Y-shaped jets driven by an ultrasonic beam reflecting on a wall.

Abstract:

:This paper presents an original experimental and numerical investigation of acoustic streaming driven by an acoustic beam reflecting on a wall. The water experiment features a 2 MHz acoustic beam totally reflecting on one of the tank glass walls. The velocity field in the plane containing the incident and reflected beam axes is investigated using Particle Image Velocimetry (PIV). It exhibits an original y-shaped structure: the impinging jet driven by the incident beam is continued by a wall jet, and a second jet is driven by the reflected beam, making an angle with the impinging jet. The flow is also numerically modeled as that of an incompressible fluid undergoing a volumetric acoustic force. This is a classical approach, but the complexity of the acoustic field in the reflection zone, however, makes it difficult to derive an exact force field in this area. Several approximations are thus tested; we show that the observed velocity field only weakly depends on the approximation used in this small region. The numerical model results are in good agreement with the experimental results. The spreading of the jets around their impingement points and the creeping of the wall jets along the walls are observed to allow the interaction of the flow with a large wall surface, which can even extend to the corners of the tank; this could be an interesting feature for applications requiring efficient heat and mass transfer at the wall. More fundamentally, the velocity field is shown to have both similarities and differences with the velocity field in a classical centered acoustic streaming jet. In particular its magnitude exhibits a fairly good agreement with a formerly derived scaling law based on the balance of the acoustic forcing with the inertia due to the flow acceleration along the beam axis.

journal_name

Ultrasonics

journal_title

Ultrasonics

authors

Moudjed B,Botton V,Henry D,Millet S,Ben Hadid H

doi

10.1016/j.ultras.2016.02.003

subject

Has Abstract

pub_date

2016-05-01 00:00:00

pages

33-42

eissn

0041-624X

issn

1874-9968

pii

S0041-624X(16)00018-4

journal_volume

68

pub_type

杂志文章
  • Methods for reducing cutting temperature in ultrasonic cutting of bone.

    abstract::Ultrasonic cutting is widely used in food processing applications to produce a clean and accurate cut. However, it is yet to be adopted as an instrument of choice in orthopaedic applications, mainly due to the high temperatures that can be generated at the cut site and the consequent requirement to use additional cool...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2006.06.046

    authors: Cardoni A,MacBeath A,Lucas M

    更新日期:2006-12-22 00:00:00

  • Ultrasonic geometrical characterization of periodically corrugated surfaces.

    abstract::Accurate characterization of the characteristic dimensions of a periodically corrugated surface using ultrasonic imaging technique is investigated both theoretically and experimentally. The possibility of accurately characterizing the characteristic dimensions is discussed. The condition for accurate characterization ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2012.12.006

    authors: Liu J,Declercq NF

    更新日期:2013-04-01 00:00:00

  • A comparative analysis of multi-pulse techniques in contrast-enhanced ultrasound medical imaging.

    abstract::One of the important issues in the field of ultrasound medical imaging using contrast agents is the development of techniques able to separate the response of the contrast media from that of the biological tissues. In the literature, one can find various solutions involving the use of multiple transmitted signals and ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2008.05.008

    authors: Crocco M,Palmese M,Sciallero C,Trucco A

    更新日期:2009-01-01 00:00:00

  • Elastic constant determination of hardwoods using ultrasonic insertion technique.

    abstract::Ultrasonic insertion technique (IT) is an ultrasonic technique which involves sample immersion in a solution to determine its acoustic properties. IT is normally used to determine the acoustic properties of a medical phantom. We proposed the use of IT as an alternative technique to the common contact ultrasonic techni...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2016.11.025

    authors: Mat Daud AN,Jaafar R,Ayop SK,Yaacob MIH,Rohani MS

    更新日期:2017-03-01 00:00:00

  • Wave propagation of functionally graded material plates in thermal environments.

