Abstract：
:An axisymmetric finite element model of a body-disc-body unit has been developed and used to study the relative effects of two distinct direction-dependent material representations of the disc annulus on the predicted state of stresses in the disc. The annulus fibrosus is modelled either as nonhomogeneous fibre reinforced composite or alternatively as homogeneous orthotropic with transverse isotropy. In order to have identical states of displacements and hence strains, the unknown properties of the latter model are chosen to be equivalent with those of the former. The fibre slopes of 20 degrees, 30 degrees, and 40 degrees are considered in this study. The stresses in the annulus matrix in the circumferential planes parallel to the fibre layers are predicted to be significantly different depending on the annulus model used. In the nonhomogeneous model, the fibre membranes while under tensile forces, in turn, apply compression to the annulus matrix and, hence, decrease the annulus normal stresses in the above planes. Had the membranes carried compressive forces, a reverse trend would have resulted. The foregoing relative differences are dependent on the fibre orientation, and the magnitude of the tensile forces carried by the fibre layers. The latter also depends, amongst others, on the orientation of the fibres, decreasing as the fibre slope increases from 20 degrees to 30 degrees and 40 degrees. On the basis of the annulus micro-structure and the relative mechanical functions of its components, namely the annulus bulk and the collagenous fibre layers, it appears that nonhomogeneous fibre reinforced composite model of the disc annulus is more realistic resulting in a more accurate computation of stresses in the annulus fibrosus.
journal_name
J Biomechjournal_title
Journal of biomechanicsauthors
Shirazi-Adl Adoi
10.1016/0021-9290(89)90050-xsubject
Has Abstractpub_date
1989-01-01 00:00:00pages
357-65issue
4eissn
0021-9290issn
1873-2380pii
0021-9290(89)90050-Xjournal_volume
22pub_type
杂志文章abstract：:A more fundamental understanding about the act of manual lifting can be provided by the assessment of the total production of power and the power generated in joints. The present study is concerned with the validity of the estimations of these parameters. Four subjects lifted an 18.8 kg load while they were filmed and...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(92)90045-3
更新日期：1992-09-01 00:00:00
abstract：:We evaluated whether the use of cartilage thickness measurement would improve the ability of the arthroscopic indentation technique to estimate the intrinsic stiffness of articular cartilage. First, cartilage thickness and ultrasound reflection from the surface of bovine humeral head were registered in situ using a hi...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/s0021-9290(00)00189-5
更新日期：2001-02-01 00:00:00
abstract：:This paper presents a general method for simulating the movement of the lower extremity during human walking. It is based upon two separate algorithms: one for single support (an open kinematic chain), and the other for the double support phase (a closed-loop linkage). Central to each of these is the recursive Newton-...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(88)90250-3
更新日期：1988-01-01 00:00:00
abstract：:Falls due to slipping are a serious concern, with slipping estimated to cause 40-50% of all fall-related injuries. Epidemiological data indicates that older and obese adults experience more falls than young, non-obese individuals. An increasingly heavier and older U.S. population and workforce may be exacerbating the ...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2016.01.018
更新日期：2016-03-21 00:00:00
abstract：:Arterial wall function is associated with different physiological and clinical factors. Changes in arterial pressure cause major changes in the arterial wall. This study presents a simple non-invasive method to quantify arterial volume distensibility changes with different arterial pressures. The electrocardiogram, fi...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2009.02.011
更新日期：2009-05-29 00:00:00
abstract：:Recent dielectric measurements suggest that the electromechanical effect in wet (fluid saturated) bone is not due to a piezoelectric effect. This would imply that the electromechanical effect observed in wet bone is due to a streaming potential and is therefore dependent on fluid flow in stressed bone. A model for flu...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(82)90054-9
更新日期：1982-01-01 00:00:00
abstract：:The purpose of this study was to compare the forces and moments of the whole upper limb, analyzing forces and moments at the shoulder, elbow and wrist joints simultaneously during manual wheelchair propulsion of persons with different levels of spinal cord injury (SCI) on a treadmill. Fifty-one people participated in ...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2010.05.021
