Design of 3D printed insert for hanging culture of Caco-2 cells.

abstract：:We have developed cell sheet technology as a modern method for the fabrication of functional tissue-like and organ-like structures. This technology allows for a sheet of interconnected cells and cells in full contact with their natural extracellular environment to be obtained. A cell sheet can be patterned and compose...

journal_title：Biofabrication

authors： Hannachi IE,Yamato M,Okano T

更新日期：2009-06-01 00:00:00

abstract：:This paper presents a novel continuous tool-path planning methodology for hollowed scaffold fabrication in tissue engineering. A new functionally gradient porous architecture is proposed with a continuous material deposition planning scheme. A controllable variational pore size and hence the porosity have been achieve...

journal_title：Biofabrication

authors： Khoda AK,Ozbolat IT,Koc B

更新日期：2011-09-01 00:00:00

abstract：:Three-dimensional (3D) printed poly(ε-caprolactone) (PCL) based scaffolds have being proposed for different tissue engineering applications. This study addresses the design and fabrication of 3D PCL constructs with different struts alignments at 90°, 45° and 90° with offset. The morphology and the mechanical behavior ...

journal_title：Biofabrication

authors： Ribeiro JFM,Oliveira SM,Alves JL,Pedro AJ,Reis RL,Fernandes EM,Mano JF

更新日期：2017-05-11 00:00:00

abstract：:Traditional drug discovery involves the screening of lead compounds from a chemical library by using cell-based high throughput screening (HTS) procedures. This has created a demand for the development of cell-based microarray chips for HTS of compounds. Although several cell-based microarray devices and procedures fo...

journal_title：Biofabrication

authors： Fujita S,Onuki-Nagasaki R,Ikuta K,Hara Y

更新日期：2016-12-05 00:00:00

abstract：:One of the major issues in tissue engineering has been the development of three-dimensional (3D) scaffolds, which serve as a structural template for cell growth and extracellular matrix formation. In scaffold-based tissue engineering, 3D printing (3DP) technology has been successfully applied for the fabrication of co...

journal_title：Biofabrication

authors： Park JH,Jung JW,Kang HW,Cho DW

更新日期：2014-06-01 00:00:00

abstract：:Calcium alginate hydrogels are widely used as biocompatible materials in a substantial number of biomedical applications. This paper reports on a hybrid 3D printing and electrodeposition approach for forming 3D calcium alginate hydrogels in a controllable manner. Firstly, a specific 3D hydrogel printing system is deve...

journal_title：Biofabrication

authors： Shang W,Liu Y,Wan W,Hu C,Liu Z,Wong CT,Fukuda T,Shen Y

更新日期：2017-06-07 00:00:00

abstract：:Tissue rings with incorporated microscaffolds have been engineered as promising building blocks for constructing biological tubes from the bottom up. However, the microscaffolds available for incorporation are very limited at present. In this paper we provide an efficient strategy to first incorporate microfluidic spu...

journal_title：Biofabrication

authors： Sun T,Shi Q,Yao Y,Sun J,Wang H,Huang Q,Fukuda T

更新日期：2019-06-25 00:00:00

abstract：:The physical and mechanical properties of cells modulate their behavior such proliferation rate, migration and extracellular matrix remodeling. In order to study cell behavior in a tissue-like environment in vitro, it is of utmost importance to develop biologically and physically relevant 3D cell models. Here, we char...

journal_title：Biofabrication

authors： Pillet F,Gibot L,Madi M,Rols MP,Dague E

更新日期：2017-05-11 00:00:00

abstract：:A recently emerged approach for tissue engineering is to biofabricate tissues using cellular spheroids as building blocks. Human pluripotent stem cells (hPSCs), including human embryonic stem cells (hESCs) and induced pluripotent stem cells (iPSCs), can be cultured to generate large numbers of cells and can presumably...

journal_title：Biofabrication

authors： Lin H,Li Q,Lei Y

更新日期：2017-04-24 00:00:00

abstract：:Tissue engineering has been developed with the ultimate aim of manufacturing human organs, but success has been limited to only thin tissues and tissues with no significant structures. In order to construct more complicated tissues, we have developed a three-dimensional (3D) fabrication technology in which 3D structur...

journal_title：Biofabrication

authors： Arai K,Iwanaga S,Toda H,Genci C,Nishiyama Y,Nakamura M

更新日期：2011-09-01 00:00:00

abstract：:Drop-on-demand (DoD) inkjet printing has been explored for a range of applications, including those to selectively deposit cellular material, due to the high accuracy and scalability of such systems when compared with alternative bioprinting techniques. Despite this, there remain considerable limitations when handling...

