Improving biocompatibility of zirconia surface by incorporating Ca ions.

abstract：:Application of a light-cured porcelain margin is a technique which has been developed recently. In this study, we compared the porcelain margin properties of the porcelain-light-cured resin matrix system and the traditional porcelain-water system, in terms of volumetric shrinkage, density, compressive strength, surfac...

journal_title：Dental materials journal

authors： Lu YS,Yang HW

更新日期：1995-06-01 00:00:00

abstract：:The objective of this study is to develop a casting investment that prevents the blackening of the cast surface of noble metal alloys. The experimental investments were prepared using a gypsum-bonded investment in which the metallic powders such as boron (B), silicon (Si), aluminum (Al) and titanium (Ti) were added as...

journal_title：Dental materials journal

authors： Kakuta K,Nakai A,Goto S,Wakamatsu Y,Yara A,Miyagawa Y,Ogura H

更新日期：2003-03-01 00:00:00

abstract：:Effects of functionally gradient calcium phosphate consisting of hydroxyapatite (HAP) and alpha-tricalcium phosphate (alpha-TCP) on proliferation and differentiation of osteoblasts were evaluated using MC3T3-E1 cells. There were no significant differences in the proliferation of MC3T3-E1 cells among HAP-alpha-TCP func...

journal_title：Dental materials journal

authors： Yuasa T,Miyamoto Y,Kon M,Ishikawa K,Takechi M,Momota Y,Tatehara S,Takano H,Mimamiguchi S,Nagayama M

更新日期：2005-06-01 00:00:00

abstract：:The aim of this in vitro study was to evaluate the effects of desensitizer pre-treatment on in-office bleaching using an artificial discoloration tooth model. The stained specimens were divided into four groups (n=10); without application (Control group), Shield Force plus (SF group), UltraEz (UE group) and Teeth Mate...

journal_title：Dental materials journal

authors： Kyaw KY,Otsuki M,Hiraishi N,Segarra MS,Tagami J

更新日期：2019-10-02 00:00:00

abstract：:This study aimed to evaluate the effect of sulfinic acid sodium salt interposition after acid and sodium hypochlorite treatment (NC treatment) on dentin bonding durability using a mild type one-step self-etching adhesive. Fifteen human third molars were randomly assigned into three experimental groups according to den...

journal_title：Dental materials journal

authors： Nakatani H,Mine A,Matsumoto M,Kabetani T,Kawaguchi-Uemura A,Higashi M,Tajiri Y,Imai D,Hagino R,Minamino T,Miura J,Yatani H

更新日期：2017-11-29 00:00:00

abstract：:This in vitro study aimed to evaluate the effect of two different polymer-based CAD/CAM materials; resin-nano ceramic (Lava Ultimate [LVU]) and composite (CERASMART [CS]), their different surface pre-treatments, and use of different resin cements on the µTBS of adhesively bonded CAD/CAM onlays to dentin. CAD/CAM mater...

journal_title：Dental materials journal

authors： Capa N,Say EC,Celebi C,Casur A

更新日期：2019-02-08 00:00:00

abstract：:The aim of this study was to evaluate temperature changes in the pulp chamber during polymerization of four different pulp-capping materials using a LED-light-curing-unit in the contact and noncontact positions. A pulpal circulation mechanism was simulated to measure increases in temperature in four pulp-capping mater...

journal_title：Dental materials journal

authors： Savas S,Botsali MS,Kucukyilmaz E,Sari T

更新日期：2014-01-01 00:00:00

abstract：:This study evaluated the effects of ceramic surface treatment agents on shear bond strengths to ceramic materials with and without thermocycling. Ceramic plates were prepared from feldspathic ceramic; AAA, lithium disilicate ceramic material; IPS e.max Press, zirconia ceramic; Lava. Ceramic surfaces were pretreated wi...

journal_title：Dental materials journal

authors： Noda Y,Nakajima M,Takahashi M,Mamanee T,Hosaka K,Takagaki T,Ikeda M,Foxton RM,Tagami J

更新日期：2017-11-29 00:00:00

abstract：:This study was designed to evaluate the cytotoxicity of four dentin bonding agents and the effects of an antioxidant addition. Group A: G-aenial Bond, Group B: Optibond All in One, Group C: Gluma Self Etch and Group D: Clearfil S(3) Bond were added to the medium using extract method. The cells were cultured with or wi...

journal_title：Dental materials journal

authors： Atalayin C,Armagan G,Konyalioglu S,Kemaloglu H,Tezel H,Ergucu Z,Keser A,Dagci T,Onal B

更新日期：2015-01-01 00:00:00

abstract：:We examined the mold filling capacity and microhardness of two industrial 1% Fe titanium alloys: Super-TIX800 (Nippon Steel Corp.) (Fe: 0.910%, O: 0.370%, N: 0.005%) and Super-TIX800N (Nippon Steel Corp.) (Fe: 0.960%, O: 0.300%, N: 0.041%). Two wedge-shaped acrylic patterns (with 30 degrees or 15 degrees angles) were ...

