Type I collagen grafting on titanium surfaces using low-temperature glow discharge.

abstract：:The purpose of this study was to evaluate the influence of heating, cast bonding, and subsequent polishing procedures on attractive force of magnetic attachments. Two magnetic attachment systems with keepers of different chemical compositions (Hicorexslim 3013, 447J1; Magfit EX400, AUM20) were employed. Keepers examin...

journal_title：Dental materials journal

authors： Ohashi N,Koizumi H,Ishikawa Y,Furuchi M,Matsumura H,Tanoue N

更新日期：2007-05-01 00:00:00

abstract：:The secretion of collagen by osteoblasts was observed by scanning electron microscopy (SEM). Osteoblast-like cells were cultured on a CO3apatite-collagen sponge reinforced with a porous HAp frame. After three days' incubation, a number of newly created matrix fibrils, forming a network structure, were observed at the ...

journal_title：Dental materials journal

authors： Hirata I,Nomura Y,Tabata H,Miake Y,Yanagisawa T,Okazaki M

更新日期：2005-09-01 00:00:00

abstract：:This study investigated the effect of a coating material containing S-PRG fillers on the demineralization of bovine enamel and dentin, by measuring changes in the transmitted ultrasonic velocity. Bovine enamel and dentin specimens with and without coating (n=6 for each condition) were cut into blocks, immersed in 0.1 ...

journal_title：Dental materials journal

authors： Murayama R,Furuichi T,Yokokawa M,Takahashi F,Kawamoto R,Takamizawa T,Kurokawa H,Miyazaki M

更新日期：2012-01-01 00:00:00

abstract：:In this study, different glasses were investigated to improve reusable investments. Borosilicate glass (BSG) powder and soda-lime glass (SLG) powder were prepared by milling broken beakers and microscope slides, respectively, and used in experimental investments (I-BSG, I-SLG) by blending glass powder (10 wt%) with cr...

journal_title：Dental materials journal

authors： Yagi S,Zhang Z,Aida Y,Hotta Y,Tamaki Y,Miyazaki T

更新日期：2011-01-01 00:00:00

abstract：:The biaxial flexural strength and cyclic fatigue biaxial flexural strength of CAD/CAM ceramics polished with #220, 400, 600 and 1000 diamond pads were measured in an effort to determine the effect of surface roughness on fatigue behavior of dental ceramics. The surface roughness was improved after polishing with a sma...

journal_title：Dental materials journal

authors： Nakazato T,Takahashi H,Yamamoto M,Nishimura F,Kurosaki N

更新日期：1999-12-01 00:00:00

abstract：:The purpose of this study was to investigate the effects of the location and orientation of dentinal tubules in the tooth on tensile strengths of the dentin. Dumbbell-shaped specimens of 12 groups from various locations and dentinal tubule orientations were prepared. The tensile test was performed in distilled water a...

journal_title：Dental materials journal

authors： Inoue T,Takahashi H,Nishimura F

更新日期：2002-03-01 00:00:00

abstract：:This study compared differences in discoloration and dissolution in several titanium alloys with immersion in peroxide- or fluoride-containing solution. Commercially pure titanium (CP-Ti) and six titanium-based alloys were used: Ti-0.15Pd, Ti-6Al-4V, Ti-7Nb-6Al, Ti-55Ni, Ti-10Cu, and Ti-20Cr. Two test solutions were p...

journal_title：Dental materials journal

authors： Noguchi T,Takemoto S,Hattori M,Yoshinari M,Kawada E,Oda Y

更新日期：2008-01-01 00:00:00

abstract：:The study evaluated changes in total enzymatic activity and degradation of demineralized dentin following the application of universal or self-etch adhesives. The universal adhesives -Scotchbond Universal (SU) and All-Bond Universal (ABU) and self-etch adhesives -Adper Easy Bond (EB) and G-aenial Bond (GB) were used f...

journal_title：Dental materials journal

authors： Ahmet BSO,Seseogullari-Dirihan R,Tezvergil-Mutluay A

更新日期：2020-12-03 00:00:00

abstract：:The purpose of this study was to establish a method using FTIR to evaluate the polymerization characteristics of UDMA-based resins. Three kinds of experimental UDMA-based resins were prepared with various molar fractions. IR spectra of the cured film specimens were measured with FTIR before and after extracting residu...

journal_title：Dental materials journal

authors： Nomoto R,Hirasawa T

更新日期：1999-06-01 00:00:00

abstract：:The depths of calcium-ion incorporation into a commercially pure titanium and an experimental beta-type titanium alloy were determined using Auger electron spectroscopy. After the electrochemical deposition of apatite, new compositional gradients appeared in the profiles in which the Ca and P concentrations gradually ...

