Abstract:
:Plasma treatment is a method to modify the physicochemical properties of biomaterials, which consequently may affect interactions with cells. Based on the rationale that physical cues on the surface of culture substrates and implants, such as surface roughness, have proven to alter cell behaviour, we used electrospinning to fabricate fibrous three-dimensional scaffolds made of a poly (ethylene oxide terephthalate)/poly (butylene terephthalate) copolymer to mimic the physical microenvironment of extracellular matrix and applied radio-frequency oxygen plasma treatment to create nanoscale roughness. Scanning electron microscopy (SEM) analysis revealed a fibre diameter of 5.49 ± 0.96 µm for as-spun meshes. Atomic force microscopy (AFM) measurements determined an exponential increase of surface roughness with plasma treatment time. An increase in hydrophilicity after plasma treatment was observed, which was associated with higher oxygen content in plasma treated scaffolds compared to untreated ones. A more pronounced adsorption of bovine serum albumin occurred on scaffolds treated with plasma for 15 and 30 min compared to untreated fibres. Clinically relevant human mesenchymal stromal cells (hMSCs) were cultured on untreated, 15 and 30 min treated scaffolds. SEM analysis confirmed cell attachment and a pronounced spindle-like morphology on all scaffolds. No significant differences were observed between different scaffolds regarding the amount of DNA, metabolic activity and alkaline phosphatase (ALP) activity after 7 days of culture. The amount of ALP positive cells increased between 7 and 21 days of culture on both untreated and 30 min treated meshes. In addition, ALP staining of cells on plasma treated meshes appeared more pronounced than on untreated meshes after 21 days of culture. Quantitative polymerase chain reaction showed significant upregulation of bone sialoprotein and osteonectin expression on oxygen plasma treated fibres compared to untreated fibres in basic culture medium after 7 days of culture, while no differences were observed in the expression of other osteogenic markers. At 21 days, no osteocalcin protein could be detected by ELISA at any of the substrates. In conclusion, this study shows that oxygen plasma treatment can successfully be applied to modify the nanoscale surface properties of polymeric electrospun fibre meshes, which in turn may positively affect osteogenic differentiation of hMSCs.
journal_name
Biofabricationjournal_title
Biofabricationauthors
Nandakumar A,Tahmasebi Birgani Z,Santos D,Mentink A,Auffermann N,van der Werf K,Bennink M,Moroni L,van Blitterswijk C,Habibovic Pdoi
10.1088/1758-5082/5/1/015006subject
Has Abstractpub_date
2013-03-01 00:00:00pages
015006issue
1eissn
1758-5082issn
1758-5090journal_volume
5pub_type
杂志文章相关文献
Biofabrication文献大全abstract::Tissue engineering aims to create implantable biomaterials for the repair and regeneration of damaged tissues. In vitro tissue engineering is generally based on static culture, which limits access to nutrients and lacks mechanical signaling. Using shear stress is controversial because in some cases it can lead to cell...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/aba412
更新日期:2020-08-10 00:00:00
abstract::This paper presents a novel continuous tool-path planning methodology for hollowed scaffold fabrication in tissue engineering. A new functionally gradient porous architecture is proposed with a continuous material deposition planning scheme. A controllable variational pore size and hence the porosity have been achieve...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5082/3/3/034106
更新日期:2011-09-01 00:00:00
abstract::A bio-inspired hydrogel for 3D bioprinting of soft free-standing neural tissues is presented. The novel filler-free bioinks were designed by combining natural polymers for extracellular matrix biomimicry with synthetic polymers to endow desirable rheological properties for 3D bioprinting. Crosslinking of thiolated Plu...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/ab02c9
更新日期:2019-02-25 00:00:00
abstract::In clinical islet transplantation, allogeneic islets of Langerhans are transplanted into the portal vein of patients with type 1 diabetes, enabling the restoration of normoglycemia. After intra-hepatic transplantation several factors are involved in the decay in islet mass and function mainly caused by an immediate bl...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/7/2/025009
更新日期:2015-05-28 00:00:00
abstract::Tissue engineering based on building blocks is an emerging method to fabricate 3D tissue constructs. This method requires depositing and assembling building blocks (cell-laden microgels) at high throughput. The current technologies (e.g., molding and photolithography) to fabricate microgels have throughput challenges ...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5082/2/1/014105
更新日期:2010-03-01 00:00:00
abstract::We report a method for preparing cell-laden hydrogel tubes. This method uses a coaxial double-orifice spinneret, simpler than triple-orifice spinnerets which have been used for preparing similar constructs. The intended application was to create a template for preparing filament-like structures composed of two heterog...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5082/5/1/015012
