Cancer therapy and fluorescence imaging using the active release of doxorubicin from MSPs/Ni-LDH folate targeting nanoparticles.

Abstract:

:Hierarchical structured nanomaterials with diverse functionality, such as magnetic susceptibility, stimuli-responsiveness, environmental sensing and biocompatibility, are highly sought after for biomedicine and biodetection alike. In this study, we designed and fabricated a new kind of multifunctional core/shell nanospheres as biodegradable targeted drug carriers, the controlled drug release progress and therapeutic effect were monitored in-situ by the fluorescent state of the cells. Firstly, the core/shell nanospheres with biodegradability were synthesized using magnetic supraparticles (MSPs) as core and the layered double hydroxide (LDH) as shell via a hydrothermal route, the reaction parameters were well investigated to obtain the desired structure of the LDH shell. The anti-cancer drug doxorubicin was modified with carboxyl group (DOX-COOH) and loaded in the shell of MSPs/LDH nanospheres via an anion-exchange intercalation. To endow the nanospheres with tumor-targeting capability, IDA (iminodiacetic acid)-modified folate was successfully immobilized onto the surface of LDH shell using chelating interaction. These nanospheres behaved as multifunctional carriers for targeted delivery of anti-cancer drug, doxorubicin (DOX), within Hela cells and thus, these nano-drugs exhibited clear cytotoxicity and inhibition toward Hela cells as compared to normal cell-lines of HEK 293T cells. Interestingly, after the internalization of these nano-drugs, there was a sharp contrast in illumination between the tumorous Hela cells and the normal HEK 293T cells, the acidic cytoplasm of Hela cell stimulated DOX-COOH in LDH shell quickly degraded into positive-charged DOX, and then rapidly escaped from the positive-charged intercalation of LDH shell by strong repulsive interaction, the released DOX rapidly lit up the whole tumor cells in a short time, but only very weak light was found in HEK 293T cells.

journal_name

Biomaterials

journal_title

Biomaterials

authors

Li D,Zhang YT,Yu M,Guo J,Chaudhary D,Wang CC

doi

10.1016/j.biomaterials.2013.06.046

subject

Has Abstract

pub_date

2013-10-01 00:00:00

pages

7913-22

issue

32

eissn

0142-9612

issn

1878-5905

pii

S0142-9612(13)00761-8

journal_volume

34

pub_type

杂志文章
  • Thermosensitive hydrogels based on polypeptides for localized and sustained delivery of anticancer drugs.

    abstract::Thermosensitive hydrogels based on poly(γ-ethyl-L-glutamate)-poly(ethylene glycol)-poly(γ-ethyl-L-glutamate) triblock copolymers (PELG-PEG-PELG) were prepared for localized and sustained delivery of anticancer drugs. The polypeptide-based hydrogels showed much lower critical gelation concentration than the traditional...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2013.09.064

    authors: Cheng Y,He C,Ding J,Xiao C,Zhuang X,Chen X

    更新日期:2013-12-01 00:00:00

  • Osteogenesis potential of different titania nanotubes in oxidative stress microenvironment.

    abstract::Oxidative stress is commonly existed in bone degenerative disease (osteoarthritis, osteoporosis etc.) and some antioxidants had great potential to enhance osteogenesis. In this study, we aim to investigate the anti-oxidative properties of various TiO2 nanotubes (TNTs) so to screen the desirable size for improved osteo...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2018.03.024

    authors: Yu Y,Shen X,Luo Z,Hu Y,Li M,Ma P,Ran Q,Dai L,He Y,Cai K

    更新日期:2018-06-01 00:00:00

  • Macrophage responses to silk.

    abstract::Silk fibers have potential biomedical applications beyond their traditional use as sutures. The physical properties of silk fibers and films make it a promising candidate for tissue engineering scaffold applications, particularly where high mechanical loads or tensile forces are applied or in cases where low rates of ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(03)00158-3

    authors: Panilaitis B,Altman GH,Chen J,Jin HJ,Karageorgiou V,Kaplan DL

    更新日期:2003-08-01 00:00:00

  • Self-initiated surface grafting with poly(2-methacryloyloxyethyl phosphorylcholine) on poly(ether-ether-ketone).

