Abstract：
:Ultrasonic insertion technique (IT) is an ultrasonic technique which involves sample immersion in a solution to determine its acoustic properties. IT is normally used to determine the acoustic properties of a medical phantom. We proposed the use of IT as an alternative technique to the common contact ultrasonic technique: through-transmission technique (TT) for determining the elastic constant of hardwoods in longitudinal, tangential and radial directions. The elastic constant of twelve rectangular-shaped Malaysian hardwoods from three different categories; heavy, medium and light with the density ranging from 602 to 992kgm-3 were determined using IT and TT. Both techniques were carried out at 24.0°C surrounding temperature and utilized 2.25MHz ultrasonic transducers. Data from both techniques were compared to validate the use of the proposed technique. Findings indicated that IT offers consistent and accurate results for, tangential and radial elastic constants (TEC and REC) within 8.89% and 5.86% differences, respectively compared to TT for all tested hardwoods. IT offers an alternative technique for TEC and REC determinations of precious wood samples.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Mat Daud AN,Jaafar R,Ayop SK,Yaacob MIH,Rohani MSdoi
10.1016/j.ultras.2016.11.025subject
Has Abstractpub_date
2017-03-01 00:00:00pages
194-198eissn
0041-624Xissn
1874-9968pii
S0041-624X(16)30342-0journal_volume
75pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract：:Current medical ultrasonic scanning instrumentation permits the display of fine image detail (speckle) which does not transfer useful information but degrades the apparent low contrast resolution in the image. An adaptive two-dimensional filter has been developed which uses local features of image texture to recognize...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/0041-624x(86)90072-7
更新日期：1986-01-01 00:00:00
abstract：:A mathematical model is developed and presented to capture the effect of viscoelastic nature of a material on modulated ultrasound (US) pulses. The model is established by considering perturbation of material elements subject to modulated US pulses and by introducing the exponential relaxation of the perturbed fluid e...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.05.014
更新日期：2014-09-01 00:00:00
abstract：:Our objective was to investigate whether hemorrhage control can be achieved faster when high-intensity focused ultrasound (HIFU) is applied in the presence of ultrasound contrast agents (UCA) as compared to HIFU only application. Incisions (3 cm long and 0.5 cm deep) were produced in the livers of anesthetized rabbits...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.07.018
更新日期：2006-12-01 00:00:00
abstract：:The purpose of this study is to explore the feasibility of time-dependent acoustic impedance measurement by Scanning Acoustic Microscopy (SAM) for analyzing the sodium diffusion. The purpose is motivated by the fact that sodium monitoring is challenging and still in the area of exploratory analysis despite its biologi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2018.12.013
更新日期：2019-04-01 00:00:00
abstract：:To improve the integrated performance of a representative bimodal linear ultrasonic motor under continuous operation, this paper proposes a novel dual-frequency asymmetric excitation method for such motors which can operate under traditional single-phase asymmetric or two-phase symmetric excitation modes. In particula...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2020.106224
更新日期：2020-12-01 00:00:00
abstract：:A numerical study is presented to show the potential for using vibroacoustic-based experiments to identify elastic material properties of orthotropic cylindrical vessels immersed in fluids. Sensitivity analyses and a simulated inverse problem are shown to quantify the potential for material characterization through th...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2008.07.004
更新日期：2008-11-01 00:00:00
abstract：:Even though friction is one of the oldest problems in physics many aspects of friction processes are not clear today. We present an experimental setup, which permits the study of tribological systems by measuring the dissipated heat at the interface of two surfaces during a friction process with a time resolution of 1...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(99)00062-1
更新日期：2000-03-01 00:00:00
abstract：:In this paper, the resonance frequency equation and expression of displacement amplitude magnifications of a full-wave barber ultrasonic horn are obtained. By discussing the relationships between the displacement amplitude magnifications and the geometrical dimensions, the optimized design of the horn for the largest ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2011.12.006
更新日期：2012-07-01 00:00:00
abstract：:Single clouds of cavitation bubbles, driven by 254kHz focused ultrasound at pressure amplitudes in the range of 0.48-1.22MPa, have been observed via high-speed shadowgraphic imaging at 1×10(6) frames per second. Clouds underwent repetitive growth, oscillation and collapse (GOC) cycles, with shock-waves emitted periodi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.06.011
更新日期：2014-12-01 00:00:00
abstract：:We experimentally demonstrate a very large ultrasonic band gap in a one-dimensional phononic crystal. The structure consists of periodic tungsten pillars fixed to a tailored silicon strip with a layer of epoxy. Combining local resonances and Bragg scattering, the gap ranges from 450kHz to 1250kHz, which corresponds to...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.03.003
更新日期：2017-07-01 00:00:00
abstract：:Focused ultrasound holds promise in a large number of therapeutic applications. It has long been known that high intensity focused ultrasound can kill tissue through coagulative necrosis. However, it is only in recent years that practical clinical applications are becoming possible, with the development of high power ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.04.003
更新日期：2004-08-01 00:00:00
abstract：:In medical ultrasound imaging, dynamic range (DR) is defined as the difference between the maximum and minimum values of the displayed signal to display and it is one of the most essential parameters that determine its image quality. Typically, DR is given with a fixed value and adjusted manually by operators, which l...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.09.012
更新日期：2015-02-01 00:00:00
abstract：:In this work, the existence of the optimal working frequency for ultrasonic motors (USMs) is theoretically and experimentally verified for the first time, at which working point the power dissipation of the motors arrives at its minimum value. The mathematical model of the mechanical quality factor is initially deduce...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.04.015
更新日期：2016-08-01 00:00:00
