Abstract:
:Semiconduction activation energies of adenine, guanine, thymine and uracil complexes with acridine orange dye at various dye concentrations were measured in both Ohmic and space charge limited (SCL) current regimes. The behaviour of the complexes is non-extrinsic at high dye concentrations but extrinsic at low dye concentrations. Dominant electron and hole levels are shown to depend also on dye concentration. Various transport parameters have been evaluated.
journal_name
Biomaterialsjournal_title
Biomaterialsauthors
Sarkar D,Misra TNdoi
10.1016/0142-9612(89)90025-2subject
Has Abstractpub_date
1989-04-01 00:00:00pages
202-5issue
3eissn
0142-9612issn
1878-5905pii
0142-9612(89)90025-2journal_volume
10pub_type
杂志文章相关文献
BIOMATERIALS文献大全abstract::DNA that encodes tumor-specific antigens represents potential immunostimulatory agents. However, rapid enzymatic degradation and fragmentation of DNA during administration can result in limited vector expression and, consequently, poor efficacy. These challenges have necessitated the use of novel strategies for DNA de...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2015.02.125
更新日期:2015-01-01 00:00:00
abstract::A new diamond ATR FTIR method has been developed to quantify the processes occurring in the resin-modified glass-ionomer cement (RMGIC). Fuji II LC (Improved), at 1 mm depth from the cement/water interface. With Fuji II LC (Improved) various changes in the spectra due to 90% monomer polymerisation were observed within...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(02)00092-3
更新日期:2002-08-01 00:00:00
abstract::We present a facile synthesis of europium-doped gadolinium sulfide (GdS:Eu(3+)) opto-magnetic nanoparticles (NPs) via sonochemistry. Their photoluminescence and strong paramagnetic properties enable these NPs to be utilized as an in vitro cell imaging and in vivo T(1)-weighted MR imaging probe. The GdS:Eu(3+) NPs have...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2012.04.059
更新日期:2012-08-01 00:00:00
abstract::Bacterial infection has been a threat to human health, and so early diagnosis and treatment of bacterial infection is an urgent problem that needs to be solved. In this work, a multifunctional theranostic selenium nanoplatform (Se@PEP-Ru NPs) with early imaging diagnosis and efficient treatment of bacterial infections...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2017.07.005
更新日期:2017-10-01 00:00:00
abstract::Adhesion of cells to surfaces is a basic and important requirement in cell culture and tissue engineering. Here, we designed artificial extracellular matrix (ECM) mimics for efficient cellular attachment, based on mussel adhesive protein (MAP) fusion with biofunctional peptides originating from ECM materials, includin...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2010.08.027
更新日期:2010-12-01 00:00:00
abstract::This study was designed to explore the feasibility of using cartilage-derived morphogenetic protein-1 (CDMP1) induced dermal fibroblasts (DFs) as seed cells and polyglycolide (PGA) as scaffold for fibrocartilage engineering. DFs isolated from canine were expanded and seeded on PGA scaffold to fabricate cell/scaffold c...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2009.02.027
更新日期:2009-07-01 00:00:00
abstract::The aim of our study was the evaluation of a cell-free cartilage implant that allows the recruitment of mesenchymal stem and progenitor cells by chemo-attractants and subsequent guidance of the progenitors to form cartilage repair tissue after microfracture. Chemotactic activity of human serum on human mesenchymal pro...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2007.09.005
更新日期:2007-12-01 00:00:00
abstract::Poly(ether-ether-ketone) (PEEK) has been used as a load bearing orthopaedic implant material with clinical success. All of the orthopaedic applications contain stress concentrations (notches) in their design; however, little work has been done to examine the fatigue behavior of PEEK in the presence of a notch. This wo...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2010.08.032
更新日期:2010-12-01 00:00:00
abstract::The effect of inclusion of an immobilization matrix and the capsule membrane permeability on the viability, metabolic activity, and proliferation of encapsulated HEK cells was investigated in vitro. In the absence of a matrix, a particular transfected HEK cell line formed a single aggregate in the core of the poly(hyd...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(99)00251-3
更新日期:2000-05-01 00:00:00
abstract::Programmed cell death-ligand 1 (PD-L1)-based immune checkpoint blockade therapy using the anti-PD-L1 antibody is effective for a subset of patients with advanced metastatic melanoma but about half of the patients do not respond to the therapy because of the tumor immunosuppressive microenvironment. Immunogenic cell de...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2020.120604
更新日期:2020-12-17 00:00:00
abstract::Tissue engineering in vitro and in vivo involves the interaction of cells with a material surface. The nature of the surface can directly influence cellular response, ultimately affecting the rate and quality of new tissue formation. Initial events at the surface include the orientated adsorption of molecules from the...
