Abstract：
:Ultrasonic non-destructive testing of polycrystalline structures can be disturbed by scattering at grain boundaries. Understanding and modeling this so-called "structural noise" is crucial for characterization as well as detection purposes. Structural noise can be considered as a fingerprint of the material under investigation, since it contains information about its microstructure. The interpretation of experimental data necessitates an accurate comprehension of complex phenomena that occur in multiple scattering media and thus robust scattering models. In particular, numerical models can offer the opportunity to realize parametrical studies on controlled microstructures. However, the ability of the model to simulate wave propagation in complex media must be validated. In that perspective, the main objective of the present work is to evaluate the ability of the finite-element code ATHENA 2D to reproduce typical features of multiple wave scattering in the context of ultrasonic non-destructive evaluation, with an array of sources and receivers. Experiments were carried out with a 64-element array, around 2 MHz. The sample was a mock-up of Inconel600 exhibiting a coarse grain structure with a known grain size distribution. The numerical model of this microstructure is based on Voronoi diagrams. Two physical parameters were used to compare numerical and experimental data: the coherent backscattering peak, and the singular value distribution of the array response matrix. Though the simulations are 2-D, a good agreement was found between simulated and experimental data.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Shahjahan S,Rupin F,Aubry A,Chassignole B,Fouquet T,Derode Adoi
10.1016/j.ultras.2013.06.012subject
Has Abstractpub_date
2014-01-01 00:00:00pages
358-67issue
1eissn
0041-624Xissn
1874-9968pii
S0041-624X(13)00184-4journal_volume
54pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract：:Three-dimensional (3D) elastic wave simulations can be used to investigate and optimize nondestructive evaluation (NDE) and structural health monitoring (SHM) ultrasonic damage detection techniques for aerospace materials. 3D anisotropic elastodynamic finite integration technique (EFIT) has been implemented for ultras...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.05.007
更新日期：2014-01-01 00:00:00
abstract：:Surface acoustic wave (SAW) waveguide resonator is formed by a ring-shaped strip of copper 10 microm wide and approximately 130 microm in diameter embedded into a 0.8 microm thick layer of silica on a silicon wafer. SAWs are excited at one side of the copper ring by a short laser pulse focused into a spatially periodi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2008.04.007
更新日期：2009-01-01 00:00:00
abstract：BACKGROUND:Generalized coherence factor (GCF) can be adaptively estimated from channel data to suppress sidelobe artifacts. Conventionally, Fast Fourier Transform (FFT) is utilized to calculate the full channel spectrum and suffers from high computation load. In this work, autocorrelation (AR)-based algorithm is utiliz...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.07.015
更新日期：2016-12-01 00:00:00
abstract：:Ultrasonic studies of the group of halogens of benzene and particularly dependence of acoustic parameters on the structure of organic liquids, demonstrate some interesting regularities in the group of these compounds in gas and liquid states. In this paper results for five cyclic liquids: bromo-, chloro-, fluoro- and ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.05.146
更新日期：2006-12-22 00:00:00
abstract：:Several aspects of spectral analysis of bubble transients in Doppler ultrasonic decompression data are discussed. The computation of energy density spectra, using fast Fourier transform techniques for analyzing bubble transients, is described. Spectral analysis of data from probes implanted within animals, using a con...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/0041-624x(77)90026-9
更新日期：1977-05-01 00:00:00
abstract：MOTIVATION:Commercial ultrasound machines in the past did not provide the ultrasound researchers access to raw ultrasound data. Lack of this ability has impeded evaluation and clinical testing of novel ultrasound algorithms and applications. OBJECTIVES:Recently, we developed a flexible ultrasound back-end where all th...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2007.11.009
更新日期：2008-07-01 00:00:00
abstract：:As biotechnology develops, techniques for manipulating and separating small particles such as cells and DNA are required in the life sciences. This paper investigates on-chip manipulation of microparticles in small channels by using ultrasonic vibration. The chip consists of a rectangular glass substrate with a cross-...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.11.026