    abstract::Poly(ether-ether-ketone) (PEEK)s are a group of polymeric biomaterials with excellent mechanical properties and chemical stability. In the present study, we demonstrate the fabrication of an antibiofouling and highly hydrophilic high-density nanometer-scaled layer on the surface of PEEK by photo-induced graft polymeri...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2009.10.055

    authors: Kyomoto M,Moro T,Takatori Y,Kawaguchi H,Nakamura K,Ishihara K

    更新日期:2010-02-01 00:00:00

  • Adsorption and dissolution behavior of human plasma fibronectin on thermally and chemically modified titanium dioxide particles.

    abstract::Titanium is known for its biocompatibility and is widely used in dental and orthopedic reconstructive surgery. There are reports that osteointegration of these implants is not optimal. The objective of this study was to modify titanium dioxide particles and examine the resultant effects on protein adsorption to these ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(01)00317-9

    authors: MacDonald DE,Deo N,Markovic B,Stranick M,Somasundaran P

    更新日期:2002-02-01 00:00:00

  • Deterioration mechanisms of joint prosthesis materials. Several solutions by ion implantation surface treatments.

    abstract::Materials for orthopaedic implants can fail for several combined reasons: corrosion, fatigue and wear for metals, wear and creep for polymers, fracture for ceramics. Some typical cases are analysed and it is demonstrated that ion implantation improves metals and polymers used for joint prosthesis. Implantations of nit...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:

    authors: Rieu J,Pichat A,Rabbe LM,Chabrol C,Robelet M

    更新日期:1990-07-01 00:00:00

  • Creating polymer hydrogel microfibres with internal alignment via electrical and mechanical stretching.

    abstract::Hydrogels have been widely used for 3-dimensional (3D) cell culture and tissue regeneration due to their tunable biochemical and physicochemical properties as well as their high water content, which resembles the aqueous microenvironment of the natural extracellular matrix. While many properties of natural hydrogel ma...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2013.12.081

    authors: Zhang S,Liu X,Barreto-Ortiz SF,Yu Y,Ginn BP,DeSantis NA,Hutton DL,Grayson WL,Cui FZ,Korgel BA,Gerecht S,Mao HQ

    更新日期:2014-03-01 00:00:00

  • Water-soluble superparamagnetic manganese ferrite nanoparticles for magnetic resonance imaging.

    abstract::We report here a thermal decomposition approach to the synthesis of water-soluble superparamagnetic manganese ferrite (MnFe(2)O(4)) nanoparticles (NPs) for magnetic resonance (MR) imaging applications. In this approach, tetraethylene glycol was utilized as a coordination and stabilization agent, rendering the NPs wate...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2010.01.055

    authors: Yang H,Zhang C,Shi X,Hu H,Du X,Fang Y,Ma Y,Wu H,Yang S

    更新日期:2010-05-01 00:00:00

  • A customizable microfluidic platform for medium-throughput modeling of neuromuscular circuits.

    abstract::Neuromuscular circuits (NMCs) are vital for voluntary movement, and effective models of NMCs are needed to understand the pathogenesis of, as well as to identify effective treatments for, multiple diseases, including Duchenne's muscular dystrophy and amyotrophic lateral sclerosis. Microfluidics are ideal for recapitul...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2019.119537

    authors: Bellmann J,Goswami RY,Girardo S,Rein N,Hosseinzadeh Z,Hicks MR,Busskamp V,Pyle AD,Werner C,Sterneckert J

    更新日期:2019-12-01 00:00:00

  • Characterization of a hyaluronic acid-Arg-Gly-Asp peptide cell attachment matrix.

