The extent of polymerization of Class II light-cured composite resin restorations; effects of incremental placement technique, exposure time and heating for resin inlays.

abstract：:This study evaluated the effects of combining enamel microabrasion and dental bleaching on the physical properties of enamel, using in vitro and in situ conditions and evaluating surface roughness, enamel microhardness and scanning electron microscopy images. One hundred sound bovine teeth were sectioned and cut into ...

journal_title：Dental materials journal

authors： Franco LM,Machado LS,Salomão FM,Dos Santos PH,Briso AL,Sundfeld RH

更新日期：2016-01-01 00:00:00

abstract：:The aim of this in vitro study was to evaluate the effects of desensitizer pre-treatment on in-office bleaching using an artificial discoloration tooth model. The stained specimens were divided into four groups (n=10); without application (Control group), Shield Force plus (SF group), UltraEz (UE group) and Teeth Mate...

journal_title：Dental materials journal

authors： Kyaw KY,Otsuki M,Hiraishi N,Segarra MS,Tagami J

更新日期：2019-10-02 00:00:00

abstract：:The aim of this study was to investigate the effect of three metal priming agents on the bond strength of adhesive resin cement to Silver-Zinc-Tin-Indium (Ag-Zn-Sn-In) alloy and pure Ag, Zn, Sn, and In. The specimens were air-abraded with alumina and then primed with one of three metal priming agents: V-Primer, Esteni...

journal_title：Dental materials journal

authors： Imamura N,Kawaguchi T,Shimizu H,Takahashi Y

更新日期：2018-03-30 00:00:00

abstract：:The purpose of the present study was to evaluate the effect of four silane coupling agents on the bond strength between two resin-modified glass ionomer cements and a machinable leucite glass ceramic. Ceramic specimens were ground with silicon carbide paper and cleaned with phosphoric acid. They were then conditioned ...

journal_title：Dental materials journal

authors： Kamada K,Taira Y,Yoshida K,Atsuta M

更新日期：2007-03-01 00:00:00

abstract：:This in vitro study aimed to evaluate the effect of two different polymer-based CAD/CAM materials; resin-nano ceramic (Lava Ultimate [LVU]) and composite (CERASMART [CS]), their different surface pre-treatments, and use of different resin cements on the µTBS of adhesively bonded CAD/CAM onlays to dentin. CAD/CAM mater...

journal_title：Dental materials journal

authors： Capa N,Say EC,Celebi C,Casur A

更新日期：2019-02-08 00:00:00

abstract：:Gold alloys with Cu contents of 10 mass%, 20%, and 30% were used for morphological observation of porous surface structures after heating at 800 degrees C in air followed by pickling with acid solution. With increasing Cu content in the gold alloy, the internal oxidation zone became well-developed in the alloy matrix....

journal_title：Dental materials journal

authors： Ohno H,Endo K,Haneda K,Tamura M,Hikita K

更新日期：2005-12-01 00:00:00

abstract：:The effect of etching for 90 s with low concentrations (0.5, 1.0, 2.0, 3.0, 3.5, and 4.0%) of hydrofluoric acid (HF) on the adhesiveness of computer-aided design/computer-aided manufacturing (CAD/CAM) resin blocks [CERASMART (CS), SHOFU BLOCK HC (HC), KATANA AVENCIA Block(KA), and VITA ENAMIC (EN)] was investigated. E...

journal_title：Dental materials journal

authors： Niizuma Y,Kobayashi M,Toyama T,Manabe A

更新日期：2020-12-03 00:00:00

abstract：:The purpose of this study was to investigate the retention force of complete palate coverage and palate-less dentures made with three polymerization systems (DS system, SR-Ivocap system, microwave polymerization system) in vitro. The retention force between each denture and a polyurethane model by intervening artifici...

journal_title：Dental materials journal

authors： Teraoka F,Nakagawa M,Takahashi J

更新日期：2004-03-01 00:00:00

abstract：:The purpose of the this study was to evaluate the cytotoxicity of dental resin monomers in the presence of a rat liver S9 mix containing cytochrome P 450 enzymes. JTC-12 cells derived from a monkey kidney were seeded on a 96-well multi-well-plate at 9 x 10(3) cells per well. After cultivation, the S9 mix was added to ...

journal_title：Dental materials journal

authors： Hikage S,Sato A,Suzuki S,Cox CF,Sakaguchi K

更新日期：1999-03-01 00:00:00

abstract：:The purpose of this study was to evaluate the influence of heating, cast bonding, and subsequent polishing procedures on attractive force of magnetic attachments. Two magnetic attachment systems with keepers of different chemical compositions (Hicorexslim 3013, 447J1; Magfit EX400, AUM20) were employed. Keepers examin...

