Abstract:
:In many ultrasonic applications frictional effects play an important role (e.g. ultrasonic machining, ultrasonic motors). For optimising the applications in terms of quality, efficiency and lifetime it is important to understand the frictional coupling of the vibrating and the non-vibrating part. This contribution is devoted to give an explanation for the reduction of friction forces which is often observed when ultrasonic vibrations are superimposed to macroscopic motions. Usually adopted coefficients of friction are used for modelling such conditions suggesting special frictional mechanisms for high frequency oscillations, whereas the present paper shows that Coulomb's friction law provides a very good description of the observed phenomena if the kinematics of the system is taken into account. Two systems are investigated. In the first system the ultrasonic and macroscopic movements are parallel and in the second they are perpendicular to each other but also within the plane of contact. Both systems were investigated analytically and experimentally using a specially designed test rig. The measurements confirmed the analytically derived equations and therefore the validity of Coulomb's friction law even for ultrasonic conditions.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Storck H,Littmann W,Wallaschek J,Mracek Mdoi
10.1016/s0041-624x(02)00126-9subject
Has Abstractpub_date
2002-05-01 00:00:00pages
379-83issue
1-8eissn
0041-624Xissn
1874-9968pii
S0041-624X(02)00126-9journal_volume
40pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract::This paper provides a derivation of the Christoffel eigenvalue equation for acoustic wave propagation in an acoustically damped piezoelectric medium. The damping tensor is shown to couple into both the stress and displacement constitutive equations. Application of the quasi-static approximation leads to an additional ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.09.005
更新日期:2006-12-01 00:00:00
abstract::This paper presents the results of the theoretical and 2D FEM modeling excitation and detection of evanescent acoustic waves in piezoelectric plates. By application of 2D ordinary differential equations derived by Auld, we obtained the dispersion curves of A1 and SH1 waves in YX LiNbO3 and YX KNbO3 plates in proximity...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2019.105961
更新日期:2019-11-01 00:00:00
abstract::Fundamental understanding of ultrasound interaction with material discontinuities having closed interfaces has many engineering applications such as nondestructive evaluation of defects like kissing bonds and cracks in critical structural and mechanical components. In this paper, to analyze the acoustic field nonlinea...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.12.007
更新日期:2018-03-01 00:00:00
abstract::Machining temperature is a key factor in ultrasonic vibration-assisted milling as it can significantly influence tool wear rate and residual thermal stresses. In current study, a physics-based analytical predictive model on machining temperature in ultrasonic vibration-assisted milling is proposed, without resorting t...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106212
更新日期:2020-12-01 00:00:00
abstract::Two merits of the surface acoustic wave (SAW) device are its high energy density and small size. However, the driving frequency is around 10 MHz or higher. In spite of the difficulties involved with high frequency, the high energy density is attractive for actuator applications. The SAW linear motor's no load speed an...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(99)00087-6
更新日期:2000-03-01 00:00:00
abstract::Laser ultrasonic is a most promising method for non-destructive evaluation of residual stress. The residual stress of thin steel plate is measured by laser ultrasonic technique. The pre-stress loading device is designed which can easily realize the condition of the specimen being laser ultrasonic tested at the same ti...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.08.013
更新日期:2017-01-01 00:00:00
abstract::The main challenge faced by 3D ultrasonic imaging with 2D array transducers is the large number of elements required to achieve an acceptable level of quality in the images. Therefore, the optimisation of the array layout, in order to reduce the number of active elements in the aperture, has been a research topic in t...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.09.010
更新日期:2010-02-01 00:00:00
abstract::A cylindrical standing wave ultrasonic motor using bending vibration transducer was proposed in this paper. The proposed stator contains a cylinder and a bending vibration transducer. The two combining sites between the cylinder and the transducer locate at the adjacent wave loops of bending vibration of the transduce...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2010.12.007
更新日期:2011-07-01 00:00:00
abstract::Essential to (cardiac) 3D ultrasound are 2D matrix array transducer technology and the associated (two-stage) beam forming. Given the large number of degrees of freedom and the complexity of this problem, simulation tools play an important role. Hereto, the impulse response (IR) method is commonly used. Unfortunately,...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.12.014
更新日期:2014-04-01 00:00:00
abstract::The remote inspection for defects in large metallic elements such as pipes, tubes and plates is a field where guided waves are being applied with success. There are a number of situations where a surface coating is added for corrosion protection or insulation purposes. Since the coating materials are usually viscoelas...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.01.072
更新日期:2004-04-01 00:00:00
abstract::In the present work a general model of the vibrational behavior of the axle of a piezoelectric motor is proposed. In this motor, a cylinder-shaped permanent magnet, which act as a rotor, is pressed in contact with an end of a steel axle by means of the magnetic forces. The other end of the axle is fitted at the center...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.01.080
更新日期:2004-04-01 00:00:00
abstract::The propagation of thickness shear waves in a periodically corrugated quartz crystal plate is investigated in the present paper using a power series expansion technique. In the proposed simulation model, an equivalent continuity of shear stress moment is introduced as an approximation to handle sectional interfaces wi...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.02.004
更新日期:2017-05-01 00:00:00
abstract:BACKGROUND:Generalized coherence factor (GCF) can be adaptively estimated from channel data to suppress sidelobe artifacts. Conventionally, Fast Fourier Transform (FFT) is utilized to calculate the full channel spectrum and suffers from high computation load. In this work, autocorrelation (AR)-based algorithm is utiliz...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.07.015
更新日期:2016-12-01 00:00:00