更新日期:2013-03-01 00:00:00
abstract::The physical and mechanical properties of cells modulate their behavior such proliferation rate, migration and extracellular matrix remodeling. In order to study cell behavior in a tissue-like environment in vitro, it is of utmost importance to develop biologically and physically relevant 3D cell models. Here, we char...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/aa6ed5
更新日期:2017-05-11 00:00:00
abstract::An ordered cellulose film scaffold, termed a nematic ordered cellulose (NOC) template, had unique surface properties and successfully induced the establishment of a three-dimensional (3D), hierarchical structure of epidermal cells by cell attachment and subsequent culture. Initially, the scaffold surface properties we...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5082/5/2/025010
更新日期:2013-06-01 00:00:00
abstract::Tissue engineering has been developed with the ultimate aim of manufacturing human organs, but success has been limited to only thin tissues and tissues with no significant structures. In order to construct more complicated tissues, we have developed a three-dimensional (3D) fabrication technology in which 3D structur...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5082/3/3/034113
更新日期:2011-09-01 00:00:00
abstract::In recent years, novel biofabrication technologies have enabled the rapid manufacture of hydrogel-cell suspensions into tissue-imitating constructs. The development of novel materials for biofabrication still remains a challenge due to a gap between contradicting requirements such as three-dimensional printability and...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/8/2/025011
更新日期:2016-05-20 00:00:00
abstract::Electrospinning has been widely used to produce ultrafine fibers in microscale and nanoscale; however, traditional electrospinning processes are currently beset by troublesome limitations in fabrication of 3D periodic porous structures because of the chaotic nature of the electrospinning jet. Here we report a novel st...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/7/4/045004
更新日期:2015-11-05 00:00:00
abstract::We previously developed the Bio-Pick, Place, and Perfuse (Bio-P3) instrument to fabricate large perfusable tissue constructs by stacking and aligning scaffold-free living microtissues with integrated lumens. The Bio-P3 required an actuating mechanism to manipulate living microtissues of various sizes and shapes that a...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/8/2/025015
更新日期:2016-05-25 00:00:00
abstract::Critical understanding of the complex metastatic cascade of prostate cancer is necessary for the development of a therapeutic interventions for treating metastatic prostate cancer. Increasing evidence supports the synergistic role of biochemical and biophysical cues in cancer progression at metastases. The biochemical...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/abd9d6
更新日期:2021-01-08 00:00:00
abstract::Calcium alginate hydrogels are widely used as biocompatible materials in a substantial number of biomedical applications. This paper reports on a hybrid 3D printing and electrodeposition approach for forming 3D calcium alginate hydrogels in a controllable manner. Firstly, a specific 3D hydrogel printing system is deve...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/aa6ed8
更新日期:2017-06-07 00:00:00
abstract::We demonstrate a simple, accurate and versatile method to manipulate Parylene C, a material widely known for its high biocompatibility, and transform it to a substrate that can effectively control the cellular microenvironment and consequently affect the morphology and function of the cells in vitro. The Parylene C sc...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5082/6/2/025004
更新日期:2014-06-01 00:00:00
abstract::To overcome the drawbacks of in vitro liver testing during drug development, numerous liver-on-a-chip models have been developed. However, current liver-on-a-chip technologies are labor-intensive, lack extracellular matrix (ECM) essential for liver cells, and lack a biliary system essential for excreting bile acids, w...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/aaf9fa
更新日期:2019-01-16 00:00:00
abstract::How to pack materials into well-defined volumes efficiently has been a longstanding question of interest to physicists, material scientists, and mathematicians as these materials have broad applications ranging from shipping goods in commerce to seeds in agriculture and to spheroids in tissue engineering. How many mar...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/ab76d9
更新日期:2020-03-31 00:00:00
abstract::Plant cell cultures produce active agents for pharmaceuticals, food and cosmetics. However, up to now process control for plant cell suspension cultures is challenging. A positive impact of cell immobilization, such as encapsulation in hydrogel beads, on secondary metabolites production has been reported for several p...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/aa8854