journal_title：Dental materials journal

authors： Ohashi N,Koizumi H,Ishikawa Y,Furuchi M,Matsumura H,Tanoue N

更新日期：2007-05-01 00:00:00

abstract：:The clinical feasibility of a novel device called a Cariotester was investigated by measuring the Knoop hardness (KHN) of white spot lesions diagnosed as ICDAS code 1, 2 or 3. To obtain an equation for converting the Cariotester indentation depth into the KHN, a regression analysis was performed between the depth and ...

journal_title：Dental materials journal

authors： Shimizu A,Yamamoto T,Nakashima S,Nikaido T,Sugawara T,Momoi Y

更新日期：2015-01-01 00:00:00

abstract：:The aim of this study was to investigate the bond durability of heat-polymerized denture base resin to cast CP Ti and Co-Cr alloy. The alloy specimens were divided into five groups: 1) airborne-particle abraded with 50 µm alumina (SAND), 2) Rocatec tribochemical silica coating system (RO), 3) air-abraded followed by a...

journal_title：Dental materials journal

authors： Kawaguchi T,Shimizu H,Lassila LV,Vallittu PK,Takahashi Y

更新日期：2011-01-01 00:00:00

abstract：:This study evaluated and compared the influence of different supporting abutment models on the fracture loads of three-unit fixed dental prostheses (FDPs) fabricated from the following materials (n=24/material): (i) IPS e.max CAD-on, (ii) IPS e.max ZirCAD, and (iii) Telio CAD. Twelve FDPs of each group were adhesively...

journal_title：Dental materials journal

authors： Wimmer T,Erdelt KJ,Eichberger M,Roos M,Edelhoff D,Stawarczyk B

更新日期：2014-01-01 00:00:00

abstract：:The aim of this study was to evaluate temperature changes in the pulp chamber during polymerization of four different pulp-capping materials using a LED-light-curing-unit in the contact and noncontact positions. A pulpal circulation mechanism was simulated to measure increases in temperature in four pulp-capping mater...

journal_title：Dental materials journal

authors： Savas S,Botsali MS,Kucukyilmaz E,Sari T

更新日期：2014-01-01 00:00:00

abstract：:The purpose of the present study was to evaluate the bond strength between a fiber-reinforced composite (FRC) and six luting agents (Panavia F 2.0, Linkmax MC, Chemiace II, Multibond, Super-Bond C&B, and Fuji I). A prosthodontic resin composite material (RC-control) and a luting agent containing no functional monomer ...

journal_title：Dental materials journal

authors： Taira Y,Sakai M,Yang L,Sawase T,Atsuta M

更新日期：2007-09-01 00:00:00

abstract：:This study assessed the effect of the resin-coating technique on the bond strength and internal adaptation of computer-aided design/computer-aided manufacturing (CAD/CAM)-fabricated inlays. Seventy-two mesio-occlusal-distal (MOD) cavities were prepared and distributed into 3 groups according to the resin-coating techn...

journal_title：Dental materials journal

authors： Rozan S,Takahashi R,Nikaido T,Tichy A,Tagami J

更新日期：2020-12-03 00:00:00

abstract：:Ti-6Al-7Nb alloy was cast into three differently designed, removable partial denture frameworks: Palatal strap (PS), Anterior-posterior bar (AP), and Horseshoe-shaped bar (HS). The vertical displacement and local strain of Ti-6Al-7Nb alloy frameworks were investigated to compare against those of Co-Cr alloy frameworks...

journal_title：Dental materials journal

authors： Srimaneepong V,Yoneyama T,Wakabayashi N,Kobayashi E,Hanawa T,Doi H

更新日期：2004-12-01 00:00:00

abstract：:Using a scanning electron microscope (SEM) and an electron probe surface roughness analyzer (ERA), we conducted the in vivo study of the effect of various filler components on the wear of composite resins. Experimental light-cured composite resins were prepared employing three different filler components; -(1) Silica ...

journal_title：Dental materials journal

authors： Sekiya K,Okamoto A,Fukushima M,Iwaku M

更新日期：1994-06-01 00:00:00

abstract：:In this study, effects of the degree of dissociation of acids on the hydrolysis rate of methoxy group in γ-methacryloxypropyltrimethoxysilane (γ-MPS) and the adsorption characteristics of γ-MPS on ceramic surfaces were studied using acetic, phosphoric, and hydrochloric acids. Hydrolytic stability of γ-MPS adsorption l...

journal_title：Dental materials journal

authors： Aoki N,Kimoto S,Tanimura H,Nishiyama N,Aida M

更新日期：2014-01-01 00:00:00

abstract：:This study tested whether exhaled humid conditions would affect the adhesion of etch-and-rinse, two-step and one-step self-etch adhesive resins to enamel. Enamel surfaces of human maxillary anterior teeth (N=240, n=20) were exposed to four humid conditions (H1: 63-68%, H2: 73-78%, H3: 93-98%, H4: 36-45% RH) during bon...

