Formulation Optimization and Ex Vivo and In Vivo Evaluation of Celecoxib Microemulsion-Based Gel for Transdermal Delivery.

abstract：:The purpose of this study was to prepare ginkgolide B (GB) lyophilized powder for injection with excellent appearance and stable quality through a formulation screening and by optimizing the freeze-drying process. Cremophor EL as a solubilizer, PEG 400 as a latent solvent, and mannitol as an excipient were mixed to in...

journal_title：AAPS PharmSciTech

authors： Liu D,Galvanin F,Yu Y

更新日期：2018-02-01 00:00:00

abstract：:The classically used nontargeted chemotherapeutic approach to pancreatic cancer has a dual drawback of suboptimal drug delivery at the target site and the systemic side effects produced by the unfettered exposure of the drug to healthy tissue. This study has the objective of developing novel poly(2-ethyl-2-oxazoline) ...

journal_title：AAPS PharmSciTech

authors： Deodhar S,Dash AK,North EJ,Hulce M

更新日期：2020-08-10 00:00:00

abstract：:The physicochemical properties of the optimized microemulsion and the permeating ability of oxyresveratrol in microemulsion were evaluated, and the efficacy of oxyresveratrol microemulsion in cutaneous herpes simplex virus type 1 (HSV-1) infection in mice was examined. The optimized microemulsion was composed of 10% w...

journal_title：AAPS PharmSciTech

authors： Sasivimolphan P,Lipipun V,Ritthidej G,Chitphet K,Yoshida Y,Daikoku T,Sritularak B,Likhitwitayawuid K,Pramyothin P,Hattori M,Shiraki K

更新日期：2012-12-01 00:00:00

abstract：:Buccal bioadhesive films, releasing topical drugs in the oral cavity at a slow and predetermined rate, provide distinct advantages over traditional dosage forms. The aim of present study was to prepare and evaluate buccal bioadhesive films of clotrimazole for oral candidiasis. The film was designed to release the drug...

journal_title：AAPS PharmSciTech

authors： Singh S,Jain S,Muthu MS,Tiwari S,Tilak R

更新日期：2008-01-01 00:00:00

abstract：:The aims of the current study were to develop and evaluate clindamycin palmitate hydrochloride (CPH) 3D-printed tablets (printlets) manufactured by selective laser sintering (SLS). Optimization of the formulation was performed by studying the effect of formulation and process factors on critical quality attributes of ...

journal_title：AAPS PharmSciTech

authors： Mohamed EM,Barakh Ali SF,Rahman Z,Dharani S,Ozkan T,Kuttolamadom MA,Khan MA

更新日期：2020-08-13 00:00:00

abstract：:For the prediction of the air and product temperatures, the product moisture, and the air humidity during a coating process in a Bohle Lab-Coater, a model was developed. The purpose of this work was to determine the limit moisture, the critical moisture, and the constant for the exchange rate between both zones and to...

journal_title：AAPS PharmSciTech

authors： Page S,Baumann KH,Kleinebudde P

更新日期：2006-05-05 00:00:00

abstract：:Liposome-encapsulated polyplex system represents a promising delivery system for oligonucleotide-based therapeutics such as siRNA and asODN. Here, we report a novel method to prepare liposome-encapsulated cationic polymer/oligonucleotide polyplexes based on the reverse-phase evaporation following organic extraction of...

journal_title：AAPS PharmSciTech

authors： Ko YT,Bickel U

更新日期：2012-06-01 00:00:00

abstract：PURPOSE:To develop a novel nanoparticle drug delivery system consisting of chitosan and glyceryl monooleate (GMO) for the delivery of a wide variety of therapeutics including paclitaxel. METHODS:Chitosan/GMO nanoparticles were prepared by multiple emulsion (o/w/o) solvent evaporation methods. Particle size and surface...

journal_title：AAPS PharmSciTech

authors： Trickler WJ,Nagvekar AA,Dash AK

更新日期：2008-01-01 00:00:00

abstract：:The purpose of this work was to measure viscosity of fluids at low microliter volumes by means of quartz crystal impedance analysis. To achieve this, a novel setup was designed that allowed for measurement of viscosity at volumes of 8 to 10 microL. The technique was based on the principle of electromechanical coupling...

journal_title：AAPS PharmSciTech

authors： Saluja A,Kalonia DS

更新日期：2004-08-05 00:00:00

abstract：:Targeted delivery to the lung for controlling lung inflammation is an area that we have explored in this study. The purpose was to use microparticles containing an antisense oligonucleotide (ASO) to NF-κB to inhibit the production of proinflammatory cytokines. Microparticles were prepared using the B-290 Buchi Spray D...

