Abstract:
:To enhance the stability of coenzyme Q10 (CoQ10), Kolliphor® HS 15 (HS15) was employed as a carrier to build up a stable CoQ10-loaded micelle delivery system. The impact of micellar compositions, the preparation condition, and the preparation method on size characteristics, the solubilization efficiency, and micellar stability were investigated. The optimal preparation conditions were 1:6, 4, 0.2%, 118°C, and 25 min for CoQ10/HS15 mass ratio, pH value, the concentration of glucose, and the sterilization conditions. Upon these conditions, the particle size, polydispersity index (PDI), zeta potential, the entrapment efficiency, drug loading, and the critical micelle concentration (CMC) of CoQ10-loaded micelles were 19.76 nm, 0.112, -3.405 mV, 99.39%, 13.77%, and 5.623 × 10(-4) g/mL, respectively. Differential scanning calorimetry (DSC) analysis collectively corroborated that CoQ10 was entrapped into the micelles in amorphous form. The release pattern of drug was analyzed and proved to follow the first order. Additionally, the samples were exposed to the temperatures of 30°C for 6 months with more significant impact on their stabilities as compared to 4 and 25°C based on particle size and PDI. Under constant humidity with light protection long-term (25 ± 2°C, relative humidity (RH) 60 ± 10%, 18 months) conditions, there was no variation except minor changes of CoQ10 content of the samples. The shelf life of the micellar samples could be predicted as 24 months based on the stability results. Consequently, the CoQ10-loaded micelles showed excellent stabilities below 25°C as a potential drug candidate for further clinical applications.
journal_name
AAPS PharmSciTechjournal_title
AAPS PharmSciTechauthors
Liu L,Mao K,Wang W,Pan H,Wang F,Yang M,Liu Hdoi
10.1208/s12249-015-0399-5subject
Has Abstractpub_date
2016-06-01 00:00:00pages
757-66issue
3issn
1530-9932pii
10.1208/s12249-015-0399-5journal_volume
17pub_type
杂志文章abstract::The present investigation concerns with the development and optimization of an in situ forming formulation using 3(3) full factorial design experimentation. Metformin, an antidiabetic drug with upper part of gastrointestinal tract as absorption window was used as a model drug. The formulations were designed with an ob...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-009-9285-3
更新日期:2009-01-01 00:00:00
abstract::The aim of this study was to introduce smectite clay matrices as a drug delivery carrier for the development of amorphous solid dispersions (ASD). Indomethacin (IND) was processed with two different smectite clays, magnesium aluminium and lithium magnesium sodium silicates, using hot melt extrusion (HME) to prepare so...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-020-01813-x
更新日期:2020-10-08 00:00:00
abstract::Two different types of derivatives of theophylline (Th-H) incorporating ethyleneoxy groups into the promoiety have been synthesized. One is a soft alkyl type where N-methyl-N-methoxyethyleneoxycarbonylaminomethyl chlorides have been used to alkylate Th-H in the 7 position. The other is in an acyl type where methoxyeth...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-012-9803-6
更新日期:2012-09-01 00:00:00
abstract::The present work explores inner structuration of in situ gelling system consisting of glyceryl monooleate (GMO) and oleic acid (OA). The system under study involves investigation of microstructural changes which are believed to govern the pharmaceutical performance of final formulation. The changes which are often ter...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-015-0308-y
更新日期:2015-10-01 00:00:00
abstract::The approach documented in this article reviews data from earlier process validation lifecycle stages with a described statistical model to provide the "best estimate" on the number of process performance qualification (PPQ) batches that should generate sufficient information to make a scientific and risk-based decisi...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章,评审
doi:10.1208/s12249-015-0409-7
更新日期:2016-08-01 00:00:00
abstract::Pellet manufacturing by extrusion/spheronization is quite common in the pharmaceutical field because the obtained product is characterized by a high sphericity as well as a narrow particle size distribution. The established mechanisms only consider deformation of the initially fractured particles but do not account fo...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-010-9532-7
更新日期:2010-12-01 00:00:00
abstract::The aim of this study was to formulate a new delivery system for ecological pesticides by the incorporation of Artemisia arborescens L essential oil into solid lipid nanoparticles (SLN). Two different SLN formulations were prepared following the high-pressure homogenization technique using Compritol 888 ATO as lipid a...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt070102
