Novel metrics to compare dissolution profiles.

abstract：:The aim of this study was to investigate isotropic mono- and diglyceride-based (MCMDG) systems, which are potential vehicles for injectable products containing both hydrophilic and lipophilic drugs. For two-component systems, MCMDG was mixed with various masses of water. For three-component systems, the samples were p...

journal_title：Pharmaceutical development and technology

authors： Sari P,Razzak M,Tucker IG

更新日期：2004-01-01 00:00:00

abstract：CONTEXT:Development and evaluation of thermosensitive and bioadhesive liquid suppositories containing ketoprofen (KP). OBJECTIVE:This study was conducted to develope thermosensitive and bioadhesive liquid suppositories containing KP using poloxamer and different bioadhesive polymers and to investigate their gelation t...

journal_title：Pharmaceutical development and technology

authors： Ozgüney I,Kardhiqi A

更新日期：2014-12-01 00:00:00

abstract：:Effects of various factors, such as light intensity, polarizability of n-alcohol solvents, addition of colorants, and viscosity of solutions on the kinetics of the photoisomerization of therapeutically effective E-isomer of sorivudine to its less effective Z-isomer were studied. Solutions of known concentrations of E-...

journal_title：Pharmaceutical development and technology

authors： Desai D,Li D,Janjikhel R,Lang B,Jain N

更新日期：2001-01-01 00:00:00

abstract：:The objective of the present study was to coprocess 2 active pharmaceutical ingredients (APIs), nevirapine (NVP) and stavudine (STV), by spray drying technique to overcome the respective problems of poor solubility and poor content uniformity. The coprocessed product (NVP-STV CP) and untreated APIs were characterized ...

journal_title：Pharmaceutical development and technology

authors： Mohammed GA,Puri V,Bansal AK

更新日期：2008-01-01 00:00:00

abstract：:The physical stability of amorphous solid dispersions (SDs) is influenced by their storage conditions. The goal of this work was to investigate the factors affecting the recrystallization of drugs in SDs after storage under conditions of high temperature and high humidity. SDs of three drugs (dipyridamole, nifedipine ...

journal_title：Pharmaceutical development and technology

authors： Shibata Y,Fujii M,Suzuki A,Koizumi N,Kanada K,Yamada M,Watanabe Y

更新日期：2014-06-01 00:00:00

abstract：:Bupivacaine lipid microparticles were prepared and evaluated as a parenteral sustained-release dosage form for postoperative pain management. Bupivacaine free base was incorporated into a molten tristearin matrix and lipid micro-particles were subsequently formed from this molten mixture by a spray-congealing process....

journal_title：Pharmaceutical development and technology

authors： Li LC,Zhu L,Song JF,Deng JS,Bandopadhyay R,Wurster DE

更新日期：2005-01-01 00:00:00

abstract：:The purpose of this study was to improve the sensitivity and accuracy of quantitative analysis of polymorphic mixtures. Various techniques such as hand grinding and mixing (in mortar and pestle), air jet milling and ball milling for micronization of particle and mixing were used to prepare binary mixtures. Using these...

journal_title：Pharmaceutical development and technology

authors： Alam S,Patel S,Bansal AK

更新日期：2010-09-01 00:00:00

abstract：:The present study was aimed to optimize capsulated unfolding type gastroretentive bilayer film constituting immediate release (IR) layer of amlodipine besylate and sustained release (SR) layer of atorvastatin calcium. A three-factor, three-level Box-Behnken-design was used to optimize bilayer film with dual-release ch...

journal_title：Pharmaceutical development and technology

authors： Porwal A,Dwivedi H,Pathak K

更新日期：2020-04-01 00:00:00

abstract：:The current work aimed to develop low-density gastroretentive sponges loaded with alfuzosin HCl (ALF) to sustain the rate of drug release, improve its oral bioavailability and deliver it to the main site of absorption. Sponges were developed, according to a 23 full factorial design, by compression of the lyophilized A...

journal_title：Pharmaceutical development and technology

authors： Abd El-Aziz MF,Ismail S,Tadros MI,Elnabarawi MA

更新日期：2020-06-01 00:00:00

abstract：:In the current study, we demonstrate a structured approach to downstream process development for spray dried amorphous solid dispersions. Direct compression is generally not suitable due to typically poor flow of spray dried powders in tablets. Roller compaction (RC) is therefore the method of choice to enable spray d...

journal_title：Pharmaceutical development and technology

authors： Henriques J,Moreira J,Doktorovová S

更新日期：2021-01-04 00:00:00

abstract：:Flecainide base is pharmaceutically active substance used for production of flecainide acetate which is known in market as Tambacor, Almarytm, Apocard, Ecrinal or Flecaine. It is determined that flecainide base forms four polymorphic forms abbreviated as Ib, IIb, IIIb and IVb. Flecainide base form Ib is thermodynamica...

