当前位置： SCI文献检索 > JOURNAL OF BIOMECHANICS期刊下所有文献 > Glenohumeral joint cartilage contact in the healthy adult during scapular plane elevation depression with external humeral rotation.

Glenohumeral joint cartilage contact in the healthy adult during scapular plane elevation depression with external humeral rotation.

Abstract：

:The shoulder (glenohumeral) joint has the greatest range of motion of all human joints; as a result, it is particularly vulnerable to dislocation and injury. The ability to non-invasively quantify in-vivo articular cartilage contact patterns of joints has been and remains a difficult biomechanics problem. As a result, little is known about normal in-vivo glenohumeral joint contact patterns or the consequences that surgery has on altering them. In addition, the effect of quantifying glenohumeral joint contact patterns by means of proximity mapping, both with and without cartilage data, is unknown. Therefore, the objectives of this study are to (1) describe a technique for quantifying in-vivo glenohumeral joint contact patterns during dynamic shoulder motion, (2) quantify normal glenohumeral joint contact patterns in the young healthy adult during scapular plane elevation depression with external humeral rotation, and (3) compare glenohumeral joint contact patterns determined both with and without articular cartilage data. Our results show that the inclusion of articular cartilage data when quantifying in-vivo glenohumeral joint contact patterns has significant effects on the anterior-posterior contact centroid location, the superior-inferior contact centroid range of travel, and the total contact path length. As a result, our technique offers an advantage over glenohumeral joint contact pattern measurement techniques that neglect articular cartilage data. Likewise, this technique may be more sensitive than traditional 6-Degree-of-Freedom (6-DOF) joint kinematics for the assessment of overall glenohumeral joint health. Lastly, for the shoulder motion tested, we found that glenohumeral joint contact was located on the anterior-inferior glenoid surface.

journal_name

J Biomech

journal_title

Journal of biomechanics

authors

Massimini DF,Warner JJ,Li G

doi

10.1016/j.jbiomech.2014.06.034

subject

Has Abstract

pub_date

2014-09-22 00:00:00

pages

3100-6

issue

12

eissn

0021-9290

issn

1873-2380

pii

S0021-9290(14)00373-X

journal_volume

47

pub_type

杂志文章

相关文献

JOURNAL OF BIOMECHANICS文献大全
  • Tensile stress-strain characteristics of the human meniscal material.

    abstract：:The nonlinear stress-strain characteristics of the human menisci were determined by uniaxial elongation tests performed on circumferential and radial specimens prepared from different regions, layers, and locations. The properties of the collagen fibers and the matrix were calculated using the test results along with ...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/0021-9290(94)00081-e

    authors： Tissakht M,Ahmed AM

    更新日期：1995-04-01 00:00:00

  • Membrane permeability during pressure ulcer formation: A computational model of dynamic competition between cytoskeletal damage and repair.

    abstract：:Pressure ulcers are debilitating wounds that arise frequently in people who have lost mobility. Mechanical stress, oxidative stress and ischemia-reperfusion injury are potential sources of damage during pressure ulcer formation, but cross-talk between these sources has rarely been investigated. In vitro experiments wi...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2015.12.022

    authors： Jagannathan NS,Tucker-Kellogg L

    更新日期：2016-05-24 00:00:00

  • Numerical modelling of mass transport in an arterial wall with anisotropic transport properties.

    abstract：:Coronary artery disease results in blockages or narrowing of the artery lumen. Drug eluting stents (DES) were developed to replace bare metal stents in an effort to combat re-blocking of the diseased artery following treatment. The numerical models developed within this study focus on representing the changing trends ...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2013.09.017

    authors： Denny WJ,Walsh MT

    更新日期：2014-01-03 00:00:00

  • Ultrasound strain mapping of Achilles tendon compressive strain patterns during dorsiflexion.

    abstract：:Heel lifts are commonly prescribed to patients with Achilles tendinopathy, yet little is known about the effect on tendon compressive strain. The purposes of the current study were to (1) develop a valid and reliable ultrasound elastography technique and algorithm to measure compressive strain of human Achilles tendon...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2015.11.008

    authors： Chimenti RL,Flemister AS,Ketz J,Bucklin M,Buckley MR,Richards MS

    更新日期：2016-01-04 00:00:00

  • Friction-induced whirl vibration: root cause of squeaking in total hip arthroplasty.