journal_title：AAPS PharmSciTech

authors： Ubale RV,Shastri PN,Oettinger C,D'Souza MJ

更新日期：2018-05-01 00:00:00

abstract：:For polymer-based controlled release drug products (e.g. microspheres and implants), active pharmaceutical ingredient distribution and microporosity inside the polymer matrix are critical for product performance, particularly drug release kinetics. Due to the decreasing domain size and increasing complexity of such pr...

journal_title：AAPS PharmSciTech

authors： Zhang S,Wu D,Zhou L

更新日期：2020-07-14 00:00:00

abstract：:The aim was to develop a liposomal oxymatrine conjugating D-alpha tocopheryl polyethylene glycol 1000 succinate (OMT-LIP) for enhanced therapeutics of hepatic fibrosis. OMT-LIP was prepared using the remote loading method. The influences of formulation compositions on the encapsulation efficiency of OMT-LIP were inves...

journal_title：AAPS PharmSciTech

authors： Zhang S,Wu J,Wang H,Wang T,Jin L,Shu D,Shan W,Xiong S

更新日期：2014-06-01 00:00:00

abstract：:Ambient air humidity and temperature are known to influence the mechanical strength of tablets. The objective of this work is to understand the influence of processing parameters and environmental conditions (humidity and temperature) on the strength of bilayer tablets. As part of this study, bilayer tablets were comp...

journal_title：AAPS PharmSciTech

authors： Kottala N,Abebe A,Sprockel O,Bergum J,Nikfar F,Cuitiño AM

更新日期：2012-12-01 00:00:00

abstract：:In this study, the resveratrol spray-dried emulsions were developed using a quality-by-design approach. Further, the product and process factors that affected the quality of the spray-dried emulsions were analyzed and illustrated using an Ishikawa diagram. The product and process risks were prioritized using a risk-ra...

journal_title：AAPS PharmSciTech

authors： Benjasirimongkol P,Piriyaprasarth S,Moribe K,Sriamornsak P

更新日期：2018-12-18 00:00:00

abstract：:Pharmaceutical aerosols have been targeted to the lungs for the treatment of asthma and pulmonary infectious diseases successfully. Micafungin (Astellas Pharma US, Deerfield, IL, USA) has been shown to be an effective antifungal agent when administrated intravenously. Pulmonary delivery of micafungin has not previousl...

journal_title：AAPS PharmSciTech

authors： Shi S,Ashley ES,Alexander BD,Hickey AJ

更新日期：2009-01-01 00:00:00

abstract：:Bottles and carboys are used for frozen storage and transport of biopharmaceutical formulations under a wide range of conditions. The quality of freezing and thawing in these systems has been questioned due to the formation of heterogeneous ice structures and deformation of containers. This work shows that during free...

journal_title：AAPS PharmSciTech

authors： Duarte A,Rego P,Ferreira A,Dias P,Geraldes V,Rodrigues MA

更新日期：2020-09-01 00:00:00

abstract：:The effect of milled and micronized lactose fines on the fluidization and in vitro aerosolization properties of dry powder inhaler (DPI) formulations was investigated, and the suitability of static and dynamic methods for characterizing general powder flow properties of these blends was assessed. Lactose carrier pre-b...

journal_title：AAPS PharmSciTech

authors： Kinnunen H,Hebbink G,Peters H,Shur J,Price R

更新日期：2014-08-01 00:00:00

abstract：:Cancerous invasion yields unusual metabolisms providing a significant amount of peptide albuminomes that modulate albumin stability via binding. The study aimed at the investigation of the thermal stability of human plasma albumin with breast cancer of various stages by means of differential scanning calorimetry (DSC)...

journal_title：AAPS PharmSciTech

authors： Faroongsarng D,Sunpaweravong S,Raksawong A

更新日期：2019-03-18 00:00:00

abstract：:The exudates from the incised trunk of Terminalia randii has been evaluated as controlled release excipient in comparison with xanthan gum and hydroxypropylmethylcellulose (HPMC) using carvedilol (water insoluble) and theophylline (water soluble) as model drugs. Matrix tablets were prepared by direct compression and t...

journal_title：AAPS PharmSciTech

authors： Bamiro OA,Odeku OA,Sinha VR,Kumar R

更新日期：2012-03-01 00:00:00

abstract：:The present study focuses on the development and characterization of nanosuspension of a poorly soluble drug, silver sulfadiazine (SSD) incorporated in Aloe vera gel (AV-gel) for improving its therapeutic efficacy. The SSD solution in ammonia was subjected to nanoprecipitation in surfactant solution and particle size ...

