Abstract：
:A coordinated theoretical, numerical and experimental study is carried out in an effort to interpret the characteristics of propagating guided Lamb wave modes in presence of a high-density (HD) core region in a honeycomb composite sandwich structure (HCSS). Initially, a two-dimensional (2D) semi-analytical model based on the global matrix method is used to study the response and dispersion characteristics of the HCSS with a soft core. Due to the complex structural characteristics, the study of guided wave (GW) propagation in HCSS with HD-core region inherently poses many challenges. Therefore, a numerical simulation of GW propagation in the HCSS with and without the HD-core region is carried out, using surface-bonded piezoelectric wafer transducer (PWT) network. From the numerical results, it is observed that the presence of HD-core significantly decreases both the group velocity and the amplitude of the received GW signal. Laboratory experiments are then conducted in order to verify the theoretical and numerical results. A good agreement between the theoretical, numerical and experimental results is observed in all the cases studied. An extensive parametric study is also carried out for a range of HD-core sizes and densities in order to study the effect due to the change in size and density of the HD zone on the characteristics of propagating GW modes. It is found that the amplitudes and group velocities of the GW modes decrease with the increase in HD-core width and density.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Sikdar S,Banerjee Sdoi
10.1016/j.ultras.2016.05.025subject
Has Abstractpub_date
2016-09-01 00:00:00pages
86-97eissn
0041-624Xissn
1874-9968pii
S0041-624X(16)30075-0journal_volume
71pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract：:Classically, rotary motors with gears and spindle mechanisms are used to achieve translatory motion. In means of miniaturization and weight reduction piezoelectric linear motors are of interest. Several ultrasonic linear motors found in literature base on the use of two different vibration modes. Most often flexural a...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.05.056
更新日期：2006-12-22 00:00:00
abstract：:An eight-channel ultrasonic detecting device for microbiological quality evaluation of packed liquid foods is presented in this paper. This device makes possible a non-invasive detection of the microbial growth in liquid foods with no need to open the carton-based packages where they are contained. Thermal and humidit...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.07.011
更新日期：2006-12-01 00:00:00
abstract：:Chemical mechanical polishing (CMP) is the primary method to realize the global planarization of silicon wafer. In order to improve this process, a novel method which combined megasonic vibration to assist chemical mechanical polishing (MA-CMP) is developed in this paper. A matching layer structure of polishing head w...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.04.005
更新日期：2017-09-01 00:00:00
abstract：:The propagation of thickness shear waves in a periodically corrugated quartz crystal plate is investigated in the present paper using a power series expansion technique. In the proposed simulation model, an equivalent continuity of shear stress moment is introduced as an approximation to handle sectional interfaces wi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.02.004
更新日期：2017-05-01 00:00:00
abstract：:Signal modeling has been proven to be an useful tool to characterize damaged materials under ultrasonic nondestructive evaluation (NDE). In this paper, we introduce a novel digital signal model for ultrasonic NDE of multilayered materials. This model borrows concepts from lattice filter theory, and bridges them to the...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2015.05.013
更新日期：2015-09-01 00:00:00
abstract：:Traditional rotary corers and sample retrieval mechanisms for planetary drilling suffer from a variety of technical difficulties. A heavy and rigid drillstring must be assembled on-site and deployed with considerable applied preload and torque, and these mechanical loadings are difficult to react in a low gravity envi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2011.06.001
更新日期：2011-12-01 00:00:00
abstract：:This paper presents a method which combines electromagnetic simulation and ultrasonic simulation to build EMAT array models. For a specific sensor configuration, Lorentz forces are calculated using the finite element method (FEM), which then can feed through to ultrasonic simulations. The propagation of ultrasound wav...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2015.10.020
更新日期：2016-03-01 00:00:00
abstract：:Several experimental studies have demonstrated that ultrasound (US) can accelerate enzymatic fibrinolysis and this effect is further enhanced in the presence of ultrasound contrast agents (UCA). Although UCA have been shown to be safe when administered to ischemic stroke patients, safety information of these agents in...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2007.10.003
更新日期：2008-04-01 00:00:00
abstract：:Lithium niobate, LiNbO(3), is a piezoelectric material well known for its high Curie temperature. However, it has often been neglected for use in ultrasonic transducers because of its low electro-mechanical coupling coefficients. Recent advances in signal processing have made this disadvantage less significant and we ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2007.06.001
更新日期：2007-12-01 00:00:00
abstract：:Predominant physical phenomenon in highly scattering materials is the attenuation due to dispersion. Therefore, received echo has high frequencies more severely attenuated than low frequencies and the structural noise can be modeled as a non-stationary random process. Most of the proposed techniques for enhancing the ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.05.174
更新日期：2006-12-22 00:00:00