更新日期：2010-09-17 00:00:00
abstract：:This study reports for the first time an estimation of the internal net joint forces and torques on adults' lower limbs and pelvis when walking in shallow water, taking into account the drag forces generated by the movement of their bodies in the water and the equivalent data when they walk on land. A force plate and ...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2011.01.017
更新日期：2011-04-07 00:00:00
abstract：:Fibroblasts in intact tendons align with stretching direction, but they tend to orient randomly in healing tendons. Therefore, a question arises: Do fibroblast responses to mechanical stretching depend on their orientation? To address this question, human patellar tendon fibroblasts were grown in custom-made silicone ...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2003.09.011
更新日期：2004-04-01 00:00:00
abstract：:The aim of this work is to contribute to elucidating the mechanism underlying gas mixing in the human pulmonary airways. For this purpose, a particular attempt is made to analyse the fluid mechanical aspects of gaseous dispersion using bolus response methods. The experiments were performed on five normal subjects by i...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(85)90295-7
更新日期：1985-01-01 00:00:00
abstract：:The fluid-structure interaction and energy transfer from respiratory airflow to self-sustained vocal fold oscillation continues to be a topic of interest in vocal fold research. Vocal fold vibration is driven by pressures on the vocal fold surface, which are determined by the shape of the glottis and the contact betwe...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2018.04.011
更新日期：2018-05-17 00:00:00
abstract：:The clinical relevance of mechanical testing studies of cadaveric human thoracic spines could be enhanced by using follower preload techniques, by including the intact rib cage, and by measuring thoracic intervertebral disc pressures, but studies to date have not incorporated all of these components simultaneously. Th...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2016.02.038
更新日期：2016-05-03 00:00:00
abstract：:Healthy patellofemoral (PF) joint mechanics are critical to optimal function of the knee joint. Patellar maltracking may lead to large joint reaction loads and high stresses on the articular cartilage, increasing the risk of cartilage wear and the onset of osteoarthritis. While the mechanical sources of PF joint dysfu...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2015.12.020
更新日期：2016-01-25 00:00:00
abstract：:In this study, a theoretical framework for simulation of fracture of bone and bone-like materials is provided. An expanded cohesive zone model with thermodynamically consistent framework has been proposed and used to investigate the crack growth resistance of bone and bone-like materials. The reversible elastic deform...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2014.04.054
更新日期：2014-07-18 00:00:00
abstract：:The paper analyzes the connection between microstructure of the osteonal cortical bone and its overall elastic properties. The existing models either neglect anisotropy of the dense tissue or simplify cortical bone microstructure (accounting for Haversian canals only). These simplifications (related mostly to insuffic...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2014.08.019
更新日期：2014-10-17 00:00:00
abstract：:We recently demonstrated that a set of five functional muscle synergies were sufficient to characterize both hindlimb muscle activity and active forces during automatic postural responses in cats standing at multiple postural configurations. This characterization depended critically upon the assumption that the endpoi...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2007.09.012
更新日期：2008-01-01 00:00:00
abstract：:This study was aimed at investigating the intersegmental coordination of six older adults while managing unexpected slippages delivered during steady walking, and wearing an Active Pelvis Orthosis (APO). The APO was setup either to assist volunteers at the hip levels during balance loss or to be transparent. The Plana...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2019.01.003
更新日期：2019-03-06 00:00:00
abstract：:A new software tool to assign the material properties of bone to an ABAQUS finite element mesh was created and compared with Bonemat, a similar tool originally designed to work with Ansys finite element models. Our software tool (py_bonemat_abaqus) was written in Python, which is the chosen scripting language for ABAQ...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2016.07.037
更新日期：2016-09-06 00:00:00
abstract：:The primary aim of this work is to investigate the potential of nonlinear ultrasound for microdamage detection in human bone. Microdamage evaluation in human bone is of great importance, because it is considered a significant parameter for characterizing fracture risk. Experiments employing nonlinear acoustic vibro-mo...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2008.12.018
