Propagation of elastic waves through two-dimensional lattices of cylindrical empty or water-filled inclusions in an aluminum matrix.

Abstract:

:The layer-multiple-scattering method is developed to study wave propagation through two-dimensional lattices of cylindrical inclusions in an elastic medium. The lattices are a series of periodically spaced infinite one-dimensional periodic gratings (or rows) of inclusions. The layer-multiple-scattering method allows the analysis of the reflection and transmission properties of the two-dimensional lattice, provided those of each row are known. These are later determined by means of an exact multiple scattering formalism based on modal series developments. A new characteristic equation is obtained that describes the Bloch wave propagation into the infinite lattice. Lattices with empty and fluid-filled inclusions are compared. The comparison shows the existence of pass and stop bands due to the resonances of the fluid-filled inclusions. Resonant inclusions allow the opening of narrow pass bands inside phononic stop band, which is an interesting phenomenon for demultiplexing problems. It is worth noting that inclusion resonances have nothing to do with resonances due to defects, as they involve the whole lattice. In addition, it is shown that stop bands, at an oblique incidence, due to a strong coupling between longitudinal and transverse waves, are related to dispersive guided waves that propagate in the direction of the reticular planes of the lattices.

journal_name

Ultrasonics

journal_title

Ultrasonics

authors

Robert S,Conoir JM,Franklin H

doi

10.1016/j.ultras.2006.09.002

subject

Has Abstract

pub_date

2006-12-01 00:00:00

pages

178-87

issue

1-4

eissn

0041-624X

issn

1874-9968

pii

S0041-624X(06)00359-3

journal_volume

45

pub_type

杂志文章
  • Sound field separating on arbitrary surfaces enclosing a sound scatterer based on combined integral equations.

    abstract::To eliminate the limitations of the conventional sound field separation methods which are only applicable to regular surfaces, a sound field separation method based on combined integral equations is proposed to separate sound fields directly in the spatial domain. In virtue of the Helmholtz integral equations for the ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2014.06.007

    authors: Fan Z,Mei D,Yang K,Chen Z

    更新日期:2014-12-01 00:00:00

  • Sparsity-based beamforming to enhance two-dimensional linear-array photoacoustic tomography.

    abstract::In linear-array photoacoustic imaging (PAI), beamforming methods can be used to reconstruct the images. Delay-and-sum (DAS) beamformer is extensively used due to its simple implementation. However, this algorithm results in high level of sidelobes and low resolution. In this paper, it is proposed to form the photoacou...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2019.03.010

    authors: Paridar R,Mozaffarzadeh M,Periyasamy V,Pramanik M,Mehrmohammadi M,Orooji M

    更新日期:2019-07-01 00:00:00

  • Lamb wave propagation in a plate with a grooved surface with several spatial periodicities.

    abstract::In order to investigate non-destructively the bonding between rough plates, the problem of Lamb waves propagating on a rough plate is addressed in this paper. Numerical analysis is performed on periodical gratings made of identical triangular grooves. If the surface profile is made up of grooves with one periodicity, ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2006.05.052

    authors: Leduc D,Morvan B,Hladky AC,Pareige P,Izbicki JL

    更新日期:2006-12-22 00:00:00

  • Dynamic interrogator for elastic wave sensing using Fabry Perot filters based on fiber Bragg gratings.

    abstract::Use of in-fiber Fabry-Perot (FP) filters based on fiber Bragg gratings as both sensor as well as an interrogator for enhancing the detection limit of elastic wave sensing is investigated in this paper. The sensitivity of such a demodulation scheme depends on the spectral discrimination of the sensor and interrogator g...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2015.02.018

    authors: Harish AV,Varghese B,Rao B,Balasubramaniam K,Srinivasan B

    更新日期:2015-07-01 00:00:00

  • How many times should we repeat measuring liver stiffness using shear wave elastography?: 5-repetition versus 10-repetition protocols.

    abstract::The purpose of this study is to evaluate whether a 5-repetition liver stiffness (LS) measurement as the standard protocol of shear wave elastography (SWE) is comparable to a conventional 10-repetition measurement protocol and to identify factors that influence the reliability of the 5-repetition protocol. A total of 3...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2016.08.005

    authors: Choi SH,Jeong WK,Kim Y,Lim S,Kwon JW,Kim TY,Kim MY,Sohn JH

    更新日期:2016-12-01 00:00:00

  • Remote characterization of defects in plates with viscoelastic coatings using guided waves.

