Abstract:
:The purpose of this study was to investigate the effect of remaining dentin thickness (RDT) and long term water storage on dentin bond strength in-vitro. Twenty-seven third molars were randomly divided into 3 groups: Clearfil Bond SE ONE (SE1, Kuraray Noritake Dental, Okayama, Japan), G-Bond plus (GB, GC, Tokyo, Japan) and Clearfil Mega Bond (MB, Kuraray Noritake Dental). Bonded specimens were stored in water at 37ºC for 24 h. The teeth were then sectioned perpendicular to the adhesive interface to produce beams. RDT of each beam was measured digital calliper. Microtensile bond strength testing was carried out at a crosshead speed of 1 mm/min after 24 h and 1 year water storage. Thicker RDT produced higher bond strengths with one/two-step self-etch materials tested except for the group of 24 h MB. Nevertheless water storage time and RDT affected µTBS in all materials used.
journal_name
Dent Mater Jjournal_title
Dental materials journalauthors
Ting S,Chowdhury AFMA,Sun J,Kakuda S,Sidhu SK,Yoshida Y,Selimovic D,Sano Hdoi
10.4012/dmj.2017-140subject
Has Abstractpub_date
2018-07-29 00:00:00pages
562-567issue
4eissn
0287-4547issn
1881-1361journal_volume
37pub_type
杂志文章abstract::The behavior of microencapsulated polymerization initiators in dental adhesives is unknown. This study investigated the effects of new microencapsulated initiators in novel, multi-purpose, PMMA-type adhesive resin on the bonding performance and polymerization reactivity. Microencapsulated BPO and 1,3,5-trimethylbarbit...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.27.35
更新日期:2008-01-01 00:00:00
abstract::The efficacy of four commercial and two experimental dentin bonding systems was examined by observing the cavity adaptation of commercial light-cured resin composites restored in the dogs scheduled to be sacrificed after a medical experiment. Before being sacrificed, a cylindrical class V cavity was prepared in each c...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.17.195
更新日期:1998-09-01 00:00:00
abstract::Ti-6Al-7Nb alloy was cast into three differently designed, removable partial denture frameworks: Palatal strap (PS), Anterior-posterior bar (AP), and Horseshoe-shaped bar (HS). The vertical displacement and local strain of Ti-6Al-7Nb alloy frameworks were investigated to compare against those of Co-Cr alloy frameworks...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.23.497
更新日期:2004-12-01 00:00:00
abstract::Despite progress in the development of denture base resin and artificial tooth materials, dental clinics are still plagued with artificial teeth falling off the denture base--due to poor bond strength--after denture delivery. Against this background, this study sought to examine the effect and durability of an adhesiv...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.25.75
更新日期:2006-03-01 00:00:00
abstract::This study evaluated and compared the influence of different supporting abutment models on the fracture loads of three-unit fixed dental prostheses (FDPs) fabricated from the following materials (n=24/material): (i) IPS e.max CAD-on, (ii) IPS e.max ZirCAD, and (iii) Telio CAD. Twelve FDPs of each group were adhesively...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2013-344
更新日期:2014-01-01 00:00:00
abstract::The aim of this study was to evaluate the cytotoxicity of contemporary flowable and paste-like bulk-fill dental composites by using a real-time cell analysis. In the present paper, cytotoxicity levels of five flowable, five paste-like bulk-fill composite materials and one conventional flowable, one conventional paste-...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2018-336
更新日期:2020-01-31 00:00:00
abstract::This in vitro study aimed to evaluate the effect of two different polymer-based CAD/CAM materials; resin-nano ceramic (Lava Ultimate [LVU]) and composite (CERASMART [CS]), their different surface pre-treatments, and use of different resin cements on the µTBS of adhesively bonded CAD/CAM onlays to dentin. CAD/CAM mater...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2017-442
更新日期:2019-02-08 00:00:00