journal_title：AAPS PharmSciTech

authors： Barkat MA,Harshita,Ahmad I,Ali R,Singh SP,Pottoo FH,Beg S,Ahmad FJ

更新日期：2017-11-01 00:00:00

abstract：:To enhance the stability of coenzyme Q10 (CoQ10), Kolliphor® HS 15 (HS15) was employed as a carrier to build up a stable CoQ10-loaded micelle delivery system. The impact of micellar compositions, the preparation condition, and the preparation method on size characteristics, the solubilization efficiency, and micellar ...

journal_title：AAPS PharmSciTech

authors： Liu L,Mao K,Wang W,Pan H,Wang F,Yang M,Liu H

更新日期：2016-06-01 00:00:00

abstract：:Direct pulmonary delivery is a promising step in developing effective gene therapies for respiratory disease. Gene therapies can be used to treat the root cause of diseases, rather than just the symptoms. However, developing effective therapies that do not cause toxicity and that successfully reach the target site at ...

journal_title：AAPS PharmSciTech

authors： Terry TL,Givens BE,Rodgers VGJ,Salem AK

更新日期：2019-01-02 00:00:00

abstract：:The objective of this study was to investigate the combined effect of pH modifiers and nucleation inhibitors on enhancing and sustaining the dissolution of AMG 009 tablet via supersaturation. Several bases and polymers were added as pH modifiers and nucleation inhibitors, respectively, to evaluate their impact on the ...

journal_title：AAPS PharmSciTech

authors： Bi M,Kyad A,Kiang YH,Alvarez-Nunez F,Alvarez F

更新日期：2011-12-01 00:00:00

abstract：:In previous studies, we developed and characterised multicompartmental microcapsules as a platform for the targeted oral delivery of lipophilic drugs in type 2 diabetes (T2D). We also designed a new microencapsulated formulation of probucol-sodium alginate (PB-SA), with good structural properties and excipient compati...

journal_title：AAPS PharmSciTech

authors： Mooranian A,Negrulj R,Al-Sallami HS,Fang Z,Mikov M,Golocorbin-Kon S,Fakhoury M,Watts GF,Matthews V,Arfuso F,Lambros A,Al-Salami H

更新日期：2015-02-01 00:00:00

abstract：:The release of propranolol hydrochloride from matrix tablets with hydroxy propyl methyl cellulose (HPMC K15M) or KollidonSR at different concentrations was investigated with a view to developing twice daily sustained release dosage form. A hydrophilic matrix-based tablet using different concentrations of HPMC K15M or ...

journal_title：AAPS PharmSciTech

authors： Sahoo J,Murthy PN,Biswal S,Sahoo SK,Mahapatra AK

更新日期：2008-01-01 00:00:00

abstract：:Spironolactone is a drug derived from sterols that exhibits an incomplete oral absorption due to its low water solubility and slow dissolution rate. In this study, formulations of spironolactone with four disintegrants named as croscarmellose sodium, crospovidone, sodium starch glycolate and microcrystalline cellulose...

journal_title：AAPS PharmSciTech

authors： Rojas J,Guisao S,Ruge V

更新日期：2012-12-01 00:00:00

abstract：:Poly(propylene succinate) (PPSu) polymers of average molecular weights from 2,800 to 13,100 g/mol were synthesized and characterized with regard to crystallinity, thermal properties, and cytocompatibility. Higher molecular weight samples exhibited lower degree of crystallinity and melted at lower temperatures. Melting...

journal_title：AAPS PharmSciTech

authors： Bikiaris DN,Papageorgiou GZ,Papadimitriou SA,Karavas E,Avgoustakis K

更新日期：2009-01-01 00:00:00

abstract：:The present investigation concerns with the development and optimization of an in situ forming formulation using 3(3) full factorial design experimentation. Metformin, an antidiabetic drug with upper part of gastrointestinal tract as absorption window was used as a model drug. The formulations were designed with an ob...

journal_title：AAPS PharmSciTech

authors： Nagarwal RC,Srinatha A,Pandit JK

更新日期：2009-01-01 00:00:00

abstract：:The stability of the 37-amino acid peptide pramlintide, in aqueous solution, was studied as a function of pH and temperature. Samples of pramlintide formulated as a parenteral product were exposed to elevated temperatures and to realistic storage conditions for as long as 30 months. Pramlintide degradation was monitor...

journal_title：AAPS PharmSciTech

authors： Kenley RA,Tracht S,Stepanenko A,Townsend M,L'Italien J

更新日期：2000-03-18 00:00:00

abstract：:The purpose of this study was to design and investigate the transdermal controlled release cubic phase gels containing capsaicin using glycerol monooleate (MO), propylene glycol (1,2-propanediol, PG), and water. Three types of cubic phase gels were designed based on the ternary phase diagram of the MO-PG-water system,...

journal_title：AAPS PharmSciTech

authors： Peng X,Wen X,Pan X,Wang R,Chen B,Wu C

更新日期：2010-09-01 00:00:00