    abstract::The remote inspection for defects in large metallic elements such as pipes, tubes and plates is a field where guided waves are being applied with success. There are a number of situations where a surface coating is added for corrosion protection or insulation purposes. Since the coating materials are usually viscoelas...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2004.01.072

    authors: Galán JM,Abascal R

    更新日期:2004-04-01 00:00:00

  • Development of an ultra-portable echo device connected to USB port.

    abstract::In practical cardiology, a stethoscope based auscultation has been used to reveal the patient's clinical status. Recently, several hand-held echo devices are going on market and they are expected to play a role as "visible" auscultation instead of stethoscope. We have developed a portable and inexpensive echo device w...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2003.11.009

    authors: Saijo Y,Nitta S,Kobayashi K,Arai H,Nemoto Y

    更新日期:2004-04-01 00:00:00

  • The design of a high power ultrasonic test cell using finite element modelling techniques.

    abstract::This paper will describe the application of a finite element (FE) code to design a test cell, in which a single transducer is used to generate acoustic cavitation. The FE model comprises a 2-D slice through the centre of the test cell and was used to evaluate the generated pressure fields as a function of frequency. I...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/s0041-624x(02)00453-5

    authors: Gachagan A,Speirs D,McNab A

    更新日期:2003-06-01 00:00:00

  • Signal-to-noise ratio enhancement based on wavelet filtering in ultrasonic testing.

    abstract::In ultrasonic non-destructive testing of materials with a coarse-grained structure the scattering from the grains causes backscattering noise, which masks flaw echoes in the measured signal. Several filtering methods have been proposed for improving the signal-to-noise ratio. In this paper we present a comparative stu...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2009.05.010

    authors: Matz V,Smid R,Starman S,Kreidl M

    更新日期:2009-12-01 00:00:00

  • The influence of the thickness of non-piezoelectric pieces on pre-stressed piezotransducers.

    abstract::The mechanical pre-stress applied in piezotransducers used to generate high power ultrasound is needed to avoid ceramics fracture on traction cycle. Pre-stress levels inferior to 50 MPa can yield resonance shifting due to effectiveness of acoustic coupling between transducer pieces. Symmetrical transducers with differ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/s0041-624x(03)00096-9

    authors: Arnold FJ,Mühlen SS

    更新日期:2003-05-01 00:00:00

  • Time-varying prediction filter for structural noise reduction in ultrasonic NDE.

    abstract::Predominant physical phenomenon in highly scattering materials is the attenuation due to dispersion. Therefore, received echo has high frequencies more severely attenuated than low frequencies and the structural noise can be modeled as a non-stationary random process. Most of the proposed techniques for enhancing the ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2006.05.174

    authors: Izquierdo MA,Hernández MG,Anaya JJ

    更新日期:2006-12-22 00:00:00

  • Experimental study of the influence of different resonators on thermoacoustic conversion performance of a thermoacoustic-Stirling heat engine.

    abstract::In this paper, an experimental study of the effect of the resonator shape on the performance of a traveling-wave thermoacoustic engine is presented. Two different resonators were tested in the thermoacoustic-Stirling heat. One resonator is an iso-diameter one, and the other is a tapered one. To have a reasonable compa...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2006.08.008

    authors: Luo EC,Ling H,Dai W,Yu GY

    更新日期:2006-12-22 00:00:00

  • Research on adaptive temperature control in sound field induced by self-focused concave spherical transducer.

    abstract::Temperature control of hyperthermia treatments is generally implemented with multipoint feedback system comprised of phased-array transducer, which is complicated and high cost. Our simulations to the acoustic field induced by a self-focused concave spherical transducer (0.5MHz, 9cm aperture width, 8.0cm focal length)...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2010.01.006

    authors: Hu J,Qian S,Ding Y

    更新日期:2010-05-01 00:00:00

  • Micromachined ultrasound transducers with improved coupling factors from a CMOS compatible process

    abstract::For medical high frequency acoustic imaging purposes the reduction in size of a single transducer element for one-dimensional and even more for two-dimensional arrays is more and more limited by fabrication and cabling technology. In the fields of industrial distance measurement and simple object recognition low cost ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/s0041-624x(99)00085-2

    authors: Eccardt PC,Niederer K

    更新日期:2000-03-01 00:00:00

  • Analysis of optodynamic sources generated during laser-induced breakdown in water.

