Comparative studies on glycerol monooleate- and phytantriol-based cubosomes containing oridonin in vitro and in vivo.

Abstract:

:To improve the solubility and bioavailability of oridonin (ORI), glycerol monooleate lipid (GMO)- or phytantriol (PYT)-Poloxamer 407-propylene glycol-water systems were firstly used to develop cubosomes containing ORI for oral delivery. These cubosomes prepared through the fragmentation of bulk gels under homogenization conditions of 1200 bar and nine cycles had a mean particle size of around 200 nm with narrow size distribution, and ORI encapsulation efficiency over 85%. Powder X-ray diffraction and differential scanning calorimetry indicated that ORI was in an amorphous or molecular form in the cubosomes. The internal structures of GMO- and PYT-based cubosomes were revealed by small-angle X-ray scattering as a bi-continuous cubic liquid crystalline phase with Im3m and Pn3m geometry, respectively. About 80% of ORI was released in vitro from GMO- and PYT-based cubosomes at 24 h, showing a sustained release kinetics fitted with Higuchi's equation. The pharmacokinetic study in rats showed that the PYT-based cubosomes significantly enhanced the adsorption of ORI as compared to the GMO-based cubosomes and ORI suspension, with evidence of longer half-life and greater relative bioavailability (p < 0.01). Therefore, the PYT-based cubosomes containing ORI might be proposed as a promising candidate carrier for the efficient delivery of drug with therapeutic treatment.

journal_name

Pharm Dev Technol

authors

Shi X,Peng T,Huang Y,Mei L,Gu Y,Huang J,Han K,Li G,Hu C,Pan X,Wu C

doi

10.3109/10837450.2015.1121496

subject

Has Abstract

pub_date

2017-05-01 00:00:00

pages

322-329

issue

3

eissn

1083-7450

issn

1097-9867

journal_volume

22

pub_type

杂志文章
  • In vitro characterization of nebulizer delivery of liposomal amphotericin B aerosols.

    abstract::Pharmaceutical aerosols have the potential to prevent pulmonary infectious diseases. Liposomal amphotericin B (LAMB, Ambisome, Astellas Pharma US, Deerfield, IL, USA) is approved as an intravenous infusion for empiric treatment of presumed fungal infections in neutropenic, febrile patients, as well as patients infecte...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2011.591803

    authors: Alexander BD,Winkler TP,Shi S,Dodds Ashley ES,Hickey AJ

    更新日期:2011-11-01 00:00:00

  • Spray coating of foley urinary catheter by chlorhexidine-loadedpoly(ε-caprolactone) nanospheres: effect of lyoprotectants, characteristics, and antibacterial activity evaluation.

    abstract::In this study, chlorhexidine-loaded poly(ε-caprolactone) nanospheres (CHX-NS) were prepared and successfully coated on the urinary catheters. Properties of CHX-NS were evaluated including drug loading content and the nanosphere size. Effects of different lyoprotectants for long-term storage of CHX-NS were also investi...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2018.1502317

    authors: Srisang S,Nasongkla N

    更新日期:2019-04-01 00:00:00

  • Effects of light intensity, n-alcohols, water-soluble colorants, and solution viscosity on photoisomerization of sorivudine.

    abstract::Effects of various factors, such as light intensity, polarizability of n-alcohol solvents, addition of colorants, and viscosity of solutions on the kinetics of the photoisomerization of therapeutically effective E-isomer of sorivudine to its less effective Z-isomer were studied. Solutions of known concentrations of E-...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-100000047

    authors: Desai D,Li D,Janjikhel R,Lang B,Jain N

    更新日期:2001-01-01 00:00:00

  • Preparation and characterization of a powder containing an oily liquid drug with Eudragit EPO or L100 copolymer.

    abstract::Oily liquid drugs are not convenient for oral administration. We developed a powder containing clofibrate (CF), a model of an oily drug, using aminoalkyl methacrylate copolymer (EPO) or methacrylic acid copolymer (L100). CF or a mixture of CF and soybean oil was emulsified with EPO or L100 aqueous solution. Using a hi...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2015.1086370

    authors: Fujii M,Kawakami A,Saito A,Tuchiya H,Koizumi N,Watanabe Y

    更新日期:2016-12-01 00:00:00

  • Influence of molecular properties on oral bioavailability of lipophilic drugs - mapping of bulkiness and different measures of polarity.

    abstract::The biopharmaceutical assessment of new drug candidates based on their chemical structure is important in drug discovery and development. The scope of this study is to focus on lipophilic drugs and to clarify the role of their chemical predictors on oral bioavailability in humans. First their chemical properties were ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450802626296

    authors: Kuentz MT,Arnold Y

    更新日期:2009-01-01 00:00:00

  • Isotropic systems of medium-chain mono- and diglycerides for solubilization of lipophilic and hydrophilic drugs.