    abstract::We have developed a method to modify cross-linked hyaluronic acid with peptides containing the Arg-Gly-Asp sequence. The material created by this process is a three-dimensional porous matrix capable of supporting integrin receptor-mediated cell attachment. Peptide density can be controlled by varying the reaction cond...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(96)85911-4

    authors: Glass JR,Dickerson KT,Stecker K,Polarek JW

    更新日期:1996-06-01 00:00:00

  • Production, safety and antitumor efficacy of recombinant Oncofetal Antigen/immature laminin receptor protein.

    abstract::We describe here for the first time an efficient high yield production method for clinical grade recombinant human Oncofetal Antigen/immature laminin receptor protein (OFA/iLRP). We also demonstrate significant antitumor activity for this protein when administered in liposomal delivery form in a murine model of syngen...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2009.02.022

    authors: Barsoum AL,Liu B,Rohrer JW,Coggin JH Jr,Tucker JA,Pannell LK,Schwarzenberger PO

    更新日期:2009-06-01 00:00:00

  • Immobilization of human thrombomodulin onto poly(ether urethane urea) for developing antithrombogenic blood-contacting materials.

    abstract::Thrombomodulin (TM) is a newly described endothelial cell-associated protein that functions as a potent natural anticoagulant by converting thrombin from a procoagulant protease to an anticoagulant. In this study, focussing on the application of TM for biomedical materials, recombinant human TM (hTM) was immobilized o...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(94)90041-8

    authors: Kishida A,Ueno Y,Fukudome N,Yashima E,Maruyama I,Akashi M

    更新日期:1994-08-01 00:00:00

  • Protein binding properties of surface-modified porous polyethylene membranes.

    abstract::In this study, we quantified the adsorption of immunoglobulin G (IgG) protein onto several polyelectrolyte-modified sintered porous polyethylene (PPE) membranes. The polymer surfaces had both cationic and anionic charges obtained via the adsorption of polyethylenimine (PEI) and polyacrylic acid (PAA), respectively, on...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2005.03.025

    authors: Greene G,Radhakrishna H,Tannenbaum R

    更新日期:2005-10-01 00:00:00

  • In vitro evaluation of the mutagenic and carcinogenic power of high purity zirconia ceramic.

    abstract::Tetragonal zirconia polycrystal (TZP) is a new interesting ceramic for the manufacture of medical devices. Its wide use in orthopedic and odontoiatric implants was limited till now by the high chemical and radiochemical impurities of the raw materials. Purification processes now available allow to obtain high purity c...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(98)00182-3

    authors: Covacci V,Bruzzese N,Maccauro G,Andreassi C,Ricci GA,Piconi C,Marmo E,Burger W,Cittadini A

    更新日期:1999-02-01 00:00:00

  • The role of miR-135-modified adipose-derived mesenchymal stem cells in bone regeneration.

    abstract::Tissue-engineering technology employing genetically-modified mesenchymal stem cells combined with proper scaffolds represents a promising strategy for bone regeneration. Elucidating the underlying mechanisms that govern the osteogenesis of mesenchymal stem cells will give deeper insights into the regulatory patterns, ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2015.10.042

    authors: Xie Q,Wang Z,Zhou H,Yu Z,Huang Y,Sun H,Bi X,Wang Y,Shi W,Gu P,Fan X

    更新日期:2016-01-01 00:00:00

  • Tailoring lactide/caprolactone co-oligomers as tissue adhesives.

    abstract::This article introduces novel biocompatible tissue adhesives that do not involve any chemical or biochemical reactions, during their application in vivo. The use of these new adhesives is based exclusively on their temperature-dependent rheological properties. Since biocompatibility and biodegradability are additional...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2004.01.040

    authors: Cohn D,Lando G

    更新日期:2004-12-01 00:00:00

  • Re-freeze dried bilayer artificial skin.

