Stress distribution in tooth resin core build-ups with different post-end positions in alveolar bone level under two kinds of load directions.

abstract：:The secretion of collagen by osteoblasts was observed by scanning electron microscopy (SEM). Osteoblast-like cells were cultured on a CO3apatite-collagen sponge reinforced with a porous HAp frame. After three days' incubation, a number of newly created matrix fibrils, forming a network structure, were observed at the ...

journal_title：Dental materials journal

authors： Hirata I,Nomura Y,Tabata H,Miake Y,Yanagisawa T,Okazaki M

更新日期：2005-09-01 00:00:00

abstract：:The diamond burs of two dental CAD/CAM systems (GN and CD) were examined if they could be used to fabricate up to 21 ceramic full crowns without fracture. After one, 11, and 21 machining times, the surfaces of the diamond burs were observed and the number of particles captured on SEM pictures was counted. The average ...

journal_title：Dental materials journal

authors： Yara A,Ogura H,Shinya A,Tomita S,Miyazaki T,Sugai Y,Sakamoto Y

更新日期：2005-03-01 00:00:00

abstract：:This study was designed to examine the effects of dose of recombinant human BMP-2 (rhBMP-2) on bone formation at palatal sites in 10-week-old (10w) and 70-week-old (70w) rats, when combined with a polylactate-polyglycolate copolymer/gelatine sponge (PGS). New bone formation was observed at six weeks after implantation...

journal_title：Dental materials journal

authors： Yamaji K,Kawanami M,Matsumoto A,Odajima T,Nishitani Y,Iwasaka K,Yoshimitsu K,Yoshiyama M

更新日期：2007-07-01 00:00:00

abstract：:The effect of acidic fluoride solution on NiTi arch wires was examined by testing crystal structure, tensile strength, morphology after fracture, and element release from wire under four different test solutions after 1 or 3 d immersion. Three-day immersion in a 0.2%/pH 4 solution did not form any new crystal structur...

journal_title：Dental materials journal

authors： Kwon YH,Cheon YD,Seol HJ,Lee JH,Kim HI

更新日期：2004-12-01 00:00:00

abstract：:The objective of the study was to compare 1) the mean micro-shear bond strength and 2) failure mode of cements to metals in nonenclosed and mold-enclosed specimens. Specimens were prepared in mold-enclosed and non-enclosed formats from two RMGIC's and a self-adhesive resin-cement. 3-way ANOVA analysis and Tukey post h...

journal_title：Dental materials journal

authors： Cheetham JJ,Palamara JE,Tyas MJ,Burrow MF

更新日期：2013-01-01 00:00:00

abstract：:The blending effect (BE) plays an important role in esthetics of the composite resin. The objective of this study was to determine the extents to which filler size and content affect the BE. Three types of fillers (0.7, 1.0, and 1.5 µm) were mixed at weight contents of 60, 70, 75, and 80%. This study simulated clinica...

journal_title：Dental materials journal

authors： Suh YR,Ahn JS,Ju SW,Kim KM

更新日期：2017-01-31 00:00:00

abstract：:This paper reviews the development of dental adhesives by collating information of related studies from original scientific papers, reviews, and patent literatures. Through our development, novel radical polymerization initiators, adhesive monomers, and microcapsules were synthesized, and their effects on adhesion wer...

journal_title：Dental materials journal

authors： Ikemura K,Endo T

更新日期：2010-03-01 00:00:00

abstract：:The purpose of this study was to investigate the effect of remaining dentin thickness (RDT) and long term water storage on dentin bond strength in-vitro. Twenty-seven third molars were randomly divided into 3 groups: Clearfil Bond SE ONE (SE1, Kuraray Noritake Dental, Okayama, Japan), G-Bond plus (GB, GC, Tokyo, Japan...

journal_title：Dental materials journal

authors： Ting S,Chowdhury AFMA,Sun J,Kakuda S,Sidhu SK,Yoshida Y,Selimovic D,Sano H

更新日期：2018-07-29 00:00:00

abstract：:The aim of this in vitro study was to evaluate the effects of desensitizer pre-treatment on in-office bleaching using an artificial discoloration tooth model. The stained specimens were divided into four groups (n=10); without application (Control group), Shield Force plus (SF group), UltraEz (UE group) and Teeth Mate...

journal_title：Dental materials journal

authors： Kyaw KY,Otsuki M,Hiraishi N,Segarra MS,Tagami J

更新日期：2019-10-02 00:00:00

abstract：:This study investigated the effect of a coating material containing S-PRG fillers on the demineralization of bovine enamel and dentin, by measuring changes in the transmitted ultrasonic velocity. Bovine enamel and dentin specimens with and without coating (n=6 for each condition) were cut into blocks, immersed in 0.1 ...

journal_title：Dental materials journal

authors： Murayama R,Furuichi T,Yokokawa M,Takahashi F,Kawamoto R,Takamizawa T,Kurokawa H,Miyazaki M