journal_title：Biofabrication

authors： Dudman JPR,Ferreira AM,Gentile P,Wang X,Ribeiro RDC,Benning M,Dalgarno KW

更新日期：2020-08-12 00:00:00

abstract：:In recent years, novel biofabrication technologies have enabled the rapid manufacture of hydrogel-cell suspensions into tissue-imitating constructs. The development of novel materials for biofabrication still remains a challenge due to a gap between contradicting requirements such as three-dimensional printability and...

journal_title：Biofabrication

authors： Köpf M,Campos DF,Blaeser A,Sen KS,Fischer H

更新日期：2016-05-20 00:00:00

abstract：:We demonstrate a simple, accurate and versatile method to manipulate Parylene C, a material widely known for its high biocompatibility, and transform it to a substrate that can effectively control the cellular microenvironment and consequently affect the morphology and function of the cells in vitro. The Parylene C sc...

journal_title：Biofabrication

authors： Trantidou T,Rao C,Barrett H,Camelliti P,Pinto K,Yacoub MH,Athanasiou T,Toumazou C,Terracciano CM,Prodromakis T

更新日期：2014-06-01 00:00:00

abstract：:We previously developed the Bio-Pick, Place, and Perfuse (Bio-P3) instrument to fabricate large perfusable tissue constructs by stacking and aligning scaffold-free living microtissues with integrated lumens. The Bio-P3 required an actuating mechanism to manipulate living microtissues of various sizes and shapes that a...

journal_title：Biofabrication

authors： Ip BC,Cui F,Tripathi A,Morgan JR

更新日期：2016-05-25 00:00:00

abstract：:Cell therapy represents a promising option for revascularization of ischemic tissues. However, injection of dispersed cells is not optimal to ensure precise homing into the recipient's vasculature. Implantation of cell-engineered scaffolds around the occluded artery may obviate these limitations. Here, we employed the...

journal_title：Biofabrication

authors： Carrabba M,De Maria C,Oikawa A,Reni C,Rodriguez-Arabaolaza I,Spencer H,Slater S,Avolio E,Dang Z,Spinetti G,Madeddu P,Vozzi G

更新日期：2016-03-24 00:00:00

abstract：:Cell mechanical microenvironment (CMM) significantly affects cell behaviors such as spreading, migration, proliferation and differentiation. However, most studies on cell response to mechanical stimulation are based on two-dimensional (2D) planar substrates, which cannot mimic native three-dimensional (3D) CMM. Accumu...

journal_title：Biofabrication

authors： Huang G,Wang L,Wang S,Han Y,Wu J,Zhang Q,Xu F,Lu TJ

更新日期：2012-12-01 00:00:00

abstract：:Electrospun fibers of natural polymers are desirable for biomedical applications such as tissue engineering. Crosslinking of electrospun fibers of natural polymers is needed to prevent dissolution in water and to enhance mechanical strength. In this study, an in situ UV-crosslinking method was developed for crosslinki...

journal_title：Biofabrication

authors： Lin WH,Tsai WB

更新日期：2013-09-01 00:00:00

abstract：:Calcified cartilage regeneration plays an important role in successful osteochondral repair, since it provides a biological and mechanical transition from the unmineralized cartilage at the articulating surface to the underlying mineralized bone. To biomimic native calcified cartilage in engineered constructs, here we...

journal_title：Biofabrication

authors： You F,Chen X,Cooper DML,Chang T,Eames BF

更新日期：2018-12-27 00:00:00

abstract：:A major limitation of existing 3D implantable structures for bone tissue engineering is that most of the cells rapidly attach on the outer edges of the structure, restricting the cells penetration into the inner parts and causing the formation of a necrotic core. Furthermore, these structures generally possess a rando...

journal_title：Biofabrication

authors： Paun IA,Popescu RC,Mustaciosu CC,Zamfirescu M,Calin BS,Mihailescu M,Dinescu M,Popescu A,Chioibasu D,Soproniy M,Luculescu CR

更新日期：2018-02-05 00:00:00

abstract：:Silica-bonded calcite scaffolds have been successfully 3D-printed by direct ink writing, starting from a paste comprising a silicone polymer and calcite powders, calibrated in order to match a SiO2/CaCO3 weight balance of 35/65. The scaffolds, fabricated with two slightly different geometries, were first cross-linked ...

journal_title：Biofabrication

authors： Fiocco L,Elsayed H,Badocco D,Pastore P,Bellucci D,Cannillo V,Detsch R,Boccaccini AR,Bernardo E