更新日期：2009-03-26 00:00:00
abstract：:Mechanical adaptions of cells, including stiffness variation, cytoskeleton remodeling, motion coordination, and shape changing, are essential for tissue morphogenesis, wound healing, and malignant progression. In this paper, we take confluent monolayers of Madin-Darby canine kidney (MDCK) and mouse myoblast (C2C12) ce...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2020.109763
更新日期：2020-05-07 00:00:00
abstract：:Nowadays in various daily, occupational and training activities, there are many occasions with forces supported in hands acting at various magnitudes, elevations, and orientations with substantial horizontal components. In this work, we aim to compute trunk muscle forces, stability, and spinal loads under pulling exte...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2015.09.036
更新日期：2016-04-11 00:00:00
abstract：:Incomplete stent apposition (ISA, also known as malapposition) is a complication that affects day-to-day coronary stenting procedures. ISA is more prominent in complex arterial geometries, such as curvature, asa result of the limited conformability of coronary stents. These malapposed struts disturb the otherwise near...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2017.09.016
更新日期：2017-10-03 00:00:00
abstract：:A composite cushion acetabular cup for a total hip replacement has been designed and developed jointly by Leeds University and DePuy International. In order to assess the long-term performance of this novel design, two sets of simulator tests of more than 4 million cycles duration have been carried out with the cushio...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/s0021-9290(98)00034-7
更新日期：1998-04-01 00:00:00
abstract：:Shorter generation time and the power of genetic manipulation make mice an ideal model system to study bone biology as well as bone diseases. However their small size presents a challenge to perform strength measurements, particularly of the weight-bearing cancellous bone in the murine long bones. We recently develope...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2016.02.040
更新日期：2016-05-03 00:00:00
abstract：:The purpose of this study was to test the hypothesis that the musculotendon moment arm length is affected by the muscle anatomical cross-sectional area. The moment arm length of the triceps brachii (TB) muscle at 30°, 50°, 70°, 90°, 110° elbow flexion positions was measured in sagittal magnetic resonance images (MRI) ...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2010.06.013
更新日期：2010-10-19 00:00:00
abstract：:Fixation failure of glenoid components is the main cause of unsuccessful total shoulder arthroplasties. The characteristics of these failures are still not well understood, hence, attempts at improving the implant fixation are somewhat blind and the failure rate remains high. This lack of understanding is largely due ...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2009.10.019
更新日期：2010-03-03 00:00:00
abstract：:The purpose of this investigation was to determine the feasibility of using a single inertial measurement unit (IMU) placed on the sacrum to estimate 3-dimensional ground reaction force (F) during linear acceleration and change of direction tasks. Force plate measurements of F and estimates from the proposed IMU metho...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2017.07.035
更新日期：2017-08-16 00:00:00
abstract：:A continuous wave technique is described for measuring the nine independent orthotropic elastic coefficients from a single cubic specimen. The side dimensions of this cubic specimen are on the order of 5 mm. Because of the small size of the specimen, the spatial resolution of material inhomogeneity using this techniqu...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/0021-9290(84)90029-0
更新日期：1984-01-01 00:00:00
abstract：OBJECTIVE:To test if the caudal acetabulum of the cat is unloaded at mid-stance as has been asserted. MATERIALS AND METHODS:A kinematic study of five healthy cats was performed to ascertain the mid-stance angle of the hip joint, and the orientation of the pelvis and femur. Femora and pelves from 10 feline cadavers wer...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/j.jbiomech.2004.04.035
更新日期：2005-03-01 00:00:00
abstract：:A conspicuous long-term consequence of hypertension is a thickening of the arterial wall, which many suggest returns the circumferential wall stress toward its normal value. This thickening results from an increase in smooth muscle and extracellular matrix, with the associated growth and remodeling processes depending...
journal_title：Journal of biomechanics
pub_type： 杂志文章
doi：10.1016/s0021-9290(03)00178-7
更新日期：2003-11-01 00:00:00
