Formulation Optimization of Selective Laser Sintering 3D-Printed Tablets of Clindamycin Palmitate Hydrochloride by Response Surface Methodology.

Abstract:

:The aims of the current study were to develop and evaluate clindamycin palmitate hydrochloride (CPH) 3D-printed tablets (printlets) manufactured by selective laser sintering (SLS). Optimization of the formulation was performed by studying the effect of formulation and process factors on critical quality attributes of the printlets. The independent factors studied were laser scanning speed, microcrystalline cellulose (MCC), and lactose monohydrate (LMH) concentration. The responses measured were printlets weight, hardness, disintegration time (DT), and dissolution in 30 min. The printlets were characterized for content uniformity, chemical interactions, crystallinity, drug distribution, morphology, and porosity. The laser scanning speed showed statistically significant effects on all the studied dependent responses (p < 0.05). MCC showed statistically significant effects on hardness, DT, and dissolution (p < 0.05), while LMH showed statistically significant effect on hardness and dissolution (p < 0.05). The model was validated by an independent formulation, and empirical values were in close agreement with model-predicted values. X-ray powder diffraction and differential scanning calorimetry data suggested a decrease in crystallinity of the LMH in the printlets. X-ray micro-CT scanning showed porous microstructure of the printlets with a porosity 24.4% and 31.1% for the printlets printed at 200 and 300 mm/s laser speed, respectively. In summary, the SLS method provides an opportunity to fabricate customized dosage forms as per patients' need.

journal_name

AAPS PharmSciTech

journal_title

AAPS PharmSciTech

authors

Mohamed EM,Barakh Ali SF,Rahman Z,Dharani S,Ozkan T,Kuttolamadom MA,Khan MA

doi

10.1208/s12249-020-01775-0

subject

Has Abstract

pub_date

2020-08-13 00:00:00

pages

232

issue

6

issn

1530-9932

pii

10.1208/s12249-020-01775-0

journal_volume

21

pub_type

杂志文章
  • Development and In Vitro Evaluation of Long Circulating Liposomes for Targeted Delivery of Gemcitabine and Irinotecan in Pancreatic Ductal Adenocarcinoma.

    abstract::The classically used nontargeted chemotherapeutic approach to pancreatic cancer has a dual drawback of suboptimal drug delivery at the target site and the systemic side effects produced by the unfettered exposure of the drug to healthy tissue. This study has the objective of developing novel poly(2-ethyl-2-oxazoline) ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01745-6

    authors: Deodhar S,Dash AK,North EJ,Hulce M

    更新日期:2020-08-10 00:00:00

  • Respiratory Administration of Infliximab Dry Powder for Local Suppression of Inflammation.

    abstract::The airways are verified as a relevant route to improve antibody therapeutic index with superior lung concentration but limited passage into systemic blood stream. The current research aimed to process spray-dried (SD) powder of Infliximab to assess the feasibility of respiratory delivery of antibody for local suppres...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1308-0

    authors: Faghihi H,Najafabadi AR,Daman Z,Ghasemian E,Montazeri H,Vatanara A

    更新日期:2019-02-26 00:00:00

  • Swellable ciprofloxacin-loaded nano-in-micro hydrogel particles for local lung drug delivery.

    abstract::Incorporation of drug-loaded nanoparticles into swellable and respirable microparticles is a promising strategy to avoid rapid clearance from the lung and achieve sustained drug release. In this investigation, a copolymer of polyethylene glycol grafted onto phthaloyl chitosan (PEG-g-PHCs) was synthesized and then self...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-014-0176-x

    authors: Du J,El-Sherbiny IM,Smyth HD

    更新日期:2014-12-01 00:00:00

  • In vitro dissolution of generic immediate-release solid oral dosage forms containing BCS class I drugs: comparative assessment of metronidazole, zidovudine, and amoxicillin versus relevant comparator pharmaceutical products in South Africa and India.

    abstract::Biowaivers are recommended for immediate-release solid oral dosage forms using dissolution testing as a surrogate for in vivo bioequivalence studies. Several guidance are currently available (the World Health Organization (WHO), the US FDA, and the EMEA) where the conditions are described. In this study, definitions, ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-014-0135-6

    authors: Reddy NH,Patnala S,Löbenberg R,Kanfer I

    更新日期:2014-10-01 00:00:00

  • Design and Characterization of Metformin-Loaded Solid Lipid Nanoparticles for Colon Cancer.