更新日期：2017-05-11 00:00:00

abstract：:An important unsolved challenge in tissue engineering has been the inability to replicate the geometry and function of vascular networks and blood vessels. Here, we engineer a user-defined 3D microfluidic vascular channel using 3D printing-enabled hydrogel casting. First, a hollow L-shaped channel is developed using a...

journal_title：Biofabrication

authors： Yang L,Shridhar SV,Gerwitz M,Soman P

更新日期：2016-08-26 00:00:00

abstract：:Tissue engineering aims to create implantable biomaterials for the repair and regeneration of damaged tissues. In vitro tissue engineering is generally based on static culture, which limits access to nutrients and lacks mechanical signaling. Using shear stress is controversial because in some cases it can lead to cell...

journal_title：Biofabrication

authors： Salinas EY,Aryaei A,Paschos N,Berson E,Kwon H,Hu JC,Athanasiou KA

更新日期：2020-08-10 00:00:00

abstract：:A critical consideration in tissue engineering is to recapitulate the microstructural organization of native tissues that is essential to their function. Scaffold-based techniques have focused on achieving this via the contact guidance principle wherein topographical cues offered by scaffold fibers direct migration an...

journal_title：Biofabrication

authors： Chansoria P,Narayanan LK,Schuchard K,Shirwaiker R

更新日期：2019-04-26 00:00:00

abstract：:To overcome the drawbacks of in vitro liver testing during drug development, numerous liver-on-a-chip models have been developed. However, current liver-on-a-chip technologies are labor-intensive, lack extracellular matrix (ECM) essential for liver cells, and lack a biliary system essential for excreting bile acids, w...

journal_title：Biofabrication

authors： Lee H,Chae S,Kim JY,Han W,Kim J,Choi Y,Cho DW

更新日期：2019-01-16 00:00:00

abstract：:Three-dimensional (3D) tissue models are invaluable tools that can closely reflect the in vivo physiological environment. However, they are usually difficult to develop, have a low throughput and are often costly; limiting their utility to most laboratories. The recent availability of inexpensive additive manufacturin...

journal_title：Biofabrication

authors： Flood P,Alvarez L,Reynaud EG

更新日期：2016-10-11 00:00:00

abstract：:In the pharmaceutical industry, new drugs are tested to find appropriate compounds for therapeutic purposes for contemporary diseases. Unfortunately, novel compounds emerge at expensive prices and current target evaluation processes have limited throughput, thus leading to an increase of cost and time for drug develop...

journal_title：Biofabrication

authors： Rodríguez-Dévora JI,Zhang B,Reyna D,Shi ZD,Xu T

更新日期：2012-09-01 00:00:00

abstract：:In conventional primary cultures, cardiac cells prepared from a newborn rat undergo spontaneous formation of cell clusters after several days. These cell clusters may be non-homogeneously distributed on a flat surface and show irregular beating which can be recorded by calcium ion imaging. In order to improve the cell...

journal_title：Biofabrication

authors： Wang L,Liu L,Magome N,Agladze K,Chen Y

更新日期：2013-09-01 00:00:00

abstract：:Recent research has been focusing on the generation of living personalized osteochondral constructs for joint repair. Native articular cartilage has a zonal structure, which is not reflected in current constructs and which may be a cause of the frequent failure of these repair attempts. Therefore, we investigated the ...

journal_title：Biofabrication

authors： Mancini IAD,Schmidt S,Brommer H,Pouran B,Schäfer S,Tessmar J,Mensinga A,van Rijen MHP,Groll J,Blunk T,Levato R,Malda J,van Weeren PR

更新日期：2020-07-01 00:00:00

abstract：:In the past few decades, 3D printing has played a significant role in fabricating scaffolds with consistent, complex structure that meet patient-specific needs in future clinical applications. Although many studies have contributed to this emerging field of additive manufacturing, which includes material development a...

journal_title：Biofabrication

authors： Guo T,Holzberg TR,Lim CG,Gao F,Gargava A,Trachtenberg JE,Mikos AG,Fisher JP

更新日期：2017-04-12 00:00:00

abstract：:In this study, we report the step-gradient nanocomposite (NC) hydrogel generated easily by spatial connection of different nanocomposite hydrogel pastes varying in the concentrations of nanomaterials with the aid of a 3D printing technique. The prepared 3D printed gradient NC hydrogel has self-adhesive properties and ...

journal_title：Biofabrication

authors： Motealleh A,Çelebi-Saltik B,Ermis N,Nowak S,Khademhosseini A,Kehr NS

更新日期：2019-08-22 00:00:00