Ultrasonic study of processed milk cream and vegetable oils.

abstract：:A potassium-doped synthetic apatite was prepared by soaking hydroxyapatite in potassium carbonate and potassium chloride solutions. The hydroxyapatite was prepared by firing slip cast ceramic bodies in vacuum at 1100 degrees C. The conical ceramic samples and a crushed material of this were soaked in carbonate and chl...

journal_title：Bio-medical materials and engineering

authors： Nordström EG,Karlsson KH

更新日期：1992-01-01 00:00:00

abstract：:In order to investigate the significance of hydroxyapatite based microporous composite (HA/mica composite) surfaces and a macroporous synthetic hydroxyapatite, rat marrow cell culture, which shows osteogenic differentiation, was carried out on six different culture substrata (two control culture dishes, two identical ...

journal_title：Bio-medical materials and engineering

authors： Nordström E,Ohgushi H,Yoshikawa T,Yokobori AT Jr,Yokobori T

更新日期：1999-01-01 00:00:00

abstract：:This paper presents the single channel speech enhancement system using subband Kalman filtering by estimating optimal Autoregressive (AR) coefficients and variance for speech and noise, using Weighted Linear Prediction (WLP) and Noise Weighting Function (NWF). The system is applied for normal and Oesophageal speech si...

journal_title：Bio-medical materials and engineering

authors： Ishaq R,García Zapirain B

更新日期：2014-01-01 00:00:00

abstract：:Modeling of thermal-induced mechanical behaviors of soft tissues is of great importance for thermal ablation. This paper presents a method by integrating the heating process with thermal-induced mechanical deformations of soft tissues for simulation and analysis of the thermal ablation process. This method combines bi...

journal_title：Bio-medical materials and engineering

authors： Li X,Zhong Y,Jazar R,Subic A

更新日期：2014-01-01 00:00:00

abstract：BACKGROUND:Adipose tissue engineering has been studied as an alternative to current options for breast reconstruction, such as lipofilling, flap reconstruction, and silicone implants. Previously, we demonstrated that a poly(L-lactic acid) mesh containing a collagen sponge, containing neither cells nor growth factors, c...

journal_title：Bio-medical materials and engineering

authors： Kambe Y,Ogino S,Yamanaka H,Morimoto N,Yamaoka T

更新日期：2020-01-01 00:00:00

abstract：:The interaction between implant materials and bone cells or oral epithelial (OE) cells contributes to the clinical success of dental implants. The functional activity of cells in contact with an implant is determined by its surface properties. Before cells attach, extracellular matrix (ECM) in the serum deposits on th...

journal_title：Bio-medical materials and engineering

authors： Goto T,Yoshinari M,Kobayashi S,Tanaka T

更新日期：2004-01-01 00:00:00

abstract：:Metal patch test is often used in clinical settings when metal-induced contact dermatitis is suspected. However, the transdermal permeation behavior of metal ions from the patch test remains unclear. Current patch tests using high concentrations of metal salt solutions have some side effects, e.g. acute skin reactions...

journal_title：Bio-medical materials and engineering

authors： Sugiyama T,Uo M,Wada T,Hongo T,Omagari D,Komiyama K,Oikawa M,Kusama M,Mori Y

更新日期：2015-01-01 00:00:00

abstract：:The finite element (FE) method has been widely used to investigate the mechanism of traumatic brain injuries (TBIs), because it is technically difficult to quantify the responses of the brain tissues to the impact in experiments. One of technical challenges to build a FE model of a human head is the modeling of the ce...

journal_title：Bio-medical materials and engineering

authors： Wu JZ,Pan CS,Wimer BM,Rosen CL

更新日期：2017-01-01 00:00:00

abstract：:Polycrystalline diamond (PCD) exhibits excellent abrasive characteristics and is commonly used as loose grains for precision machining of hard ceramics and other materials that are difficult to grind and polish. In the present study, we investigated using bonded PCD for polishing dental porcelain, for which a lustrous...

journal_title：Bio-medical materials and engineering

authors： Nakamura Y,Sato H,Ohtsuka M,Hojo S

更新日期：2010-01-01 00:00:00

abstract：BACKGROUND:Electrospinning is a highly effective method in order to generate nano-scaled fibers. In conventional electrospinning technique, geometry of nanofibers are mostly random due to the chaotic behavior of polymer jet. OBJECTIVE:Purpose of this study is to produce aligned nanofibers from PVP polymers with advanc...

journal_title：Bio-medical materials and engineering

authors： Karayeğen G,Koçum IC,Çökeli Ler Serdaroğlu D,Doğan M

更新日期：2018-01-01 00:00:00

abstract：:Previous literatures have indicated that hypothalamic paraventricular nucleus (PVN) neurons are important for regulating the level of sympathetic and vagal nervous activity. Sympathovagal balance is closely related to heart rate variability (HRV). However, it still requires further elucidation regarding the effect of ...