    abstract::The wave propagation of an infinite functionally graded plate in thermal environments is studied using the higher-order shear deformation plate theory. The thermal effects and temperature-dependent material properties are both taken into account. The temperature field considered is assumed to be a uniform distribution...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2011.05.009

    authors: Sun D,Luo SN

    更新日期:2011-12-01 00:00:00

  • State-of-the-art surface acoustic wave linear motor and its future applications

    abstract::Two merits of the surface acoustic wave (SAW) device are its high energy density and small size. However, the driving frequency is around 10 MHz or higher. In spite of the difficulties involved with high frequency, the high energy density is attractive for actuator applications. The SAW linear motor's no load speed an...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/s0041-624x(99)00087-6

    authors: Kurosawa MK

    更新日期:2000-03-01 00:00:00

  • Effect of spatial dispersion on transient acoustic wave propagation in 3D.

    abstract::Spatial dispersion is the variation of wave speed with wavelength. It sets in when the acoustic wavelength approaches the natural scale of length of the medium, which could, for example, be the lattice constant of a crystal, the repeat distance in a superlattice, or the grain size in a granular material. In centrosymm...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2006.05.215

    authors: Every AG

    更新日期:2006-12-22 00:00:00

  • Bubble oscillation and inertial cavitation in viscoelastic fluids.

    abstract::Non-linear acoustic oscillations of gas bubbles immersed in viscoelastic fluids are theoretically studied. The problem is formulated by considering a constitutive equation of differential type with an interpolated time derivative. With the aid of this rheological model, fluid elasticity, shear thinning viscosity and e...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2005.03.010

    authors: Jiménez-Fernández J,Crespo A

    更新日期:2005-08-01 00:00:00

  • Ultrasound in arc welding: a review.

    abstract::During the last decade, the introduction of ultrasound techniques in arc welding with the intention of improving the operational performance and technical characteristics of the welding processes have been studied intensively. In this work is presented a broad review of the literature surrounding the utilization of th...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2014.10.007

    authors: da Cunha TV,Bohórquez CE

    更新日期:2015-02-01 00:00:00

  • Sparse representation for Lamb-wave-based damage detection using a dictionary algorithm.

    abstract::Lamb waves are being investigated extensively for structural health monitoring (SHM) because of their characteristics of traveling long distances with little attenuation and sensitivity to minor local damage in structures. However, Lamb waves are dispersive, which results in the complex overlap of waveforms in the dam...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2018.02.011

    authors: Wang W,Bao Y,Zhou W,Li H

    更新日期:2018-07-01 00:00:00

  • Quantification of elasticity changes in the myometrium during labor using Supersonic Shear Imaging: a feasibility study.

    abstract::Very little is known about the myometrium's physiology in terms of its elasticity but shear wave elastography could be an efficient tool to better understand it. This could considerably help the prevention of difficult births, the consequences of which are tremendous for neonate morbidity and pathologies. The purpose ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2014.07.013

    authors: Gennisson JL,Muller M,Gabor P,Frydman R,Musset D,Tanter M,Ami O

    更新日期:2015-02-01 00:00:00

  • Dynamic modeling and experimental verification of a piezoelectric part feeder in a structure with parallel bimorph beams.

    abstract::The study is aimed to perform dynamic modeling of a part feeder powered by piezoelectric actuation. This part feeder consists mainly of a horizontal platform vibrated by a pair of parallel piezoelectric bimorph beams. Owing to intermittent impacts with the platform, the transported part on the platform is able to marc...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2007.02.002

    authors: Chao PC,Shen CY

    更新日期:2007-06-01 00:00:00

  • Experimental and numerical study of evanescent waves in the mini stopband of a 1D phononic crystal.

    abstract::This paper deals with the analysis of the guided evanescent waves in stopbands of a 1D phononic crystal (PC). A new numerical implementation is shown in order to get the complex values of the wavenumbers in a frequency range where a gap occurs. The considered phononic system is an aluminum plate with a one-dimensional...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2012.09.009

    authors: Bavencoffe M,Morvan B,Hladky-Hennion AC,Izbicki JL

    更新日期:2013-02-01 00:00:00

  • On the low vibration modes observed in a sphere submitted to a tangential contact force.

    abstract::In this paper we discuss the existence of translational and rotational displacements of a sphere submitted to a tangential contact force. On the basis of the Bogdanov and Skvortsov's works [A.N. Bogdanov, A.T. Skvortsov, Sov. Phys. Acoust. 38 (1992) 224-226.] the dispersion equation has been established and solved for...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2006.07.019

    authors: De Billy M

    更新日期:2006-12-01 00:00:00

  • Influence of electrical boundary conditions on profiles of acoustic field and electric potential of shear-horizontal acoustic waves in potassium niobate plates.

