Nano drug delivery systems and gamma radiation sterilization.

abstract：:We have proposed a theory indicating the correlation between the dissolution rate and the heat of solution of drug substances. The initial dissolution rates of the drug substances containing amorphous were predicted accurately from their heats of solution. In this report, the possibility for the theory to estimate the...

journal_title：Pharmaceutical development and technology

authors： Yoshihashi Y,Yonemochi E,Terada K

更新日期：2002-01-01 00:00:00

abstract：:The objective of the present investigation was to formulate and evaluate orodispersible tablets (ODTs) of ondansetron HCl possessing sufficient mechanical strength by wet granulation or direct compression method. A combination of glycine and chitosan was employed for providing a sweet tasting disintegrating system. Th...

journal_title：Pharmaceutical development and technology

authors： Goel H,Vora N,Tiwary AK,Rana V

更新日期：2009-01-01 00:00:00

abstract：:The purpose of this paper is to reject or to confirm the hypothesis that the influence of the water addition rate on the size and size distribution of pellets is caused by insufficient spreading of the added water at higher water addition rates. To overcome insufficient spreading of the added water, the agitation in t...

journal_title：Pharmaceutical development and technology

authors： Vertommen J,Jaucot B,Rombaut P,Kinget R

更新日期：1996-12-01 00:00:00

abstract：:The biopharmaceutical assessment of new drug candidates based on their chemical structure is important in drug discovery and development. The scope of this study is to focus on lipophilic drugs and to clarify the role of their chemical predictors on oral bioavailability in humans. First their chemical properties were ...

journal_title：Pharmaceutical development and technology

authors： Kuentz MT,Arnold Y

更新日期：2009-01-01 00:00:00

abstract：:Aqueous concentrated plain mixtures of dextran and concanavalin A (con A) were examined for their rheological response to glucose for comparison with previously studied partially photopolymerized acrylic derivatives. Non-destructive oscillatory tests were undertaken within the linear viscoelastic range to examine the ...

journal_title：Pharmaceutical development and technology

authors： Taylor MJ,Tanna S,Sahota TS

更新日期：2010-01-01 00:00:00

abstract：:The purpose of this study was to improve the sensitivity and accuracy of quantitative analysis of polymorphic mixtures. Various techniques such as hand grinding and mixing (in mortar and pestle), air jet milling and ball milling for micronization of particle and mixing were used to prepare binary mixtures. Using these...

journal_title：Pharmaceutical development and technology

authors： Alam S,Patel S,Bansal AK

更新日期：2010-09-01 00:00:00

abstract：:An approach for cancer treatment is modulation of tumor microenvironment. Based on the role of extracellular matrix in cell modulation, fabrication of textured materials mimicking extracellular matrix could provide novel opportunities such as determining cancer cell behaviour. With this background, in this work, we ha...

journal_title：Pharmaceutical development and technology

authors： Yaşayan G,Mega Tiber P,Orun O,Alarçin E

更新日期：2020-12-01 00:00:00

abstract：:The main objective of the present study was to improve bioavailability of diltiazem hydrochloride and decrease the frequency of dosage form administration by increasing the encapsulation efficiency of the drug, residence time of the dosage form at the site of absorption and sustained release of the drug from the deliv...

journal_title：Pharmaceutical development and technology

authors： Sultana Y,Mall S,Maurya DP,Kumar D,Das M

更新日期：2009-01-01 00:00:00

abstract：:The hygroscopicity of Brequinar sodium, an organ transplant immunosuppressant, at 75% relative humidity highly depends on the crystal form or crystallinity of the drug substance. Hygroscopicity and ease of water uptake of three lots of Brequinar sodium were investigated. Those lots contained different impurities at le...

journal_title：Pharmaceutical development and technology

authors： Wu LS,Pang J,Hussain MA

更新日期：1996-04-01 00:00:00

abstract：:Stability of captopril in a controlled release formulation has been a challenge for some time. The sustained release of captopril from floating matrices has been studied varying the antioxidant load, the sodium bicarbonate proportion and the compaction pressure. Although in many cases the effect of compaction pressure...

journal_title：Pharmaceutical development and technology

authors： Jiménez-Martínez I,Domínguez-Ramírez AM,Villafuerte-Robles L

更新日期：2009-07-22 00:00:00

abstract：:It is well known that carriers can affect the dissolution of poorly soluble drugs. In this study, our aim was to investigate the dissolution enhancement of carbamazepine solid dispersed or mixed at different loading ratios in crospovidone, polyvinylpyrrolidone, and sodium starch glycolate. The physical state of the dr...

