Abstract：
:Squeaking is reported for ceramic-on-ceramic hip arthroplasty, and risk factors leading to this phenomenon have been investigated empirically in the past, this way giving hints to when this phenomenon occurs. The aim of this study is to present an experimentally validated explanation for the dynamical mechanism underlying the squeak, i.e. a description of what happens when noise is generated. First the kinematics of the ceramic bearing couple in relative motion are reconsidered. The relative motion at the contact zone can be understood as superposition of relative rotation and translation. The relative weight of both components depends substantially on the instantaneous load vector, which primarily determines the position of the contact area, and the instantaneous relative rotation vector. For the investigated gait scenarios, both load vector and rotation axis vary strongly during the gait cycle. Second, experimental vibration analysis during squeak is performed. A pronounced micrometer scale elliptical motion of the ball inside the liner is found. It is shown that the rotational component of the relative kinematics during gait indeed leads to friction induced vibrations. We show that a generic whirl type friction induced flutter instability, also known from similar (non bio-) mechanical systems, is the root cause of the emitted squeaking noise. Based on the identified mechanism, the role of THA system parameters (materials, design), patient risk factors, as well as the role of the gait cycle, will have to be reconsidered and linked in the future to develop effective measures against squeaking.
journal_name
J Biomechjournal_title
Journal of biomechanicsauthors
Weiss C,Hothan A,Huber G,Morlock MM,Hoffmann NPdoi
10.1016/j.jbiomech.2011.10.025subject
Has Abstractpub_date
2012-01-10 00:00:00pages
297-303issue
2eissn
0021-9290issn
1873-2380pii
S0021-9290(11)00667-1journal_volume
45pub_type
杂志文章abstract：:There appears a linear relationship between small increases in running speed and cardiovascular health benefits. Encouraging or coaching recreational runners to increase their running speed to derive these health benefits might be more effective if their joint level kinematic and kinetic strategy was understood. The a...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2018.02.010
更新日期：2018-04-11 00:00:00
abstract：:There are many diseases which cause detrimental changes in the trabecular structure of cancellous bone, leading to mechanical failure of the tissue. One approach to understanding the mechanisms of these diseases is to create idealized models that recreate the morphology of the tissue. This paper presents a partial dev...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(93)90057-l
更新日期：1993-08-01 00:00:00
abstract：:Perturbed aorta hemodynamics, as for the carotid and the coronary artery, has been identified as potential predicting factor for cardiovascular diseases. In this study, we propose a parametric study based on the computational fluid dynamics with the aim of providing information regarding aortic disease. In particular,...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2020.109691
更新日期：2020-04-16 00:00:00
abstract：:The purpose of the study was to evaluate the rates of change in the estimated masses and principal moments of inertia of the body segments during the second and third trimesters of pregnancy. Fifteen subjects, on average 15.1 weeks pregnant, were tested monthly until term. The body was modelled as 16 segments consisti...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(95)00042-9
更新日期：1996-02-01 00:00:00
abstract：:In order to move the finger the tendon force must overcome the gliding resistance of the tendon as well as the forces to move the joints, finger inertias, and external load. These sources, combined, make up the work of flexion (WOF) which has been experimentally used to evaluate the finger function. In this study, we ...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/s0021-9290(02)00300-7
更新日期：2003-02-01 00:00:00
abstract：:Side-cutting is commonly used to evaluate knee joint kinematics and kinetics in the context of anterior cruciate ligament injury risk. Many existing side-cutting studies fail to clearly define the orientation of the femoral frame and the knee axis, making comparisons between studies difficult. A femoral frame construc...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2012.05.017
更新日期：2012-07-26 00:00:00
abstract：:Mechanical adaptions of cells, including stiffness variation, cytoskeleton remodeling, motion coordination, and shape changing, are essential for tissue morphogenesis, wound healing, and malignant progression. In this paper, we take confluent monolayers of Madin-Darby canine kidney (MDCK) and mouse myoblast (C2C12) ce...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2020.109763
更新日期：2020-05-07 00:00:00
abstract：:Current clinical practice lacks an accurate predictor for the pathological fracture risk in metastatic bone disease, but biomechanical tools are under development to improve these predictions. In this paper we explain the limitations of currently used clinical guidelines and provide an overview of more objective and q...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2014.12.017
更新日期：2015-03-18 00:00:00
abstract：:To quantify limb dynamics, accurate estimates are needed of anthropometric inertia parameters (mass, center-of-mass location, and moments of inertia). These estimates, however, are not available for human infants; therefore, the movement dynamics of infants have not been studied extensively. Here, regression equations...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(92)90271-2
更新日期：1992-02-01 00:00:00
abstract：:Spinal stability is related to the recruitment and control of active muscle stiffness. Stochastic system identification techniques were used to calculate the effective stiffness and dynamics of the trunk during active trunk extension exertions. Twenty-one healthy adult subjects (10 males, 11 females) wore a harness wi...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2004.09.014
更新日期：2005-10-01 00:00:00
abstract：:Continuous flow blood fraction separators are used to facilitate the removal of specific blood components for donation or for certain medical procedures. Problems with one such device, the IBM 2997 Blood Processor, have been noted in a number of independent investigations. A key feature of this particular unit is a ce...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(86)90163-6
更新日期：1986-01-01 00:00:00
abstract：:A technique is introduced for simultaneous measurements of the heel pad tissue deformation and the heel-ground contact stresses developing during the stance phase of gait. Subjects walked upon a gait platform integrating the contact pressure display optical method for plantar pressure measurements and a digital radiog...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/s0021-9290(01)00143-9
更新日期：2001-12-01 00:00:00
abstract：:Mechanical properties of abdominal and thoracic arteries of 2mm in diameter were determined from adults Wistar rats. A tensile testing instrument was used to obtain stress/strain curves with arteries immersed in physiological buffer at 37 degrees C. A displacement was applied on all arteries with various frequencies (...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2008.04.017