    abstract：:Squeaking is reported for ceramic-on-ceramic hip arthroplasty, and risk factors leading to this phenomenon have been investigated empirically in the past, this way giving hints to when this phenomenon occurs. The aim of this study is to present an experimentally validated explanation for the dynamical mechanism underl...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2011.10.025

    authors： Weiss C,Hothan A,Huber G,Morlock MM,Hoffmann NP

    更新日期：2012-01-10 00:00:00

  • Effect of the "squat protective response" on impact velocity during backward falls.

    abstract：:Risk for injury during a fall depends on the position and velocity of the body segments at the moment of impact. One technique for reducing impact velocity is to absorb energy in the lower extremity muscles during descent, as occurs during squatting or sitting. However, the protective value of this response may depend...

    journal_title：Journal of biomechanics

    pub_type： 临床试验,杂志文章

    doi：10.1016/j.jbiomech.2003.12.015

    authors： Robinovitch SN,Brumer R,Maurer J

    更新日期：2004-09-01 00:00:00

  • Assessment of blood volume flow in slightly curved arteries from a single velocity profile.

    abstract：:Non-invasive estimation of arterial blood volume flow (BVF) has become a central issue in assessment of cardiovascular risk. Poiseuille and Womersley approaches are commonly used to assess the BVF from centerline velocity, but both methods neglect the influence of curvature. Based on the assumption that the velocity i...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2009.04.032

    authors： Leguy CA,Bosboom EM,Hoeks AP,van de Vosse FN

    更新日期：2009-08-07 00:00:00

  • Experimental validation of a time-domain-based wave propagation model of blood flow in viscoelastic vessels.

    abstract：:Time-domain-based one-dimensional wave propagation models of the arterial system are preferable over one-dimensional wave propagation models in the frequency domain since the latter neglect the non-linear convection forces present in the physiological situation, especially when the vessel is tapered. Moreover, one-dim...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2007.09.014

    authors： Bessems D,Giannopapa CG,Rutten MC,van de Vosse FN

    更新日期：2008-01-01 00:00:00

  • In vivo porcine left atrial wall stress: Effect of ventricular tachypacing on spatial and temporal stress distribution.

    abstract：:Animal models of ventricular tachypacing (VTP) have been successfully used to reproduce the relevant features observed in patients with atrial fibrillation, such as increased atrial pressure and volume, ion-channel alterations and fibrosis. After performing VTP on a healthy Yorkshire pig, we measured an increase in vo...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2011.09.003

    authors： Di Martino ES,Bellini C,Schwartzman DS

    更新日期：2011-11-10 00:00:00

  • Mechanical properties of double-stranded DNA biolayers immobilized on microcantilever under axial compression.

    abstract：:In label-free biodetections based on microcantilever technology, double-stranded DNA (dsDNA) structures form through the linkage between probe single-stranded DNA (ssDNA) molecules immobilized on solid substrates and target ssDNA molecules in solutions. Mechanical/electrical properties of these biolayers are important...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2009.03.050

    authors： Zhang NH,Chen JZ

    更新日期：2009-07-22 00:00:00

  • The development of an improved physical surrogate model of the human spinal cord--tension and transverse compression.

    abstract：:To prevent spinal cord injury, optimize treatments for it, and better understand spinal cord pathologies such as spondylotic myelopathy, the interaction between the spinal column and the spinal cord during injury and pathology must be understood. The spinal cord is a complex and very soft tissue that changes propertie...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2009.01.036

    authors： Kroeker SG,Morley PL,Jones CF,Bilston LE,Cripton PA

    更新日期：2009-05-11 00:00:00

  • Explaining Parkinsonian postural sway variabilities using intermittent control theory.

    abstract：:Postural impairment due to neuro-degenerative disorders such as Parkinson's Disease (PD) leads to restricted gait patterns, fall-related injuries, decreased mobility, and loss of functional independence. Though several clinical and posturographic studies have attempted to reveal the complex pathophysiology involved in...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2020.109791

    authors： Dash R,Shah VV,Palanthandalam-Madapusi HJ

    更新日期：2020-05-22 00:00:00

  • Micropipette aspiration method for characterizing biological materials with surface energy.

    abstract：:Many soft biological tissues possess a considerable surface stress, which plays a significant role in their biophysical functions, but most previous methods for characterizing their mechanical properties have neglected the effects of surface stress. In this work, we investigate the micropipette aspiration method to me...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2018.08.020

    authors： Ding Y,Wang GF,Feng XQ,Yu SW

    更新日期：2018-10-26 00:00:00

  • Towards the modelling of ageing and atherosclerosis effects in ApoE(-/-) mice aortic tissue.

