Abstract:
:The steady increase in online health information seeking by patients is ingrained in central notions of patient-centered care and shared decision-making models reflected in operative dentistry and the healthcare industry at large. More patients today seek health information prior to an appointment, communicate their findings with their providers, and expect two-way communication exchanges. This e-consumer trend has many implications for operative dentistry, for which surgery, by its very nature, lends to a confluence of questioning and informational needs. Operative dentists must acknowledge patient information and be prepared to address the breadth of information brought to them. The purpose of this literature review is threefold: 1) to provide the operative dentist with information about the demographics, psychology, and behavior of today's e-health patient; 2) to provide a review of the benefits and challenges of communicating with e-health patients; and 3) to provide recommendations for communicating with e-patients interpersonally and through Internet communication. In so doing, it is hoped that discussion can provide insight useful for improving provider/patient relationships in the progressive communication era.
journal_name
Oper Dentjournal_title
Operative dentistryauthors
Walker Kdoi
10.2341/14-312-LITsubject
Has Abstractpub_date
2015-09-01 00:00:00pages
451-7issue
5eissn
0361-7734issn
1559-2863journal_volume
40pub_type
杂志文章abstract:OBJECTIVES:This study evaluated the bond strength of luting systems for bonding glass fiber posts to root canal dentin. The hypothesis tested was that there are no differences in bond strength of glass fiber posts luted with different cement systems. METHODS:Forty bovine incisors were randomly assigned to five differe...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/11-035-L
更新日期:2012-01-01 00:00:00
abstract::The purpose of this study was to determine the relationship between the deterioration and the later failure of a very large number of amalgams and anterior resin composites examined over periods of up to 16 years. Assessments were made of the deterioration of various clinical factors or characteristics of the restorat...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1993-07-01 00:00:00
abstract::This study investigated the influence of curing lights and modes on the cross-link density of dental composites. Four LED/halogen curing lights (LED-Elipar Freelight [FL], 3M-ESPE and GC e-light [EL], GC; high intensity halogen-Elipar Trilight [TL], 3M-ESPE; very high intensity halogen-Astralis 10 [AS], Ivoclar Vivade...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2004-07-01 00:00:00
abstract:OBJECTIVE::The study aimed to evaluate teaching trends and use of materials in direct posterior restorations during a 13-year period in an Israeli dental school. METHODS::Data registered in computerized files, relating to posterior restorations performed in the student clinic during the past 13 years (2004-2016), were...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/17-361-C
更新日期:2018-11-01 00:00:00
abstract:AIMS:To evaluate the effect of two composite restorative techniques (direct bulk fill vs indirect CAD/CAM) on the fracture resistance and mode of fracture of extended mesio-occlusal-distal (MOD) cavity preparations. METHODS:Fifty-one sound human mandibular third molars were divided into three groups (n=17). Extended b...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/18-013-L
更新日期:2019-05-01 00:00:00
abstract::Of the many factors under their control, clinicians can manipulate light-exposure duration but must deal with a set intensity of light emitted from the dental curing unit. This research investigates the interdependence of exposure duration and source intensity on resin cure at various depths within a simulated light-c...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1994-01-01 00:00:00
abstract::This study evaluated the influence of ceramic thickness and ceramic materials on fracture resistance of posterior partial coverage ceramic restorations. Forty extracted molars were allocated into four groups (n=10) to test for two variables: 1) the thickness of ceramic (1 mm or 2 mm) and 2) the ceramic materials (a li...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/12-459-L
更新日期:2015-03-01 00:00:00
abstract::This study investigated the effect of a crown-lengthening ferrule on the fracture resistance of endodontically-treated teeth restored with two dowel-core systems. Thirty-two extracted mandibular first premolars were sectioned perpendicular to the long axis at a point 1.0 mm occlusal to the buccal cementoenamel junctio...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/06-169