journal_title：Pharmaceutical development and technology

authors： Moneghini M,Voinovich D,Perissutti B,Princivalle F

更新日期：2002-01-01 00:00:00

abstract：:Novel buccal adhesive system (NBAS) containing Nimodipine (N) was prepared and evaluated by different parameters such as weight uniformity, thickness, hardness, surface pH, swelling index, mucoadhesive strength (MS), in vitro drug release and ex vivo drug permeation. Different formulations containing 5-20% Carbopol 93...

journal_title：Pharmaceutical development and technology

authors： Hassan N,Ali M,Ali J

更新日期：2010-03-01 00:00:00

abstract：:A comprehensive analytical solution that accounts for many factors and assumptions affecting drug concentration profile in the gastrointestinal tract was presented. A sensitivity analysis approach was utilized in order to investigate the importance of different parameters in the model. The partition coefficient is fou...

journal_title：Pharmaceutical development and technology

authors： Idkaidek NM,Abdel-Jabbar N

更新日期：2001-01-01 00:00:00

abstract：:The purpose of this study was to investigate the effect of the composition of a binary powder mixture on the bonding index, the brittle fracture index, and the strain index, as defined by Hiestand. The studies involved tensile strength and dynamic indentation hardness determinations of square compacts, the solid fract...

journal_title：Pharmaceutical development and technology

authors： Majuru S,Wurster DE

更新日期：1997-11-01 00:00:00

abstract：:The current work aimed to develop low-density gastroretentive sponges loaded with alfuzosin HCl (ALF) to sustain the rate of drug release, improve its oral bioavailability and deliver it to the main site of absorption. Sponges were developed, according to a 23 full factorial design, by compression of the lyophilized A...

journal_title：Pharmaceutical development and technology

authors： Abd El-Aziz MF,Ismail S,Tadros MI,Elnabarawi MA

更新日期：2020-06-01 00:00:00

abstract：:Mucosa has now been recognized as a potential site for both local and systemic delivery of therapeutics. Mucoadhesive drug delivery systems with customizable release profiles have recently gained considerable interest among formulation scientists to improve clinical outcomes of drugs. This review summarizes the curren...

journal_title：Pharmaceutical development and technology

authors： Kumar A,Naik PK,Pradhan D,Ghosh G,Rath G

更新日期：2020-09-01 00:00:00

abstract：:This study examines the effect of the degree of methoxylation (DM) and particle size on compression properties and compactibility of pectin powders. A powder classification system based on sequential handling of compression parameters was applied. A single size fraction (90-125 μm) of pectin powders with DM values ran...

journal_title：Pharmaceutical development and technology

authors： Salbu L,Bauer-Brandl A,Alderborn G,Tho I

更新日期：2012-05-01 00:00:00

abstract：:Taking into account possible irritation of the skin upon contact with naproxen (NPX) crystals and lower bioavailability after administration of the suspended or ionized drug, the aim of the work was to design and characterize novel and easy-to-formulate gels with the entirely dissolved drug in the acidic form. The for...

journal_title：Pharmaceutical development and technology

authors： Osmałek T,Milanowski B,Froelich A,Górska S,Białas W,Szybowicz M,Kapela M

更新日期：2017-06-01 00:00:00

abstract：:The aim of the present work was to investigate the possibility of achieving buccal delivery of a problematic drug, acyclovir, from films based on chitosan hydrochloride (HCS) and polyacrylic acid sodium salt (PAA). At first, the ionic interaction between HCS and PAA in distilled water was investigated by means of rheo...

journal_title：Pharmaceutical development and technology

authors： Rossi S,Sandri G,Ferrari F,Bonferoni MC,Caramella C

更新日期：2003-01-01 00:00:00

abstract：:The purpose of this study was a comparative evaluation of miniaturized vs. University of Minnesota's (i.e., U of Minn. = Hiestand's) procedures for determining the tensile strength, indentation hardness, and bonding index (BI), one out of three Indices of Tableting Performance (ITP). Tableting properties of six direct...

