Antibacterial activity of composite resin with glass-ionomer filler particles.

abstract：:This study evaluated and compared the influence of different supporting abutment models on the fracture loads of three-unit fixed dental prostheses (FDPs) fabricated from the following materials (n=24/material): (i) IPS e.max CAD-on, (ii) IPS e.max ZirCAD, and (iii) Telio CAD. Twelve FDPs of each group were adhesively...

journal_title：Dental materials journal

authors： Wimmer T,Erdelt KJ,Eichberger M,Roos M,Edelhoff D,Stawarczyk B

更新日期：2014-01-01 00:00:00

abstract：:This study aimed to determine the influence of sodium hypochlorite (NaOCl) contamination on the microhardness of build-up composites. Fifty-two samples, from each of three build-up materials (LuxaCore Dual, MultiCore flow and Rebilda DC) were prepared. Half of the samples from each material were stored in physiologic ...

journal_title：Dental materials journal

authors： Wegehaupt FJ,Betschart J,Attin T

更新日期：2010-08-01 00:00:00

abstract：:We examined the mold filling capacity and microhardness of two industrial 1% Fe titanium alloys: Super-TIX800 (Nippon Steel Corp.) (Fe: 0.910%, O: 0.370%, N: 0.005%) and Super-TIX800N (Nippon Steel Corp.) (Fe: 0.960%, O: 0.300%, N: 0.041%). Two wedge-shaped acrylic patterns (with 30 degrees or 15 degrees angles) were ...

journal_title：Dental materials journal

authors： Sato H,Komatsu M,Miller B,Shimizu H,Fujii H,Okabe T

更新日期：2004-06-01 00:00:00

abstract：:The aim of this study was to investigate the effects of potassium fluoride (KF) and sodium fluoride (NaF) in different concentrations on micro-shear bond strength (µSBS) and their protective effects against acid. The enamel blocks were treated with several concentrations of KF and NaF. For µSBS, Clearfil SE Bond 2 was...

journal_title：Dental materials journal

authors： Al-Qahtani A,Inoue G,Abdou A,Nikaido T,Tagami J

更新日期：2020-10-27 00:00:00

abstract：:This study evaluated the irrigation extrusion and smear layer (SL) removal of continuous ultrasonic irrigation (CUI). Forty root canals were shaped, embedded in warm sterile saline agar colored with 1% acid red, and distributed into four groups; three groups had the final irrigation sequence of sodium hypochlorite and...

journal_title：Dental materials journal

authors： Jamleh A,Suda H,Adorno CG

更新日期：2018-01-30 00:00:00

abstract：:This study was to evaluate the load bearing capacity of monolithic dental zirconia crowns, and the effect of surface finishing on fracture strength. (1) The zirconia plates were divided into 5 groups and polished by various types of polishing bur, every specimen was analyzed by surface roughness testing, and X-ray dif...

journal_title：Dental materials journal

authors： Yin R,Lee MH,Bae TS,Song KY

更新日期：2019-03-31 00:00:00

abstract：:The microstructure and homogeneity of three commercial dentin and incisal unfired porcelain frits (one conventional and two ultra-low fusing types, fused-to metal were analyzed by X-ray diffractometry, scanning electron microspectroscopy, and wavelength- and energy dispersive X-ray microspectroscopy. The average conte...

journal_title：Dental materials journal

authors： Ban S,Matsuo K,Mizutani N,Iwase H,Kani T,Hasegawa J

更新日期：1998-12-01 00:00:00

abstract：:Improved osseointegration of dental implants is imperative in clinic. Effect of doxycycline on promoting bone formation after implant placement was expected due to its inhibitory properties on inflammation and osteoclastogenesis. To evaluate new bone formation on the hydroxyapatite (HA)-coated implant surface, which w...

journal_title：Dental materials journal

authors： Ding L,Zhang P,Wang X,Hao J,Aoki K,Kuroda S,Kasugai S

更新日期：2018-01-30 00:00:00

abstract：:This study investigated hydrogen peroxide (H2O2) concentration of two home bleaching gels, in their dispensing syringes and their degradation in vivo in intraoral bleaching trays. Two bleaching gels were studied, 7.5% hydrogen peroxide (HP) and 20% carbamide peroxide (CP). The concentration of H2O2 was determined in d...

journal_title：Dental materials journal

authors： Alonso De La Peña V,Rodriguez Carreira A,Corral Aneiros R,López Ratón M,Guitián Rivera F

更新日期：2013-01-01 00:00:00

abstract：:The aim of this study was to investigate and compare the radio-opacity of core materials for all-ceramic restorations, such as zirconia (NANOZR and Y-TZP) and alumina, against commercially pure titanium (cpTi) and aluminum. X-ray images were taken under general settings using an X-ray film. The X-ray film images were ...