更新日期：2008-07-19 00:00:00
abstract：:The aim of this work is to specify which model of turbulence is the most adapted in order to predict the drag forces that a swimmer encounters during his movement in the fluid environment. For this, a Computational Fluid Dynamics (CFD) analysis has been undertaken with a commercial CFD code (Fluent). The problem was m...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2009.10.010
更新日期：2010-02-10 00:00:00
abstract：:Anchorage of pedicle screw instrumentation in the elderly spine with poor bone quality remains challenging. In this study, micro finite element (µFE) models were used to assess the specific influence of screw design and the relative contribution of local bone density to fixation mechanics. These were created from micr...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2017.12.023
更新日期：2018-03-21 00:00:00
abstract：:To enhance the wearability of portable motion-monitoring devices, the size and number of sensors are minimized, but at the expense of quality and quantity of data collected. For example, owing to the size and weight of low-frequency force transducers, most currently available wearable gait measurement systems provide ...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2018.01.046
更新日期：2018-04-11 00:00:00
abstract：:Multiscale models of cortical bone elasticity require a large number of parameters to describe the organization and composition of the tissue. We hypothesize that the macro-scale anisotropic elastic properties of different bones can be modeled retaining only two variable parameters, and setting the others to universal...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2011.03.006
更新日期：2011-05-17 00:00:00
abstract：:Many analytical biomechanics methods require extensive three-dimensional descriptions of anatomical geometry. In particular, researchers requiring the three-dimensional coordinates of specific boney landmarks (e.g. tendon and ligament attachments) are often forced to extrapolate such measurements from an experimental ...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(82)90249-4
更新日期：1982-01-01 00:00:00
abstract：:The surface roughness of a bone implant was defined parametrically. The values of the parameters defining the surface were varied. Some traditionally used surface roughness parameters were calculated. By means of a theoretical model the bone-implant interfacial shear strength was estimated. No simple correlation betwe...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/s0021-9290(00)00045-2
更新日期：2000-10-01 00:00:00
abstract：:We propose a numerical model of hemodynamics arising from malaria infection. This model is based on a particle method, where all the components of blood are represented by the finite number of particles. A two-dimensional spring network of membrane particles is employed for expressing the deformation of malaria infect...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2010.01.011
更新日期：2010-05-07 00:00:00
abstract：:Radiostereometric analysis (RSA) has become one of the recommended techniques for pre-market evaluation of new joint implant designs. In this study we evaluated the effect of repositioning of X-ray tubes and phantom model on the precision of the RSA method. In precision measurements, we utilized mean error of rigid bo...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2003.09.004
更新日期：2004-04-01 00:00:00
abstract：:To evaluate the efficacy of implanting a tilting disc aortic valve prosthesis in an angulated (wedged) supra-annular position, an in vitro experimental study was performed. The aortic valve prosthesis was mounted in an axi-symmetric valve chamber in a wedged position and incorporated in a mock circulatory system. Meas...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(86)90150-8
更新日期：1986-01-01 00:00:00
abstract：:Given the complex three-dimensional (3D) knee joint loading associated with anterior cruciate ligament (ACL) injuries, accurate site- and bundle-specific strain measurements are critical. The purpose of this study was to quantify tensile load-induced migrations of radio-opaque markers injected directly into the ACL, a...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2012.08.016
更新日期：2012-10-11 00:00:00
abstract：:Previous studies on cats walking backward have indicated that they adopt a presumably adaptive posture characterized by extreme dorsiflexion of the lumbar spine. Because humans do not show any marked postural changes during backward walking, we questioned whether the posture exhibited by cats during backward walking w...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/s0021-9290(00)00071-3
更新日期：2000-08-01 00:00:00
abstract：:The purpose of this study was to examine the relationship between internal force production in selected skeletal muscles and the externally calculated joint moment during overground locomotion in the adult cat. Hindlimb segments were modelled as a linked system of rigid bodies and a generalized muscle moment (GMM), th...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(93)90010-c
更新日期：1993-04-01 00:00:00
abstract：:The successful development of early-stage cartilage and meniscus repair interventions in the knee requires biomechanical and biotribological understanding of the design of the therapeutic interventions and their tribological function in the natural joint. The aim of this study was to develop and validate a porcine kne...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2015.07.043
更新日期：2015-09-18 00:00:00
abstract：:A model is developed in which osteoblasts can sense the strains applied to a small region of bone through electrical coupling between adjacent cells. The stress-generated potentials within bone are assumed to occur through streaming potentials, and the coupled network of osteocytes is assumed to act in a manner simila...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(93)90048-j
更新日期：1993-02-01 00:00:00
abstract：:Diurnal disc height changes, due to fluid in- and outflow, are in equilibrium while daytime spinal loading is twice as long as night time rest. A direction-dependent permeability of the endplates, favouring inflow over outflow, reportedly explains this; however, fluid flow through the annulus fibrosus should be consid...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2015.11.041
更新日期：2016-04-11 00:00:00
abstract：:An axisymmetric finite element model of a body-disc-body unit has been developed and used to study the relative effects of two distinct direction-dependent material representations of the disc annulus on the predicted state of stresses in the disc. The annulus fibrosus is modelled either as nonhomogeneous fibre reinfo...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(89)90050-x
更新日期：1989-01-01 00:00:00
abstract：:Upper extremity musculoskeletal disorders represent an important health issue across all industry sectors; as such, the need exists to develop models of the hand that provide comprehensive biomechanics during occupational tasks. Previous optical motion capture studies used a single marker on the dorsal aspect of finge...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2011.04.003
更新日期：2011-06-03 00:00:00