journal_title：Bio-medical materials and engineering

authors： Deng X,Feng X,Li S,Gao Y,Yu B,Li G

更新日期：2015-01-01 00:00:00

abstract：:The thrust of the present work is the demonstration of the feasibility of using an enzyme-linked immunosorbent assay (ELISA) for the detection and quantification of a monoclonal antibody human serum. The antibodies used, 7E3 and D3GP3, have been proposed as platelet receptor blockers, being directed specifically again...

journal_title：Bio-medical materials and engineering

authors： Lewis G

更新日期：1994-01-01 00:00:00

abstract：OBJECTIVE:Understanding the biomechanical properties of hernia meshes is essential in facilitating their selection. The aim of this study was to evaluate the mechanical compatibility of hernia meshes and human abdominal fascia and assess their applicability in hernia repair. METHODS:Uniaxial tensile tests were perform...

journal_title：Bio-medical materials and engineering

authors： Doneva M,Pashkouleva D

更新日期：2018-01-01 00:00:00

abstract：:Sunscreens that absorb UV light without photodegradation could reduce skin cancer. Polyvinyl silsesquioxanes are known to have greater thermal and photochemical stability than organic compounds, such as those in sunscreens. This paper evaluates the UV transparency of vinyl silsesquioxanes (VS) and its hybrids with SiO...

journal_title：Bio-medical materials and engineering

authors： Wang H,Lin D,Wang D,Hu L,Huang Y,Liu L,Loy DA

更新日期：2014-01-01 00:00:00

abstract：:Porous polyethylene (PP or Medpor) is an alloplastic material worldwide used for craniofacial reconstruction. Although several clinical studies are available, there is a lack as regard the genetic effects. Because PP is always fixed on bone and the mechanism by which PP acts on osteoblasts is unknown, we therefore att...

journal_title：Bio-medical materials and engineering

authors： Palmieri A,Pezzetti F,Brunelli G,Martinelli M,Scapoli L,Arlotti M,Masiero E,Carinci F

更新日期：2008-01-01 00:00:00

abstract：:A layer of L-glycine-molecule-imprinted polyaniline (LMIP-PANI) polymer film has been modified on a carbon fiber electrode for the determination of L-glycine standard samples and L-glycine in cerebrospinal fluid of wistar mice. It has been found that a linear relationship exists between current and concentration for t...

journal_title：Bio-medical materials and engineering

authors： Zeng H,Wang D,Yu J

更新日期：2014-01-01 00:00:00

abstract：:In order to explore the effects of hydrogen sulfide (H2S) on myocardial fibrosis in diabetic rats and its underlying mechanisms, intraperitoneal injections of streptozotocin were used to establish the diabetes models and sodium hydrosulfide (NaHS) was used as an exogenous donor of H2S. Eight weeks later, Van Gieson st...

journal_title：Bio-medical materials and engineering

authors： Xiao T,Zeng O,Luo J,Wu Z,Li F,Yang J

更新日期：2015-01-01 00:00:00

abstract：:Longitudinal stent compression (LSC) is a new failure mode not previously observed in coronary stents. This phenomenon occurs when the physician tries to cross the deployed stent with other devices. While this phenomenon has been observed with a number of stent designs, it seems more common with the Element stent. A c...

journal_title：Bio-medical materials and engineering

authors： Hsiao HM,Yeh CT,Chiu YH,Wang C,Chen CP

更新日期：2014-01-01 00:00:00

abstract：:This paper established the extracting method and algorithm for liposome images on the basis of analyzing the form feature of liposome, and its corresponding automatic analysis software. Some algorithms, such as the logical algorithms of mathematical morphology, the grayscale-gradient co-occurrence matrix-based method ...

journal_title：Bio-medical materials and engineering

authors： Haitao X,Kuanghu H,Wanfang S,Shuyu L,Desen S

更新日期：2002-01-01 00:00:00

abstract：UNLABELLED:It is suggested that nanophase hydroxyapatite (nHAP) might have advantages over conventional hydroxyapatite (cHAP) as a biomaterial for bone regeneration. To be a satisfactory candidate for bone tissue engineering, it is important to support the growth and differentiation of bone marrow-derived mesenchymal s...

journal_title：Bio-medical materials and engineering

authors： Zhou GS,Su ZY,Cai YR,Liu YK,Dai LC,Tang RK,Zhang M

更新日期：2007-01-01 00:00:00

abstract：:The fretting corrosion of five materials for implant suprastructures (cast-titanium, machined-titanium, gold alloy, silver-palladium alloy and chromium-nickel alloy), was investigated in vitro, the materials being galvanically coupled to a titanium ball-and-socket-joint with tetrafluoroethylene under mechanical load. ...