    abstract::Colorectal cancer is a global concern, and its treatment is fraught with non-selective effects including adverse side effects requiring hospital visits and palliative care. A relatively safe drug formulated in a bioavailability enhancing and targeting delivery platform will be of significance. Metformin-loaded solid l...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-016-0505-3

    authors: Ngwuluka NC,Kotak DJ,Devarajan PV

    更新日期:2017-02-01 00:00:00

  • Preparation and characterization of co-grinded mixtures of aceclofenac and neusilin US2 for dissolution enhancement of aceclofenac.

    abstract::The present study was carried out with a view to enhance the dissolution of poorly water-soluble BCS-class II drug aceclofenac by co-grinding with novel porous carrier Neusilin US(2.) (amorphous microporous granules of magnesium aluminosilicate, Fuji Chemical Industry, Toyama, Japan). Neusilin US(2) has been used as a...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-009-9221-6

    authors: Vadher AH,Parikh JR,Parikh RH,Solanki AB

    更新日期:2009-01-01 00:00:00

  • PLGA Nanoparticles as Subconjunctival Injection for Management of Glaucoma.

    abstract::Nanoparticles fabricated from the biodegradable and biocompatible polymer, polylactic-co-glycolic acid (PLGA), could be a promising system for targeting ocular drug delivery. The objective of this work was to investigate the possibility of encapsulating brinzolamide in PLGA nanoparticles in order to be applied as a su...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-017-0710-8

    authors: Salama HA,Ghorab M,Mahmoud AA,Abdel Hady M

    更新日期:2017-10-01 00:00:00

  • Application of Gamma Radiation on Hard Gelatin Capsules as Sterilization Technique and Its Consequences on the Chemical Structure of the Material.

    abstract::Hard capsules are made from gelatin, an organic polymer obtained through the hydrolysis of collagen present in animal tissues. Gelatin can be degraded by microorganisms and some strategies can be used to control contaminating micro-organisms. Gamma irradiation is considered as an effective sterilization method; howeve...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1394-z

    authors: Rodrigues JT,Neto FNS,Ferreira MF,Naves PLF,Guilherme LR

    更新日期:2019-05-20 00:00:00

  • Evaluation of the performance characteristics of bilayer tablets: Part II. Impact of environmental conditions on the strength of bilayer tablets.

    abstract::Ambient air humidity and temperature are known to influence the mechanical strength of tablets. The objective of this work is to understand the influence of processing parameters and environmental conditions (humidity and temperature) on the strength of bilayer tablets. As part of this study, bilayer tablets were comp...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-012-9846-8

    authors: Kottala N,Abebe A,Sprockel O,Bergum J,Nikfar F,Cuitiño AM

    更新日期:2012-12-01 00:00:00

  • A comprehensive development strategy in buccal drug delivery.

    abstract::This work combines several methods in an integrated strategy to develop a matrix for buccal administration. For this purpose, tablets containing selected mucoadhesive polymers loaded with a model drug (omeprazole), free or in a complexed form with cyclodextrins, and in the absence and presence of alkali agents were su...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-010-9546-1

    authors: Figueiras A,Pais AA,Veiga FJ

    更新日期:2010-12-01 00:00:00

  • Chitosan and glyceryl monooleate nanostructures containing gemcitabine: potential delivery system for pancreatic cancer treatment.

    abstract::The objectives of this study are to enhance cellular accumulation of gemcitabine with chitosan/glyceryl monooleate (GMO) nanostructures, and to provide significant increase in cell death of human pancreatic cancer cells in vitro. The delivery system was prepared by a multiple emulsion solvent evaporation method. The n...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-010-9393-0

    authors: Trickler WJ,Khurana J,Nagvekar AA,Dash AK

    更新日期:2010-03-01 00:00:00

  • Process analytical technology: application to particle sizing in spray drying.

    abstract::The purpose of this research was to explore the possibility of employing PAT for particle sizing during spray drying with the use of an in-line and at-line laser diffraction system. Microspheres were made using maltodextrin and modified starch as wall material and size results obtained using PAT compared with those de...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-007-9011-y

    authors: Chan LW,Tan LH,Heng PW

    更新日期:2008-01-01 00:00:00

  • Estimating the number of droplets and drug particles emitted from MDIs.

    abstract::The objective of this paper is to assess the number of drug particles or droplets contained in metered dose inhaler (MDI) aerosols. Equations were developed to estimate this. The number of drug particles was estimated to be as high as about 300 million for QVAR solution MDIs and as low as 670,000 for Beclovent MDIs. T...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-007-9006-8

    authors: Stein SW

    更新日期:2008-01-01 00:00:00

  • Highly sensitive spectrofluorimetric method for determination of certain aminoglycosides in pharmaceutical formulations and human plasma.

