Abstract:
:This paper establishes a model evaluating the signal loss of double transmitted acoustic beams through random rough liquid-solid surfaces based on Fresnel approximation and the phase-screen approximation. The numerical solution is replaced with a simple analytical solution through using the exponential substitution approach to remove the nonlinear integral terms. Therefore, the real-time inspection by using C-scan imaging systems of flaws in materials can be achieved through the proposed model. The research results show that the signal loss of double transmissions from random rough surfaces mainly depends on two factors: the root-mean-square (RMS) of the roughness and the depth of the flaw in materials. The experimentally measured signal loss is in good agreement with the theoretical predictions. The evaluation of the signal loss can be useful for improving the accuracy and reliability of the non-destructive testing (NDT).
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Chen Z,Yang Ldoi
10.1016/j.ultras.2010.05.007subject
Has Abstractpub_date
2011-01-01 00:00:00pages
49-56issue
1eissn
0041-624Xissn
1874-9968pii
S0041-624X(10)00086-7journal_volume
51pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract::Cavitation plays important roles in almost all high-intensity focused ultrasound (HIFU) applications. However, current two-dimensional (2D) cavitation mapping could only provide cavitation activity in one plane. This study proposed a three-dimensional (3D) ultrasound plane-by-plane active cavitation mapping (3D-UPACM)...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.04.010
更新日期:2016-07-01 00:00:00
abstract::The threshold filter is a frequently used technique in ultrasound B-scan to reject the small echoes contributed from backscattering that blur the tissue interface and reduce the image contrast. Note that using the threshold based on one value would simultaneously destroy local waveform features of the reflection echoe...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.10.007
更新日期:2009-05-01 00:00:00
abstract::The present analysis extends the previous work on the axial acoustic scattering of a high-order Bessel trigonometric beam (HOBTB) from a fluid sphere [F.G. Mitri, J. Appl. Phys. 109 (2011) 014916] to the generalized case of arbitrary scattering from a fluid sphere placed off-axially. The scattered pressure is expresse...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2012.12.008
更新日期:2013-07-01 00:00:00
abstract::The natural frequencies and distributions of displacement components for the surface vibrational modes in thin isotropic elastic disks are calculated. In particular, the research is focused on even solutions for low-lying resonant vibrations with large angular wave numbers. Several families of modes are found which ar...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.11.002
更新日期:2014-03-01 00:00:00
abstract::In the food industry, ultrasonic cutting is used to improve separation by a reduction of the cutting force. This reduction can be attributed to the modification of tool-workpiece interactions at the cutting edge and along the tool flanks because of the superposition of the cutting movement with ultrasonic vibration of...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.03.001
更新日期:2009-06-01 00:00:00
abstract::The design of a novel, single-axis ultrasonic actuating stage has been proposed. It consists of a movable plate, an edge-driving ultrasonic actuator as an actuating device, and a magnetic Magi encoder as a position sensor. The stage is impelled using a friction-contact mechanism by the ultrasonic actuator with long di...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2007.06.005
更新日期:2007-12-01 00:00:00
abstract::Signal modeling has been proven to be an useful tool to characterize damaged materials under ultrasonic nondestructive evaluation (NDE). In this paper, we introduce a novel digital signal model for ultrasonic NDE of multilayered materials. This model borrows concepts from lattice filter theory, and bridges them to the...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.05.013
更新日期:2015-09-01 00:00:00
abstract::Estimation of the attenuation is important in medical ultrasound not only for correct time-gain compensation but also for tissue characterization. In this paper, the feasibility of a new method for attenuation estimation is tested. The proposed method estimates the attenuation by repeatedly solving the forward wave pr...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.10.008
更新日期:2018-03-01 00:00:00
abstract::The paper presents an equivalent circuit model of the polymer coated surface acoustic wave (SAW) resonators by combining coupling-of-mode (COM) description of SAW resonators and perturbation calculation of SAW propagation under polymer loading. An expression for the motional load produced by polymer coating is deduced...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2010.12.006
更新日期:2011-07-01 00:00:00
abstract::This paper presents a method which combines electromagnetic simulation and ultrasonic simulation to build EMAT array models. For a specific sensor configuration, Lorentz forces are calculated using the finite element method (FEM), which then can feed through to ultrasonic simulations. The propagation of ultrasound wav...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.10.020
更新日期:2016-03-01 00:00:00
abstract::A coordinated theoretical, numerical and experimental study is carried out in an effort to interpret the characteristics of propagating guided Lamb wave modes in presence of a high-density (HD) core region in a honeycomb composite sandwich structure (HCSS). Initially, a two-dimensional (2D) semi-analytical model based...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.05.025
更新日期:2016-09-01 00:00:00
abstract::Guided acoustic waves, such as Lamb waves, are widely applied for material characterization, sensing of liquids and the generation of streaming in liquids. There are numerical simulation tools for the prediction of their propagation near a solid-liquid boundary but a demand for complementary measurement techniques for...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2019.105955
更新日期:2019-11-01 00:00:00
abstract::Lamb waves are being investigated extensively for structural health monitoring (SHM) because of their characteristics of traveling long distances with little attenuation and sensitivity to minor local damage in structures. However, Lamb waves are dispersive, which results in the complex overlap of waveforms in the dam...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2018.02.011
更新日期:2018-07-01 00:00:00
abstract::Electromagnetic-acoustic transducers (EMATs) consist of a magnet and a coil. They are advantageous in some non-destructive evaluation (NDE) applications because no direct contact with the specimen is needed to send and receive ultrasonic waves. However, EMATs commonly require excitation peak powers greater than 1kW an...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.02.009