    abstract::The aim of this study was to investigate isotropic mono- and diglyceride-based (MCMDG) systems, which are potential vehicles for injectable products containing both hydrophilic and lipophilic drugs. For two-component systems, MCMDG was mixed with various masses of water. For three-component systems, the samples were p...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-120027422

    authors: Sari P,Razzak M,Tucker IG

    更新日期:2004-01-01 00:00:00

  • Drug solubility effects on predicting optimum conditions for extrusion and spheronization of pellets.

    abstract::This paper explores the utility of aqueous solubility of structurally similar drugs in predicting optimum conditions for extrusion and spheronization of pellets using response surface methodology. Pharmacologically active xanthine derivatives exhibiting widely varying aqueous solubility were used to determine optimum ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837459709022608

    authors: Hileman GA,Upadrashta SM,Neau SH

    更新日期:1997-02-01 00:00:00

  • Stability of Octastatin, a somatostatin analog cyclic octapeptide, in aqueous solution.

    abstract::In this study, the degradation of Octastatin, a cyclic octapeptide analog of somatostatin, was examined as a function of pH, temperature, buffer, and ionic strength by reversed-phase gradient high-performance liquid chromatography. Degradation of Octastatin followed a first-order kinetics. Various buffer species such ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837459709022640

    authors: Jang SW,Woo BH,Lee JT,Moon SC,Lee KC,DeLuca PP

    更新日期:1997-11-01 00:00:00

  • One-step preparation of ibuprofen fast- and sustained-release formulation by electrospinning with improved efficacy and reduced side effect.

    abstract::In this study, we developed a one-step method to prepare ibuprofen fast- and sustained-release complex preparation. It was based on a double jets electrospinning process. Ibuprofen, a poorly water-soluble drug, was electrospun into fibers with polyvinyl pyrrolidone and hydroxypropyl methyl cellulose by two jets, respe...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2020.1728773

    authors: Che X,Xue J,Zhang J,Yang X,Wang L

    更新日期:2020-07-01 00:00:00

  • A measurement of the unstirred aqueous boundary layer in a Franz diffusion cell.

    abstract::The unstirred aqueous boundary layer (ABL) thickness was determined for modified Franz diffusion cells using three test compounds--parathion, 4-hexylresorcinol, and 2,4-dinitrochlorobenzene (DNCB). Steady-state fluxes through one, two, and three dialysis membranes in series were achieved in donor-saturated, infinite-d...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2011.572895

    authors: Miller MA,Kasting G

    更新日期:2012-11-01 00:00:00

  • Isolation technology for research and development applications: from concept to production.

    abstract::A prototype parenteral manufacturing facility based on isolation technology was designed, constructed, and commissioned at Warner-Lambert Co., Morris Plains, NJ, with emphasis on its application to research and development (R&D) settings. The facility contains closed isolators for holding, transferring, and manufactur...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-100102034

    authors: Krishna AK,Lodhi SA,Harris MR

    更新日期:2000-01-01 00:00:00

  • The absorption of (99m)Tc-alendronate given by rectal route in rabbits.

    abstract::Alendronate sodium (ALD) is a bisphosphonate medication used in the treatment and prevention of osteoporosis. Absorption of ALD as oral formulation is very poor (0.5%-1%). Its bioavailability can decrease with food effect. It has some gastrointestinal adverse effects such as gastritis, gastric ulcer, and esophagitis. ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450801949509

    authors: Asikoğlu M,Ozguney I,Ozcan I,Orumlu O,Guneri T,Koseoğlu K,Ozkilic H

    更新日期:2008-01-01 00:00:00

  • Complexation and solubility behavior of albendazole with some cyclodextrins.

    abstract::The main purpose of this work was to study the albendazole-cyclodextrins complexation equilibrium and to propose a suitable excipient to improve the solubility behavior and dissolution rate of albendazole. The complexation of albendazole with four cyclodextrins, alpha-CD, beta-CD, gamma-CD, and hydroxypropylated (HP)-...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837459809009867

    authors: Díaz D,Bernad Bernad MJ,Gracia Mora J,Escobar Llanos CM

    更新日期:1998-08-01 00:00:00

  • Doxorubicin-loaded microgels composed of cinnamic acid-gelatin conjugate and cinnamic acid-Pluronic F127 conjugate.