journal_title：Dental materials journal

authors： Sato H,Komatsu M,Miller B,Shimizu H,Fujii H,Okabe T

更新日期：2004-06-01 00:00:00

abstract：:Comparative studies on two-body sliding wear resistance were performed between a hybrid composite resin and conventional light-curing composite veneering materials. This study investigated the wear resistance of hybrid composite resins compared with three composite resin veneering materials for 12%Au-Ag-Pd alloy, the ...

journal_title：Dental materials journal

authors： Suese K,Kawazoe T

更新日期：2002-09-01 00:00:00

abstract：:The study evaluated changes in total enzymatic activity and degradation of demineralized dentin following the application of universal or self-etch adhesives. The universal adhesives -Scotchbond Universal (SU) and All-Bond Universal (ABU) and self-etch adhesives -Adper Easy Bond (EB) and G-aenial Bond (GB) were used f...

journal_title：Dental materials journal

authors： Ahmet BSO,Seseogullari-Dirihan R,Tezvergil-Mutluay A

更新日期：2020-12-03 00:00:00

abstract：:The reinforcement mechanism of dentin mechanical properties by intracanal medicaments was investigated. The dumbbell-shaped specimens were prepared from a collagen sheet, demineralized dentin and organic dissolved dentin. After immersing the specimens in intracanal medicaments (eugenol and formocresol), the tensile te...

journal_title：Dental materials journal

authors： Nakano F,Takahashi H,Nishimura F

更新日期：1999-09-01 00:00:00

abstract：:The present study investigated the influences of a denture strengthener on the deformation of a maxillary complete denture. Three groups of maxillary complete dentures were fabricated (Group 1 without a strengthener; Group 2 with a Co-Cr alloy wire strengthener; Group 3 with an experimental fiberglass strengthener). T...

journal_title：Dental materials journal

authors： Hirajima Y,Takahashi H,Minakuchi S

更新日期：2009-07-01 00:00:00

abstract：:The human antimicrobial peptide beta-defensin-2 (hBD2) shows broad antibacterial activity and infrequent bacterial resistance. Here mesoporous bioactive glass (MBG) was loaded with hBD2, forming hBD2-loaded MBG (BD-MBG). The antibacterial and osteogenic effects of BD-MBG were investigated in comparison with MBG and th...

journal_title：Dental materials journal

authors： Ren L,Zhang Z,Deng C,Zhang N,Li D

更新日期：2020-12-24 00:00:00

abstract：:To determine new developed light curing units with shorter curing times effects on microleakage and microhardness values for resin fissure sealants. Resin filled sealant (UltraSeal-XT), resin unfilled sealant (Delton Type-II) and ormocer-based sealant (Admira-Seal) were light cured with a quartz-tungsten-halogen (QTH)...

journal_title：Dental materials journal

authors： Bani M,Tirali RE

更新日期：2016-01-01 00:00:00

abstract：:Multi-purpose bonding performance of three kinds of newly synthesized phosphonic acid monomers was investigated. Methacryloxyalkyl or acryloxyalkyl phosphonoacetates of 6-MHPA, 6-AHPA, 10-MDPA were synthesized in 42.8-51.9% yields with a light yellow viscous liquid, and identified as new compounds by 1H NMR, IR, and e...

journal_title：Dental materials journal

authors： Ikemura K,Tay FR,Nishiyama N,Pashley DH,Endo T

更新日期：2007-01-01 00:00:00

abstract：:This study aimed to determine the influence of sodium hypochlorite (NaOCl) contamination on the microhardness of build-up composites. Fifty-two samples, from each of three build-up materials (LuxaCore Dual, MultiCore flow and Rebilda DC) were prepared. Half of the samples from each material were stored in physiologic ...

journal_title：Dental materials journal

authors： Wegehaupt FJ,Betschart J,Attin T

更新日期：2010-08-01 00:00:00

abstract：:We aimed to establish an experimental animal model to evaluate materials for endodontic therapy. We focused on the biocompatibility of new paste-type zinc oxide-eugenol (ZOE) sealer. The results of this sealer were compared with those of conventional powder/liquid ZOE and eugenol-free sealers. The molars of Wistar rat...

journal_title：Dental materials journal

authors： Mutoh N,Tani-Ishii N

更新日期：2011-01-01 00:00:00

abstract：:Enamel and dentin particles were added to an experimental 10-methacryloyloxydecyl dihydrogen phosphate (MDP)-based one-step adhesive to react for 30 s. After enamel and dentin reactants were analyzed using X-ray diffraction (XRD) and phosphorus-31 nuclear magnetic resonance ((31)P NMR) techniques, curve-fitting analys...