journal_title：Pharmaceutical development and technology

authors： Lamey K,Schwartz J,Muller F

更新日期：2003-08-01 00:00:00

abstract：:Starches obtained from four different Dioscorea species namely White (D. rotundata), Bitter (D. dumetorum), Chinese (D. oppositifolia) and Water yam (D. alata), were modified by acid hydrolysis and the physicochemical, material and tablet formation properties of the starches were investigated with the aim of determini...

journal_title：Pharmaceutical development and technology

authors： Odeku OA,Picker-Freyer KM

更新日期：2009-01-01 00:00:00

abstract：:This study investigates the physicochemical properties of glycyl-histidyl-lysine-copper (GHK-Cu) to support the development of a formulation for effective topical delivery. The solubility and distribution coefficients (log D) were investigated using conventional methods and GHK concentrations were quantified with a va...

journal_title：Pharmaceutical development and technology

authors： Badenhorst T,Svirskis D,Wu Z

更新日期：2016-03-01 00:00:00

abstract：:Mechanically generated radicals were shown to affect short-term stability of a model pharmaceutical formulation during high-shear processing. A formulation containing an oxidatively sensitive drug, either amorphous or crystalline, and a polymeric excipient was high-shear mixed and the resulting short-term degradation ...

journal_title：Pharmaceutical development and technology

authors： Polizzi MA,Singhal D,Colvin J

更新日期：2008-01-01 00:00:00

abstract：:The purpose of this research was to design and develop a novel controlled-release bead formulation for oral administration with buffer crystals as a carrier for loading of fenoldopam mesylate, an intravenous antihypertensive agent, which provides an in vitro release rate of 30-50 mg/hr for 6-8 hr. Buffer crystals were...

journal_title：Pharmaceutical development and technology

authors： Venkatesh GM

更新日期：1998-11-01 00:00:00

abstract：:Drug release from hydroxypropyl methylcellulose (HPMC) hydrophilic matrix tablets is controlled by drug diffusion through the gel layer of the matrix-forming polymer upon hydration, matrix erosion or combination of diffusion and erosion mechanisms. In this study, the relationship between viscoelastic properties of the...

journal_title：Pharmaceutical development and technology

authors： Hamed R,Al Baraghthi T,Sunoqrot S

更新日期：2018-11-01 00:00:00

abstract：:The first-line therapy for moderate to severe benign prostatic hyperplasia is the oral therapy by alfuzosin hydrochloride. Unfortunately, the oral therapy of alfuzosin is associated with several route-specific systemic side-effects. The current study was aimed to develop a prototype transdermal patch system for alfuzo...

journal_title：Pharmaceutical development and technology

authors： Nair AB,Vaka SR,Gupta S,Repka MA,Murthy SN

更新日期：2012-03-01 00:00:00

abstract：:Novel fast-disintegrating multi-unit tablets (FDMUTs) were prepared to modify the release of lornoxicam (a potent non-steroidal anti-inflammatory drug with a short half-life) as well as to combine the advantages of multi-unit systems with the cost-effectiveness of compressed tablets. The proposed FDMUTs consisted of s...

journal_title：Pharmaceutical development and technology

authors： Aburahma MH,Hamza Yel-S

更新日期：2011-08-01 00:00:00

abstract：:A carbopol 934P-based drug delivery system (AmDDS) was developed to achieve the dual-controlled delivery of Nonoxynol-9 (N-9), a spermicidal agent, and EDTA, a potentiator of spermicidal activity. This gel-type system made intimate contact with vaginal mucosa and maintained an effective drug concentration within the v...

journal_title：Pharmaceutical development and technology

authors： Lee CH,Chien YW

更新日期：1996-07-01 00:00:00

abstract：:The purpose of this work was to investigate the effect that changes in design and process variables had on the movement of particles around a fluidized bed coating apparatus. To measure the mean and variance of the particle cycle time distribution (CTD), the number of passages taken by a magnetic tracer particle throu...

journal_title：Pharmaceutical development and technology

authors： Cheng XX,Turton R

更新日期：2000-01-01 00:00:00

abstract：CONTEXT:Bioadhesiviness of polyacrylic acid polymers make them promising hydrogels to design topical drug delivery systems, allowing a close contact with biological substrate as well as an enhanced local concentration gradient, both factors that may improve the biological performance of the drugs. AIM:Texture and bioa...

journal_title：Pharmaceutical development and technology

authors： Calixto G,Yoshii AC,Rocha e Silva H,Stringhetti Ferreira Cury B,Chorilli M

更新日期：2015-06-01 00:00:00