更新日期:2006-01-03 00:00:00
abstract::This research aimed to synthesize and evaluate mucoadhesive catechol-functionalized alginate (Cat-Alg) nanoparticles (NPs) for bladder cancer. Cat-Alg was synthesized using coupling chemistry, and the structure was verified using NMR and FT-IR. Cat-Alg NPs were generated by ionic gelation between the synthesized Cat-A...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-020-01752-7
更新日期:2020-07-31 00:00:00
abstract::The aim of the present study was to investigate the feasibility of the inclusion of a water-insoluble drug (diazepam, DZ) into solid lipid nanoparticles (SLNs), which offer combined advantages of rapid onset and prolonged release of the drug. This work also describes a new approach to prepare suppositories containing ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-009-9197-2
更新日期:2009-01-01 00:00:00
abstract::Developing amorphous solid dispersions of water-insoluble molecules using polymeric materials is a well-defined approach to improve the dissolution rate and bioavailability. While the selected polymer plays a vital role in stabilizing the amorphous solid dispersion physically, it is equally important to improve the di...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-014-0281-x
更新日期:2015-10-01 00:00:00
abstract::Poly(vinyl alcohol) (PVA)-based formulations are used for pharmaceutical tablet coating with numerous advantages. Our objective is to study the stability of PVA-based coating films in the presence of acidic additives, alkaline additives, and various common impurities typically found in tablet formulations. Opadry® II ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-011-9630-1
更新日期:2011-06-01 00:00:00
abstract::Cancerous invasion yields unusual metabolisms providing a significant amount of peptide albuminomes that modulate albumin stability via binding. The study aimed at the investigation of the thermal stability of human plasma albumin with breast cancer of various stages by means of differential scanning calorimetry (DSC)...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-019-1356-5
更新日期:2019-03-18 00:00:00
abstract::Ferulic acid is contained in some Chinese herbal medicines such as Ligusticum chuanxiong or Angelica sinensis. Studies have focused on the treatment of inflammatory diseases and pain using ferulic acid. However, little is known about its pharmacokinetics after transdermal administration. The present research investiga...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-020-01709-w
更新日期:2020-06-08 00:00:00
abstract::A melt solidification technique has been developed to obtain sustained-release waxy beads of flurbiprofen. Low glass transition temperature (t(g)) and shear-induced crystallization of flurbiprofen made it a suitable candidate for melt solidification technique. The process involved emulsification and solidification of ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt040465
更新日期:2003-12-16 00:00:00
abstract::The aim of this study was to identify trends in deficiencies raised during the EU evaluation of the quality part of dossiers for marketing authorisation applications of biosimilar medicinal products. All adopted day 120 list of questions on the quality module of 22 marketing authorisation applications for biosimilars ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-017-0892-0
更新日期:2018-02-01 00:00:00
abstract::The specific aim of the present study was to investigate the biodegradation and biocompatibility characteristics of rosin, a natural film-forming polymer. Both in vitro as well as in vivo methods were used for assessment of the same. The in vitro degradation of rosin films was followed in pH 7.4 phosphate buffered sal...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt040455
更新日期:2003-10-22 00:00:00
abstract::A feasibility evaluation of the addition of fumed silica (SiO2) into an agitated dryer to aid spray-dried solid dispersion intermediate (SDSDi) flow during secondary drying and discharge is described. The quantity of SiO2 to enhance the flow character of SDSDi was assessed by measuring particle size distribution, bulk...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-019-1392-1
更新日期:2019-05-03 00:00:00
abstract::This proof-of-concept study explores the feasibility of using a drug-loaded hydrophilic polymeric layer sandwiched between two hydrophobic layers for improving film drug load while achieving sustained release of poorly water-soluble drug. Such films having total thickness in range ~ 146-250 μm were prepared by slurry-...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-018-1089-x
更新日期:2018-08-01 00:00:00