journal_title：Pharmaceutical development and technology

authors： Veldre K,Eglīte Z,Actiņš A,Zvirgzdiņš A,Rozenberga L,Tamanis E

更新日期：2014-02-01 00:00:00

abstract：PURPOSE:The purpose of this study is to investigate the mechanisms and thermodynamics of the interaction between hydroxypropyl beta-cyclodextrin (HPdetaCD) and [D-Trp6, des-Gly10] LHRH ethylamide (deslorelin), a peptide drug. METHODS:We used UV and fluorescence spectroscopy to study the interaction of HPbetaCD and des...

journal_title：Pharmaceutical development and technology

authors： Koushik KN,Bandi N,Kompella UB

更新日期：2001-11-01 00:00:00

abstract：:The purpose of this study was to assess the impact of impurities in formulation components, antioxidants, formulation pH, and processing/packaging on the extent of color change associated with oxidation of danofloxacin injectable. The methods used in this study include reversed-phase HPLC, UV-VIS spectrophotometry, at...

journal_title：Pharmaceutical development and technology

authors： Kasraian K,Kuzniar AA,Wilson GG,Wood JA

更新日期：1999-01-01 00:00:00

abstract：:An approach for cancer treatment is modulation of tumor microenvironment. Based on the role of extracellular matrix in cell modulation, fabrication of textured materials mimicking extracellular matrix could provide novel opportunities such as determining cancer cell behaviour. With this background, in this work, we ha...

journal_title：Pharmaceutical development and technology

authors： Yaşayan G,Mega Tiber P,Orun O,Alarçin E

更新日期：2020-12-01 00:00:00

abstract：:The interaction of 5-nitro-2-furfurilylidene benzhydrazide (5NFB), potential anti-trypanosomal compound, with micellar solutions was studied. The results indicated that 50 mug of 5NFB completely kills 20 million T. cruzi epimastigote cells within 3 days, whereas the same amount of benznidazole kills 30% of the cells a...

journal_title：Pharmaceutical development and technology

authors： Rangel-Yagui CO,Hsu HW,Barbosa LR,Caetano W,Pessoa A Jr,Tavares LC,Itri R

更新日期：2007-01-01 00:00:00

abstract：:Dynamic image analysis (DIA) was used to measure particle diameter (D50) of in-process samples removed during fluid bed coating. A single, rapid measurement gave D50 to within 4 mum. Samples removed at intervals of 2% weight gain were readily distinguishable by DIA and by their drug release profiles. Drug release was ...

journal_title：Pharmaceutical development and technology

authors： Heinicke G,Schwartz JB

更新日期：2006-01-01 00:00:00

abstract：:The effect of six factors: spray gun, formulation, inlet temperature, atomizing air pressure, fan air pressure, and gun-bed distance, on the final adhesion of the film coat to the tablet core were assessed. The method used was based on an experimental design, Resolution IV, that allowed the main effects to be free fro...

journal_title：Pharmaceutical development and technology

authors： Khan H,Fell JT,Macleod GS

更新日期：2005-01-01 00:00:00

abstract：:The aim of the present investigation was to develop and study topical gel delivery of curcumin for its anti-inflammatory effects. Carbopol 934P (CRB) and hydroxypropylcellulose (HPC) were used for the preparation of gels. The penetration enhancing effect of menthol (0-12.5% w/w) on the percutaneous flux of curcumin th...

journal_title：Pharmaceutical development and technology

authors： Patel NA,Patel NJ,Patel RP

更新日期：2009-01-01 00:00:00

abstract：:Microporous polymeric matrices prepared from poly(ɛ-caprolactone) [PCL] were evaluated for controlled vaginal delivery of the antiprotozoal agent (tinidazole) in the treatment of the sexually transmitted infection, trichomoniasis. The matrices were produced by rapidly cooling co-solutions of PCL and tinidazole in acet...

journal_title：Pharmaceutical development and technology

authors： Fernando HV,Chan LL,Dang N,Santhanes D,Banneheke H,Nalliah S,Coombes AGA

更新日期：2019-03-01 00:00:00

abstract：:An osmotic-controlled pulsatile delivery technology was developed for targeted drug delivery. This novel system consists of a tablet core surrounded by an osmotic coating that has been mechanically compromised in strategic locations to facilitate reliable drug release at a given time point after administration. The ta...