journal_title：Bio-medical materials and engineering

authors： Gil FJ,Canedo R,Padrós A,Bañeres MV,Arano JM

更新日期：2003-01-01 00:00:00

abstract：:The stability of the Co-Cr-Mo dental alloy immersed in artificial salivas (pH 6.7) was investigated over 24 h. Three artificial salivas have been studied: saline saliva (saliva I); saline saliva buffered with phosphate ions (saliva II) and saliva II plus mucin molecules (saliva III). For all the systems, open circuit ...

journal_title：Bio-medical materials and engineering

authors： de Aguiar SR,Nicolai M,Almeida M,Gomes A

更新日期：2015-01-01 00:00:00

abstract：:A number of materials have been considered as sources of grafts to repair bone defects. Here, we examined the possibility of creating in situ-forming gels from sodium carboxymethylcellulose (CMC) and poly(ethyleneimine) (PEI) for use as an in vivo carrier of demineralized bone matrix (DBM). The interaction between ani...

journal_title：Bio-medical materials and engineering

authors： Kim KS,Kang YM,Lee JY,Kim ES,Kim CH,Min BH,Lee HB,Kim JH,Kim MS

更新日期：2009-01-01 00:00:00

abstract：:Some computer applications for cell characterization in medicine and biology, such as analysis of surface structure of cell wall-deficient EVC (El Tor Vibrio of Cholera), operate with cell samples taken from very small areas of interest. In order to perform texture characterization in such an application, only a few t...

journal_title：Bio-medical materials and engineering

authors： Li S,Hu K,Cai N,Su W,Xiong H,Lou Z,Lin T,Hu Y

更新日期：2001-01-01 00:00:00

abstract：:A multidirectional pin-on-plate reciprocating machine was used to compare the wear performance of UHMWPE sliding against cast cobalt chrome (CoCr) plates that were either untreated or coated with Amorphous Diamond Like Carbon (ADLC). The test conditions were based on a 1/5 scale model representative of in vivo motion ...

journal_title：Bio-medical materials and engineering

authors： Jones VC,Barton DC,Auger DD,Hardaker C,Stone MH,Fisher J

更新日期：2001-01-01 00:00:00

abstract：:As an injectable scaffold material for bone tissue engineering, calcium phosphate cement (CPC) has good biocompatibility, self-setting, and osteoconduction properties. Alginate-microencapsulated seed cells can pick up the degradation speed and bioactivity of CPC. The aim of this study was to explore the osteogenic abi...

journal_title：Bio-medical materials and engineering

authors： Wang J,Qiao P,Dong L,Li F,Xu T,Xie Q

更新日期：2014-01-01 00:00:00

abstract：:A robust method for inducing bone-formation without an autograft has not been established. Currently, both platelet-rich plasma (PRP) and bone morphogenetic protein (BMP) have been widely investigated for their clinical use in such cases. However, their synergistic effect is still controversial and previously shown di...

journal_title：Bio-medical materials and engineering

authors： Yoshida K,Sumita Y,Marukawa E,Harashima M,Asahina I

更新日期：2013-01-01 00:00:00

abstract：BACKGROUND:The simulated Doppler blood flow signals are widely used to assess the performance of the clutter filters for removing wall components while reserving low-velocity signals scattered from physiological blood flow approaching the inner vessel-wall injured by a stenosed lesion. OBJECTIVE:By simultaneously taki...

journal_title：Bio-medical materials and engineering

authors： Gao L,Zhang Y,Zhou Y,Hu X,Deng L,Zhang K,Cai G,Zhang J

更新日期：2016-08-12 00:00:00

abstract：:This paper explores mouse kidney imaging with diffraction enhanced imaging (DEI) and inline outline X-ray imaging (IOXI) technology, and evaluates latent value of kidney imaging with phase contrast imaging technology. In our experiment, spatial resolution and tissue contrast serve as element evaluation and comparison....

journal_title：Bio-medical materials and engineering

authors： Xia C,Peng YF,Arun KY,Xiao T,Zhu P,He W

更新日期：2014-01-01 00:00:00

abstract：:In this study, a computer-aided detection (CAD) system was developed for the detection of lung nodules in computed tomography images. The CAD system consists of four phases, including two-dimensional and three-dimensional preprocessing phases. In the feature extraction phase, four different groups of features are extr...

journal_title：Bio-medical materials and engineering

authors： Demir Ö,Yılmaz Çamurcu A

更新日期：2015-01-01 00:00:00