abstract::This study investigated the effects of spherical silica fillers on the physical and mechanical properties of resin-modified glass-ionomer cement (RMGIC). Specimens were fabricated by mixing untreated (UF) or silanized (SF) spherical silica filler into the powder of a commercially prepared RMGIC. The original RMGIC and...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.23.146
更新日期:2004-06-01 00:00:00
abstract::In tissue engineering, biodegradable polymer materials with both high biocompatibility and high strength are very important as scaffolds for long term use. Therefore, in this research, we tried to prepare the three types of poly(L-lactic acid) (PLLA)/calcium phosphate (CP) hybrid composite for a scaffold biomaterial. ...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2012-117
更新日期:2012-01-01 00:00:00
abstract::This study evaluated the biomineralization and dentinal tubules occlusion abilities of the carboxyl-terminated polyamidoamine dendrimer (PAMAM-COOH) on human demineralized dentin in vivo at different time points. Demineralization dentin model with and without treated with PAMAM-COOH were sutured to the interior side o...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2015-209
更新日期:2016-01-01 00:00:00
abstract::The purpose of the this study was to evaluate the cytotoxicity of dental resin monomers in the presence of a rat liver S9 mix containing cytochrome P 450 enzymes. JTC-12 cells derived from a monkey kidney were seeded on a 96-well multi-well-plate at 9 x 10(3) cells per well. After cultivation, the S9 mix was added to ...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.18.76
更新日期:1999-03-01 00:00:00
abstract::The aim of the study was to evaluate bone regeneration using a canine model with surgically created periodontal defects filled for 12 weeks using a stratified biomaterial consisting in a biphasic calcium phosphate (BCP) covered with a crosslinking hydrogel acting as polymer membrane of silated hydroxypropyl methylcell...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2017-238
更新日期:2018-09-30 00:00:00
abstract::This study was carried out to investigate the influences of elastic moduli of the dowel-core combination on the stress distribution in the root by the use of 2-dimensional finite element analysis. The peak stress at the dowel-cement interface was influenced strongly by a change of elastic modulus of the post (from 20,...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.19.50
更新日期:2000-03-01 00:00:00
abstract::In this study, two types of porous zirconia and dense zirconia were used. The flexural strength of non-layered zirconia specimens and those of the layered zirconia specimens with veneering porcelain were examined. Furthermore, the shear bond strength of veneering porcelain to zirconia was examined. The flexural streng...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2013-191
更新日期:2014-01-01 00:00:00
abstract::Cyclic torsional loading tests were carried out in the laboratory using various implant systems, in order to clarify differences between the systems in loosening of abutment screws. Six samples from six commercially available abutment systems were used, giving a total of 36 samples. Four of the systems used internal c...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2015-023
更新日期:2015-01-01 00:00:00
abstract::Novel fast-setting calcium silicate cement with fluoride (CSC) has been developed for potential applications in tooth crown. The aim of this study was to test the diametral tensile strength (DTS) of different CSC compositions in humid condition on day1, 28, and 180. We tested 'bond CSC' with 3.5% fluoride and no radio...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2015-390
更新日期:2016-01-01 00:00:00
abstract::The purpose of this review is to summarise recent advances in the design and composition of bioactive surface layers of implantabile biomaterials, and thus the genetic potential of osteoprogenitor cells to recognize and respond to these diverse implanted biomaterials. Changes applied to a biomaterial's surface, in gen...