    abstract::We propose a method for evaluating the size of the laser-induced breakdown region in water based on the detection and analysis of optodynamic waves. The breakdown region is an optodynamic source of pressure waves that propagate into the surrounding liquid as an ultrasonic pulse. In the experiment the optical breakdown...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2006.05.078

    authors: Petkovsek R,Horvat D,Mocnik G,Terzić M,Mozina J

    更新日期:2006-12-22 00:00:00

  • Integrated performance improvement for a bimodal linear ultrasonic motor using a dual-frequency asymmetric excitation method.

    abstract::To improve the integrated performance of a representative bimodal linear ultrasonic motor under continuous operation, this paper proposes a novel dual-frequency asymmetric excitation method for such motors which can operate under traditional single-phase asymmetric or two-phase symmetric excitation modes. In particula...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2020.106224

    authors: Li X,Huang Y,Zhou L

    更新日期:2020-12-01 00:00:00

  • Experimental investigation of material nonlinearity using the Rayleigh surface waves excited and detected by angle beam wedge transducers.

    abstract::Angle beam wedge transducers are widely used in nonlinear Rayleigh wave experiments as they can generate Rayleigh wave easily and produce high intensity nonlinear waves for detection. When such a transducer is used, the spurious harmonics (source nonlinearity) and wave diffraction may occur and will affect the measure...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2018.05.004

    authors: Zhang S,Li X,Jeong H,Hu H

    更新日期:2018-09-01 00:00:00

  • Weighted non-linear beamformers for low cost 2-element receive ultrasound imaging system.

    abstract::In this paper, the development of modified beamforming methods, Filtered Delay Weight Multiply and Sum (F-DwMAS) and Filtered Delay Euclidian-Weighted Multiply and Sum (F-DewMAS), are reported. These methods were investigated on a minimum-redundancy synthetic aperture technique, called as 2 element Receive Synthetic A...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2020.106293

    authors: Vayyeti A,Thittai AK

    更新日期:2021-02-01 00:00:00

  • Fast beating null strip during the reflection of pulsed Gaussian beams incident at the Rayleigh angle.

    abstract::It is well known that harmonic bounded Gaussian beams undergo a transformation into two bounded beams upon reflection on a solid immersed in a liquid. The effect is known as the Schoch effect and can be found at the Rayleigh angle for thick plates and at the different Lamb angles for thin plates. Here, a study is made...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2006.05.205

    authors: Declercq NF

    更新日期:2006-12-22 00:00:00

  • The effect of the conductivity of a film located near a piezoelectric resonator with a lateral electric field based on the PZT ceramics on its characteristics.

    abstract::In this paper, we investigated theoretically and experimentally the effect of the conductivity of the film located in the immediate vicinity of the free side of a piezoelectric resonator based on the PZT ceramics on its characteristics. It is shown that with increasing the conductivity of the film at first the paralle...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2018.09.016

    authors: Zaitsev BD,Semyonov AP,Teplykh AA,Borodina IA

    更新日期:2019-04-01 00:00:00

  • Identification of material properties of orthotropic elastic cylinders immersed in fluid using vibroacoustic techniques.

    abstract::A numerical study is presented to show the potential for using vibroacoustic-based experiments to identify elastic material properties of orthotropic cylindrical vessels immersed in fluids. Sensitivity analyses and a simulated inverse problem are shown to quantify the potential for material characterization through th...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2008.07.004

    authors: Rosario DE,Brigham JC,Aquino W

    更新日期:2008-11-01 00:00:00

  • Comparison between experimental and 2-D numerical studies of multiple scattering in Inconel600 by means of array probes.

    abstract::Ultrasonic non-destructive testing of polycrystalline structures can be disturbed by scattering at grain boundaries. Understanding and modeling this so-called "structural noise" is crucial for characterization as well as detection purposes. Structural noise can be considered as a fingerprint of the material under inve...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2013.06.012

    authors: Shahjahan S,Rupin F,Aubry A,Chassignole B,Fouquet T,Derode A

    更新日期:2014-01-01 00:00:00

  • Numerical investigation of dispersive behaviors for helical thread waveguides using the semi-analytical isogeometric analysis method.