    abstract：:The goal of this work consists in a quantitative analysis and constitutive modelling of ageing processes associated to plaque formation in mice arteries. Reliable information on the characteristic evolution of pressure-stretch curves due to the ageing effects is extracted from previous inflation test experiments. Furt...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2016.01.043

    authors： Waffenschmidt T,Cilla M,Sáez P,Pérez MM,Martínez MA,Menzel A,Peña E

    更新日期：2016-08-16 00:00:00

  • Fluid load support during localized indentation of cartilage with a spherical probe.

    abstract：:Interstitial fluid pressurization, a consequence of a biphasic tissue structure, is essential to the load bearing and lubrication properties of articular cartilage. Focal tissue degradation may interfere with this protective mechanism, eventually leading to gross degeneration and osteoarthritis. Our long-term goal is ...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2011.12.019

    authors： Bonnevie ED,Baro VJ,Wang L,Burris DL

    更新日期：2012-04-05 00:00:00

  • Parametric and subject-specific finite element modelling of the lower cervical spine. Influence of geometrical parameters on the motion patterns.

    abstract：:Morphometrical and postural features of the cervical spine are supposed to significantly influence its biomechanical behaviour. However, the effects of these geometrical parameters are quite difficult to evaluate. An original numerical method is proposed in order to automatically generate parametric and subject-specif...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2009.04.007

    authors： Laville A,Laporte S,Skalli W

    更新日期：2009-07-22 00:00:00

  • Effect of flow pulsatility on modeling the hemodynamics in the total cavopulmonary connection.

    abstract：:Total cavopulmonary connection is the result of a series of palliative surgical repairs performed on patients with single ventricle heart defects. The resulting anatomy has complex and unsteady hemodynamics characterized by flow mixing and flow separation. Although varying degrees of flow pulsatility have been observe...

    journal_title：Journal of biomechanics

    pub_type： 临床试验,杂志文章,多中心研究

    doi：10.1016/j.jbiomech.2012.07.010

    authors： Khiabani RH,Restrepo M,Tang E,De Zélicourt D,Sotiropoulos F,Fogel M,Yoganathan AP

    更新日期：2012-09-21 00:00:00

  • Study on modelling of PMMA bone cement polymerisation.

    abstract：:This contribution is concerned with the modelling of PMMA-based bone cement polymerisation process and the associated heat effect. While existing models use description in terms of the so-called polymerisation fraction to fit the experimental data, the new model is constructed in such a way as to mimic the chemical pr...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2004.06.021

    authors： Stańczyk M

    更新日期：2005-07-01 00:00:00

  • A survey of micro-finite element analysis for clinical assessment of bone strength: the first decade.

    abstract：:Micro-Finite Element (micro-FE) analysis is now widely used in biomedical research as a tool to derive bone mechanical properties as they relate to its microstructure. With the development of in vivo high-resolution peripheral quantitative CT (HR-pQCT) scanners, it can now be applied to analyze bone in-vivo in the per...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2014.12.024

    authors： van Rietbergen B,Ito K

    更新日期：2015-03-18 00:00:00

  • Versatile and inexpensive Hall-Effect force sensor for mechanical characterization of soft biological materials.

    abstract：:Mismatch of hierarchical structure and mechanical properties between tissue-engineered implants and native tissue may result in signal cues that negatively impact repair and remodeling. With bottom-up tissue engineering approaches, designing tissue components with proper microscale mechanical properties is crucial to ...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2016.11.065

    authors： Backman DE,LeSavage BL,Wong JY

    更新日期：2017-01-25 00:00:00

  • A comparison of convergent and bi-plane X-ray photogrammetry systems used to detect total joint loosening.

    abstract：:X-ray photogrammetry is an accurate method of measuring structural displacements within the musculoskeletal system. Total joint implant alignment, migration and loosening are important clinical parameters which can be measured by X-ray photogrammetry. The purpose of this paper is to compare two different X-ray photogr...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/0021-9290(82)90022-7

    authors： Lippert FG 3rd,Harrington RM,Veress SA,Fraser C,Green D,Bahniuk E

    更新日期：1982-01-01 00:00:00

  • Application of singular spectrum analysis to the smoothing of raw kinematic signals.