更新日期:2017-07-01 00:00:00
abstract::This paper presents a study on the wave surfaces of anisotropic solids. In addition to the classical and real rays, which are defined by the normal to the slowness surfaces, it is obtained complex rays, which are associated to specific inhomogeneous plane waves. Referring to the complex Christoffel's equation and to t...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(02)00109-9
更新日期:2002-05-01 00:00:00
abstract::For medical high frequency acoustic imaging purposes the reduction in size of a single transducer element for one-dimensional and even more for two-dimensional arrays is more and more limited by fabrication and cabling technology. In the fields of industrial distance measurement and simple object recognition low cost ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(99)00085-2
更新日期:2000-03-01 00:00:00
abstract::The accurate estimation of time of flight (TOF) of an ultrasonic signal is essential in ultrasonic non-destructive testing (NDT). A novel method for TOF estimation based on the short-time Fourier transform (STFT) is proposed in this paper. Firstly, the time and frequency components of ultrasonic echoes are represented...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106104
更新日期:2020-04-01 00:00:00
abstract::Ultrasonic non-destructive testing of polycrystalline structures can be disturbed by scattering at grain boundaries. Understanding and modeling this so-called "structural noise" is crucial for characterization as well as detection purposes. Structural noise can be considered as a fingerprint of the material under inve...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.06.012
更新日期:2014-01-01 00:00:00
abstract::The paper presents the characteristics of vertically polarized surface waves generated in silicon substrate by acoustic coupling of bulk waves excited in a periodically patterned ZnO film on silicon. The finite element simulations are performed on the proposed patterned-ZnO/Si structure and vertically polarized modes ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.01.008
更新日期:2015-05-01 00:00:00
abstract::In this paper, high-speed photography was used to investigate the intrinsic dynamics of subharmonious surface wave in a vertical vibrated and idealized bidimensional granular layer. Using the high-speed photography, velocity fields of the granular layer at different stages through two cycles were obtained, which show ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.196
更新日期:2006-12-22 00:00:00
abstract::The microwave ablation has become an important manner for tumor treatment. In this paper, we proposed a new method for evaluation of microwave-induced thermal lesions using the wavelet analysis of the mean scatterer spacing (MSS). First, the ultrasonic radiofrequency (RF) data of normal and coagulated porcine liver ti...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.03.018
更新日期:2013-09-01 00:00:00
abstract:OBJECTIVES:The aim of the present study is to investigate the effects of sonodynamic action of hypocrellin B on human breast cancer cells and further explore its underlying mechanisms. METHODS:The cell viability of breast cancer MDA-MB-231 cells was examined by 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium b...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.09.013
更新日期:2017-01-01 00:00:00
abstract:BACKGROUND:Generalized coherence factor (GCF) can be adaptively estimated from channel data to suppress sidelobe artifacts. Conventionally, Fast Fourier Transform (FFT) is utilized to calculate the full channel spectrum and suffers from high computation load. In this work, autocorrelation (AR)-based algorithm is utiliz...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.07.015
更新日期:2016-12-01 00:00:00
abstract::Accurate characterization of the characteristic dimensions of a periodically corrugated surface using ultrasonic imaging technique is investigated both theoretically and experimentally. The possibility of accurately characterizing the characteristic dimensions is discussed. The condition for accurate characterization ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2012.12.006
更新日期:2013-04-01 00:00:00
abstract::The purpose of this research was to develop, implement and verify a measurement technique enabling rapid and dependable characterization of ultrasound hydrophone probes beyond 20 MHz. The technique employs focused acoustic sources to optimize signal-to-noise ratio and spatial averaging correction model to account for ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(02)00166-x
更新日期:2002-05-01 00:00:00
abstract::Elastography is an imaging technique based on strain estimation in soft tissues under quasi-static compression. The stress is usually created by a compression plate, and the target is imaged by an ultrasonic linear array. This configuration is used for breast elastography, and has been investigated both theoretically ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(02)00228-7
更新日期:2002-05-01 00:00:00
abstract::Discovery and evaluation concerns of barely visible impact damage in composite materials is a well-known issue in industries using these materials. This work proposes a frequency sweep method where damage assessment is conducted with respect to the time domain. Firstly, a combined linear and nonlinear ultrasound imagi...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2018.10.011
更新日期:2019-03-01 00:00:00
abstract::We study thickness-shear vibration of a quartz plate connected to two piezoelectric ceramic plates with initial deformations caused by a biasing electric field. The theory for small deformations superposed on finite biasing deformations in an electroelastic body is used. It is shown that the resonant frequencies of th...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2010.07.002
更新日期:2011-02-01 00:00:00
abstract::The acceptance of broadband ultrasound attenuation (BUA) for the assessment of osteoporosis suffers from a limited understanding of both ultrasound wave propagation through cancellous bone and its exact dependence upon the material and structural properties. It has recently been proposed that ultrasound wave propagati...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.09.009
更新日期:2016-02-01 00:00:00
abstract::Experimental results of ultrasound of varying frequency (0.8-5.0 MHz) propagating in cold drawn wires of stainless steel and aluminium ranging in diameter from 0.25 to 1.21 mm are in close agreement with theoretical predictions. This agreement is maintained when the coupling medium between the wire and the ultrasound ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/0041-624x(89)90021-8
更新日期:1989-03-01 00:00:00