journal_title:Dental materials journal
pub_type: 杂志文章,评审
doi:10.4012/dmj.19.99
更新日期:2000-06-01 00:00:00
abstract::To improve the bioactivity of titanium surfaces, glow discharge was used to facilitate collagen grafting on titanium disks. Titanium test specimens were pre-treated by glow discharge fed with a mixture of argon and allylamine (AA) gases. Treated titanium disks were then grafted with type I collagen using glutaraldehyd...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.27.340
更新日期:2008-05-01 00:00:00
abstract::Although titanium has been widely used in prosthetic appliances, such as cast removable partial denture frameworks, high quality castings are still difficult to obtain. This study proposes a new partition technique using a metal foil for improving castability of a two-chamber pressure casting unit. The metal foil was ...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.19.307
更新日期:2000-09-01 00:00:00
abstract::The possibility of the segregation under solidification process using a centrifugal casting machine was investigated using an electron probe microanalyzer with elemental distribution map, line analysis and quantitative analysis. When a very small quantity of platinum was added to local molten titanium during the casti...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.15.212
更新日期:1996-12-01 00:00:00
abstract::The aim of the present study was to measure various mechanical properties of acrylic denture base resins, including flexural modulus, flexural strength, fracture toughness, Barcol and Vickers hardness and their related properties, and to investigate correlations between different mechanical properties. Resin specimens...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2011-205
更新日期:2012-02-03 00:00:00
abstract::The purpose of the present study was to analyze effective factors including periodontal ligament on vertical root fractures (VRFs). Eighty maxillary central incisors were assigned to eight groups, depending on master apical file (MAF) size, loading point and existence of a simulated periodontal ligament (PDL). The gut...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.24.66
更新日期:2005-03-01 00:00:00
abstract::The extent of polymerization of light-cured composite resins cured in relatively large class II cavities was estimated by measuring Knoop hardness on sectioned surfaces of resin restorations. The influences of the incremental placement technique, exposure time, and post-curing of resin inlay on the extent of polymeriz...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.12.159
更新日期:1993-12-01 00:00:00
abstract::This study was designed to examine the effects of dose of recombinant human BMP-2 (rhBMP-2) on bone formation at palatal sites in 10-week-old (10w) and 70-week-old (70w) rats, when combined with a polylactate-polyglycolate copolymer/gelatine sponge (PGS). New bone formation was observed at six weeks after implantation...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.26.481
更新日期:2007-07-01 00:00:00
abstract::The aim of this study was to investigate the diffusion of red-stained experimental GM primer and blue-stained dentin bonding agent into EDTA-conditioned dentin and the effect of GM priming on contraction gap formation. After GM priming at 0, 35, 70, or 100 vol%, marginal adaptation was evaluated by measuring the wall-...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2009-084
更新日期:2010-10-01 00:00:00
abstract::The purpose of this study was to evaluate, in vitro, the antimicrobial effect of iRoot BP, iRoot BP Plus, and mineral trioxide aggregate (MTA) against Entercoccus faecalis and Candida albicans by using direct contact test. The materials were tested immediately after application to the microtiter wells and after settin...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2013-250
更新日期:2014-01-01 00:00:00
abstract::This study evaluated the irrigation extrusion and smear layer (SL) removal of continuous ultrasonic irrigation (CUI). Forty root canals were shaped, embedded in warm sterile saline agar colored with 1% acid red, and distributed into four groups; three groups had the final irrigation sequence of sodium hypochlorite and...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2016-411
更新日期:2018-01-30 00:00:00
abstract::The purpose of this study was to propose a new numerical modeling of the glass fiber cloth reinforced denture base resin (GFRP). The proposed model is constructed with an isotropic shell, beam and orthotropic shell elements representing the outmost resin, interlaminar resin and glass fiber cloth, respectively. The pro...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.21.105
更新日期:2002-06-01 00:00:00
abstract::This study was designed to evaluate the cytotoxicity of four dentin bonding agents and the effects of an antioxidant addition. Group A: G-aenial Bond, Group B: Optibond All in One, Group C: Gluma Self Etch and Group D: Clearfil S(3) Bond were added to the medium using extract method. The cells were cultured with or wi...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2015-079
更新日期:2015-01-01 00:00:00
abstract::This study aimed to evaluate the effect of sulfinic acid sodium salt interposition after acid and sodium hypochlorite treatment (NC treatment) on dentin bonding durability using a mild type one-step self-etching adhesive. Fifteen human third molars were randomly assigned into three experimental groups according to den...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2017-105
更新日期:2017-11-29 00:00:00