    abstract::In this paper, we propose a semi-analytical isogeometric analysis(S-IGA) approach in the twist space to investigate the dispersive properties in helical thread waveguides, which combines the advantages of the spectral approach and IGA. The convergence and accuracy of the proposed method are discussed, by comparing S-I...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2017.06.004

    authors: Liu Y,Han Q,Liang Y,Xu G

    更新日期:2018-02-01 00:00:00

  • On the stability of wideband beam patterns with respect to weighting and envelope fluctuations.

    abstract::This paper presents a study on the worsening caused by a random perturbation of the weighting window (modeling, in this way, the uncertainty on the channel sensitivity), or by an alteration of the shape of the transmitted pulse, for a wideband array. In the stability evaluation, main-lobe width and signal to noise rat...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2003.12.006

    authors: Curletto S,Parodi C,Trucco A

    更新日期:2004-04-01 00:00:00

  • Mössbauer and X-ray studies of Fe-powder mechanically alloyed with C using power ultrasonics.

    abstract::The Mössbauer and X-rays analysis of as-received Fe-powder and Fe-powder mechanically alloyed with C using high power ultrasonics were carried out. The powder blend of Fe-powder and graphite was processed in He environment during 5 to 50 h. The dissolution of carbon in iron particles and inhomogeneous distribution of ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2004.01.002

    authors: Nadutov VM,Mordyuk BN,Prokopenko GI,Gavrilenko IS

    更新日期:2004-04-01 00:00:00

  • Estimation of clamping force in high-tension bolts through ultrasonic velocity measurement.

    abstract::The estimation of clamping force has been regarded as the main issue in the maintenance of high-tension bolts. This paper proposes a method which uses the dependency of ultrasonic velocity on stress based on the nonlinear elastic effect. The variation of ultrasonic velocity in the range of actual stress acting in the ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2006.05.190

    authors: Jhang KY,Quan HH,Ha J,Kim NY

    更新日期:2006-12-22 00:00:00

  • Automated quantitative analysis of the shift of frequency spectra generated by attenuated signals from contrast microbubbles.

    abstract::The ultrasound-induced harmonic microbubble response spectrum is known to shift to lower frequencies with increasing tissue attenuation. We hypothesized that this shift could be reproducibly detected in received broadband radiofrequency spectra. We used an automatic Gaussian curve-fitting technique to measure the mean...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/s0041-624x(02)00397-9

    authors: Bartleson VB,Viggen K,Asanuma T,Kinnick RR,Belohlavek M

    更新日期:2003-03-01 00:00:00

  • The applicability of a material-treatment laser pulse in non-destructive evaluations.

    abstract::A practical optodynamic study was performed to determine the usability of different lengths of laser pulses for the generation of ultrasonic transients in a solid material. The aim of the study was to evaluate the possibility of a dual use for a laser pulse-for laser material processing, on the one hand, and for the u...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2006.05.071

    authors: Hrovatin R,Petkovsek R,Diaci J,Mozina J

    更新日期:2006-12-22 00:00:00

  • Influence of bubble clustering on multibubble sonoluminescence.

    abstract::Influence of clustering of cavitation bubbles on multibubble sonoluminescence (MBSL) in standing wave fields is studied through measurement of MBSL intensity with a photomultiplier tube and observation of corresponding bubble behavior with a high-speed video camera and an intensified charge-coupled device one. It is c...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/s0041-624x(02)00193-2

    authors: Hatanaka S,Yasui K,Kozuka T,Tuziuti T,Mitome H

    更新日期:2002-05-01 00:00:00

  • Acoustic streaming in lithotripsy fields: preliminary observation using a particle image velocimetry method.

    abstract::This study considers the acoustic streaming in water produced by a lithotripsy pulse. Particle image velocimetry (PIV) method was employed to visualize the acoustic streaming produced by an electromagnetic shock wave generator using video images of the light scattering particles suspended in water. Visualized streamin...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2005.09.004

    authors: Choi MJ,Doh DH,Hwang TG,Cho CH,Paeng DG,Rim GH,Coleman AJ

    更新日期:2006-02-01 00:00:00