更新日期:2007-11-01 00:00:00
abstract::This study investigated the effect of conventional and acidified casein phosphopeptide-amorphous calcium phosphate-containing crèmes (CPP-ACP and ACPP-ACP) on dentin permeability (DP) before and after acid challenge, using a fluid-flow measuring device and scanning electron microscopic (SEM) examination. Fifty dentin ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/17-382-L
更新日期:2019-09-01 00:00:00
abstract:OBJECTIVES:The aim of this investigation was to test the tensile bond strength (TBS) between different computer-aided-design/manufacturing (CAD/CAM) ceramics after conditioning using different universal adhesive systems and resin composite cement. METHODS AND MATERIALS:Substrates of four CAD/CAM ceramics-1) VITABLOCS ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/18-017-L
更新日期:2019-07-01 00:00:00
abstract:OBJECTIVES:To evaluate the effect of endodontic access on the failure load resistance of both adhesively and conventionally luted, full-contour monolithic yttria-stabilized zirconium dioxide (Y-TZP) and adhesively luted lithium disilicate (LD) crowns cemented on prepared teeth. METHODS AND MATERIALS:Seventy-two human ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/18-231-L
更新日期:2020-05-01 00:00:00
abstract::Bleaching-induced tooth sensitivity (TS) is highly prevalent. OBJECTIVE:This study aimed to determine if the combination of opioids and nonopioids analgesics (Tylex) may provide a better analgesic effect. METHOD:A triple-blind, parallel, randomized two-center clinical trial was conducted with 105 healthy patients wh...
journal_title:Operative dentistry
pub_type: 杂志文章,多中心研究,随机对照试验
doi:10.2341/17-092-C
更新日期:2018-03-01 00:00:00
abstract:OBJECTIVE:The aim of this study was to evaluate the two-year clinical performance of Class III, IV, and V composite restorations using a two-step etch-and-rinse adhesive system (2-ERA) and three one-step self-etching adhesive systems (1-SEAs). MATERIAL AND METHODS:Two hundred Class III, IV, and V composite restoration...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/11-397-C
更新日期:2013-05-01 00:00:00
abstract::The aim of this study was to compare five all-in-one bonding agents with respect to microleakage, microtensile bond strength (μTBS), degree of conversion (DC) and the impact of cavity configuration. The materials tested were Adper Easy Bond, Clearfil S3 Bond, iBond, Optibond All-in-One, Xeno IV, and Adper Single Bond ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/14-185-LR1
更新日期:2015-09-01 00:00:00
abstract::Most manufacturers of dental adhesives have both a total-etch adhesive and a simplified self-etching adhesive available on the market. This study measured the enamel microtensile bond strengths of five pairs of enamel adhesives as a function of enamel roughness. The proximal surfaces of 25 extracted mandibular molars ...
journal_title:Operative dentistry
pub_type: 临床试验,杂志文章,随机对照试验
doi:
更新日期:2005-07-01 00:00:00
abstract::This study investigated the influence of light energy density (intensity x time) on the effectiveness of composite cure in view of the curing profiles of new light-polymerization units. This investigation used a digital microhardness tester to evaluate the hardness of the top/bottom surfaces and hardness ratio of 2 mm...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2001-09-01 00:00:00
abstract::The aim of the present study was to evaluate the effect of composite resin contamination with powdered and unpowdered latex gloves on the shear bond strength of etch-and-rinse and two-step self-etch adhesive systems. Standard flat dentin surfaces were prepared on the facial aspect of 120 bovine incisors and randomly a...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/11-088-L
更新日期:2012-09-01 00:00:00
abstract:OBJECTIVE:The purpose of this study was to evaluate surface finish and gloss of a two-step composite finishing/polishing (F/P) disc system compared with two multistep systems on five composites. METHODS:Seventy-five disc-shaped composite specimens (D=10.0 mm, 2 mm thick, n=15 per composite) were made of microfill (Dur...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/10-162-L
更新日期:2011-03-01 00:00:00
abstract::The antibacterial effects of the dentin bonding systems Syntac, ProBOND, Gluma 3-Step, the resin-modified glass ionomers Photac-Fil, Fuji Lining LC, Fuji II LC, and the polyacid-modified composite resins VariGlass, Geristore, and Infinity were evaluated using the cariogenic bacteria S mutans, L salivarius, S sobrinus,...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1996-11-01 00:00:00
