Application of Design Expert for the investigation of capsaicin-loaded microemulsions for transdermal delivery.

    abstract::Our previous study reported that the Design Expert® Software showed a beneficial role in the development of microemulsions (ME) for transdermal drug delivery. To fully confirm the reproducibility and the reliability of simultaneous optimal ME formulations, the optimal ME formulations predicted by the Design Expert® So...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2015.1048552

    authors: Duangjit S,Chairat W,Opanasopit P,Rojanarata T,Ngawhirunpat T

    更新日期:2016-09-01 00:00:00

  • Effect of antioxidants on captopril floating matrices.

    abstract::Stability of captopril in a controlled release formulation has been a challenge for some time. The sustained release of captopril from floating matrices has been studied varying the antioxidant load, the sodium bicarbonate proportion and the compaction pressure. Although in many cases the effect of compaction pressure...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450903110737

    authors: Jiménez-Martínez I,Domínguez-Ramírez AM,Villafuerte-Robles L

    更新日期:2009-07-22 00:00:00

  • Production of microparticles by high-pressure homogenization.

    abstract::A high-pressure homogenization method for the production of aqueous suspensions of poly(D,L-lactide) and poly(D,L-lactide-co-glycolide) was investigated. Depending on the production conditions it was possible to produce micro--as well as nanoparticulate systems without the use of organic solvents. The influence of dif...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837459809009857

    authors: Calvör A,Müller BW

    更新日期:1998-08-01 00:00:00

  • Novel sustained-release fast-disintegrating multi-unit compressed tablets of lornoxicam containing Eudragit RS coated chitosan-alginate beads.

    abstract::Novel fast-disintegrating multi-unit tablets (FDMUTs) were prepared to modify the release of lornoxicam (a potent non-steroidal anti-inflammatory drug with a short half-life) as well as to combine the advantages of multi-unit systems with the cost-effectiveness of compressed tablets. The proposed FDMUTs consisted of s...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837451003692595

    authors: Aburahma MH,Hamza Yel-S

    更新日期:2011-08-01 00:00:00

  • Identification and characterization of potential impurities of quetiapine fumarate.

    abstract::Seven potential impurities, including by-products, starting materials and intermediates were identified in pharmaceutical substance quetiapine fumarate and characterized by spectroscopic methods (MS, IR, NMR). Based on these methods the structures of the impurities were assigned or confirmed as: impurity I: 2-(phenylt...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450802409388

    authors: Stolarczyk EU,Kaczmarek L,Eksanow K,Kubiszewski M,Glice M,Kutner A

    更新日期:2009-01-01 00:00:00

  • Development and in vivo evaluation of baicalin-loaded W/O nanoemulsion for lymphatic absorption.

    abstract::Background: Lymphatic formations that effectively eradicate the virus in the lymphatic system will be therapeutically advantagous in hepatitis B virus (HBV) infection. Lipid-based formulation is often used to deliver drug via the lymphatic system. Baicalin nanoemulsion may be a promising drug delivery system for impro...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2019.1646757

    authors: Xu Q,Zhou A,Wu H,Bi Y

    更新日期:2019-11-01 00:00:00

  • Alfuzosin hydrochloride-loaded low-density gastroretentive sponges: development, in vitro characterization and gastroretentive monitoring in healthy volunteers via MRI.

    abstract::The current work aimed to develop low-density gastroretentive sponges loaded with alfuzosin HCl (ALF) to sustain the rate of drug release, improve its oral bioavailability and deliver it to the main site of absorption. Sponges were developed, according to a 23 full factorial design, by compression of the lyophilized A...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2020.1720235

    authors: Abd El-Aziz MF,Ismail S,Tadros MI,Elnabarawi MA

    更新日期:2020-06-01 00:00:00

  • A measurement of the unstirred aqueous boundary layer in a Franz diffusion cell.

    abstract::The unstirred aqueous boundary layer (ABL) thickness was determined for modified Franz diffusion cells using three test compounds--parathion, 4-hexylresorcinol, and 2,4-dinitrochlorobenzene (DNCB). Steady-state fluxes through one, two, and three dialysis membranes in series were achieved in donor-saturated, infinite-d...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2011.572895

    authors: Miller MA,Kasting G

    更新日期:2012-11-01 00:00:00

  • Development of sponge-like dressings for mucosal/transmucosal drug delivery into vaginal cavity.