journal_title:Biomaterials
pub_type: 杂志文章,评审
doi:10.1016/0142-9612(96)85758-9
更新日期:1996-01-01 00:00:00
abstract::Polydimethacrylate resins were prepared by photopolymerization of Bis-GMA, TEGDMA, UDMA or Bis-EMA (4) monomer, initiated by camphoroquinone/N,N-dimethylaminoethyl methacrylate system. The study of physical properties of these resins showed that TEGDMA seems to create the most dense polymer network, which however is t...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(02)00380-0
更新日期:2003-02-01 00:00:00
abstract::Very elastic poly(L-lactide-co-epsilon-caprolactone) (PLCL) (50:50) copolymer blended with gelatin was electrospun into microfibers from a hexafluoroisopropanol solution. PLCL fiber sheet exhibited the unique soft and flexible behavior while gelatin fiber was hard and brittle. As the gelatin content of PLCL/gelatin fi...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2007.12.029
更新日期:2008-04-01 00:00:00
abstract::Starvation therapy to slow down the tumor growth by cutting off its energy supply has been proposed to be an alternative therapeutic strategy for cancer treatment. Herein, glucose oxidase (GOx) is loaded into stealth liposomes and act as the glucose and oxygen elimination agent to trigger the conversion of glucose and...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2018.02.004
更新日期:2018-04-01 00:00:00
abstract::Translation of micelles from the laboratory to the clinic is limited by a poor understanding of their in vivo fate following administration. In this paper, we establish a robust approach to real-time monitoring of the in vivo stability of micelles using Förster Resonance Energy Transfer (FRET). This characterization m...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2014.01.027
更新日期:2014-04-01 00:00:00
abstract::In our previous study, a three-dimensional zein porous scaffold with a compressive Young's modulus of up to 86.6+/-19.9 MPa and a compressive strength of up to 11.8+/-1.7 MPa was prepared, and was suitable for culture of mesenchymal stem cells (MSCs) in vitro. In this study, we examined its tissue compatibility in a r...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2007.05.017
更新日期:2007-09-01 00:00:00
abstract::A novel class of multiblock poly(epsilon-caprolactone)-based polymers containing hydrophilic trioxyethylene segments and potentially relevant to the delivery of drugs is described in this work. L-phenylalanine residues may also be inserted into the hydrophilic blocks to generate peptide bonds susceptible to enzymatic ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(00)00291-x
更新日期:2001-06-01 00:00:00
abstract::Embryonic stem (ES) cells have the ability to replicate themselves and differentiate into various mature cells. Recently, dopaminergic neurons were efficiently induced from ES cells using mouse stromal cells (PA6 cells) as a feeder cell layer. This simple procedure seems to be very efficient to obtain dopamine-releasi...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2005.02.021
更新日期:2005-10-01 00:00:00
abstract::Parkinson's disease (PD) is one of the most common neurodegenerative diseases. Activins are members of the superfamily of transforming growth factors and have many potential neuroprotective effects. Herein, at the first place, we verified activin B's neuroprotective role in a PD model, and revealed that activin B's fa...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2016.06.016
更新日期:2016-09-01 00:00:00
abstract::In vitro experiments were conducted upon some common metallic biomaterials and carbons, both isolated or forming galvanic couples, in a cell specially designed for crevice corrosion studies. The alloys examined were AISI 316L stainless steel, Ti6AI4V and Co-Cr-Mo. The types of carbon were glassy carbon and carbon fibr...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(90)90110-c
更新日期:1990-07-01 00:00:00