更新日期:2017-11-14 00:00:00
abstract::Electrospun fibers of natural polymers are desirable for biomedical applications such as tissue engineering. Crosslinking of electrospun fibers of natural polymers is needed to prevent dissolution in water and to enhance mechanical strength. In this study, an in situ UV-crosslinking method was developed for crosslinki...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5082/5/3/035008
更新日期:2013-09-01 00:00:00
abstract::The tumour microenvironment is heterogeneous and consists of multiple cell types, variable extracellular matrix (ECM) composition, and contains cell-defined gradients of small molecules, oxygen, nutrients and waste. Emerging in vitro cell culture systems that attempt to replicate these features often fail to incorpora...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/8/4/045008
更新日期:2016-10-18 00:00:00
abstract::Laser-assisted bioprinting (LaBP) allows the realization of computer-generated 3D tissue grafts consisting of cells embedded in a hydrogel environment. In this study, human adipose-derived stem cells (hASCs) were printed in a free-scalable 3D grid pattern by means of LaBP. We demonstrate that neither the proliferation...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5082/3/1/015005
更新日期:2011-03-01 00:00:00
abstract::A Caco-2 cell culture on Transwell, an alternative testing to animal or human testing used in evaluating drug intestinal permeability, incorrectly estimated the absorption of actively transported drugs due to the low expression of membrane transporters. Similarly, three-dimensional (3D) cultures of Caco-2 cells, which...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/7/1/015003
更新日期:2014-12-17 00:00:00
abstract::We report on the fabrication of silicon-reinforced carbon (C:Si) structures by combinatorial pulsed laser deposition to search for the best design for a new generation of multi-functional coated implants. The synthesized films were characterized from the morphological, structural, compositional, mechanical and microbi...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/aa7076
更新日期:2017-06-01 00:00:00
abstract::Fabricating three-dimensional, biocompatible microenvironments to support functional tissue assembly remains a key challenge in cardiac tissue engineering. We hypothesized that since the omentum can be removed from patients by minimally invasive procedures, the obtained underlying matrices can be manipulated to serve ...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5082/6/2/024101
更新日期:2014-06-01 00:00:00
abstract::In this study, we report the step-gradient nanocomposite (NC) hydrogel generated easily by spatial connection of different nanocomposite hydrogel pastes varying in the concentrations of nanomaterials with the aid of a 3D printing technique. The prepared 3D printed gradient NC hydrogel has self-adhesive properties and ...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/ab3582
更新日期:2019-08-22 00:00:00
abstract::Advances in three-dimensional cell cultures offer new opportunities in biomedical research and drug development. However, there are still challenges to overcome, including the lack of reliability, repeatability and complexity of tissues obtained by these techniques. In this study, we describe a new bioprinting system ...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/aaf625
更新日期:2018-12-27 00:00:00
abstract::An engineered three-dimensional scaffold with hierarchical porosity and multiple niche microenvironments is produced using a combined multi-nozzle deposition-freeze casting technique. In this paper we present a process to fabricate a scaffold with improved interconnectivity and hierarchical porosity. The scaffold is p...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5082/6/1/015007
更新日期:2014-03-01 00:00:00
abstract::Nowadays, 3D bioprinting technologies are rapidly emerging in the field of tissue engineering and regenerative medicine as effective tools enabling the fabrication of advanced tissue constructs that can recapitulate in vitro organ/tissue functions. Selecting the best strategy for bioink deposition is often challenging...
journal_title:Biofabrication
pub_type: 杂志文章,评审
doi:10.1088/1758-5090/aae605
更新日期:2018-11-09 00:00:00
abstract::As an alternative to conventional cell culture and animal testing, an organ-on-a-chip is applied to study the biological phenomena of organ development and disease, as well as the interactions between human tissues and external stimuli such as chemicals, forces and electricity. The pattern design of a microfluidic cha...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5090/aaa900
更新日期:2018-02-05 00:00:00
abstract::A major challenge in muscle tissue engineering is mimicking the ordered nanostructure of native collagen fibrils in muscles. Electrospun nanofiber constructs have been proposed as promising candidate alternatives to natural extracellular matrix. Here, we introduce a novel method to fabricate a two-dimension (2D) sheet...
journal_title:Biofabrication
pub_type: 杂志文章
doi:10.1088/1758-5082/6/2/024107
更新日期:2014-06-01 00:00:00