Surface analysis of dentinal caries in primary teeth using a pH-imaging microscope.

abstract：:The aim of this study was to examine the lifespan or number of cycles to failure of tapered rotary nickel-titanium (Ni-Ti) endodontic instruments. Simulated root canals with different curvatures were used to determine a relation between canal curvature and instrument lifespan. Using a novel mathematical model for the ...

journal_title：Dental materials journal

authors： Stojanac I,Drobac M,Petrovic L,Atanackovic T

更新日期：2012-01-01 00:00:00

abstract：:This study investigated the effect of bulk-fill composites on proximal contact tightness (PCT) of composite restorations using different matrix systems. 150/standardized-MO-ivorine cavity preparations were divided into 5 groups; Smart Dentin Replacement (SDR), SonicFill (SF), Tetric EvoCeram Bulk-Fill (TEB), G-ænial U...

journal_title：Dental materials journal

authors： El-Shamy H,Sonbul H,Alturkestani N,Tashkandi A,Loomans BA,Dörfer C,El-Badrawy W

更新日期：2019-02-08 00:00:00

abstract：:This study investigated the effects of spherical silica fillers on the physical and mechanical properties of resin-modified glass-ionomer cement (RMGIC). Specimens were fabricated by mixing untreated (UF) or silanized (SF) spherical silica filler into the powder of a commercially prepared RMGIC. The original RMGIC and...

journal_title：Dental materials journal

authors： Tjandrawinata R,Irie M,Yoshida Y,Suzuki K

更新日期：2004-06-01 00:00:00

abstract：:Surface replication is a nondestructive evaluation technique applied in examining surfaces' cracks/wear. This is quite valuable when the surface of interest cannot be further manipulated by cutting or polishing to fit directly under a microscope. Replication by acetate sheets is one of the techniques applied in indust...

journal_title：Dental materials journal

authors： Ijbara M,Wada K,Wada J,Jayawardena JA,Miyashin M

更新日期：2019-02-08 00:00:00

abstract：:The influence of a thin carbonate-containing hydroxyapatite (CA) coating to tetragonal zirconia polycrystal (TZP) on osteoblastlike cell response was investigated. TZP disks were subjected to blasting and acid etching. Thin CA coatings were deposited by the molecular precursor method (TZP-CA). Initial cell adhesion of...

journal_title：Dental materials journal

authors： Kaneko H,Sasaki H,Honma S,Hayakawa T,Sato M,Yajima Y,Yoshinari M

更新日期：2014-01-01 00:00:00

abstract：:The aim of this study was to investigate and compare the radio-opacity of core materials for all-ceramic restorations, such as zirconia (NANOZR and Y-TZP) and alumina, against commercially pure titanium (cpTi) and aluminum. X-ray images were taken under general settings using an X-ray film. The X-ray film images were ...

journal_title：Dental materials journal

authors： Okuda Y,Noda M,Kono H,Miyamoto M,Sato H,Ban S

更新日期：2010-01-01 00:00:00

abstract：:Initial attachment of human oral keratinocytes (HOKs) cultured on mirror-surfaced commercially pure titanium (Ti) or yttria-stabilized tetragonal zirconia polycrystals (TZP) was investigated. Numbers of viable attached HOKs, their mRNAs and proteins expression of laminin γ2 and integrin β4 were evaluated using the WST...

journal_title：Dental materials journal

authors： Kimura Y,Matsuzaka K,Yoshinari M,Inoue T

更新日期：2012-01-01 00:00:00

abstract：:Besides micro-mechanical interlocking through hybrid-layer formation, self-etch adhesives may benefit from additional chemical interaction between the functional monomer and residual hydroxyapatite. One-step adhesives are commonly associated with lower bonding effectiveness, which must be attributed in part to the dis...

journal_title：Dental materials journal

authors： Van Meerbeek B,Van Landuyt K,De Munck J,Hashimoto M,Peumans M,Lambrechts P,Yoshida Y,Inoue S,Suzuki K

更新日期：2005-03-01 00:00:00

abstract：:A new type of self-etching agent, the single-step adhesive, was developed. The purpose of this study was to investigate the difference in the ultrastructural features of enamel and dentin surfaces following application of the prototype single-step adhesive (EXM618, 3M, MN, USA). Extracted caries-free human premolars w...

journal_title：Dental materials journal

authors： Han L,Cruz E,Fukushima M,Okamoto A,Okiji T

更新日期：2004-09-01 00:00:00

abstract：:The effects of desensitizer, disinfectant, saliva, blood, and hydrogen peroxide on the tensile bond strength between adhesive and ceramic as well as between adhesive and dentin were examined. Sixty 7x3 mm pressed ceramic discs of IPS e.max were fabricated and randomly assigned to six groups of different dentin surface...