journal_title：Dental materials journal

authors： Yokota Y,Nishiyama N

更新日期：2015-01-01 00:00:00

abstract：:The purpose of this study was to investigate the effect of modifying aluminum oxide slips with magnesium oxide (MgO) to create a jointing material for In-Ceram Alumina. Jointed In-Ceram Alumina bars with In-Ceram Alumina slips containing 0-1.0 mass% MgO were examined by a three-point bending test. Joint-free bars were...

journal_title：Dental materials journal

authors： Odatsu T,Sawase T,Kamada K,Taira Y,Shiraishi T,Atsuta M

更新日期：2008-03-01 00:00:00

abstract：:Gold alloys with Cu contents of 10 mass%, 20%, and 30% were used for morphological observation of porous surface structures after heating at 800 degrees C in air followed by pickling with acid solution. With increasing Cu content in the gold alloy, the internal oxidation zone became well-developed in the alloy matrix....

journal_title：Dental materials journal

authors： Ohno H,Endo K,Haneda K,Tamura M,Hikita K

更新日期：2005-12-01 00:00:00

abstract：:The physical properties of experimental visible light-activated resins containing dyestuff, which could be quickly discolored by irradiation was, evaluated by analyzing light absorbance characteristics and measuring micro Vickers hardness. The experimental resin, which was prepared by mixing equivalent weights of Bis ...

journal_title：Dental materials journal

authors： Nakazato J,Itoh K,Wakumoto S

更新日期：1989-12-01 00:00:00

abstract：:The purpose of present investigation was to compare the cyto-genotoxicity induced by five dental alloys in vitro. The cyto-genotoxicity induced by five dental alloy extracts on human B lymphoblast cells was assessed with neutral red uptake (NRU) , CCK-8, comet and micronucleus (CBMN) assays in vitro, respectively. The...

journal_title：Dental materials journal

authors： Zhihong C,Yezhen L,Zhiyuan G,Zhongqiao Y,Xiaoxue L,Yifeng R,Weikun F,Jiliang H

更新日期：2011-01-01 00:00:00

abstract：:This study was carried out to investigate the influences of elastic moduli of the dowel-core combination on the stress distribution in the root by the use of 2-dimensional finite element analysis. The peak stress at the dowel-cement interface was influenced strongly by a change of elastic modulus of the post (from 20,...

journal_title：Dental materials journal

authors： Ukon S,Moroi H,Okimoto K,Fujita M,Ishikawa M,Terada Y,Satoh H

更新日期：2000-03-01 00:00:00

abstract：:We evaluated the effect of different curing strategies for universal adhesives on micro-tensile bond strength (μTBS) between resin cement and dentin and/or between resin cement and indirect resin composite. Flat coronal dentin surfaces and composite resin disks were pretreated with silane-containing universal adhesive...

journal_title：Dental materials journal

authors： Araoka D,Hosaka K,Nakajima M,Foxton R,Thanatvarakorn O,Prasansuttiporn T,Chiba A,Sato K,Takahashi M,Otsuki M,Tagami J

更新日期：2018-06-08 00:00:00

abstract：:The aim of this investigation was to evaluate the metal-ceramic bonding of Au-1.6 wt% Ti alloy. Therefore, the coefficient of thermal expansion, modulus of elasticity, ceramic bonding strength, and hardness of Au-1.6 wt% Ti alloy were measured. The metal-ceramic interface was observed by EPMA to investigate its bondin...

journal_title：Dental materials journal

authors： Ito M,Kikuchi M,Okuno O,Kimura K

更新日期：2005-06-01 00:00:00

abstract：:The microstructure and homogeneity of three commercial dentin and incisal unfired porcelain frits (one conventional and two ultra-low fusing types, fused-to metal were analyzed by X-ray diffractometry, scanning electron microspectroscopy, and wavelength- and energy dispersive X-ray microspectroscopy. The average conte...

journal_title：Dental materials journal

authors： Ban S,Matsuo K,Mizutani N,Iwase H,Kani T,Hasegawa J

更新日期：1998-12-01 00:00:00

abstract：:This study evaluated the polymerization shrinkage, flexural and compressive properties of low-shrinkage resin composites. For the study, four methacrylate-based and one silorane-based resin composites were light cured using three different light-curing units (LCUs) and their polymerization shrinkage, flexural (strengt...

journal_title：Dental materials journal

authors： Park JK,Lee GH,Kim JH,Park MG,Ko CC,Kim HI,Kwon YH

更新日期：2014-01-01 00:00:00

abstract：:Removable partial dentures (RPDs) with resin-clasp retentive parts, which are known as non-metal-clasp dentures (NMCDs), have been used as alternatives for conventional RPDs with metal clasp, in case of aesthetic prosthodontic treatments. In this study, a profilometer and dynamic micro-indentation tests were used to i...

journal_title：Dental materials journal

authors： Tanimoto Y,Nagakura M

更新日期：2018-11-30 00:00:00