    abstract::A bilayer artificial skin composed of a silicone sheet and a collagen sponge sheet was developed by us in 1986, modifying Yannas and Burke's technique. It was used in experimental animals and clinically, both with success; but the artificial skin was inconvenient for clinical use in terms of disinfection and preservat...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(93)90197-a

    authors: Matsuda K,Suzuki S,Isshiki N,Ikada Y

    更新日期:1993-10-01 00:00:00

  • Development and characterisation of molecularly imprinted polymers based on methacrylic acid for selective recognition of drugs.

    abstract::Specific molecularly imprinted polymers (MIPs) for the drug reserpine (RES) using methacrylic acid (MAA) as the functional monomer were developed and characterised for the first time in this study. Evaluation of the various polymers by binding assays indicated that the optimum ratio of functional monomer to template w...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2007.04.036

    authors: Shi X,Wu A,Qu G,Li R,Zhang D

    更新日期:2007-09-01 00:00:00

  • Template synthesized poly(epsilon-caprolactone) nanowire surfaces for neural tissue engineering.

    abstract::Tissue engineering therapies targeted at nerve regeneration in spinal cord injuries (SCI) have broad social and economic benefits to the American population. Due to the complicated pathophysiology of SCI, there are very few options available for functional regeneration of the spinal column. Nanotechnology offers inter...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2010.01.084

    authors: Bechara SL,Judson A,Popat KC

    更新日期:2010-05-01 00:00:00

  • Poly(vinyl alcohol)-heparin hydrogels as sensor catheter membranes.

    abstract::Poly(vinyl alcohol)-heparin hydrogels with varying water content were synthesized for use as sensor catheter membranes. Films were cast from aqueous mixtures of poly(vinyl alcohol) (PVA), a photosensitive cross-linker p-diazonium diphenyl amine polymer (PA), glutaraldehyde (GA) and heparin. After drying, the films wer...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(91)90134-v

    authors: Brinkman E,van der Does L,Bantjes A

    更新日期:1991-01-01 00:00:00

  • Colour centres in plasma-sprayed hydroxyapatite.

    abstract::Very pure hydroxyapatite is diamagnetic and shows no electron paramagnetic resonance (EPR) spectrum. Plasma-sprayed coatings made with such a pure hydroxyapatite contain paramagnetic point-defects. Irradiated deposits show a strong EPR absorption assigned to an O2- anion adjacent to a calcium vacancy, with anisotropic...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(92)90013-e

    authors: Sharrock P,Bonel G

    更新日期:1992-01-01 00:00:00

  • Intracellular redox-activated anticancer drug delivery by functionalized hollow mesoporous silica nanoreservoirs with tumor specificity.

    abstract::In this study, a type of intracellular redox-triggered hollow mesoporous silica nanoreservoirs (HMSNs) with tumor specificity was developed in order to deliver anticancer drug (i.e., doxorubicin (DOX)) to the target tumor cells with high therapeutic efficiency and reduced side effects. Firstly, adamantanamine was graf...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2014.05.058

    authors: Luo Z,Hu Y,Cai K,Ding X,Zhang Q,Li M,Ma X,Zhang B,Zeng Y,Li P,Li J,Liu J,Zhao Y

    更新日期:2014-09-01 00:00:00

  • Evaluation of the effect of three surface treatments on the biocompatibility of 316L stainless steel using human differentiated cells.

    abstract::AISI 316L stainless steel (SS) is widely used in orthopaedic implantology, although biological complications may result from its insufficient mechanical and tribological properties. In order to improve the wear and corrosion resistance as well as the hardness of 316L SS, three surface treatments, derived from those ap...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(96)82723-2

    authors: Bordji K,Jouzeau JY,Mainard D,Payan E,Delagoutte JP,Netter P

    更新日期:1996-03-01 00:00:00

  • Bioinspired nanoplatelets for chemo-photothermal therapy of breast cancer metastasis inhibition.