    abstract::A simple, reliable, highly sensitive and selective spectrofluorimetric method has been developed for determination of certain aminoglycosides namely amikacin sulfate, tobramycin, neomycin sulfate, gentamicin sulfate, kanamycin sulfate and streptomycin sulfate. The method is based on the formation of a charge transfer ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-013-9969-6

    authors: Omar MA,Nagy DM,Hammad MA,Aly AA

    更新日期:2013-06-01 00:00:00

  • Anti-Helicobacter pylori effect of mucoadhesive nanoparticles bearing amoxicillin in experimental gerbils model.

    abstract::The purpose of the present study was to design mucoadhesive gliadin nanoparticles (GNP) containing amoxicillin and to evaluate their effectiveness in eradicating Helicobacter pylori. GNP-bearing amoxicillin (AGNP) was prepared by desolvation method. The effect of process variables such as gliadin concentration and ini...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt050232

    authors: Umamaheshwari RB,Ramteke S,Jain NK

    更新日期:2004-04-07 00:00:00

  • Formulation Optimization and Ex Vivo and In Vivo Evaluation of Celecoxib Microemulsion-Based Gel for Transdermal Delivery.

    abstract::Celecoxib (CXB) is a poorly aqueous solubility sulfonamide non-steroidal anti-inflammatory drug (NSAID). Hence, the formulation of CXB was selected for solubilization and bioavailability. To find out suitable formulation for microemulsion, the solubility of CXB in triacetin (oil phase), Tween 80 (surfactant), and Tran...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-016-0667-z

    authors: Cao M,Ren L,Chen G

    更新日期:2017-08-01 00:00:00

  • Rapid particle size measurement using 3D surface imaging.

    abstract::The present study introduces a new three-dimensional (3D) surface image analysis technique in which white light illumination from different incident angles is used to create 3D surfaces with a photometric approach. The three-dimensional features of the surface images created are then used in the characterization of pa...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-011-9607-0

    authors: Soppela I,Airaksinen S,Hatara J,Räikkönen H,Antikainen O,Yliruusi J,Sandler N

    更新日期:2011-06-01 00:00:00

  • Application of pharmaceutical QbD for enhancement of the solubility and dissolution of a class II BCS drug using polymeric surfactants and crystallization inhibitors: development of controlled-release tablets.

    abstract::The aim of this study was to apply quality by design (QbD) for pharmaceutical development of felodipine solid mixture (FSM) containing hydrophilic carriers and/or polymeric surfactants, for easier development of controlled-release tablets of felodipine. The material attributes, the process parameters (CPP), and the cr...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-011-9646-6

    authors: Basalious EB,El-Sebaie W,El-Gazayerly O

    更新日期:2011-09-01 00:00:00

  • Development and validation of a discriminating in vitro dissolution method for a poorly soluble drug, olmesartan medoxomil: comparison between commercial tablets.

    abstract::A dissolution test for tablets containing 40 mg of olmesartan medoxomil (OLM) was developed and validated using both LC-UV and UV methods. After evaluation of the sink condition, dissolution medium, and stability of the drug, the method was validated using USP apparatus 2, 50 rpm rotation speed, and 900 ml of deaerate...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-010-9421-0

    authors: Bajerski L,Rossi RC,Dias CL,Bergold AM,Fröehlich PE

    更新日期:2010-06-01 00:00:00

  • Isolation, Formulation, and Efficacy Enhancement of Morin Emulsified Carriers Against Lung Toxicity in Rats.

    abstract::The present study demonstrates a preparative medium-pressure liquid chromatography (MPLC) method for isolation of Morin besides evaluating its efficacy in comparison with its self-nanoemulsifying drug delivery (SNEDD) and nanoemulsion (NE) systems against in-vivo HgCl2-induced lung toxicity in rats. Morin was isolated...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1072-6

    authors: El-Haddad AE,Sheta NM,Boshra SA

    更新日期:2018-07-01 00:00:00

  • Reformulation of a new vancomycin analog: An example of the importance of buffer species and strength.

    abstract::The purpose of this research was to use our previously validated dynamic injection apparatus as a rapid method for screening pH-adjusted formulations of a new vancomycin analog, Van-An, for their potential to precipitate upon dilution. In 1 vial, Van-An was reconstituted according to the manufacturer's instructions. I...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt070105

    authors: Johnson JL,Yalkowsky SH

    更新日期:2006-03-01 00:00:00

  • Development and Evaluation of Astaxanthin as Nanostructure Lipid Carriers in Topical Delivery.