更新日期：2017-08-01 00:00:00
abstract：:Influence of clustering of cavitation bubbles on multibubble sonoluminescence (MBSL) in standing wave fields is studied through measurement of MBSL intensity with a photomultiplier tube and observation of corresponding bubble behavior with a high-speed video camera and an intensified charge-coupled device one. It is c...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(02)00193-2
更新日期：2002-05-01 00:00:00
abstract：:Temperature control of hyperthermia treatments is generally implemented with multipoint feedback system comprised of phased-array transducer, which is complicated and high cost. Our simulations to the acoustic field induced by a self-focused concave spherical transducer (0.5MHz, 9cm aperture width, 8.0cm focal length)...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2010.01.006
更新日期：2010-05-01 00:00:00
abstract：:In practical cardiology, a stethoscope based auscultation has been used to reveal the patient's clinical status. Recently, several hand-held echo devices are going on market and they are expected to play a role as "visible" auscultation instead of stethoscope. We have developed a portable and inexpensive echo device w...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2003.11.009
更新日期：2004-04-01 00:00:00
abstract：:Chemical mechanical polishing (CMP) is the primary method to realize the global planarization of silicon wafer. In order to improve this process, a novel method which combined megasonic vibration to assist chemical mechanical polishing (MA-CMP) is developed in this paper. A matching layer structure of polishing head w...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.04.005
更新日期：2017-09-01 00:00:00
abstract：:Since the identification of micro-cracks in engineering materials is very valuable in understanding the initial and slight changes in mechanical properties of materials under complex working environments, numerical simulations on the propagation of the low frequency S0 Lamb wave in thin plates with randomly distribute...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.04.004
更新日期：2017-08-01 00:00:00
abstract：:A technique using pulsed High Intensity Focused Ultrasound (HIFU) to destroy deep-seated solid tumors is a promising noninvasive therapeutic approach. A main purpose of this study was to design and test a HIFU transducer suitable for preclinical studies of efficacy of tested, anti-cancer drugs, activated by HIFU beams...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.12.008
更新日期：2017-04-01 00:00:00
abstract：:Features of an acoustic energy trapping and outflow in a High-overtone Bulk Acoustic Resonator (HBAR) were considered. On the example of a specified resonator based on a piezoelectric layered structure (PLS) as "Al/AlN/Mo/(100) diamond", the simulation of the propagation of microwave acoustic waves in the range of 10-...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2020.106311
更新日期：2021-03-01 00:00:00
abstract：:The radial variations in the velocity of longitudinal waves propagating through Japanese cedar and Japanese cypress were experimentally investigated. In addition, the tracheid length (TL), microfibril angle (MFA), air-dried density (AD), and moisture content (MC) were measured in order to determine the effect of wood ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2010.10.001
更新日期：2011-04-01 00:00:00
abstract：:The paper investigates the existence of interfacial (Stoneley-type) acoustic waves localised at the internal boundary between two semi-infinite superlattices which are adjoined with each other to form one-dimensional phononic bicrystal. Each superlattice is a periodic sequence of perfectly bonded homogeneous and/or fu...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2020.106237
更新日期：2021-01-01 00:00:00
abstract：:Machining temperature is a key factor in ultrasonic vibration-assisted milling as it can significantly influence tool wear rate and residual thermal stresses. In current study, a physics-based analytical predictive model on machining temperature in ultrasonic vibration-assisted milling is proposed, without resorting t...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2020.106212
更新日期：2020-12-01 00:00:00
abstract：:The acceptance of broadband ultrasound attenuation (BUA) for the assessment of osteoporosis suffers from a limited understanding of both ultrasound wave propagation through cancellous bone and its exact dependence upon the material and structural properties. It has recently been proposed that ultrasound wave propagati...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2015.09.009
更新日期：2016-02-01 00:00:00