abstract::This work was devoted to the development of a health monitoring system assigned to aerospace applications. Those applications concerned the detection of damaging impacts and debonding between stiffeners and composite skins, since they are the major causes of in-service damage of aircraft structures. The chosen health ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.01.058
更新日期:2004-04-01 00:00:00
abstract::In this research, the use of powerful sonification is studied in making the extraction of tannins more efficient. A combined extraction-filtration system using sonification was designed and modelled. Preliminary extraction studies were carried out to show the effect of ultrasound in extraction. In these experiments hi...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(99)00163-8
更新日期:2000-03-01 00:00:00
abstract::The method of wave function expansion is adopted to study the three dimensional scattering of a time-harmonic plane progressive sound field obliquely incident upon a multi-layered hollow cylinder with interlaminar bonding imperfection. For the generality of solution, each layer is assumed to be cylindrically orthotrop...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.05.007
更新日期:2009-12-01 00:00:00
abstract::An experimental ultrasonic sonar for use as a sensory aid with blind children is described. Novel signal processing techniques make the aid relatively simple to construct, yet allow many of its parameters to be changed in the field. In particular, the aid has two features, a variable range code and an automatic level...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/0041-624x(79)90010-6
更新日期:1979-01-01 00:00:00
abstract::Angle beam wedge transducers are widely used in nonlinear Rayleigh wave experiments as they can generate Rayleigh wave easily and produce high intensity nonlinear waves for detection. When such a transducer is used, the spurious harmonics (source nonlinearity) and wave diffraction may occur and will affect the measure...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2018.05.004
更新日期:2018-09-01 00:00:00
abstract::This study investigated the effect of LIPUS on fracture healing when fractures were exposed to ultrasound at three axial distances: z=0 mm, 60 mm, and 130 mm. We applied LIPUS to rat fracture at these three axial distances mimicking the exposure condition of human fractures at different depths under the soft tissue. M...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.10.013
更新日期:2014-03-01 00:00:00
abstract::A technique using pulsed High Intensity Focused Ultrasound (HIFU) to destroy deep-seated solid tumors is a promising noninvasive therapeutic approach. A main purpose of this study was to design and test a HIFU transducer suitable for preclinical studies of efficacy of tested, anti-cancer drugs, activated by HIFU beams...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.12.008
更新日期:2017-04-01 00:00:00
abstract::For coupled structures surrounded by heavy fluids, it is difficult to obtain dispersion curves from an eigenvalue analysis, because the external fluid term in the coupled equation includes transcendental functions for frequency and wavenumber. Thus, in this study, the acoustic mass of the external fluid was approximat...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.12.009
更新日期:2018-04-01 00:00:00
abstract::Human umbilical cords were exposed to high amplitude focussed ultrasonic pulses with focal energy densities 0.6 and 0.4 mJ mm-2. The endothelium of the exposed vessel (vein) was examined by means of confocal laser scanning microscopy and scanning electron microscopy. The degree of tissue change ranged from the inducti...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/0041-624x(94)90111-2
更新日期:1994-09-01 00:00:00
abstract::In this paper the study of frequency-dependent ultrasonic attenuation in strongly heterogeneous materials is addressed. To determine the attenuation accurately over a wide frequency range, it is necessary to have suitable excitation techniques. Three kinds of transmitted signals have been analysed, grouped according t...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.09.007
更新日期:2016-02-01 00:00:00
abstract::A laser-based technique for the contact-free generation and detection of strongly nonlinear surface acoustic wave (SAW) pulses with amplitudes limited by the materials strength has been developed. The effects of nonlinear propagation of short elastic surface pulses with finite strength in isotropic solids, such as fus...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.06.002
更新日期:2008-11-01 00:00:00
abstract::This paper presents a study on topology optimization of novel material microstructural configurations to achieve directional elastic wave propagation through maximization of partial band gaps. A waveguide incorporating a periodic-microstructure material may exhibit different propagation properties for the plane elasti...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.07.006
更新日期:2018-01-01 00:00:00
abstract::Images captured during routine clinical transcranial sonography (TCS) examination are of a low resolution, so can be confusing for diagnostic evaluations. Manual segmentation of brain structures (areas of the midbrain and substantia nigra (SN)) that are of special interest cause inter-observer and intra-observer varia...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2012.04.005
更新日期:2013-01-01 00:00:00
abstract::The accurate estimation of time of flight (TOF) of an ultrasonic signal is essential in ultrasonic non-destructive testing (NDT). A novel method for TOF estimation based on the short-time Fourier transform (STFT) is proposed in this paper. Firstly, the time and frequency components of ultrasonic echoes are represented...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106104
更新日期:2020-04-01 00:00:00
abstract::The layer-multiple-scattering method is developed to study wave propagation through two-dimensional lattices of cylindrical inclusions in an elastic medium. The lattices are a series of periodically spaced infinite one-dimensional periodic gratings (or rows) of inclusions. The layer-multiple-scattering method allows t...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.09.002
更新日期:2006-12-01 00:00:00
abstract::Lamb waves are being investigated extensively for structural health monitoring (SHM) because of their characteristics of traveling long distances with little attenuation and sensitivity to minor local damage in structures. However, Lamb waves are dispersive, which results in the complex overlap of waveforms in the dam...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2018.02.011
更新日期:2018-07-01 00:00:00
abstract::Sonoelectrochemistry is undergoing a reemerging activity in the last years with an increasing number of papers appearing in a wide range of peer review journals. Applied studies which cover environmental treatments, synthesis or characterization of nanostructures, polymeric materials synthesis, analytical procedures, ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.09.022
更新日期:2010-02-01 00:00:00