    abstract::Breast cancer is associated with high mortality due to tumor metastasis. The anti-metastasis efficacy of photochemotherapy is strictly limited by poor targeting capability with respect to circulating tumor cells (CTCs) in blood and lymph. Herein, we decorate the platelet membrane (PM) on a surface of nanoparticles (NP...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2019.03.024

    authors: Ye H,Wang K,Wang M,Liu R,Song H,Li N,Lu Q,Zhang W,Du Y,Yang W,Zhong L,Wang Y,Yu B,Wang H,Kan Q,Zhang H,Wang Y,He Z,Sun J

    更新日期:2019-06-01 00:00:00

  • Enhanced immunostimulatory effects of DNA-encapsulated peptide hydrogels.

    abstract::DNA that encodes tumor-specific antigens represents potential immunostimulatory agents. However, rapid enzymatic degradation and fragmentation of DNA during administration can result in limited vector expression and, consequently, poor efficacy. These challenges have necessitated the use of novel strategies for DNA de...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2015.02.125

    authors: Medina SH,Li S,Howard OM,Dunlap M,Trivett A,Schneider JP,Oppenheim JJ

    更新日期:2015-01-01 00:00:00

  • Sustained intra-articular release of celecoxib from in situ forming gels made of acetyl-capped PCLA-PEG-PCLA triblock copolymers in horses.

    abstract::In this study, the intra-articular tolerability and suitability for local and sustained release of an in situ forming gel composed of an acetyl-capped poly(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide) (PCLA-PEG-PCLA) copolymer loaded with celecoxib was investigated in horse join...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2015.02.109

    authors: Petit A,Redout EM,van de Lest CH,de Grauw JC,Müller B,Meyboom R,van Midwoud P,Vermonden T,Hennink WE,René van Weeren P

    更新日期:2015-01-01 00:00:00

  • Poly(glycerol-dodecanoate), a biodegradable polyester for medical devices and tissue engineering scaffolds.

    abstract::In this paper we describe the mechanical and biological features of a thermosetting polyester synthesized from glycerol and dodecanedioic acid named Poly-Glycerol-Dodecanoate (PGD). This polymer shows a glass transition temperature (T(g)) around 32 degrees C, and this accounts for its mechanical properties. At room te...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2009.08.021

    authors: Migneco F,Huang YC,Birla RK,Hollister SJ

    更新日期:2009-11-01 00:00:00

  • Rat costochondral cell characteristics on poly (L-lactide-co-epsilon-caprolactone) scaffolds.

    abstract::This study was designed to examine the adhesion, proliferation, and morphology of chondrocytes on new scaffolds; and to examine these cells histologically for the ability of the chondrocytes to maintain chondrogenic properties after subcutaneous implantation into nude mice. Both 75:25 poly (L-lactide-co-epsilon-caprol...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(03)00210-2

    authors: Honda M,Morikawa N,Hata K,Yada T,Morita S,Ueda M,Kimata K

    更新日期:2003-09-01 00:00:00

  • Interactions between endothelial cells and a poly(carbonate-silsesquioxane-bridge-urea)urethane.

    abstract::We have recently developed a polymer which contains silsesquioxane in the form of nano-bridges poly(carbonate-silsesquioxane-bridge-urea)urethane (PCBSU) for cardiovascular device applications. The polymer has been characterised and the durability has been confirmed with long-term in vivo tests. The aim of this study ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2005.03.034

    authors: Punshon G,Vara DS,Sales KM,Kidane AG,Salacinski HJ,Seifalian AM

    更新日期:2005-11-01 00:00:00

  • Study of a (trimethylenecarbonate-co-epsilon-caprolactone) polymer part 1: preparation of a new nerve guide through controlled random copolymerization using rare earth catalysts.

    abstract::Random copolymers of trimethylene carbonate and epsilon-caprolactone have been synthesized through ring-opening polymerization using rare earth alkoxides as initiator. The structure of the copolymers has been characterized by 1H and 13C NMR. Their thermal behaviour, their permeability to liquid and their mechanical pr...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(01)00029-1

    authors: Schappacher M,Fabre T,Mingotaud AF,Soum A

    更新日期:2001-11-01 00:00:00