journal_title：Dental materials journal

authors： Okuda Y,Noda M,Kono H,Miyamoto M,Sato H,Ban S

更新日期：2010-01-01 00:00:00

abstract：:This study investigated the durability, especially the nonwaterdegradable qualities, of experimental light-cured composite resin containing barium-borosilicate glass filler. For this purpose, Bis-GMA, a typical component of base monomer in conventional composite resin, was replaced by Bis-GMA-F which is water-repellen...

journal_title：Dental materials journal

authors： Tanaka J,Inoue K,Masamura H,Matsumura K,Nakai H,Inoue K

更新日期：1993-06-01 00:00:00

abstract：:The objective of this work was to analyze the antimicrobial and antibiofilm activities of bismuth lipophilic nanoparticles (BisBAL NPs) incorporated into chitosan-based membranes. Chitosan-based membranes were homogeneously embedded with BisBAL NPs, confirming the bismuth presence by scanning electron microscopy. The ...

journal_title：Dental materials journal

authors： Martínez-Martínez MA,Hernandez-Delgadillo R,Abada BS,Pineda-Aguilar N,Solís-Soto JM,Nakagoshi-Cepeda MAA,Nakagoshi-Cepeda SE,Chellam S,Sánchez-Nájera RI,Cabral-Romero C

更新日期：2019-07-31 00:00:00

abstract：:Bioactive-glass (B-G) is a material known for its favorable biological response when in contact with surrounding fibro-osseous tissues, due not only to an osteoconductive property, but also to an osteostimulatory capacity, and superior biocompatibility for use in human body. The objectives of this paper are to review ...

journal_title：Dental materials journal

authors： Profeta AC,Prucher GM

更新日期：2015-01-01 00:00:00

abstract：:This study investigated the effect of bulk-fill composites on proximal contact tightness (PCT) of composite restorations using different matrix systems. 150/standardized-MO-ivorine cavity preparations were divided into 5 groups; Smart Dentin Replacement (SDR), SonicFill (SF), Tetric EvoCeram Bulk-Fill (TEB), G-ænial U...

journal_title：Dental materials journal

authors： El-Shamy H,Sonbul H,Alturkestani N,Tashkandi A,Loomans BA,Dörfer C,El-Badrawy W

更新日期：2019-02-08 00:00:00

abstract：:Gold alloys with Cu contents of 10 mass%, 20%, and 30% were used for morphological observation of porous surface structures after heating at 800 degrees C in air followed by pickling with acid solution. With increasing Cu content in the gold alloy, the internal oxidation zone became well-developed in the alloy matrix....

journal_title：Dental materials journal

authors： Ohno H,Endo K,Haneda K,Tamura M,Hikita K

更新日期：2005-12-01 00:00:00

abstract：:This study evaluated the biomineralization and dentinal tubules occlusion abilities of the carboxyl-terminated polyamidoamine dendrimer (PAMAM-COOH) on human demineralized dentin in vivo at different time points. Demineralization dentin model with and without treated with PAMAM-COOH were sutured to the interior side o...

journal_title：Dental materials journal

authors： Xie F,Wei X,Li Q,Zhou T

更新日期：2016-01-01 00:00:00

abstract：:This study evaluated the polymerization shrinkage, flexural and compressive properties of low-shrinkage resin composites. For the study, four methacrylate-based and one silorane-based resin composites were light cured using three different light-curing units (LCUs) and their polymerization shrinkage, flexural (strengt...

journal_title：Dental materials journal

authors： Park JK,Lee GH,Kim JH,Park MG,Ko CC,Kim HI,Kwon YH

更新日期：2014-01-01 00:00:00

abstract：:This study examined the surface microhardness of four kinds of resin composites with different fillers and resin matrices. Ten specimens of 2 mm thickness and 4 mm diameter of each resin composite were polymerized using a halogen light, a blue light-emitted diode, and a plasma arc unit. Microhardness evaluation was pe...

journal_title：Dental materials journal

authors： Hubbezoğlu I,Bolayir G,Doğan OM,Doğan A,Ozer A,Bek B

更新日期：2007-11-01 00:00:00

abstract：:The purpose of this study was to characterize the surface damages of zirconia by Nd:YAG dental laser irradiation through a systematic evaluation of the associated microstructural changes. Disk specimens of yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) and ceria-stabilized zirconia/alumina nanocomposite (C...

journal_title：Dental materials journal

authors： Noda M,Okuda Y,Tsuruki J,Minesaki Y,Takenouchi Y,Ban S

更新日期：2010-10-01 00:00:00

abstract：:Initial attachment of human oral keratinocytes (HOKs) cultured on mirror-surfaced commercially pure titanium (Ti) or yttria-stabilized tetragonal zirconia polycrystals (TZP) was investigated. Numbers of viable attached HOKs, their mRNAs and proteins expression of laminin γ2 and integrin β4 were evaluated using the WST...