journal_title：Pharmaceutical development and technology

authors： Rahemba TR,Bell S,Connolly EK,Waterman KC

更新日期：2009-01-01 00:00:00

abstract：:Photon correlation spectroscopy (PCS) is compared with classic rheological measurements using the cone-and-plate technique for the determination of the viscosity of protein solutions. The potential advantages using PCS are small sample volume and fast determination of zero-shear viscosity. The present study assesses p...

journal_title：Pharmaceutical development and technology

authors： Wagner M,Reiche K,Blume A,Garidel P

更新日期：2013-07-01 00:00:00

abstract：:Dual drug nanocrystals loaded nano embedded microparticles (DNEMs) were prepared for fixed dose combination of simvastatin (SIM) and ezetimibe (EZE) using NanoCrySP technology. The purpose was to generate nanonized SIM and EZE dispersed in matrix of single crystallization inducing excipient and investigate their in vi...

journal_title：Pharmaceutical development and technology

authors： Nandi S,Kaur A,Bansal AK

更新日期：2020-01-01 00:00:00

abstract：:The present study was aimed to develop a matrix-type transdermal formulation of pentazocine using mixed polymeric grades of Eudragit RL/RS. The possible interaction between drug and polymer used were characterized by FTIR, DSC and X-RD. X-RD study indicates a change of state of drug from crystalline to amorphous in th...

journal_title：Pharmaceutical development and technology

authors： Chandak AR,Prasad Verma PR

更新日期：2010-06-01 00:00:00

abstract：:The effect of chemical enhancers (e.g., fatty acids, limonene, depilatory lotions) and iontophoresis was investigated on the in vitro permeability of leuprolide acetate through porcine epidermis. Franz diffusion cells and Scepter iontophoretic power source were used for the percutaneous absorption studies. Anodal iont...

journal_title：Pharmaceutical development and technology

authors： Rastogi SK,Singh J

更新日期：2004-11-01 00:00:00

abstract：:The high initial burst release of a highly water-soluble drug from poly (D,L-lactide-co-glycolide) (PLGA) microparticles prepared by the multiple emulsion (w/o/w) solvent extraction/evaporation method was reduced by coating with an additional polymeric PLGA layer. Coating with high encapsulation efficiency was perform...

journal_title：Pharmaceutical development and technology

authors： Ahmed AR,Elkharraz K,Irfan M,Bodmeier R

更新日期：2012-01-01 00:00:00

abstract：:The instability of protein and antigen(s) during encapsulation in biodegradable polymers by water-in-oil-in-water (w/o/w) encapsulation is well established. The aim of present study is to screen various additives to prevent the inactivation and loss of immunogenicity of HBsAg upon its exposure to the water/CH(2)Cl(2) ...

journal_title：Pharmaceutical development and technology

authors： Tomar P,Giri N,Karwasara VS,Pandey RS,Dixit VK

更新日期：2012-07-01 00:00:00

abstract：:The effect of some processing and formulation variables on the stability of tablets containing a crystalline salt of a triazine derivative was studied. The salt has a relatively low melting point and a low microenvironmental pH due to the weakly basic nature of the parent compound (pKa = 4.0). This compound decomposes...

journal_title：Pharmaceutical development and technology

authors： Badawy S,Vickery R,Shah K,Hussain M

更新日期：2004-08-01 00:00:00

abstract：:The aim of the present study is to prepare risperidone-loaded poly lactic-co-glycolic acid (PLGA) microspheres within microfluidic system and to achieve a formulation with uniform size and monotonic and reproducible release profile. In comparison to batch method, T-junction and serpentine chips were utilized and optim...

journal_title：Pharmaceutical development and technology

authors： Jafarifar E,Hajialyani M,Akbari M,Rahimi M,Shokoohinia Y,Fattahi A

更新日期：2017-09-01 00:00:00

abstract：:Drug release from hydroxypropyl methylcellulose (HPMC) hydrophilic matrix tablets is controlled by drug diffusion through the gel layer of the matrix-forming polymer upon hydration, matrix erosion or combination of diffusion and erosion mechanisms. In this study, the relationship between viscoelastic properties of the...

journal_title：Pharmaceutical development and technology

authors： Hamed R,Al Baraghthi T,Sunoqrot S

更新日期：2018-11-01 00:00:00

abstract：:This paper proposes the development of a drug product Manufacturing Classification System (MCS) based on processing route. It summarizes conclusions from a dedicated APS conference and subsequent discussion within APS focus groups and the MCS working party. The MCS is intended as a tool for pharmaceutical scientists t...

journal_title：Pharmaceutical development and technology

authors： Leane M,Pitt K,Reynolds G,Manufacturing Classification System (MCS) Working Group.

更新日期：2015-01-01 00:00:00