Abstract:
:Essential to (cardiac) 3D ultrasound are 2D matrix array transducer technology and the associated (two-stage) beam forming. Given the large number of degrees of freedom and the complexity of this problem, simulation tools play an important role. Hereto, the impulse response (IR) method is commonly used. Unfortunately, given the large element count of 2D array transducers, simulation times become significant jeopardizing the efficacy of the design process. The aim of this study was therefore to derive a new analytical expression to more efficiently calculate the IR in order to speed up the calculation process. To compare accuracy and computation time, the reference and the proposed method were implemented in MATLAB and contrasted. For all points of observation tested, the IR with both methods was identical. The mean calculation time however reduced in average by a factor of 3.93±0.03 times. The proposed IR method therefore speeds up the calculation time of the IR of an individual transducer element while remaining perfectly accurate. This new expression will be particularly relevant for 2D matrix transducer design where computation times remain currently a bottle neck in the design process.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Ortega A,Tong L,D'hooge Jdoi
10.1016/j.ultras.2013.12.014subject
Has Abstractpub_date
2014-04-01 00:00:00pages
1071-7issue
4eissn
0041-624Xissn
1874-9968pii
S0041-624X(13)00368-5journal_volume
54pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract::Surface and quasi-longitudinal acoustic wave properties have been investigated in potassium titanyl arsenate (KTiOAsO₄, KTA) single crystals for the first time. Surface acoustic wave (SAW) velocity, electromechanical coupling coefficient and power flow angle characteristics have been obtained in rotated Y-cut of KTA c...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.09.019
更新日期:2014-02-01 00:00:00
abstract::Discovery and evaluation concerns of barely visible impact damage in composite materials is a well-known issue in industries using these materials. This work proposes a frequency sweep method where damage assessment is conducted with respect to the time domain. Firstly, a combined linear and nonlinear ultrasound imagi...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2018.10.011
更新日期:2019-03-01 00:00:00
abstract::Although, high resolution, real-time ultrasonic (US) imaging is routinely available, image interpretation is based on grey-level and texture and quantitative evaluation is limited. Other potentially useful diagnostic information from US echoes may include modifications in tissue acoustic parameters (speed, attenuation...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.09.002
更新日期:2005-03-01 00:00:00
abstract::Clinical ultrasound images are often perceived as difficult to interpret due to image blurring and speckle inherent in the ultrasound imaging. But the image quality can be improved by deconvolution using an estimate of the point-spread function. However, it is difficult to obtain a sufficiently accurate estimate of th...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.10.005
更新日期:2009-03-01 00:00:00
abstract::The objective of this paper is to develop a nondestructive method for estimating the fracture toughness (K(IC)) of CrMoV steels used as the rotor material of steam turbines in power plants. To achieve this objective, a number of CrMoV steel samples were heat-treated, and the fracture appearance transition temperature ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(03)00154-9
更新日期:2003-09-01 00:00:00
abstract::This paper presents the influence of ultrasonic beam ray refraction effect on the internal object structure imaging using the ultrasound transmission tomography method (UTT), in parallel ray projection geometry, for ultrasonic pulse run-time measurements. Simulation calculations carried out using specially elaborated ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(99)00137-7
更新日期:2000-03-01 00:00:00
abstract::The accurate estimation of time of flight (TOF) of an ultrasonic signal is essential in ultrasonic non-destructive testing (NDT). A novel method for TOF estimation based on the short-time Fourier transform (STFT) is proposed in this paper. Firstly, the time and frequency components of ultrasonic echoes are represented...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106104
更新日期:2020-04-01 00:00:00
abstract::This paper suggests a method for high-sensitivity damage detection. The method is based on pitch-catch measurements of Lamb waves combined with a baseline subtraction technique in the frequency-wavenumber domain. Small amplitude converted modes, generated during the interaction of propagating waves with damage, can th...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.08.010
更新日期:2014-02-01 00:00:00
abstract::We experimentally demonstrate a very large ultrasonic band gap in a one-dimensional phononic crystal. The structure consists of periodic tungsten pillars fixed to a tailored silicon strip with a layer of epoxy. Combining local resonances and Bragg scattering, the gap ranges from 450kHz to 1250kHz, which corresponds to...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.03.003
更新日期:2017-07-01 00:00:00
abstract::Conventionally, the ultrasonic polar scan (UPS) records the amplitude or time-of-flight in transmission using short ultrasonic pulses for a wide range of incidence angles, resulting in a fingerprint of the critical bulk wave angles of the material at the insonified spot. Here, we investigate the use of quasi-harmonic ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.01.002
更新日期:2015-04-01 00:00:00
abstract::Ultrasonic testing has been used for many decades, proving itself very efficient for detecting defects in many industrial sectors. The desire to apply ultrasonic testing to geometrically complex structures, and to anisotropic, inhomogeneous materials, together with the advent of more powerful electronics and software,...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106330
更新日期:2021-03-01 00:00:00
abstract::To improve the integrated performance of a representative bimodal linear ultrasonic motor under continuous operation, this paper proposes a novel dual-frequency asymmetric excitation method for such motors which can operate under traditional single-phase asymmetric or two-phase symmetric excitation modes. In particula...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106224
更新日期:2020-12-01 00:00:00
abstract::In this work, we investigate the efficiency of graphene production from graphite by ultrasonic-induced exfoliation under different operational conditions. An ultrasonic bath and an ultrasonic horn tip were used, to show how the graphene production efficiency depends on the acoustic intensity and cavitation mechanism u...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2019.105989
更新日期:2020-01-01 00:00:00