    abstract::The profiles of an acoustic field and electric potential of the forward and backward shear-horizontal (SH) acoustic waves of a higher order propagating in X-Y potassium niobate plate have been theoretically investigated. It has been shown that by changing electrical boundary conditions on a surface of piezoelectric pl...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2018.01.010

    authors: Kuznetsova IE,Nedospasov IA,Kolesov VV,Qian Z,Wang B,Zhu F

    更新日期:2018-05-01 00:00:00

  • Stability of alteplase in presence of cavitation.

    abstract::Several experimental studies have demonstrated that ultrasound (US) can accelerate enzymatic fibrinolysis and this effect is further enhanced in the presence of ultrasound contrast agents (UCA). Although UCA have been shown to be safe when administered to ischemic stroke patients, safety information of these agents in...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2007.10.003

    authors: Soltani A,Prokop AF,Vaezy S

    更新日期:2008-04-01 00:00:00

  • Periodic shock-emission from acoustically driven cavitation clouds: a source of the subharmonic signal.

    abstract::Single clouds of cavitation bubbles, driven by 254kHz focused ultrasound at pressure amplitudes in the range of 0.48-1.22MPa, have been observed via high-speed shadowgraphic imaging at 1×10(6) frames per second. Clouds underwent repetitive growth, oscillation and collapse (GOC) cycles, with shock-waves emitted periodi...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2014.06.011

    authors: Johnston K,Tapia-Siles C,Gerold B,Postema M,Cochran S,Cuschieri A,Prentice P

    更新日期:2014-12-01 00:00:00

  • Mössbauer and X-ray studies of Fe-powder mechanically alloyed with C using power ultrasonics.

    abstract::The Mössbauer and X-rays analysis of as-received Fe-powder and Fe-powder mechanically alloyed with C using high power ultrasonics were carried out. The powder blend of Fe-powder and graphite was processed in He environment during 5 to 50 h. The dissolution of carbon in iron particles and inhomogeneous distribution of ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2004.01.002

    authors: Nadutov VM,Mordyuk BN,Prokopenko GI,Gavrilenko IS

    更新日期:2004-04-01 00:00:00

  • A nondestructive method for estimation of the fracture toughness of CrMoV rotor steels based on ultrasonic nonlinearity.

    abstract::The objective of this paper is to develop a nondestructive method for estimating the fracture toughness (K(IC)) of CrMoV steels used as the rotor material of steam turbines in power plants. To achieve this objective, a number of CrMoV steel samples were heat-treated, and the fracture appearance transition temperature ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/s0041-624x(03)00154-9

    authors: Jeong H,Nahm SH,Jhang KY,Nam YH

    更新日期:2003-09-01 00:00:00

  • Quantitative colour-ultrasonography by means of a computer aided simultaneous tomogram.

    abstract::In this newly developed method, the ultrasonic diagnosis has become quantitative. The data will remain quantitative so far as an image storage tube is used. With the conventional storage type CRT, it is impossible to memorize the reflected echo signals of different strength levels. But with our method, it becomes poss...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/0041-624x(75)90036-0

    authors: Yokoi H,Tatsumi T,Ito K

    更新日期:1975-09-01 00:00:00

  • Biomechanical characterization of ex vivo human brain using ultrasound shear wave spectroscopy.

    abstract::The characterization of brain tissue is crucial to better understand neurological disorders. Mechanical characterization is an emerging tool in that field. The purpose of this work was to validate a transient ultrasound technique aimed at measuring dispersion of mechanical parameters of the brain tissue. The first par...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2017.10.009

    authors: Nicolas E,Callé S,Nicolle S,Mitton D,Remenieras JP

    更新日期:2018-03-01 00:00:00

  • Ultrasonic modification of experimental bruising in the guinea-pig pinna.

    abstract::Both pinnae of anaesthetized male guinea-pigs were contused in a reproducible manner and one immediately treated with 0.75 MHz ultrasound at an average therapeutic intensity of 0.61 W cm-2 for a period of 2 min. The lividity and rate of resorption of the rusultant bruises were measured by a photometric method. The res...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/0041-624x(78)90021-5

    authors: Hustler JE,Zarod AP,Williams AR

    更新日期:1978-09-01 00:00:00

  • The performance and design of ultrasonic vibration system for flexural mode.