journal_title：Dental materials journal

authors： Ban S,Kamiya A,Sonoda T

更新日期：2002-12-01 00:00:00

abstract：:The hardened alpha-case (alpha-case) layer inevitably forms on the surface of titanium castings when prepared by investment casting. Because the hardness of the alpha-case is incomparable to that of the interior structure, the perception exists that the alpha-case is difficult to remove during cutting, grinding and po...

journal_title：Dental materials journal

authors： Koike M,Jacobson D,Chan KS,Okabe T

更新日期：2009-09-01 00:00:00

abstract：:The purpose of this study was to examine the effect of an electro-ionizing toothbrush with stannous fluoride in the treatment of dentin hypersensitivity following periodontal surgery. Thirty-two volunteers with dentin hypersensitivity were divided in two equal groups each using different methods: (Group I) stannous fl...

journal_title：Dental materials journal

authors： Orbak R,Canakçi V,Tezel A

更新日期：2001-06-01 00:00:00

abstract：:This study sought to evaluate the effects of different staining solutions on the colour stability of nanocomposites compared with microhybrid resin and to evaluate the degree of conversion of these two materials. Two different shades of two different composites were cured in polytetraflouroethylene disk rings. Coffee,...

journal_title：Dental materials journal

authors： Al Kheraif AA,Qasim SS,Ramakrishnaiah R,Ihtesham ur Rehman

更新日期：2013-01-01 00:00:00

abstract：:This study evaluated the effects of combining enamel microabrasion and dental bleaching on the physical properties of enamel, using in vitro and in situ conditions and evaluating surface roughness, enamel microhardness and scanning electron microscopy images. One hundred sound bovine teeth were sectioned and cut into ...

journal_title：Dental materials journal

authors： Franco LM,Machado LS,Salomão FM,Dos Santos PH,Briso AL,Sundfeld RH

更新日期：2016-01-01 00:00:00

abstract：:This study was carried out to investigate the influences of elastic moduli of the dowel-core combination on the stress distribution in the root by the use of 2-dimensional finite element analysis. The peak stress at the dowel-cement interface was influenced strongly by a change of elastic modulus of the post (from 20,...

journal_title：Dental materials journal

authors： Ukon S,Moroi H,Okimoto K,Fujita M,Ishikawa M,Terada Y,Satoh H

更新日期：2000-03-01 00:00:00

abstract：:The purpose of the present study was to evaluate the effect of four silane coupling agents on the bond strength between two resin-modified glass ionomer cements and a machinable leucite glass ceramic. Ceramic specimens were ground with silicon carbide paper and cleaned with phosphoric acid. They were then conditioned ...

journal_title：Dental materials journal

authors： Kamada K,Taira Y,Yoshida K,Atsuta M

更新日期：2007-03-01 00:00:00

abstract：:This study aimed to investigate the relationship between the radiopacity of an experimental light-cured composite resin and the amount and type of its radiopaque material: Ti, SrCO3, ZrO2, BaSO4, or Bi2O3. Radiopacity of each material was evaluated in terms of aluminum equivalent thickness using an aluminum step wedge...

journal_title：Dental materials journal

authors： Aoyagi Y,Takahashi H,Iwasaki N,Honda E,Kurabayashi T

更新日期：2005-09-01 00:00:00

abstract：:This study evaluated the irrigation extrusion and smear layer (SL) removal of continuous ultrasonic irrigation (CUI). Forty root canals were shaped, embedded in warm sterile saline agar colored with 1% acid red, and distributed into four groups; three groups had the final irrigation sequence of sodium hypochlorite and...

journal_title：Dental materials journal

authors： Jamleh A,Suda H,Adorno CG

更新日期：2018-01-30 00:00:00

abstract：:The bactericidal efficacy of 1.00-4.50% glycine-type amphoteric surfactant (Gly) was evaluated by measuring its microorganism removal rate in denture plaque. Physical and mechanical properties such as surface roughness, color difference, and bending strength of two different denture base resins were determined before ...

journal_title：Dental materials journal

authors： Hashiguchi M,Nishi Y,Kanie T,Ban S,Nagaoka E

更新日期：2009-05-01 00:00:00

abstract：:This study investigated the effects of spherical silica fillers on the physical and mechanical properties of resin-modified glass-ionomer cement (RMGIC). Specimens were fabricated by mixing untreated (UF) or silanized (SF) spherical silica filler into the powder of a commercially prepared RMGIC. The original RMGIC and...

journal_title：Dental materials journal

authors： Tjandrawinata R,Irie M,Yoshida Y,Suzuki K

更新日期：2004-06-01 00:00:00

abstract：:We examined the mold filling capacity and microhardness of two industrial 1% Fe titanium alloys: Super-TIX800 (Nippon Steel Corp.) (Fe: 0.910%, O: 0.370%, N: 0.005%) and Super-TIX800N (Nippon Steel Corp.) (Fe: 0.960%, O: 0.300%, N: 0.041%). Two wedge-shaped acrylic patterns (with 30 degrees or 15 degrees angles) were ...