    abstract::Microgels were prepared by cinnamic acid-gelatin (type B) conjugate (CA-GelB) and cinnamic acid-Pluronic F127 conjugate (CA-Plur). (1)H NMR confirmed that CA was conjugated to gelatin and the gelatin to CA residue molar ratio was estimated to be 1:4.7 by a colorimetric method. CA-Plur of which the CA residue to Plur m...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2014.999787

    authors: Zhang H,Kim JC

    更新日期:2016-01-01 00:00:00

  • Physicochemical characterization of native glycyl-l-histidyl-l-lysine tripeptide for wound healing and anti-aging: a preformulation study for dermal delivery.

    abstract::This study investigates the physicochemical properties of glycyl-histidyl-lysine-copper (GHK-Cu) to support the development of a formulation for effective topical delivery. The solubility and distribution coefficients (log D) were investigated using conventional methods and GHK concentrations were quantified with a va...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2014.979944

    authors: Badenhorst T,Svirskis D,Wu Z

    更新日期:2016-03-01 00:00:00

  • Construction and cellular uptake behavior of redox-sensitive docetaxel prodrug-loaded liposomes.

    abstract::A redox-responsive docetaxel (DTX) prodrug consisting of a disulfide linkage between DTX and vitamin E (DTX-SS-VE) was synthesized in our laboratory and was successfully formulated into liposomes. The aim of this study was to optimize the formulation and investigate the cellular uptake of DTX prodrug-loaded liposomes ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2017.1287728

    authors: Ren G,Jiang M,Guo W,Sun B,Lian H,Wang Y,He Z

    更新日期:2018-01-01 00:00:00

  • Development of sponge-like dressings for mucosal/transmucosal drug delivery into vaginal cavity.

    abstract::The aim of the present work was the development of vaginal sponge-like dressings based on chitosan ascorbate (CS) and on hyaluronic acid sodium salt/lysine acetate (HAS) combination. Sponge-like dressings were prepared by freeze-drying and characterized for mechanical resistance and mucoadhesion. CS dressings show hig...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2010.531736

    authors: Rossi S,Marciello M,Ferrari F,Puccio A,Bonferoni C,Sandri G,Caramella C

    更新日期:2012-03-01 00:00:00

  • Understanding drug-excipient compatibility: oxidation of compound A in a solid dosage form.

    abstract::Drug-excipient compatibility studies lay the foundation for designing a chemically stable formulation for clinical and commercial development. This article describes the investigation of oxidative degradation encountered with compound A (a phenylalanine-drug complex) in a capsule dosage form. Two wet- granulation caps...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450903182140

    authors: Wu Y,Dali M,Gupta A,Raghavan K

    更新日期:2009-01-01 00:00:00

  • Synthesis, characterization, and kinetic release study of methotrexate loaded mPEG-PCL polymersomes for inhibition of MCF-7 breast cancer cell line.

    abstract::In this study, we designed a polymersome system for the controlled release of methotrexate (MTX) as an anticancer drug with the objective of improving the loading efficiency of the drug in polymersomes as well as achievement of an efficient control on the release rate of drug from nanocarriers. We synthesized mono met...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2018.1425433

    authors: Nosrati H,Adinehvand R,Manjili HK,Rostamizadeh K,Danafar H

    更新日期:2019-01-01 00:00:00

  • Doxorubicin hydrochloride loaded nanotextured films as a novel drug delivery platform for ovarian cancer treatment.

    abstract::An approach for cancer treatment is modulation of tumor microenvironment. Based on the role of extracellular matrix in cell modulation, fabrication of textured materials mimicking extracellular matrix could provide novel opportunities such as determining cancer cell behaviour. With this background, in this work, we ha...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2020.1823992

    authors: Yaşayan G,Mega Tiber P,Orun O,Alarçin E

    更新日期:2020-12-01 00:00:00

  • Release kinetics of a controlled-release multiparticulate dosage form prepared using a hot-melt fluid bed coating method.

    abstract::Dissolution profiles of various multiparticulate controlled-release dosage forms prepared by applying lipophilic materials using a hot-melt coating technique were analyzed to determine release kinetics. The dosage forms were prepared using a novel solid dispersion hot-melt fluid bed coating method. Various lipophilic ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837459908984231

    authors: Griffin EN,Niebergall PJ

    更新日期:1999-01-01 00:00:00

  • Generation of gelatin aerosol particles from nebulized solutions as model drug carrier systems.

    abstract:PURPOSE:Aerodynamically stable, nebulized aerosols are desirable to achieve optimum asthma therapy. Stabilizing droplet size using gel-forming polymers may assist in achieving this goal. Semisolid particles may be generated through aerosolization of a polymer solution. Gelatin was employed as a model polymer in a proce...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-120003483

    authors: Deaton AT,Jones LD,Dunbar CA,Hickey AJ,Williams DM

    更新日期:2002-05-01 00:00:00

  • Drug-polymer mixed coating: a new approach for controlling drug release rates in pellets.