journal_title：Dental materials journal

authors： Bavbek AB,Demir E,Goktas B,Ozcopur B,Behram B,Eskitascioglu G,Ozcan M

更新日期：2013-01-01 00:00:00

abstract：:The blending effect (BE) plays an important role in esthetics of the composite resin. The objective of this study was to determine the extents to which filler size and content affect the BE. Three types of fillers (0.7, 1.0, and 1.5 µm) were mixed at weight contents of 60, 70, 75, and 80%. This study simulated clinica...

journal_title：Dental materials journal

authors： Suh YR,Ahn JS,Ju SW,Kim KM

更新日期：2017-01-31 00:00:00

abstract：:The purpose of this study was to propose a new numerical modeling of the glass fiber cloth reinforced denture base resin (GFRP). The proposed model is constructed with an isotropic shell, beam and orthotropic shell elements representing the outmost resin, interlaminar resin and glass fiber cloth, respectively. The pro...

journal_title：Dental materials journal

authors： Tanimoto Y,Nishiwaki T,Nishiyama N,Nemoto K,Maekawa Z

更新日期：2002-06-01 00:00:00

abstract：:We aimed to establish an experimental animal model to evaluate materials for endodontic therapy. We focused on the biocompatibility of new paste-type zinc oxide-eugenol (ZOE) sealer. The results of this sealer were compared with those of conventional powder/liquid ZOE and eugenol-free sealers. The molars of Wistar rat...

journal_title：Dental materials journal

authors： Mutoh N,Tani-Ishii N

更新日期：2011-01-01 00:00:00

abstract：:The efficacy of four commercial and two experimental dentin bonding systems was examined by observing the cavity adaptation of commercial light-cured resin composites restored in the dogs scheduled to be sacrificed after a medical experiment. Before being sacrificed, a cylindrical class V cavity was prepared in each c...

journal_title：Dental materials journal

authors： Tani C,Itoh K,Ohba M,Tada K,Manabe A,Hisamitsu H,Wakumoto S

更新日期：1998-09-01 00:00:00

abstract：:The bonding efficacy of sclerotic dentin was determined by measuring the polymerization contraction gap width of a commercial light-activated resin composite in a cervical defect and by measuring the micro-Vicker's hardness at the dentin adhesive surface; morphological characteristics were observed using a scanning el...

journal_title：Dental materials journal

authors： Tani C,Itoh K,Hisamitsu H,Wakumoto S

更新日期：2001-12-01 00:00:00

abstract：:This study aimed to investigate the in vitro biological response of human dental pulp cells to glass ionomer cement (GIC, Fuji IX GP(®)) containing 2.5% magnesium carbonate apatite (MgCO(3)Ap). MgCO(3)Ap was synthesized by wet method and characterized using FT-IR, XPS, and SEM. Fuji IX GP(®) served as a control. Test ...

journal_title：Dental materials journal

authors： Laiteerapong A,Lochaiwatana Y,Hirata I,Okazaki M,Mori K,Murakami S,Poolthong S

更新日期：2012-01-01 00:00:00

abstract：:The aim of this in vitro study was to evaluate the effects of different preparation angles on the precision of fit of zirconia crown frameworks. Dies were fabricated with three different preparation angles: 4, 8, and 12 degrees total taper. Ten copings were fabricated for each angle by a laboratory and a milling-cente...

journal_title：Dental materials journal

authors： Beuer F,Edelhoff D,Gernet W,Naumann M

更新日期：2008-11-01 00:00:00

abstract：:This study evaluated the effect of adding silane coupling agent on initial and long-term bond strengths of one-step self-etch adhesives to enamel-dentin-composite in combined situation. Cervical cavities were prepared on extracted molars and filled with Clearfil AP-X. After water-storage for one-week, the filled teeth...

journal_title：Dental materials journal

authors： Mamanee T,Takahashi M,Nakajima M,Foxton RM,Tagami J

更新日期：2015-01-01 00:00:00

abstract：:In this study, different glasses were investigated to improve reusable investments. Borosilicate glass (BSG) powder and soda-lime glass (SLG) powder were prepared by milling broken beakers and microscope slides, respectively, and used in experimental investments (I-BSG, I-SLG) by blending glass powder (10 wt%) with cr...

journal_title：Dental materials journal

authors： Yagi S,Zhang Z,Aida Y,Hotta Y,Tamaki Y,Miyazaki T

更新日期：2011-01-01 00:00:00

abstract：:A zirconia-binding peptide motif was identified using a peptide phage display system. Yttria stabilized zirconia beads and discs were used as the target. Quartz crystal microbalance was used to monitor the binding of phages to zirconia. Starting from a library of phages displaying random sequences of 12-mer peptides, ...

journal_title：Dental materials journal

authors： Hashimoto K,Yoshinari M,Matsuzaka K,Shiba K,Inoue T

更新日期：2011-01-01 00:00:00