journal_title：Dental materials journal

authors： Sato H,Komatsu M,Miller B,Shimizu H,Fujii H,Okabe T

更新日期：2004-06-01 00:00:00

abstract：:'Tooth-coloured' ProRoot MTA is an endodontic cement comprising an 80:20 wt% mixture of white Portland cement (WPC) and bismuth oxide. The setting reactions within this cement system are not currently well understood. Accordingly, this research monitors the early hydration chemistry of ProRoot MTA by X-ray diffraction...

journal_title：Dental materials journal

authors： Li Q,Coleman NJ

更新日期：2015-01-01 00:00:00

abstract：:The effect of warm air-blowing on the sealing ability of two one-bottle and one two-bottle silane-containing universal adhesives (UAs) applied to lithium disilicate ceramics (LDS) was evaluated. Tapered cavities prefabricated in LDS blocks (IPS e.max CAD) were treated by the adhesives, air-blown either with normal air...

journal_title：Dental materials journal

authors： Kaykhine P,Tichy A,Abdou A,Hosaka K,Foxton RM,Sumi Y,Nakajima M,Tagami J

更新日期：2020-10-24 00:00:00

abstract：:This study evaluated the effects of ceramic surface treatment agents on shear bond strengths to ceramic materials with and without thermocycling. Ceramic plates were prepared from feldspathic ceramic; AAA, lithium disilicate ceramic material; IPS e.max Press, zirconia ceramic; Lava. Ceramic surfaces were pretreated wi...

journal_title：Dental materials journal

authors： Noda Y,Nakajima M,Takahashi M,Mamanee T,Hosaka K,Takagaki T,Ikeda M,Foxton RM,Tagami J

更新日期：2017-11-29 00:00:00

abstract：:This study evaluated the influence of an aqueous propolis-based solution (PROP) on gap formation and bond strength of posts bonded to root canal dentin using resin cements. Endodontically-treated bovine incisors received different irrigation protocols: 1) 2.5% sodium hypochlorite (NaOCl)/17% EDTA/NaOCl; 2) saline solu...

journal_title：Dental materials journal

authors： Matochek MHM,Tomaz PLS,Oliveira TS,Polassi MR,Alonso RCB,Scremin FM,Sauro S,Marcucci MC,D'Alpino PHP

更新日期：2020-06-05 00:00:00

abstract：:The purpose of this study was to examine the antibacterial activity of composite resin with glass-ionomer filler particles versus that of contemporary commercial composite resins. Three composite resins were used: Beautifil II (containing S-PRG filler), Clearfil AP-X, and Filtek Z250. Resin blocks were bonded to maxil...

journal_title：Dental materials journal

authors： Saku S,Kotake H,Scougall-Vilchis RJ,Ohashi S,Hotta M,Horiuchi S,Hamada K,Asaoka K,Tanaka E,Yamamoto K

更新日期：2010-03-01 00:00:00

abstract：:The purpose of the present study was to analyze effective factors including periodontal ligament on vertical root fractures (VRFs). Eighty maxillary central incisors were assigned to eight groups, depending on master apical file (MAF) size, loading point and existence of a simulated periodontal ligament (PDL). The gut...

journal_title：Dental materials journal

authors： Okitsu M,Takahashi H,Yoshioka T,Iwasaki N,Suda H

更新日期：2005-03-01 00:00:00

abstract：:This paper reviews the development of dental adhesives by collating information of related studies from original scientific papers, reviews, and patent literatures. Through our development, novel radical polymerization initiators, adhesive monomers, and microcapsules were synthesized, and their effects on adhesion wer...

journal_title：Dental materials journal

authors： Ikemura K,Endo T

更新日期：2010-03-01 00:00:00

abstract：:We aimed to establish an experimental animal model to evaluate materials for endodontic therapy. We focused on the biocompatibility of new paste-type zinc oxide-eugenol (ZOE) sealer. The results of this sealer were compared with those of conventional powder/liquid ZOE and eugenol-free sealers. The molars of Wistar rat...

journal_title：Dental materials journal

authors： Mutoh N,Tani-Ishii N

更新日期：2011-01-01 00:00:00

abstract：:The present study investigated the influences of a denture strengthener on the deformation of a maxillary complete denture. Three groups of maxillary complete dentures were fabricated (Group 1 without a strengthener; Group 2 with a Co-Cr alloy wire strengthener; Group 3 with an experimental fiberglass strengthener). T...

journal_title：Dental materials journal

authors： Hirajima Y,Takahashi H,Minakuchi S

更新日期：2009-07-01 00:00:00