更新日期：2012-01-01 00:00:00

abstract：:The objective of this study was to examine the effects of storage conditions on the flexural strengths of resin composite materials for CAD/CAM restorations. Seven commercially available resin composite CAD/CAM blanks were examined. Rectangular specimens (4.0×1.2×4.0 mm) of each material were trimmed from the blanks a...

journal_title：Dental materials journal

authors： Hibino Y,Nagasawa Y,Eda Y,Shigeta H,Nakajima H

更新日期：2020-09-29 00:00:00

abstract：:The aim of this study was to investigate the bond durability of heat-polymerized denture base resin to cast CP Ti and Co-Cr alloy. The alloy specimens were divided into five groups: 1) airborne-particle abraded with 50 µm alumina (SAND), 2) Rocatec tribochemical silica coating system (RO), 3) air-abraded followed by a...

journal_title：Dental materials journal

authors： Kawaguchi T,Shimizu H,Lassila LV,Vallittu PK,Takahashi Y

更新日期：2011-01-01 00:00:00

abstract：:The aim of this study was to evaluate the trial Teaching Robot for the development of a contact-type measuring apparatus for using directly in the oral cavity. A standard model was used to mimic the dentition by placing an arrangement of three bearing balls. The diameters of the balls were measured. A practical dentit...

journal_title：Dental materials journal

authors： Maikuma Y,Usui K,Araki K,Mataki S,Kurosaki N,Furuya N

更新日期：2003-06-01 00:00:00

abstract：:To improve the bioactivity of titanium surfaces, glow discharge was used to facilitate collagen grafting on titanium disks. Titanium test specimens were pre-treated by glow discharge fed with a mixture of argon and allylamine (AA) gases. Treated titanium disks were then grafted with type I collagen using glutaraldehyd...

journal_title：Dental materials journal

authors： Chang WJ,Ou KL,Lee SY,Chen JY,Abiko Y,Lin CT,Huang HM

更新日期：2008-05-01 00:00:00

abstract：:Bioactive-glass (B-G) is a material known for its favorable biological response when in contact with surrounding fibro-osseous tissues, due not only to an osteoconductive property, but also to an osteostimulatory capacity, and superior biocompatibility for use in human body. The objectives of this paper are to review ...

journal_title：Dental materials journal

authors： Profeta AC,Prucher GM

更新日期：2015-01-01 00:00:00

abstract：:The purpose of the this study was to evaluate the cytotoxicity of dental resin monomers in the presence of a rat liver S9 mix containing cytochrome P 450 enzymes. JTC-12 cells derived from a monkey kidney were seeded on a 96-well multi-well-plate at 9 x 10(3) cells per well. After cultivation, the S9 mix was added to ...

journal_title：Dental materials journal

authors： Hikage S,Sato A,Suzuki S,Cox CF,Sakaguchi K

更新日期：1999-03-01 00:00:00

abstract：:The present study investigated the influences of a denture strengthener on the deformation of a maxillary complete denture. Three groups of maxillary complete dentures were fabricated (Group 1 without a strengthener; Group 2 with a Co-Cr alloy wire strengthener; Group 3 with an experimental fiberglass strengthener). T...

journal_title：Dental materials journal

authors： Hirajima Y,Takahashi H,Minakuchi S

更新日期：2009-07-01 00:00:00

abstract：:The purpose of this study was to analyze the ultrastructures and chemical compositions of precipitates formed on mineral trioxide aggregate (MTA; White ProRoot MTA) immersed in distilled water (DW) or phosphate buffered saline (PBS), based on the attribution that MTA's bioactivity and sealing ability are influenced by...

journal_title：Dental materials journal

authors： Han L,Okiji T,Okawa S

更新日期：2010-10-01 00:00:00

abstract：:In this study, wedge-shaped CP titanium castings and Ti-6Al-7Nb alloy castings were produced by three types of investment. The effects of the castings' thickness on surface reaction layer were investigated by measuring Vickers hardness, observing the microstructure, and analyzing the oxygen concentration. It was found...

journal_title：Dental materials journal

authors： Kikuchi H,Onouchi M,Miyanaga K,Wakashima M,Okuno O,Nishiyama M

更新日期：2004-09-01 00:00:00

abstract：:This study was evaluating how three desensitizing toothpastes used at home influence the effect associated with desensitizing agents after application in the clinic. Fifty dentine disks measure it permeability and 32 dentine disks with similar permeability levels were selected. Following Dental desensitizer treatment,...

journal_title：Dental materials journal

authors： Hu ML,Zheng G,Jiang RD,Han JM,Zhang YD,Lin H

更新日期：2020-09-29 00:00:00

abstract：:The purpose of this study was to devise and propose appropriate conditions for the photographing of thermal images in the oral cavity and to evaluate which thermography techniques can be applied to dentistry by evaluating the differences in temperature among oral tissues. Thermal images of oral cavities of 20 voluntee...