    abstract：:Motion capture systems currently used in biomechanical analysis introduce systematic measurement errors that appear in the form of noise in recorded displacement signals. The noise is unacceptably amplified when differentiating displacements to obtain velocities and accelerations. To avoid this phenomenon, it is neces...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2004.05.031

    authors： Alonso FJ,Castillo JM,Pintado P

    更新日期：2005-05-01 00:00:00

  • Fluid flow in bone in vitro.

    abstract：:Recent dielectric measurements suggest that the electromechanical effect in wet (fluid saturated) bone is not due to a piezoelectric effect. This would imply that the electromechanical effect observed in wet bone is due to a streaming potential and is therefore dependent on fluid flow in stressed bone. A model for flu...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/0021-9290(82)90054-9

    authors： Johnson MW,Chakkalakal DA,Harper RA,Katz JL,Rouhana SW

    更新日期：1982-01-01 00:00:00

  • Validation of computational fluid dynamics methodology used for human upper airway flow simulations.

    abstract：:An anatomically accurate human upper airway model was constructed from multiple magnetic resonance imaging axial scans. This model was used to conduct detailed Computational Fluid Dynamics (CFD) simulations during expiration, to investigate the fluid flow in the airway regions where obstruction could occur. An identic...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2009.03.035

    authors： Mylavarapu G,Murugappan S,Mihaescu M,Kalra M,Khosla S,Gutmark E

    更新日期：2009-07-22 00:00:00

  • Stepping over an obstacle increases the motions and moments of the joints of the trailing limb in young adults.

    abstract：:Tripping over obstacles is the most frequently mentioned causes of falls. Thus, this study was performed to test the hypotheses that when crossing obstacles, toe-obstacle clearance and the three-dimensional motions and moments at the hip, knee, and ankle of the trailing limb (limb crossing the obstacle last) increase ...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/s0021-9290(96)00161-3

    authors： Chou LS,Draganich LF

    更新日期：1997-04-01 00:00:00

  • A mathematical model to investigate the effects of intravenous fluid administration and fluid loss.

    abstract：:The optimal fluid administration protocol for critically ill perioperative patients is hard to estimate due to the lack of tools to directly measure the patient fluid status. This results in the suboptimal clinical outcome of interventions. Previously developed predictive mathematical models focus on describing the fl...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2019.03.002

    authors： Rosalina TT,Bouwman RA,van Sambeek MRHM,van de Vosse FN,Bovendeerd PHM

    更新日期：2019-05-09 00:00:00

  • Finite element models predict cancellous apparent modulus when tissue modulus is scaled from specimen CT-attenuation.

    abstract：:High-resolution architecture-based finite element models are commonly used for characterizing the mechanical behavior of cancellous bone. The vast majority of studies use homogeneous material properties to model trabecular tissue. The objectives of this study were to demonstrate that inhomogeneous finite element model...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2003.10.002

    authors： Bourne BC,van der Meulen MC

    更新日期：2004-05-01 00:00:00

  • A Hill type model of rat medial gastrocnemius muscle that accounts for shortening history effects.

    abstract：:The aim of the present study was to develop a Hill type muscle model that accounts for the effects of shortening history. For this purpose, a function was derived that relates force depression to starting length, shortening amplitude and contraction velocity. History parameters were determined from short-range isokine...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/s0021-9290(98)00048-7

    authors： Meijer K,Grootenboer HJ,Koopman HF,van der Linden BJ,Huijing PA

    更新日期：1998-06-01 00:00:00

  • Three-dimensional intervertebral kinematics in the healthy young adult cervical spine during dynamic functional loading.

    abstract：:The objective of this study was to determine the intervertebral kinematics of the young, healthy cervical spine during dynamic, three-dimensional, functional loading. Intervertebral motion was characterized by the range of motion (ROM) and the helical axis of motion (HAM). Biplane radiographs of the cervical spine wer...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/j.jbiomech.2015.02.049

    authors： Anderst WJ,Donaldson WF 3rd,Lee JY,Kang JD

    更新日期：2015-05-01 00:00:00

  • Model of muscle-tendon interaction during frog semitendinosis fixed-end contractions.

    abstract：:A structural model was developed to explain sarcomere shortening at the expense of tendon lengthening in the frog semitendinosis (ST) muscle-tendon system. The model was based on the data of Lieber et al. [Am. J. Physiol. 261, C86-C92 (1991)], who determined the relationship between the sarcomere length, tendon load (...

    journal_title：Journal of biomechanics

    pub_type： 杂志文章

    doi：10.1016/0021-9290(92)90261-x

    authors： Lieber RL,Brown CG,Trestik CL

    更新日期：1992-04-01 00:00:00