abstract：:Ultrasonic non-destructive testing of polycrystalline structures can be disturbed by scattering at grain boundaries. Understanding and modeling this so-called "structural noise" is crucial for characterization as well as detection purposes. Structural noise can be considered as a fingerprint of the material under inve...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.06.012
更新日期：2014-01-01 00:00:00
abstract：:Several aspects of spectral analysis of bubble transients in Doppler ultrasonic decompression data are discussed. The computation of energy density spectra, using fast Fourier transform techniques for analyzing bubble transients, is described. Spectral analysis of data from probes implanted within animals, using a con...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/0041-624x(77)90026-9
更新日期：1977-05-01 00:00:00
abstract：:B-Scan images have been used as a means of detecting the onset of cavitation in tissues. New echoes appearing during simultaneous sonication with therapeutic ultrasound have often been attributed to bubble formation. In this study temperature rises up to 15 degrees C W-1 cm2 in guinea pig leg (post-mortem) were found,...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/0041-624x(91)90028-7
更新日期：1991-07-01 00:00:00
abstract：:Ultrasonic cutting is widely used in food processing applications to produce a clean and accurate cut. However, it is yet to be adopted as an instrument of choice in orthopaedic applications, mainly due to the high temperatures that can be generated at the cut site and the consequent requirement to use additional cool...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.06.046
更新日期：2006-12-22 00:00:00
abstract：:During the last decade, the introduction of ultrasound techniques in arc welding with the intention of improving the operational performance and technical characteristics of the welding processes have been studied intensively. In this work is presented a broad review of the literature surrounding the utilization of th...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.10.007
更新日期：2015-02-01 00:00:00
abstract：:Angle beam wedge transducers are widely used in nonlinear Rayleigh wave experiments as they can generate Rayleigh wave easily and produce high intensity nonlinear waves for detection. When such a transducer is used, the spurious harmonics (source nonlinearity) and wave diffraction may occur and will affect the measure...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2018.05.004
更新日期：2018-09-01 00:00:00
abstract：:In most of industries as aeronautics, aerospace and nuclear, the main part of the ultrasonic testing is carried out directly in touch with the inspected component. Among others, the cooling piping of French pressurized water reactor comprises many welding components with complex geometry: elbows, butt welds, nozzles. ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(02)00145-2
更新日期：2002-05-01 00:00:00
abstract：:The design and simulation of power transducers are difficult since piezoelectric, dielectric and elastic properties of ferroelectric materials differ from linear behavior when driven at large levels. This paper is devoted to modeling of a resonant power transducer at a high level of dynamic mechanical stress. The powe...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2011.05.017
更新日期：2011-12-01 00:00:00
abstract：:The main challenge faced by 3D ultrasonic imaging with 2D array transducers is the large number of elements required to achieve an acceptable level of quality in the images. Therefore, the optimisation of the array layout, in order to reduce the number of active elements in the aperture, has been a research topic in t...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2009.09.010
更新日期：2010-02-01 00:00:00
abstract：:In this study, we found that microbubbles with diameters of less than 100μm can be easily generated by using a hollow cylindrical ultrasonic horn. Consecutive images of bubbles obtained by using high-speed and high-resolution cameras reveal that a capillary wave is formed on the gas-liquid interface under weak ultraso...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2012.05.010
更新日期：2013-01-01 00:00:00
abstract：:An ultrasonic backscattering model is developed for textured polycrystalline materials with orthotropic or trigonal grains of ellipsoidal shape. The model allows us to simulate realistic microstructures and orthotropic macroscopic material textures resulting from thermomechanical processing for a broad variety of mate...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.02.020
更新日期：2014-09-01 00:00:00
abstract：:In this paper the behaviour of strongly nonlinear waves in axisymmetric resonators is experimentally and numerically studied. Experiments are carried out in a cylindrical cavity, which transversal dimension is bigger than the longitudinal one, excited by a narrow band transducer. The quality factor and displacement am...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2005.02.001
更新日期：2005-08-01 00:00:00
abstract：:Elasticity assessment based on bulk wave velocity (BWV) measurements is the most popular technique to characterize the anisotropic stiffness tensor in cortical bone. Typically, a cuboid bone specimen is cut with its sides along the different anatomical directions. Then, the velocity of shear and longitudinal waves pro...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.05.009
更新日期：2017-09-01 00:00:00
abstract：:Geometrical and material property changes cause deviations in the resonant conditions used for noncollinear wave mixing. These deviations are predicted and observed using the SV(ω1)+L(ω2)→L(ω1+ω2) interaction, where SV and L are the shear vertical and longitudinal waves, respectively, and ω1, ω2 are their frequencies....
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.11.009
更新日期：2015-03-01 00:00:00
abstract：:We present a method to generate sub-microsecond quasi-unipolar pressure pulses. Our approach is based on the laser irradiation of a thin copper wire submerged in water. The acoustic waveforms were recorded using two different, well characterized, wideband detection techniques: piezoelectric and optical interferometry....
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2019.05.002
更新日期：2019-09-01 00:00:00
abstract：:In this paper we discuss the existence of translational and rotational displacements of a sphere submitted to a tangential contact force. On the basis of the Bogdanov and Skvortsov's works [A.N. Bogdanov, A.T. Skvortsov, Sov. Phys. Acoust. 38 (1992) 224-226.] the dispersion equation has been established and solved for...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.07.019
更新日期：2006-12-01 00:00:00
abstract：BACKGROUND AND MOTIVATION:Previous works investigating the radiation force of diverging spherical progressive waves incident upon spherical particles have demonstrated the direction of reversal of the force when the particle is subjected to a curved wave-front. In this communication, the analysis is extended to the cas...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2010.12.004
更新日期：2011-07-01 00:00:00