journal_title：Dental materials journal

authors： Komoriyama M,Nomoto R,Tanaka R,Hosoya N,Gomi K,Iino F,Yashima A,Takayama Y,Tsuruta M,Tokiwa H,Kawasaki K,Arai T,Hosoi T,Hirashita A,Hirano S

更新日期：2003-12-01 00:00:00

abstract：:This study assessed the impact of surface treatments and repair resin reinforcement with zirconium oxide nano-particles (nano-ZrO2) on flexural strength (FS) of repaired denture base. A total of 320 heat-polymerized acrylic resin specimens were prepared and sectioned creating 2-mm gap. According to repair surface trea...

journal_title：Dental materials journal

authors： Gad MM,Rahoma A,Abualsaud R,Al-Thobity AM,Akhtar S,Helal MA,Al-Harbi FA

更新日期：2020-06-05 00:00:00

abstract：:Adhesion promoting monomers for dental metals, 5-(4-vinylbenzyl)-2-thiobarbituric acid (5VS), 6- (4-vinylbenzyl-n-propyl) amino-1,3,5-triazine-2,4-dithione (VBATDT) and 9,10-epithiodecyl methacrylate (EP8MA), were synthesized and surface treatment agents were prepared by dissolving each monomer in ethanol or acetone. ...

journal_title：Dental materials journal

authors： Kadoma Y

更新日期：2003-09-01 00:00:00

abstract：:This study examined the antimicrobial/antifungal ability of a tissue conditioner containing a photocatalyst for Escherichia coli, Streptococcus mutans, Staphylococcus aureus and Candida albicans. The photocatalyst was mixed with tissue conditioners powders at concentrations of 0, 10, 15, and 20 wt%. Tissue conditioner...

journal_title：Dental materials journal

authors： Uchimaru M,Sakai T,Moroi R,Shiota S,Shibata Y,Deguchi M,Sakai H,Yamashita Y,Terada Y

更新日期：2011-01-01 00:00:00

abstract：:The purpose of present investigation was to compare the cyto-genotoxicity induced by five dental alloys in vitro. The cyto-genotoxicity induced by five dental alloy extracts on human B lymphoblast cells was assessed with neutral red uptake (NRU) , CCK-8, comet and micronucleus (CBMN) assays in vitro, respectively. The...

journal_title：Dental materials journal

authors： Zhihong C,Yezhen L,Zhiyuan G,Zhongqiao Y,Xiaoxue L,Yifeng R,Weikun F,Jiliang H

更新日期：2011-01-01 00:00:00

abstract：:Major histocompatibility complex (MHC) class II molecule-expressing cells and macrophages play a pivotal role in mediating the host tissue response to biomaterials. This study investigated the responses of these cells to epoxy resin-based and 4-META-containing, methacrylate resin-based endodontic sealers (AH Plus and ...

journal_title：Dental materials journal

authors： Yamanaka Y,Shigetani Y,Yoshiba K,Kaneko T,Yoshiba N,Okiji T

更新日期：2013-01-01 00:00:00

abstract：:A new method of all-ceramic production using alumina coping has been developed. The present study investigates the influence of secondary firing (glass infiltration firing) conditions. Samples of porcelain build-up without secondary firing were also assessed. The suitability of coping that included secondary firing wa...

journal_title：Dental materials journal

authors： Masuda T,Kakimoto K,Takahashi K,Komasa Y

更新日期：2016-01-01 00:00:00

abstract：:The effects of monomer structure on the mechanical properties of visible light-cured composite resins based on the seven types of aromatic dimethacrylates were investigated. The results of this study suggested that the mechanical properties of the composite resins were dependent upon the chemical structure of the dime...

journal_title：Dental materials journal

authors： Kawaguchi M,Fukushima T,Horibe T

更新日期：1989-06-01 00:00:00

abstract：:To elucidate the cause of brittleness of porcelain fused to pure titanium (PFPT) which leads to chipping and cracking similar to that of conventional porcelain in clinical use, fracture toughness KIc, hardness (Hv and Hk) and fracture energy gamma reflecting the bonding energy of atoms were evaluated. In KIc there wer...

journal_title：Dental materials journal

authors： Higashino Y,Yamauchi M,Goto T,Nagasawa T

更新日期：2003-12-01 00:00:00

abstract：:Three commercially available porcelains bonded to titanium were evaluated to determine the weakest zone of the titanium-porcelain bonding structures. Tensile bond tests were performed for these specimens (NO, DU, and VI) and for Ni-Cr alloy-porcelain bonding samples that served as controls. The maximum bond strengths ...

journal_title：Dental materials journal

authors： Kannari Y,Endo K,Ida Y,Ochi M,Ohno H

更新日期：2014-01-01 00:00:00