Flexural properties of three kinds of experimental fiber-reinforced composite posts.

abstract：:The purpose of this study was to investigate the retention force of complete palate coverage and palate-less dentures made with three polymerization systems (DS system, SR-Ivocap system, microwave polymerization system) in vitro. The retention force between each denture and a polyurethane model by intervening artifici...

journal_title：Dental materials journal

authors： Teraoka F,Nakagawa M,Takahashi J

更新日期：2004-03-01 00:00:00

abstract：:The aim of this investigation was to evaluate the metal-ceramic bonding of Au-1.6 wt% Ti alloy. Therefore, the coefficient of thermal expansion, modulus of elasticity, ceramic bonding strength, and hardness of Au-1.6 wt% Ti alloy were measured. The metal-ceramic interface was observed by EPMA to investigate its bondin...

journal_title：Dental materials journal

authors： Ito M,Kikuchi M,Okuno O,Kimura K

更新日期：2005-06-01 00:00:00

abstract：:To evaluate the cytotoxicity of resin cements on dental pulp-derived cells (bDPCs), Bifix QM (BQM), Choice 2(C2), RelyX U200(RU200), Maxcem Elite(ME), and Multilink Automix(MA) were tested. The materials were incubated in DMEM for 72 h. A real-time cell analyzer was used to evaluate cell survival. The statistical anal...

journal_title：Dental materials journal

authors： Arslan Malkoç M,Demir N,Şengün A,Bozkurt ŞB,Hakki SS

更新日期：2015-01-01 00:00:00

abstract：:The purpose of this study was to evaluate the effects of acid-etched titanium on the biological responses of osteoblast-like MC3T3-E1 cells. Four types of treatments (polishing, sandblasting, concentrated H2SO4 etching, and concentrated H2SO4 etching with vacuum firing) were carried out on the surfaces of commercially...

journal_title：Dental materials journal

authors： Iwaya Y,Machigashira M,Kanbara K,Miyamoto M,Noguchi K,Izumi Y,Ban S

更新日期：2008-05-01 00:00:00

abstract：:The aim of the study was to evaluate bone regeneration using a canine model with surgically created periodontal defects filled for 12 weeks using a stratified biomaterial consisting in a biphasic calcium phosphate (BCP) covered with a crosslinking hydrogel acting as polymer membrane of silated hydroxypropyl methylcell...

journal_title：Dental materials journal

authors： Struillou X,Fruchet A,Rakic M,Badran Z,Rethore G,Sourice S,Fellah BH,LE Guehennec L,Gauthier O,Weiss P,Soueidan A

更新日期：2018-09-30 00:00:00

abstract：:The aim of this study was to investigate the diffusion of red-stained experimental GM primer and blue-stained dentin bonding agent into EDTA-conditioned dentin and the effect of GM priming on contraction gap formation. After GM priming at 0, 35, 70, or 100 vol%, marginal adaptation was evaluated by measuring the wall-...

journal_title：Dental materials journal

authors： Nasu Y,Itoh K,Tani C,Hisamitsu H

更新日期：2010-10-01 00:00:00

abstract：:In this study, effects of the degree of dissociation of acids on the hydrolysis rate of methoxy group in γ-methacryloxypropyltrimethoxysilane (γ-MPS) and the adsorption characteristics of γ-MPS on ceramic surfaces were studied using acetic, phosphoric, and hydrochloric acids. Hydrolytic stability of γ-MPS adsorption l...

journal_title：Dental materials journal

authors： Aoki N,Kimoto S,Tanimura H,Nishiyama N,Aida M

更新日期：2014-01-01 00:00:00

abstract：:This study evaluated the effects of combining enamel microabrasion and dental bleaching on the physical properties of enamel, using in vitro and in situ conditions and evaluating surface roughness, enamel microhardness and scanning electron microscopy images. One hundred sound bovine teeth were sectioned and cut into ...

journal_title：Dental materials journal

authors： Franco LM,Machado LS,Salomão FM,Dos Santos PH,Briso AL,Sundfeld RH

更新日期：2016-01-01 00:00:00

abstract：:In this study, two types of porous zirconia and dense zirconia were used. The flexural strength of non-layered zirconia specimens and those of the layered zirconia specimens with veneering porcelain were examined. Furthermore, the shear bond strength of veneering porcelain to zirconia was examined. The flexural streng...

journal_title：Dental materials journal

authors： Nakamura T,Sugano T,Usami H,Wakabayashi K,Ohnishi H,Sekino T,Yatani H

更新日期：2014-01-01 00:00:00

abstract：:The aim of the present study was to measure various mechanical properties of acrylic denture base resins, including flexural modulus, flexural strength, fracture toughness, Barcol and Vickers hardness and their related properties, and to investigate correlations between different mechanical properties. Resin specimens...