    abstract::The aim of the present work was the development of vaginal sponge-like dressings based on chitosan ascorbate (CS) and on hyaluronic acid sodium salt/lysine acetate (HAS) combination. Sponge-like dressings were prepared by freeze-drying and characterized for mechanical resistance and mucoadhesion. CS dressings show hig...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2010.531736

    authors: Rossi S,Marciello M,Ferrari F,Puccio A,Bonferoni C,Sandri G,Caramella C

    更新日期:2012-03-01 00:00:00

  • Effect of degree of methoxylation and particle size on compression properties and compactibility of pectin powders.

    abstract::This study examines the effect of the degree of methoxylation (DM) and particle size on compression properties and compactibility of pectin powders. A powder classification system based on sequential handling of compression parameters was applied. A single size fraction (90-125 μm) of pectin powders with DM values ran...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2010.535831

    authors: Salbu L,Bauer-Brandl A,Alderborn G,Tho I

    更新日期:2012-05-01 00:00:00

  • The absorption of (99m)Tc-alendronate given by rectal route in rabbits.

    abstract::Alendronate sodium (ALD) is a bisphosphonate medication used in the treatment and prevention of osteoporosis. Absorption of ALD as oral formulation is very poor (0.5%-1%). Its bioavailability can decrease with food effect. It has some gastrointestinal adverse effects such as gastritis, gastric ulcer, and esophagitis. ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450801949509

    authors: Asikoğlu M,Ozguney I,Ozcan I,Orumlu O,Guneri T,Koseoğlu K,Ozkilic H

    更新日期:2008-01-01 00:00:00

  • Influence of dissolution media pH and USP1 basket speed on erosion and disintegration characteristics of immediate release metformin hydrochloride tablets.

    abstract:PURPOSE:To investigate the influence of the pH of the dissolution medium on immediate release 850 mg metformin hydrochloride tablets. METHODS:A traditional wet granulation method was used to manufacture metformin hydrochloride tablets with or without a disintegrant. Tablet dissolution was conducted using the USP appar...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2014.892132

    authors: Desai D,Wong B,Huang Y,Tang D,Hemenway J,Paruchuri S,Guo H,Hsieh D,Timmins P

    更新日期:2015-01-01 00:00:00

  • Novel microemulsion-based gel formulation of tazarotene for therapy of acne.

    abstract::The objective of this study was to develop and evaluate a novel microemulsion based gel formulation containing tazarotene for targeted topical therapy of acne. Psudoternary phase diagrams were constructed to obtain the concentration range of oil, surfactant, and co-surfactant for microemulsion formation. The optimized...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2015.1081610

    authors: Patel MR,Patel RB,Parikh JR,Patel BG

    更新日期:2016-12-01 00:00:00

  • Physiological parameters of the gastrointestinal fluid impact the dissolution behavior of the BCS class IIa drug valsartan.

    abstract::The objective of this study was to investigate the effect of the physiological parameters (pH, buffer capacity, and ionic strength) of the gastrointestinal (GI) fluid on the dissolution behavior of the class II weakly acidic (BCS class IIa) drug valsartan. A series of in vitro dissolution studies was carried out on Di...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2018.1536996

    authors: Hamed R

    更新日期:2018-12-01 00:00:00

  • Doxorubicin hydrochloride loaded nanotextured films as a novel drug delivery platform for ovarian cancer treatment.

    abstract::An approach for cancer treatment is modulation of tumor microenvironment. Based on the role of extracellular matrix in cell modulation, fabrication of textured materials mimicking extracellular matrix could provide novel opportunities such as determining cancer cell behaviour. With this background, in this work, we ha...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2020.1823992

    authors: Yaşayan G,Mega Tiber P,Orun O,Alarçin E

    更新日期:2020-12-01 00:00:00

  • Interaction of [D-Trp6, Des-Gly10] LHRH ethylamide and hydroxy propyl beta-cyclodextrin (HPbetaCD): thermodynamics of interaction and protection from degradation by alpha-chymotrypsin.

    abstract:PURPOSE:The purpose of this study is to investigate the mechanisms and thermodynamics of the interaction between hydroxypropyl beta-cyclodextrin (HPdetaCD) and [D-Trp6, des-Gly10] LHRH ethylamide (deslorelin), a peptide drug. METHODS:We used UV and fluorescence spectroscopy to study the interaction of HPbetaCD and des...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-120000297

    authors: Koushik KN,Bandi N,Kompella UB

    更新日期:2001-11-01 00:00:00

  • Taste masking of naproxen sodium granules by fluid-bed coating.