abstract：:This paper proposes a new pair of sequences whose cross-correlation values are zero except for the peak value and presents a new modulation method for an ultrasonic Doppler flowmeter with high sensitivity utilizing these sequences. In this method, transmitted and received waves are modulated and demodulated, respectiv...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/0041-624x(79)90023-4
更新日期：1979-11-01 00:00:00
abstract：:State-of-the-art integrally stiffened composite materials, manufactured for use in the next generation of commercial and military aircraft, are increasingly being used for structural components such as wings and fuselages. However, the complexity of the manufacturing processes can produce small variations in the shape...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(02)00254-8
更新日期：2002-12-01 00:00:00
abstract：:The linear wave equation in a lossless medium is time reversible, i.e., every solution p(x, t) has a temporal mirror solution p(x, -t). Analysis shows that time reversal also holds for the lossless nonlinear wave equation. In both cases, time-reversal invariance is violated when losses are present. For nonlinear propa...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(00)00020-2
更新日期：2000-09-01 00:00:00
abstract：:The prediction of the elastic scattering by voids (and cracks) in materials is an important process in structural health monitoring, phononic crystals, metamaterials and non-destructive evaluation/imaging to name a few examples. Earlier analytical theories and numerical computations considered the elastic scattering b...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.06.010
更新日期：2017-11-01 00:00:00
abstract：:This paper presents an original experimental and numerical investigation of acoustic streaming driven by an acoustic beam reflecting on a wall. The water experiment features a 2 MHz acoustic beam totally reflecting on one of the tank glass walls. The velocity field in the plane containing the incident and reflected be...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.02.003
更新日期：2016-05-01 00:00:00
abstract：:The conventional acoustic nonlinear technique to evaluate the contact acoustic nonlinearity (CAN) at solid-solid contact interfaces (e.g., closed cracks), which uses the through-transmission of normally incident bulk waves, is limited in that access to both the inner and outer surfaces of structures for attaching puls...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2012.02.008
更新日期：2012-08-01 00:00:00
abstract：:Interference noising originating from the ultrasonic testing defect signal seriously influences the accuracy of the signal extraction and defect location. Time-frequency analysis methods are mainly used to improve the defects detection resolution. In fact, the S-transform, a hybrid of the Short time Fourier transform ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.09.004
更新日期：2014-02-01 00:00:00
abstract：:Ultrasonic techniques have been used to measure the elastic properties of bone. Eight human tibiae were used to determine and map the elastic properties of cortical and cancellous bone. The present study shows cortical bone to be at least orthotropic in its material symmetry. The mechanical properties of cortical bone...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(96)00078-9
更新日期：1996-12-01 00:00:00
abstract：:Speckle tracking methods overcome the major limitations of current Doppler methods for flow imaging and quantification: angle dependence and aliasing. In this paper, we review the development of speckle tracking, with particular attention to the advantages and limitations of two-dimensional algorithms that use a singl...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(99)00182-1
更新日期：2000-03-01 00:00:00
abstract：:This investigation deals with various new aspects of the sensitivity improvement of a pump-probe laser based acoustic method. A short laser pulse is used to excite a mechanical pulse thermo-elastically. Echoes of these mechanical pulses reaching the surface are causing a slight change of the optical reflectivity. The ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(02)00207-x
更新日期：2002-05-01 00:00:00
abstract：:The effect of a weak surface, near-surface and interfacial inhomogeneity on the frequency dependence of the surface wave velocity and of the SH (shear horizontal) wave reflectivity in isotropic elastic media is studied analytically and numerically. The inhomogeneity is modeled as an infinite planar layer with continuo...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.09.001
更新日期：2007-03-01 00:00:00
abstract：:The film condensation of vapor on a cooled, downward-facing surface is a complex dynamic fluid phenomenon. This paper will describe the theoretical basis, instrumentation approach, and experimental results for a method for ultrasonic monitoring of film condensation. The ultrasound measurement system utilizes a 10 MHz ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(99)00214-0
更新日期：2000-03-01 00:00:00