journal_title：Dental materials journal

authors： Lee HH,Lee CJ,Asaoka K

更新日期：2012-02-03 00:00:00

abstract：:The human antimicrobial peptide beta-defensin-2 (hBD2) shows broad antibacterial activity and infrequent bacterial resistance. Here mesoporous bioactive glass (MBG) was loaded with hBD2, forming hBD2-loaded MBG (BD-MBG). The antibacterial and osteogenic effects of BD-MBG were investigated in comparison with MBG and th...

journal_title：Dental materials journal

authors： Ren L,Zhang Z,Deng C,Zhang N,Li D

更新日期：2020-12-24 00:00:00

abstract：:The purpose of this review is to summarise recent advances in the design and composition of bioactive surface layers of implantabile biomaterials, and thus the genetic potential of osteoprogenitor cells to recognize and respond to these diverse implanted biomaterials. Changes applied to a biomaterial's surface, in gen...

journal_title：Dental materials journal

authors： Letić-Gavrilović A,Scandurra R,Abe K

更新日期：2000-06-01 00:00:00

abstract：:A new tensile fatigue test using a stainless steel screw was introduced. A transparent PMMA rod was selected as the test material. A hole was drilled and tapped into the rod; a screw was put into the rod with dental cement or without cementation. Three types of cyclic loads were applied to the test piece; the number o...

journal_title：Dental materials journal

authors： Nishimura F,Nakamura H,Watari F,Tanaka I,Takahashi H

更新日期：1992-12-01 00:00:00

abstract：:This study aimed to investigate the maximum depth imaging and optical properties of the dentin near the pulp by using optical coherence tomography (OCT) and to explore the possibility of measuring the remaining dentin thickness (RDT). Human third molars were used. In experiment 1, the cuspal dentin blocks (0.50-mm to ...

journal_title：Dental materials journal

authors： Fujita R,Komada W,Nozaki K,Miura H

更新日期：2014-01-01 00:00:00

abstract：:To recognize good mechanical properties and water-resistance of a dental resin, dimethacryloxyethyl-1,1,6,6-tetrahydro-perfluoro-hexamethylene-1,6-dicarbamate (FDMHD) was newly synthesized. FDMHD initially was a white powder with m.p. 98.5-99.5°C. The copolymers of FDMHD and methyl methacrylate (MMA), FDMHD/MMA copoly...

journal_title：Dental materials journal

authors： Kurata S,Yamazaki N

更新日期：2011-01-01 00:00:00

abstract：:The reinforcement mechanism of dentin mechanical properties by intracanal medicaments was investigated. The dumbbell-shaped specimens were prepared from a collagen sheet, demineralized dentin and organic dissolved dentin. After immersing the specimens in intracanal medicaments (eugenol and formocresol), the tensile te...

journal_title：Dental materials journal

authors： Nakano F,Takahashi H,Nishimura F

更新日期：1999-09-01 00:00:00

abstract：:The objective of this study was to test the hypothesis that thermal cycling weakens the flexural strength of porcelain. Specimens of Deguceram Gold and Vita Omega 900 were tested in four groups of 30 specimens each: in the original glazed condition versus being ground with 1000-grit, 600-grit, and 100-grit silicon car...

journal_title：Dental materials journal

authors： Nakamura Y,Hojo S,Sato H

更新日期：2009-07-01 00:00:00

abstract：:The effects of desensitizer, disinfectant, saliva, blood, and hydrogen peroxide on the tensile bond strength between adhesive and ceramic as well as between adhesive and dentin were examined. Sixty 7x3 mm pressed ceramic discs of IPS e.max were fabricated and randomly assigned to six groups of different dentin surface...

journal_title：Dental materials journal

authors： Zortuk M,Kilic K,Gurbulak AG,Kesim B,Uctasli S

更新日期：2010-08-01 00:00:00

abstract：:The purpose of the present study was to analyze effective factors including periodontal ligament on vertical root fractures (VRFs). Eighty maxillary central incisors were assigned to eight groups, depending on master apical file (MAF) size, loading point and existence of a simulated periodontal ligament (PDL). The gut...

journal_title：Dental materials journal

authors： Okitsu M,Takahashi H,Yoshioka T,Iwasaki N,Suda H

更新日期：2005-03-01 00:00:00

abstract：:The extent of polymerization of light-cured composite resins cured in relatively large class II cavities was estimated by measuring Knoop hardness on sectioned surfaces of resin restorations. The influences of the incremental placement technique, exposure time, and post-curing of resin inlay on the extent of polymeriz...

journal_title：Dental materials journal

authors： Hirabayashi S,Hood JA,Hirasawa T

更新日期：1993-12-01 00:00:00

abstract：:This study examined the effect of air abrasion and thermocycling on the adaptation and shear bond strength, of composite resin bonded to dentin using etch-and-rinse and self-etch resin adhesives. Confocal microscopy showed both adhesives closely adapted to dentin and a significantly (p<0.001) greater number of resin t...