abstract::This study was conducted to formulate buccal films consisting of polyvinyl alcohol (PVA) and poly-N-hydroxyethyl-aspartamide (PHEA), to improve the dissolution of the drug through the oral mucosa. Ibuprofen sodium salt was used as a model drug, and the buccal film was expected to enhance its dissolution rate. Two diff...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-020-01811-z
更新日期:2020-10-02 00:00:00
abstract::This study examined the effect of rotor speed, amount of water sprayed, and atomizing air pressure on the geometric mean diameter and geometric standard deviation of pellets produced in a fluid-bed rotor granulator using a 23 factorial design and an optimization technique. Pellets were prepared by wet granulation. Equ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt010435
更新日期:2000-12-01 00:00:00
abstract::Effectiveness of CNS-acting drugs depends on the localization, targeting, and capacity to be transported through the blood-brain barrier (BBB) which can be achieved by designing brain-targeting delivery vectors. Hence, the objective of this study was to screen the formulation and process variables affecting the perfor...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-016-0481-7
更新日期:2016-12-01 00:00:00
abstract::The main principles of green chemistry and engineering were extended to pharmaceutical formulations to prepare eco-friendly surfactant-free dry emulsion tablets (SFDETs) devoid of solvents or synthetic surfactants. Surfactant-free emulsions were stabilized by in situ cyclodextrins/sweet almond oil inclusion complexes ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-019-1450-8
更新日期:2019-07-18 00:00:00
abstract::Freeze-dried immunoglobulin G (IgG) incorporating trehalose and human serum albumin (HSA) was statistically evaluated regarding the existence of synergism between additives on the stability profile. The levels of HSA (X1) and trehalose (X2) were independent variables. Aggregation following the process (Y1), after 2 an...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-019-1509-6
更新日期:2019-10-28 00:00:00
abstract::Niacin (nicotinic acid, NA) is administered orally as an antihyperlipidemic agent in extended-release (ER) tablets in high doses. Due to rapid absorption and extensive metabolism (non-linear pharmacokinetics), the drug plasma levels are highly variable, which may correlate with side effects. Interestingly, this errati...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-019-1600-z
更新日期:2020-01-27 00:00:00
abstract::The purpose of this study was to investigate the effect of particle size, storage temperature, and duration of storage on the physical stability and morphology of polylactic-co-glycolic acid (PLGA) nanospheres and microspheres. PLGA nanospheres and microspheres containing the fluorescent dye, Bodipy, were prepared in ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt050453
更新日期:2004-09-13 00:00:00
abstract::In this study, we investigated the in vitro characteristics of mefenamic acid (MA) microparticles as well as their effects on DNA damage. MA-loaded chitosan and alginate beads were prepared by the ionotropic gelation process. Microsponges containing MA and Eudragit RS 100 were prepared by quasi-emulsion solvent diffus...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-008-9183-0
更新日期:2009-01-01 00:00:00
abstract::The impact of pharmaceutical materials properties on drug product quality and manufacturability is well recognised by the industry. An ongoing effort across industry and academia, the Manufacturing Classification System consortium, aims to gather the existing body of knowledge in a common framework to provide guidance...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章,评审
doi:10.1208/s12249-018-1198-6
更新日期:2018-11-01 00:00:00
abstract::The reliable in-line monitoring of pharmaceutical processes has been regarded as a key tool toward the full implementation of process analytical technology. In this study, near-infrared (NIR) spectroscopy was examined for use as an in-line monitoring method of the paracetamol cooling crystallization process. The drug ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-011-9642-x
更新日期:2011-06-01 00:00:00
abstract::A number of synthesized chemical molecules suffer from low aqueous solubility problems. Enhancement of aqueous solubility, dissolution rate, and bioavailability of drug is a very challenging task in drug development. In the present study, solubility and dissolution of poorly aqueous soluble drug simvastatin (SIM) was ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-008-9176-z
更新日期:2008-01-01 00:00:00
abstract::Modifications to the surface chemistry, charge, and hydrophilicity/hydrophobicity of nanoparticles are applicable approaches to the alterations of the in vivo fate of intravenously administered nano-sized drug carriers. The objective of this study is to investigate the in vitro and in vivo antitumor efficacies of curc...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-020-01698-w
更新日期:2020-06-11 00:00:00