abstract::The purpose of this study was to evaluate the 1-year results of the dentin bond (DBS)/viscous resin liner combinations Amalgambond Plus, Tenure/Panavia, Syntac/Dual Cem, and All-Bond 2/Liner F in reducing microleakage in class 5 cavity preparations restored with an admixed or a spherical amalgam alloy and to compare t...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1998-01-01 00:00:00
abstract::This in vitro study measured cusp deflection associated with MOD resin composite restorations in maxillary premolars with different curing light modes. Soft-start polymerization may reduce cusp deflection by reducing polymerization shrinkage stress. Forty maxillary premolars were mounted in stone and slot MOD cavities...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:
更新日期:2005-11-01 00:00:00
abstract:INTRODUCTION:Limited access to interdental spaces complicates removal of excess material when placing class II composite resin restorations. Evidence-based recommendations on interproximal finishing are rare. We present novel microscalpels for this indication. The aim of the study was to test their fracture strength an...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/16-012-L
更新日期:2017-05-01 00:00:00
abstract::This study evaluated the effect of two dentin disinfectants (Consepsis, Tubulicid), one aqueous HEMA solution (Aqua Prep), a combination of Aqua Prep and Tubulicid and an air abrasion treatment (50 microns aluminum oxide) on the shear bond strength (SBS) of two acetone-based single bottle adhesives (One Step and Prime...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2001-11-01 00:00:00
abstract::This study investigated the influence of different light sources associated with a transdental photoactivation technique on the marginal adaptation and hardness of composite restorations. Cavities (3 mm wide x 3 mm long x 1.5 mm in deep) were prepared on flattened bovine dentin and filled with Z250 composite (3M ESPE)...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/07-109
更新日期:2008-07-01 00:00:00
abstract::This case report illustrates how to restore severely compromised teeth with direct composite restorations. The size of the restorations presented is often considered by dentists as being a contraindication for direct composites. Hence, the technique is explained step by step, addressing the crucial points. ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/15-001-T
更新日期:2016-09-01 00:00:00
abstract:OBJECTIVES:To evaluate and compare the fracture toughness of dental CAD/CAM materials of different material classes intended for in-office milling (glass ceramics, hybrid, resin composites) and the influence of aging on this property. METHODS AND MATERIALS:The fracture toughness (critical intensity factor, KIc) values...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/18-161-L
更新日期:2019-07-01 00:00:00
abstract::This article reports the case of a patient with bilateral hypodontia of the maxillary lateral incisors who was dissatisfied with the outcome of initial orthodontic treatment, highlighting the importance of a multidisciplinary interaction among Restorative Dentistry, Orthodontics, and Implantology to achieve satisfacto...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/11-167-T
更新日期:2012-09-01 00:00:00
abstract::This study compared the surface finish of eight different types of aesthetic restorative materials. The materials included resin-modified (Fuji II LC [FL], GC) and highly viscous (Fuji IX GP Fast [FN], GC) glass ionomer cements, a compomer (F2000 [FT], 3M-ESPE), minifilled (Z100 [ZO], 3M-ESPE) and microfilled (A110 [A...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2004-01-01 00:00:00
abstract:PURPOSE:This study evaluated the effect of thermocycling on the microtensile bond strength of four adhesive luting agents to GN-I CAD-CAM ceramic. The hypothesis tested was that thermocycling did not affect bonding effectiveness, irrespective of the luting agents used. MATERIALS AND METHODS:Ceramic specimens of two di...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/06-106
更新日期:2007-07-01 00:00:00
abstract:PURPOSE::The purpose of this study was to quantify the relative strength tolerance of 1-day and 30-day amalgam following saturation contamination with water, saliva, blood, and handpiece lubricant oil during condensation. METHODS AND MATERIALS::Valiant PhD XT amalgam was tested with 300 shear-strength (N=15) and 120 c...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/18-091-L
更新日期:2019-03-01 00:00:00