journal_title：Dental materials journal

authors： Zortuk M,Kilic K,Gurbulak AG,Kesim B,Uctasli S

更新日期：2010-08-01 00:00:00

abstract：:This study evaluated the biomineralization and dentinal tubules occlusion abilities of the carboxyl-terminated polyamidoamine dendrimer (PAMAM-COOH) on human demineralized dentin in vivo at different time points. Demineralization dentin model with and without treated with PAMAM-COOH were sutured to the interior side o...

journal_title：Dental materials journal

authors： Xie F,Wei X,Li Q,Zhou T

更新日期：2016-01-01 00:00:00

abstract：:The present study investigated the influences of a denture strengthener on the deformation of a maxillary complete denture. Three groups of maxillary complete dentures were fabricated (Group 1 without a strengthener; Group 2 with a Co-Cr alloy wire strengthener; Group 3 with an experimental fiberglass strengthener). T...

journal_title：Dental materials journal

authors： Hirajima Y,Takahashi H,Minakuchi S

更新日期：2009-07-01 00:00:00

abstract：:Although titanium has been widely used in prosthetic appliances, such as cast removable partial denture frameworks, high quality castings are still difficult to obtain. This study proposes a new partition technique using a metal foil for improving castability of a two-chamber pressure casting unit. The metal foil was ...

journal_title：Dental materials journal

authors： Watanabe K,Okawa S,Kanatani M,Nakano S,Miyakawa O,Kobayashi M

更新日期：2000-09-01 00:00:00

abstract：:This study compared differences in discoloration and dissolution in several titanium alloys with immersion in peroxide- or fluoride-containing solution. Commercially pure titanium (CP-Ti) and six titanium-based alloys were used: Ti-0.15Pd, Ti-6Al-4V, Ti-7Nb-6Al, Ti-55Ni, Ti-10Cu, and Ti-20Cr. Two test solutions were p...

journal_title：Dental materials journal

authors： Noguchi T,Takemoto S,Hattori M,Yoshinari M,Kawada E,Oda Y

更新日期：2008-01-01 00:00:00

abstract：:The aim of this review is to evaluate the long-term effectiveness of calcium silicate-based cement (CS) and calcium hydroxide (CH) for direct pulp capping (DPC) to human pulp-exposed permanent teeth. An electronic search and manual search were performed on 21 June 2019. Long-term clinical and radiographic evaluations ...

journal_title：Dental materials journal

authors： Matsuura T,Ziauddin SM,Kawata-Matsuura VKS,Sugimoto K,Yamada S,Yoshimura A

更新日期：2020-10-01 00:00:00

abstract：:This study was designed to evaluate the cytotoxicity of four dentin bonding agents and the effects of an antioxidant addition. Group A: G-aenial Bond, Group B: Optibond All in One, Group C: Gluma Self Etch and Group D: Clearfil S(3) Bond were added to the medium using extract method. The cells were cultured with or wi...

journal_title：Dental materials journal

authors： Atalayin C,Armagan G,Konyalioglu S,Kemaloglu H,Tezel H,Ergucu Z,Keser A,Dagci T,Onal B

更新日期：2015-01-01 00:00:00

abstract：:This study was carried out to investigate the influences of elastic moduli of the dowel-core combination on the stress distribution in the root by the use of 2-dimensional finite element analysis. The peak stress at the dowel-cement interface was influenced strongly by a change of elastic modulus of the post (from 20,...

journal_title：Dental materials journal

authors： Ukon S,Moroi H,Okimoto K,Fujita M,Ishikawa M,Terada Y,Satoh H

更新日期：2000-03-01 00:00:00

abstract：:To improve the bioactivity of titanium surfaces, glow discharge was used to facilitate collagen grafting on titanium disks. Titanium test specimens were pre-treated by glow discharge fed with a mixture of argon and allylamine (AA) gases. Treated titanium disks were then grafted with type I collagen using glutaraldehyd...

journal_title：Dental materials journal

authors： Chang WJ,Ou KL,Lee SY,Chen JY,Abiko Y,Lin CT,Huang HM

更新日期：2008-05-01 00:00:00

abstract：:We investigated the effects of CO2 laser irradiation combined with acidulated phosphate fluoride (APF) application on the demineralization of enamel. APF gel was applied to the buccal enamel of human premolars and CO2 laser was applied. After the specimens were immersed in demineralization solution for 72 h, they were...

journal_title：Dental materials journal

authors： Nakagaki S,Iijima M,Endo K,Saito T,Mizoguchi I

更新日期：2015-01-01 00:00:00

abstract：:The kinetic polymerization behavior of 2,2,2-trifluoroethyl methacrylate (TFEMA), 1,1,1,3,3,3-hexafluoroisopropyl methacrylate (HFIPMA), 2,2,2-trifluoroethyl acrylate (TFEA) and 1,1,1,3,3,3-hexafluoroisopropyl acrylate (HFIPA) was determined by isothermal differential scanning calorimetry (DSC) and high-performance li...