    abstract::The matrix method for analyzing flexural vibration system is outlined. The displacement, stress and velocity gain of ultrasonic flexural vibration systems are investigated by transfer matrix method. A design method is given for flexural transducer and vibration system. ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/s0041-624x(00)00034-2

    authors: Zhou G

    更新日期:2000-11-01 00:00:00

  • Annular phased array transducer for preclinical testing of anti-cancer drug efficacy on small animals.

    abstract::A technique using pulsed High Intensity Focused Ultrasound (HIFU) to destroy deep-seated solid tumors is a promising noninvasive therapeutic approach. A main purpose of this study was to design and test a HIFU transducer suitable for preclinical studies of efficacy of tested, anti-cancer drugs, activated by HIFU beams...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2016.12.008

    authors: Kujawska T,Secomski W,Byra M,Postema M,Nowicki A

    更新日期:2017-04-01 00:00:00

  • The analysis of the effect of homogeneous mechanical stress on the acoustic wave propagation in the "La3Ga5SiO14/fused silica" piezoelectric layered structure.

    abstract::The results of computer simulation taking into account the linear and nonlinear material constants have been presented. Study of the influence of external uniaxial mechanical stress on the dispersive characteristics of elastic waves in piezoelectric structures as "La3Ga5SiO14/fused silica" has been executed. The compa...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2014.07.007

    authors: Burkov SI,Zolotova OP,Sorokin BP,Turchin PP

    更新日期:2015-01-01 00:00:00

  • Signal loss of double transmissions of ultrasonic waves through random rough surfaces.

    abstract::This paper establishes a model evaluating the signal loss of double transmitted acoustic beams through random rough liquid-solid surfaces based on Fresnel approximation and the phase-screen approximation. The numerical solution is replaced with a simple analytical solution through using the exponential substitution ap...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2010.05.007

    authors: Chen Z,Yang L

    更新日期:2011-01-01 00:00:00

  • Hypersonic velocity measurement using Brillouin scattering technique. Application to water under high pressure and temperature.

    abstract::This paper presents recent improvement on sound velocity measurements under extreme conditions, illustrated by the hypersonic sound velocity measurements of water up to 723 K and 9 GPa using Brillouin scattering technique. Because water at high pressure and high temperature is chemically very aggressive, these experim...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/j.ultras.2006.05.150

    authors: Decremps F,Datchi F,Polian A

    更新日期:2006-12-22 00:00:00

  • Location of acoustic emission sources generated by air flow

    abstract::The location of continuous acoustic emission sources is a difficult problem of non-destructive testing. This article describes one-dimensional location of continuous acoustic emission sources by using an intelligent locator. The intelligent locator solves a location problem based on learning from examples. To verify w...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/s0041-624x(99)00079-7

    authors: Kosel T,Grabec I I,Muzic P

    更新日期:2000-03-01 00:00:00

  • Numerical predictions and experiments on the free-plate edge mode.

    abstract::In this paper, te edge mode variation is studied with three different methods: the reciprocal work method, already used by Torvik [J. Acoust. Soc. Am. 41 (1967) 346] to model this phenomenon, the S-parameter method and a finite element model that are applied for the first time to the study of the edge resonance. Moreo...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/s0041-624x(02)00391-8

    authors: Le Clezio E,Predoi MV,Castaings M,Hosten B,Rousseau M

    更新日期:2003-01-01 00:00:00

  • Ultrasonic monitoring of film condensation for applications in reduced gravity

    abstract::The film condensation of vapor on a cooled, downward-facing surface is a complex dynamic fluid phenomenon. This paper will describe the theoretical basis, instrumentation approach, and experimental results for a method for ultrasonic monitoring of film condensation. The ultrasound measurement system utilizes a 10 MHz ...

    journal_title:Ultrasonics

    pub_type: 杂志文章

    doi:10.1016/s0041-624x(99)00214-0

    authors: Pedersen PC,Cakareski Z,Hermanson JC

    更新日期:2000-03-01 00:00:00