    abstract::The study is designed to formulate, optimize, and evaluate astaxanthin (ASTA)-loaded nanostructured lipid carrier (NLC) with an aim to improve its stability, water solubility, skin permeability and retention and reduce drug-related side effects. ASTA was extracted from Haematococcus pluvialis. ASTA-NLC was formulated ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01822-w

    authors: Geng Q,Zhao Y,Wang L,Xu L,Chen X,Han J

    更新日期:2020-11-11 00:00:00

  • Enhanced Understanding of Pharmaceutical Materials Through Advanced Characterisation and Analysis.

    abstract::The impact of pharmaceutical materials properties on drug product quality and manufacturability is well recognised by the industry. An ongoing effort across industry and academia, the Manufacturing Classification System consortium, aims to gather the existing body of knowledge in a common framework to provide guidance...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-018-1198-6

    authors: Ferreira AP,Gamble JF,Leane MM,Park H,Olusanmi D,Tobyn M

    更新日期:2018-11-01 00:00:00

  • Pore direction in relation to anisotropy of mechanical strength in a cubic starch compact.

    abstract::The purpose of this research was to evaluate the relation between preferential direction of pores and mechanical strength of cubic starch compacts. The preferential pore direction was quantified in SEM images of cross sections of starch compacts using a previously described algorithm for determination of the quotient ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-008-9074-4

    authors: Wu YS,van Vliet LJ,Frijlink HW,Stokroos I,van der Voort Maarschalk K

    更新日期:2008-01-01 00:00:00

  • Kinetics of pramlintide degradation in aqueous solution as a function of temperature and pH.

    abstract::The stability of the 37-amino acid peptide pramlintide, in aqueous solution, was studied as a function of pH and temperature. Samples of pramlintide formulated as a parenteral product were exposed to elevated temperatures and to realistic storage conditions for as long as 30 months. Pramlintide degradation was monitor...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt010207

    authors: Kenley RA,Tracht S,Stepanenko A,Townsend M,L'Italien J

    更新日期:2000-03-18 00:00:00

  • Essential oil formulations useful as a new tool for insect pest control.

    abstract::This study investigated the effects of some essential oils on Limantria dispar (Lepidoptera: Lymantridae, gypsy moth) larvae, one of the most serious pests of cork oak forests. The essential oils were first formulated as oil in water (o/w) emulsions and used in laboratory bioassays to assess their lethal concentration...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt030213

    authors: Moretti MD,Sanna-Passino G,Demontis S,Bazzoni E

    更新日期:2002-01-01 00:00:00

  • Formulation Screening and Freeze-Drying Process Optimization of Ginkgolide B Lyophilized Powder for Injection.

    abstract::The purpose of this study was to prepare ginkgolide B (GB) lyophilized powder for injection with excellent appearance and stable quality through a formulation screening and by optimizing the freeze-drying process. Cremophor EL as a solubilizer, PEG 400 as a latent solvent, and mannitol as an excipient were mixed to in...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-017-0858-2

    authors: Liu D,Galvanin F,Yu Y

    更新日期:2018-02-01 00:00:00

  • The influence of modified pluronic F127 copolymers with higher phase transition temperature on arsenic trioxide-releasing properties and toxicity in a subcutaneous model of rats.

    abstract::Pluronic F127 (PF-127) shows thermoreversible property, which is of the utmost interest in optimizing drug formulation and delivery. However, its hitherto unresolved drawback of a low phase transition temperature (T (tr)) has limited its application in injectable drug delivery systems. We have ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-012-9756-9

    authors: Ma Y,Zhang C,Chen X,Jiang H,Pan S,Easteal AJ,Sun X

    更新日期:2012-06-01 00:00:00

  • Formulation and development of extended-release micro particulate drug delivery system of solubilized rifaximin.

    abstract::Rifaximin (RFX), a semi-synthetic antibiotic belonging to BCS class IV category, has been used in the treatment of traveler's diarrhea. An attempt has been made to improve aqueous solubility of RFX in the presence of β-cyclodextrin (β-CD) and hydroxy propyl β-cyclodextrin (HP-β-CD) and control its release in the gut b...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-013-9949-x

    authors: Karanje RV,Bhavsar YV,Jahagirdar KH,Bhise KS

    更新日期:2013-06-01 00:00:00

  • Estimating Shelf Life Through Tolerance Intervals.

    abstract::This paper is a continuation of the research published by the Stability Shelf Life Working Group as chartered under the Product Quality Research Institute. The Working Group was formed in 2006 and disbanded in late 2019. Following the philosophy presented by the Working Group on how to characterize the stability shelf...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01800-2

    authors: Schwenke J,Quinlan M,Stroup W,Forenzo P

    更新日期:2020-10-20 00:00:00