journal_title：Dental materials journal

authors： Freeman R,Varanasi S,Meyers IA,Symons AL

更新日期：2012-01-01 00:00:00

abstract：:The kinetic polymerization behavior of 2,2,2-trifluoroethyl methacrylate (TFEMA), 1,1,1,3,3,3-hexafluoroisopropyl methacrylate (HFIPMA), 2,2,2-trifluoroethyl acrylate (TFEA) and 1,1,1,3,3,3-hexafluoroisopropyl acrylate (HFIPA) was determined by isothermal differential scanning calorimetry (DSC) and high-performance li...

journal_title：Dental materials journal

authors： Kadoma Y

更新日期：2010-10-01 00:00:00

abstract：:The objective of this work was to determine the antimicrobial and antibiofilm properties of mineral trioxide aggregate (MTA) supplemented with bismuth lipophilic nanoparticles (BisBAL NPs). The antimicrobial activity of the composite MTA-BisBAL NPs was determined by the disk diffusion assay, while antibiofilm activity...

journal_title：Dental materials journal

authors： Hernandez-Delgadillo R,Del Angel-Mosqueda C,Solís-Soto JM,Munguia-Moreno S,Pineda-Aguilar N,Sánchez-Nájera RI,Chellam S,Cabral-Romero C

更新日期：2017-07-26 00:00:00

abstract：:This study compared differences in discoloration and dissolution in several titanium alloys with immersion in peroxide- or fluoride-containing solution. Commercially pure titanium (CP-Ti) and six titanium-based alloys were used: Ti-0.15Pd, Ti-6Al-4V, Ti-7Nb-6Al, Ti-55Ni, Ti-10Cu, and Ti-20Cr. Two test solutions were p...

journal_title：Dental materials journal

authors： Noguchi T,Takemoto S,Hattori M,Yoshinari M,Kawada E,Oda Y

更新日期：2008-01-01 00:00:00

abstract：:The purpose of the present study was to evaluate the effect of four silane coupling agents on the bond strength between two resin-modified glass ionomer cements and a machinable leucite glass ceramic. Ceramic specimens were ground with silicon carbide paper and cleaned with phosphoric acid. They were then conditioned ...

journal_title：Dental materials journal

authors： Kamada K,Taira Y,Yoshida K,Atsuta M

更新日期：2007-03-01 00:00:00

abstract：:The physical properties of experimental visible light-activated resins containing dyestuff, which could be quickly discolored by irradiation was, evaluated by analyzing light absorbance characteristics and measuring micro Vickers hardness. The experimental resin, which was prepared by mixing equivalent weights of Bis ...

journal_title：Dental materials journal

authors： Nakazato J,Itoh K,Wakumoto S

更新日期：1989-12-01 00:00:00

abstract：:We investigated the adsorption of lipoteichoic acid (LTA) on titanium surfaces by using the quartz crystal microbalance (QCM) method, and confirmed the influence of mucin (MUC) pre-adsorption on LTA adsorption. Two injection methods were evaluated. Namely, Method A: single-step injection of LTA solution to the Ti sens...

journal_title：Dental materials journal

authors： Yoshida E,Hayakawa T

更新日期：2020-12-03 00:00:00

abstract：:The mechanical properties of resin-modified "hybrid" glass-ionomers, for both restorative and liner/base applications, were assessed by a flexural test and compared with those of conventional acid-base glass-ionomers. Flexural strength, flexural modulus, and the modulus of resilience were determined 30 minutes after m...

journal_title：Dental materials journal

authors： Momoi Y,Hirosaki K,Kohno A,McCabe JF

更新日期：1995-12-01 00:00:00

abstract：:The objective of this study was to evaluate, using methylene blue (MB), the effects of various light sources on the bleaching action of hydrogen peroxide (H(2)O(2)) with two titanium dioxide (TiO(2)) photocatalysts - an ultraviolet light-activated TiO(2) photocatalyst (UVTiO(2)) versus a visible light-activated TiO(2)...

journal_title：Dental materials journal

authors： Suyama Y,Otsuki M,Ogisu S,Kishikawa R,Tagami J,Ikeda M,Kurata H,Cho T

更新日期：2009-11-01 00:00:00

abstract：:Photocatalytic activity from the reaction of titanium oxide with ultraviolet light has recently gained much attention. In particular, there is scientific interest in inducing photocatalytic reactions on Ti-Ni alloy, a material widely used in orthodontic applications. However, it is believed that inducing a photocataly...

journal_title：Dental materials journal

authors： Horiuchi Y,Horiuchi M,Hanawa T,Soma K

更新日期：2007-11-01 00:00:00