journal_title：Dental materials journal

authors： Kadoma Y

更新日期：2010-10-01 00:00:00

abstract：:The efficacy of four commercial and two experimental dentin bonding systems was examined by observing the cavity adaptation of commercial light-cured resin composites restored in the dogs scheduled to be sacrificed after a medical experiment. Before being sacrificed, a cylindrical class V cavity was prepared in each c...

journal_title：Dental materials journal

authors： Tani C,Itoh K,Ohba M,Tada K,Manabe A,Hisamitsu H,Wakumoto S

更新日期：1998-09-01 00:00:00

abstract：:The purpose of this study was to evaluate the effects of dentin attrition, phosphoric acid etching, and cyclic loading on the microtensile bond strength (microTBS) of a self-etching adhesive system to dentin. Flat dentin surfaces of human molars were assigned to eight experimental groups based on those with or without...

journal_title：Dental materials journal

authors： Shinkai K,Ebihara T,Shirono M,Seki H,Wakaki S,Suzuki M,Suzuki S,Katoh Y

更新日期：2009-03-01 00:00:00

abstract：:This in vitro study aimed to investigate the effects of glass-ionomer and flowable composite liners on the fracture resistance of Class II amalgam and composite restorations. Group 1 cavities were restored with amalgam and Group 4 cavities with nanofill composite after the application of a dentin-bonding agent. For th...

journal_title：Dental materials journal

authors： Güray Efes B,Yaman BC,Gümüştaş B,Tıryakı M

更新日期：2013-01-01 00:00:00

abstract：:In this study, two types of porous zirconia and dense zirconia were used. The flexural strength of non-layered zirconia specimens and those of the layered zirconia specimens with veneering porcelain were examined. Furthermore, the shear bond strength of veneering porcelain to zirconia was examined. The flexural streng...

journal_title：Dental materials journal

authors： Nakamura T,Sugano T,Usami H,Wakabayashi K,Ohnishi H,Sekino T,Yatani H

更新日期：2014-01-01 00:00:00

abstract：:Chemical mechanical polishing (CMP) of cpTi (Ti) was carried out using two types of slurries, acidic and basic colloidal silica containing H2O2 up to 3 wt%, to obtain flat and mirror-polished surfaces without any contaminated and reacted layers. Polishing behavior and surface properties were investigated using AFM, EP...

journal_title：Dental materials journal

authors： Okawa S,Watanabe K

更新日期：2009-01-01 00:00:00

abstract：:Though zirconia has been used in dental implant fixtures, the biocompatibility of the zirconia surface is not optimal for the surrounding tissue, and many surface modifications have been attempted. We have developed a novel method for improving the biocompatibility of zirconia by incorporating Ca ions. Elemental analy...

journal_title：Dental materials journal

authors： Sasaki K,Hayashi T,Asakura M,Ando M,Kawai T,Ban S

更新日期：2015-01-01 00:00:00

abstract：:This study was evaluating how three desensitizing toothpastes used at home influence the effect associated with desensitizing agents after application in the clinic. Fifty dentine disks measure it permeability and 32 dentine disks with similar permeability levels were selected. Following Dental desensitizer treatment,...

journal_title：Dental materials journal

authors： Hu ML,Zheng G,Jiang RD,Han JM,Zhang YD,Lin H

更新日期：2020-09-29 00:00:00

abstract：:The aim was to characterize by atomic force microscopy (AFM) the nanostructure of human dentin surfaces affected by dental fluorosis (DF) before and after phosphoric acid etching. This study included 240 human dentin samples classified according to the severity of DF, which were divided into four groups using the Thyl...

journal_title：Dental materials journal

authors： Zavala-Alonso V,Aguilera-Flores R,Patiño-Marin N,Martinez-Castañon GA,Anusavice KJ,Loyola-Rodriguez JP

更新日期：2011-01-01 00:00:00

abstract：:To elucidate the cause of brittleness of porcelain fused to pure titanium (PFPT) which leads to chipping and cracking similar to that of conventional porcelain in clinical use, fracture toughness KIc, hardness (Hv and Hk) and fracture energy gamma reflecting the bonding energy of atoms were evaluated. In KIc there wer...

journal_title：Dental materials journal

authors： Higashino Y,Yamauchi M,Goto T,Nagasawa T

更新日期：2003-12-01 00:00:00

abstract：:Adhesion promoting monomers for precious metals, 2,3-epithiopropyl methacrylate (EP1MA), 4,5-epithiopentyl methacrylate (EP3MA), 9,10-epithiodecyl methacrylate (EP8MA), 10,11-epithioundecyl methacrylate (EP9MA), 9,10-epithiodecyl 4-vinylbenzoate (EP8VB), 2,3-epithiocyclohexyl methacrylate (EPCHMA), and 3,4-epithiobuty...

journal_title：Dental materials journal

authors： Kadoma Y,Kojima K,Tamaki Y,Nomura Y

更新日期：2007-01-01 00:00:00