    abstract::A new approach to developing a drug-polymer mixed coat for highly water-soluble diltiazem pellets was investigated at different coating levels. Drug layering and the coating procedures were performed using a bottom spray fluidized bed coater. Drug pellets were coated with Eudragit NE40 (NE40) alone and in combination ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450500464008

    authors: Nisar ur Rahman,Yuen KH,Khan NA,Wong JW

    更新日期:2006-02-01 00:00:00

  • Gastroretentive bilayer film for sustained release of atorvastatin calcium and immediate release of amlodipine besylate: pharmaceutical, pharmacokinetic evaluation, and IVIVC.

    abstract::The present study was aimed to optimize capsulated unfolding type gastroretentive bilayer film constituting immediate release (IR) layer of amlodipine besylate and sustained release (SR) layer of atorvastatin calcium. A three-factor, three-level Box-Behnken-design was used to optimize bilayer film with dual-release ch...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1080/10837450.2019.1705486

    authors: Porwal A,Dwivedi H,Pathak K

    更新日期:2020-04-01 00:00:00

  • Amorphization of itraconazole by inorganic pharmaceutical excipients: comparison of excipients and processing methods.

    abstract::The aim of this study was to investigate the effects of solid carriers and processing routes on the properties of amorphous solid dispersions of itraconazole. Three solid carriers with a range of surface properties were studied, (1) a mesoporous silicate, magnesium aluminum silicate (Neusilin US2), (2) a nonporous sil...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2014.959181

    authors: Grobelny P,Kazakevich I,Zhang D,Bogner R

    更新日期:2015-01-01 00:00:00

  • Characterization of a backbone cleavage product of BMS-196854 (Oncostatin M), a recombinant anti-inflammatory cytokine.

    abstract:PURPOSE:BMS-196843 (Oncostatin M) is a therapeutic recombinant protein in development. Scale-up process changes led to unexpected instability of the bulk drug substance solution during storage. A product with an apparent higher MW than the parent protein was observed by the size-exclusion chromatography (SEC). This stu...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-100002202

    authors: Zhao F,Stein DJ,Paborji M,Cash PW,Root BJ,Wei Z,Knupp CJ

    更新日期:2001-01-01 00:00:00

  • Formulation and evaluation of meloxicam niosomes as vesicular carriers for enhanced skin delivery.

    abstract:CONTEXT:Skin delivery of Meloxicam (MX) offers several advantages over the oral route which is associated with potential side effects. OBJECTIVES:The aim of this study was to develop transdermal MX in niosomes. MATERIALS AND METHODS:Vesicles prepared by thin film hydration method were characterized and the acute anti...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2011.598166

    authors: El-Menshawe SF,Hussein AK

    更新日期:2013-07-01 00:00:00

  • Correlation of the thermal stability of phospholipid-based emulsions and the microviscosity measurements using fluorescence polarization.

    abstract::The fluorescence polarization technique was used to measure the microviscosity of a series of phospholipid-based emulsions. Fourteen different oil-in-water emulsions containing 20% medium chain length triglycerides, various concentrations and types of phospholipids, and 2.2% glycerin were prepared by microfluidization...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.1081/pdt-120030251

    authors: Zhang X,Kirsch LE

    更新日期:2004-01-01 00:00:00

  • Formulation factors affecting the isomerization rate of betamethasone-17-valerate in a developmental hydrophilic cream - a HPLC and microscopy based stability study.

    abstract::The formulation of betamethasone-17-valerate (BV) into topical medicines presents a significant challenge for the formulation chemist. The substance is susceptible to acid and base catalyzed isomerization in aqueous environments, which results in valerate transesterification from carbon 17 to carbon 21 of the steroid ...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2016.1143003

    authors: Byrne J,Wyraz A,Velasco-Torrijos T,Reinhardt R

    更新日期:2017-06-01 00:00:00

  • Reduction in burst release after coating poly(D,L-lactide-co-glycolide) (PLGA) microparticles with a drug-free PLGA layer.

    abstract::The high initial burst release of a highly water-soluble drug from poly (D,L-lactide-co-glycolide) (PLGA) microparticles prepared by the multiple emulsion (w/o/w) solvent extraction/evaporation method was reduced by coating with an additional polymeric PLGA layer. Coating with high encapsulation efficiency was perform...

    journal_title:Pharmaceutical development and technology

    pub_type: 杂志文章

    doi:10.3109/10837450.2010.513989

    authors: Ahmed AR,Elkharraz K,Irfan M,Bodmeier R

    更新日期:2012-01-01 00:00:00