    abstract::The taste of oral dosage forms is an important argument regarding patient's compliance and acceptability. For this reason, it is often necessary to mask an undesirable and unpleasant taste of an active pharmaceutical ingredient. The purpose of this study was to mask the taste of naproxen sodium by a new fluid-bed coat...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2012.757784

    authors: Stange U,Führling C,Gieseler H

    更新日期:2014-03-01 00:00:00

  • Comparative studies on glycerol monooleate- and phytantriol-based cubosomes containing oridonin in vitro and in vivo.

    abstract::To improve the solubility and bioavailability of oridonin (ORI), glycerol monooleate lipid (GMO)- or phytantriol (PYT)-Poloxamer 407-propylene glycol-water systems were firstly used to develop cubosomes containing ORI for oral delivery. These cubosomes prepared through the fragmentation of bulk gels under homogenizati...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2015.1121496

    authors: Shi X,Peng T,Huang Y,Mei L,Gu Y,Huang J,Han K,Li G,Hu C,Pan X,Wu C

    更新日期:2017-05-01 00:00:00

  • Development of a small-scale spray-drying approach for amorphous solid dispersions (ASDs) screening in early drug development.

    abstract::The present study details the development of a small-scale spray-drying approach for the routine screening of amorphous solid dispersions (ASDs). This strategy aims to overcome the limitations of standard screening methodologies like solvent casting and quench cooling to predict drug-polymer miscibility of spray-dried...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2018.1534861

    authors: Ousset A,Bassand C,Chavez PF,Meeus J,Robin F,Schubert MA,Somville P,Dodou K

    更新日期:2019-06-01 00:00:00

  • The impact of crystallinity on Brequinar sodium hygroscopicity.

    abstract::The hygroscopicity of Brequinar sodium, an organ transplant immunosuppressant, at 75% relative humidity highly depends on the crystal form or crystallinity of the drug substance. Hygroscopicity and ease of water uptake of three lots of Brequinar sodium were investigated. Those lots contained different impurities at le...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837459609031417

    authors: Wu LS,Pang J,Hussain MA

    更新日期:1996-04-01 00:00:00

  • The preparation of rapidly disintegrating tablets in the mouth.

    abstract::Elderly people, children and patients sometimes have difficulties swallowing tablets. To solve this problem, a novel method of preparing tablets that disintegrate rapidly in the mouth was developed. A tablet with high porosity is required for rapid disintegration, but such a tablet is generally fragile. To make a tabl...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-120000287

    authors: Sugimoto M,Matsubara K,Koida Y,Kobayashi M

    更新日期:2001-11-01 00:00:00

  • Orally disintegrating tablets and orally disintegrating mini tablets - novel dosage forms for pediatric use.

    abstract::The oral administration route is considered to be the most widely used route because of its convenience of administration and manufacturing. Dosage forms, like orally disintegrating tablets (ODTs), mini tablets, and orally disintegrating mini tablets (ODMTs), are recognized as promising for use in pediatric patients. ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章,评审

    doi:10.1080/10837450.2019.1615090

    authors: Comoglu T,Dilek Ozyilmaz E

    更新日期:2019-09-01 00:00:00

  • Development of controlled-release SK&F 82526-J buffer bead formulations with tartaric acid as the buffer.

    abstract::The purpose of this research was to design and develop a novel controlled-release bead formulation for oral administration with buffer crystals as a carrier for loading of fenoldopam mesylate, an intravenous antihypertensive agent, which provides an in vitro release rate of 30-50 mg/hr for 6-8 hr. Buffer crystals were...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837459809028629

    authors: Venkatesh GM

    更新日期:1998-11-01 00:00:00

  • A proposal for a drug product Manufacturing Classification System (MCS) for oral solid dosage forms.

    abstract::This paper proposes the development of a drug product Manufacturing Classification System (MCS) based on processing route. It summarizes conclusions from a dedicated APS conference and subsequent discussion within APS focus groups and the MCS working party. The MCS is intended as a tool for pharmaceutical scientists t...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章,评审

    doi:10.3109/10837450.2014.954728

    authors: Leane M,Pitt K,Reynolds G,Manufacturing Classification System (MCS) Working Group.

    更新日期:2015-01-01 00:00:00