abstract::The threshold filter is a frequently used technique in ultrasound B-scan to reject the small echoes contributed from backscattering that blur the tissue interface and reduce the image contrast. Note that using the threshold based on one value would simultaneously destroy local waveform features of the reflection echoe...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.10.007
更新日期:2009-05-01 00:00:00
abstract::The acceptance of broadband ultrasound attenuation (BUA) for the assessment of osteoporosis suffers from a limited understanding of both ultrasound wave propagation through cancellous bone and its exact dependence upon the material and structural properties. It has recently been proposed that ultrasound wave propagati...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.09.009
更新日期:2016-02-01 00:00:00
abstract::The wave propagation of an infinite functionally graded plate in thermal environments is studied using the higher-order shear deformation plate theory. The thermal effects and temperature-dependent material properties are both taken into account. The temperature field considered is assumed to be a uniform distribution...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2011.05.009
更新日期:2011-12-01 00:00:00
abstract::Ultrasound has been used to non-destructively assess the quality of many foods such as meat, fish, vegetables and dairy products. This paper addresses the applications of low intensity ultrasonics in the cheese manufacturing processes and highlights the areas where ultrasonics could be successfully implemented in the ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(02)00085-9
更新日期:2002-05-01 00:00:00
abstract::3D ultrasound is a promising imaging modality for clinical diagnosis and treatment monitoring. Its cost is relatively low in comparison with CT and MRI, no intensive training and radiation protection is required for its operation, and its hardware is movable and can potentially be portable. In this study, we developed...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.05.003
更新日期:2005-01-01 00:00:00
abstract::The design and simulation of power transducers are difficult since piezoelectric, dielectric and elastic properties of ferroelectric materials differ from linear behavior when driven at large levels. This paper is devoted to modeling of a resonant power transducer at a high level of dynamic mechanical stress. The powe...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2011.05.017
更新日期:2011-12-01 00:00:00
abstract::Many sparse signal representation (SSR) algorithms have been developed in the past decade. The advantages of SSR such as compact representations and super resolution lead to the state of the art performance of SSR for processing ultrasonic non-destructive evaluation (NDE) signals. Choosing a suitable SSR algorithm and...
journal_title:Ultrasonics
pub_type: 杂志文章,评审
doi:10.1016/j.ultras.2011.10.001
更新日期:2012-03-01 00:00:00
abstract::In cancellous bone, longitudinal waves often separate into fast and slow waves depending on the alignment of bone trabeculae in the propagation path. This interesting phenomenon becomes an effective tool for the diagnosis of osteoporosis because wave propagation behavior depends on the bone structure. Since the fast w...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.04.011
更新日期:2008-11-01 00:00:00
abstract::This paper deals with the influence of acousto-optic interactions on the displacement measurements performed over transducer array and their effects on the predicted diffraction field. Changes on the temporal/spatial responses and the plane wave decomposition of the displacement are discussed. Modifications made on th...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2003.12.035
更新日期:2004-04-01 00:00:00
abstract::To increase the sensitivity of Lamb waves to hidden corrosion in aircraft structures, a preliminary step is to understand the phenomena governing this interaction. A hybrid model combining a finite element approach and a modal decomposition method is used to investigate the interaction of Lamb modes with corrosion pit...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2007.02.004
更新日期:2007-06-01 00:00:00
abstract::It is now accepted that an effective way to investigate the elastic properties of soft tissues is to generate a localized transient acoustic radiation force and to follow the associated displacements in the time/space domain. Shear waves induced by this stress field are particularly interesting in this kind of medium ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.06.022
更新日期:2006-12-22 00:00:00
abstract::The effect of a weak surface, near-surface and interfacial inhomogeneity on the frequency dependence of the surface wave velocity and of the SH (shear horizontal) wave reflectivity in isotropic elastic media is studied analytically and numerically. The inhomogeneity is modeled as an infinite planar layer with continuo...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.09.001
更新日期:2007-03-01 00:00:00
abstract::Use of in-fiber Fabry-Perot (FP) filters based on fiber Bragg gratings as both sensor as well as an interrogator for enhancing the detection limit of elastic wave sensing is investigated in this paper. The sensitivity of such a demodulation scheme depends on the spectral discrimination of the sensor and interrogator g...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.02.018
更新日期:2015-07-01 00:00:00
abstract::We have developed an ultrasonic array sensor useable for locating air leaks in manned spacecraft and have found that this sensor locates leaks in a 1-m(2) plate to within 2 cm. The sensor consists of a 63-element multiplexed array plus a reference element, all constructed from a single PZT disc and a printed circuit b...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.07.020
更新日期:2006-12-01 00:00:00
abstract::The paper presents the characteristics of vertically polarized surface waves generated in silicon substrate by acoustic coupling of bulk waves excited in a periodically patterned ZnO film on silicon. The finite element simulations are performed on the proposed patterned-ZnO/Si structure and vertically polarized modes ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.01.008
更新日期:2015-05-01 00:00:00
abstract::This paper reports the development of a two-dimensional thick film lead zirconate titanate (PZT) ultrasonic transducer array, operating at frequency approximately 7.5MHz, to demonstrate the potential of this fabrication technique for microparticle manipulation. All layers of the array are screen-printed then sintered ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.05.010
更新日期:2015-09-01 00:00:00
abstract::Machining temperature is a key factor in ultrasonic vibration-assisted milling as it can significantly influence tool wear rate and residual thermal stresses. In current study, a physics-based analytical predictive model on machining temperature in ultrasonic vibration-assisted milling is proposed, without resorting t...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106212
更新日期:2020-12-01 00:00:00