abstract::We report a reducible copolymer self-assembled with superparamagnetic iron oxide nanoparticles (SPIONs) to deliver doxorubicin (DOX) for cancer therapy. The copolymer of reducible polyamidoamine (rPAA) with poly(ethylene glycol)(PEG)/dodecyl amine graft was synthesized by Michael addition. rPAA@SPIONs were formed by t...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2013.10.057
更新日期:2014-01-01 00:00:00
abstract::Synthetic hydroxyapatite particles of two median sizes and different morphologies have been used to manufacture hydroxyapatite reinforced high density polyethylene composites (HAPEX) for medical applications. The effects of hydroxyapatite particle size on properties of the resultant composites were investigated using ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(98)00154-9
更新日期:1998-12-01 00:00:00
abstract::A method to fabricate porous, biodegradable conduits using a combined injection molding, thermally induced phase transition technique was developed which produced conduits with dimensionally toleranced, longitudinally aligned channels. The geometry of the channels was designed to approximate the architecture of periph...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(02)00409-x
更新日期:2003-02-01 00:00:00
abstract::Levels of corrosion products released from dental alloys in natural or synthetic saliva, i.e. from amalgams, cobalt, gold, nickel, iron, or titanium based alloys have been surveyed. The amounts of Ag, Au, Cd, Co, Cr, Cu, Hg, Mo, Ti or Ni released from such alloys, either in vitro or in vivo during animal tests or duri...
journal_title:Biomaterials
pub_type: 杂志文章,评审
doi:10.1016/0142-9612(86)90097-9
更新日期:1986-05-01 00:00:00
abstract::The effect of hirudin, a known inhibitor of thrombin, was evaluated for whole blood samples in terms of platelet deposition/adhesion to a non-biological test surface (tetrafluoroethylene-propylene copolymer), adenosine diphosphate (ADP) release and reduction in platelet count during laminar shear flow for a shear rate...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(93)90009-q
更新日期:1993-09-01 00:00:00
abstract::Liver fibrosis is a major characteristic of liver disease. When the liver is damaged, quiescent hepatic stellate cells (HSCs) transdifferentiate into proliferative myofibroblastic/activated HSCs, which are the main contributors to liver fibrosis. Hence, a strategy for regulating HSC activation is important in the trea...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2019.119375
更新日期:2019-10-01 00:00:00
abstract::In vitro protein adsorption, platelet adhesion and activation on new hydrogel surfaces, composed of poly(ethylene oxide) (PEO) and poly(tetramethylene oxide) (PTMO) or poly(dimethyl siloxane) (PDMS), were investigated. By varying PEO length (MW = 2000 or 3400), hydrophobic components (PTMO or PDMS) or polymer topology...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(01)00306-4
更新日期:2002-04-01 00:00:00
abstract::Calcium phosphate coatings were deposited on titanium plate by an electrochemical method in simulated body fluid at 5-62 degrees C. X-ray diffractometry and FTIR studies demonstrated that the deposits at 5, 22 and 37 degrees C were amorphous and those at 52 and 62 degrees C contained Mg(OH)2, CaCO3 and carbonate apati...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(95)94904-y
更新日期:1995-09-01 00:00:00
abstract::Rapid prototyping is a novel process for the production of scaffolds of predetermined size and three-dimensional shape. The aim of the study was to determine the feasibility of this technology for producing scaffolds for tissue engineering an aortic valve and the optimal concentration of collagen processed in this man...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2005.12.003
更新日期:2006-05-01 00:00:00
abstract::Restoration of tissue integrity and tissue function of wounded skin are both essential for wound repair and regeneration, while synergistic promotion of the two remains elusive. Since elevated reactive oxygen species (ROS) production in the injured site has been implicated in triggering a set of deleterious effects su...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2017.10.018
更新日期:2018-01-01 00:00:00