journal_title：Dental materials journal

authors： Kimura Y,Matsuzaka K,Yoshinari M,Inoue T

更新日期：2012-01-01 00:00:00

abstract：:The objective of this study was to clarify the effect of surface topography on osteoblast-like cell behavior on yttria stabilized tetragonal zirconia polycrystals (TZP). Mirror-polished; blasted with 50- or 150-µm alumina (SB50 and SB150); and SB150 acid-etched with hydrofluoric acid (SB150E) were prepared on TZP. Ini...

journal_title：Dental materials journal

authors： Ito H,Sasaki H,Saito K,Honma S,Yajima Y,Yoshinari M

更新日期：2013-01-01 00:00:00

abstract：:This study aimed to evaluate the effect of an acidic-adjusted pH of solvent in silanization on the amount of fluoride released and mechanical properties of heat-cured acrylic resin containing a silanized fluoride-releasing filler. The experimental groups were divided into 4 groups; non-silanized, acidic-adjusted pH, n...

journal_title：Dental materials journal

authors： Nakornchai N,Arksornnukit M,Kamonkhantikul K,Takahashi H

更新日期：2016-01-01 00:00:00

abstract：:The blending effect (BE) plays an important role in esthetics of the composite resin. The objective of this study was to determine the extents to which filler size and content affect the BE. Three types of fillers (0.7, 1.0, and 1.5 µm) were mixed at weight contents of 60, 70, 75, and 80%. This study simulated clinica...

journal_title：Dental materials journal

authors： Suh YR,Ahn JS,Ju SW,Kim KM

更新日期：2017-01-31 00:00:00

abstract：:The aim of this study was to evaluate the trial Teaching Robot for the development of a contact-type measuring apparatus for using directly in the oral cavity. A standard model was used to mimic the dentition by placing an arrangement of three bearing balls. The diameters of the balls were measured. A practical dentit...

journal_title：Dental materials journal

authors： Maikuma Y,Usui K,Araki K,Mataki S,Kurosaki N,Furuya N

更新日期：2003-06-01 00:00:00

abstract：:The secretion of collagen by osteoblasts was observed by scanning electron microscopy (SEM). Osteoblast-like cells were cultured on a CO3apatite-collagen sponge reinforced with a porous HAp frame. After three days' incubation, a number of newly created matrix fibrils, forming a network structure, were observed at the ...

journal_title：Dental materials journal

authors： Hirata I,Nomura Y,Tabata H,Miake Y,Yanagisawa T,Okazaki M

更新日期：2005-09-01 00:00:00

abstract：:The purpose of this study was to clarify the effect of silver nanoparticles on the behavior of subcritical crack growth (SCG) in dental porcelains. Prior to occurrence of fast fracture in dental porcelains, SCG occurs and leads to strength degradation over time. SCG in dental porcelains can be characterized by the str...

journal_title：Dental materials journal

authors： Fujieda T,Uno M,Ishigami H,Kurachi M,Kamemizu H,Wakamatsu N,Doi Y

更新日期：2013-01-01 00:00:00

abstract：:The effects of monomer structure on the mechanical properties of visible light-cured composite resins based on the seven types of aromatic dimethacrylates were investigated. The results of this study suggested that the mechanical properties of the composite resins were dependent upon the chemical structure of the dime...

journal_title：Dental materials journal

authors： Kawaguchi M,Fukushima T,Horibe T

更新日期：1989-06-01 00:00:00

abstract：:The purpose of this study was to investigate the effect of modifying aluminum oxide slips with magnesium oxide (MgO) to create a jointing material for In-Ceram Alumina. Jointed In-Ceram Alumina bars with In-Ceram Alumina slips containing 0-1.0 mass% MgO were examined by a three-point bending test. Joint-free bars were...

journal_title：Dental materials journal

authors： Odatsu T,Sawase T,Kamada K,Taira Y,Shiraishi T,Atsuta M

更新日期：2008-03-01 00:00:00

abstract：:Although titanium has been widely used in prosthetic appliances, such as cast removable partial denture frameworks, high quality castings are still difficult to obtain. This study proposes a new partition technique using a metal foil for improving castability of a two-chamber pressure casting unit. The metal foil was ...

journal_title：Dental materials journal

authors： Watanabe K,Okawa S,Kanatani M,Nakano S,Miyakawa O,Kobayashi M

更新日期：2000-09-01 00:00:00

abstract：:The aim of this study was to evaluate the effect of resin infiltration on root caries induced by Streptococcus mutans biofilms. Human premolar specimens were divided to 5 groups: negative control (NC), Clearfil SE Bond (SEB), Icon-etch120s+Icon-infiltrant (HA120), Icon-etch10s+Icon-infiltrant (HA10) and K-etchant10s+I...

journal_title：Dental materials journal

authors： Zhou Y,Matin K,Shimada Y,Sumi Y,Tagami J

更新日期：2017-03-31 00:00:00