abstract：:In this study, 3D finite element simulation of ultrasonically-assisted drilling is carried out to analyze the effect of ultrasonic vibrations on common difficulties existed in conventional drilling. Influence of harmonic movement of drill bit on the formation of built-up edge is experimentally evaluated and also discu...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.11.009
更新日期：2017-03-01 00:00:00
abstract：:In the food industry, ultrasonic cutting is used to improve separation by a reduction of the cutting force. This reduction can be attributed to the modification of tool-workpiece interactions at the cutting edge and along the tool flanks because of the superposition of the cutting movement with ultrasonic vibration of...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2009.03.001
更新日期：2009-06-01 00:00:00
abstract：:We develop a new ultrasonic imaging framework for non-destructive testing of an immersed specimen featuring an irregular top surface and demonstrate its capability of accurately depicting the lower surfaces of multiple damages hidden in the specimen. Central to the framework is a multistep angular spectrum approach (A...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2020.106233
更新日期：2020-12-01 00:00:00
abstract：:Features of an acoustic energy trapping and outflow in a High-overtone Bulk Acoustic Resonator (HBAR) were considered. On the example of a specified resonator based on a piezoelectric layered structure (PLS) as "Al/AlN/Mo/(100) diamond", the simulation of the propagation of microwave acoustic waves in the range of 10-...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2020.106311
更新日期：2021-03-01 00:00:00
abstract：:The ultrasound-induced harmonic microbubble response spectrum is known to shift to lower frequencies with increasing tissue attenuation. We hypothesized that this shift could be reproducibly detected in received broadband radiofrequency spectra. We used an automatic Gaussian curve-fitting technique to measure the mean...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(02)00397-9
更新日期：2003-03-01 00:00:00
abstract：:A nonlinear ultrasonic method is proposed based on a group of newly discovered wave triplets where two primary codirectional shear-horizontal SH0 waves mix in a weakly nonlinear plate and generate a cumulative S0 Lamb wave at the sum frequency. Theoretical analyses show that any combination of two primary SH0 waves wh...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2019.04.001
更新日期：2019-07-01 00:00:00
abstract：:In many ultrasound applications-especially in the area of medical diagnostics-conventional sensors and particularly piezoelectric hydrophones do not comply with the requirements for "point detectors". It therefore suggests itself to develop methods, which allow ultrasonic fields to be reconstructed from the spatially ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(02)00346-3
更新日期：2002-08-01 00:00:00
abstract：:The present study is focused on the development and characterization of an innovative substrate to optimize the axial resolution of ultrasonic transducers on a silicon substrate that is dedicated to ultrasound imaging. The substrate must efficiently dampen wave propagation to avoid degradation of the axial resolution ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2019.01.006
更新日期：2019-07-01 00:00:00
abstract：:In this paper, we investigated theoretically and experimentally the effect of the conductivity of the film located in the immediate vicinity of the free side of a piezoelectric resonator based on the PZT ceramics on its characteristics. It is shown that with increasing the conductivity of the film at first the paralle...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2018.09.016
更新日期：2019-04-01 00:00:00
abstract：:In this paper a high intensity focused ultrasound (FUS) phantom model was developed, in order to be used in experiments for Blood Brain Barrier (BBB) disruption. The target was to create a phantom model that represents the disruption of the BBB during ultrasound application. An appropriate experimental setup was creat...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2020.106244
更新日期：2021-02-01 00:00:00
abstract：:We present a method to generate sub-microsecond quasi-unipolar pressure pulses. Our approach is based on the laser irradiation of a thin copper wire submerged in water. The acoustic waveforms were recorded using two different, well characterized, wideband detection techniques: piezoelectric and optical interferometry....
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2019.05.002
更新日期：2019-09-01 00:00:00
abstract：:Ultrasonic standing wave chambers with acoustic pathlengths of 1.1 and 0.62 mm have been constructed. The chambers were driven at frequencies over the range 0.66-12.2 MHz. The behaviour of 2 microns diameter latex microparticles and 5 microns diameter yeast in the chambers has been elucidated. One (flow) chamber had a...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(98)00019-5
更新日期：1998-08-01 00:00:00
abstract：:In practical cardiology, a stethoscope based auscultation has been used to reveal the patient's clinical status. Recently, several hand-held echo devices are going on market and they are expected to play a role as "visible" auscultation instead of stethoscope. We have developed a portable and inexpensive echo device w...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2003.11.009
更新日期：2004-04-01 00:00:00
abstract：:A reformulation of the Thomson-Haskell method is presented for calculating the reflection coefficients of multilayer structure immersing in the coupling fluid. Instead of directly multiplying the layer propagator matrix, the new method splits the layer propagator matrix and excursively determines the interface stiffne...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2012.08.004
更新日期：2012-12-01 00:00:00
abstract：:Mechanical properties of biological tissue represent important diagnostic information and are of histological and pathological relevance. In order to obtain non-invasively mechanical properties of tissue, we developed a real-time strain imaging system for clinical applications. The output data of this system also allo...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.06.007
更新日期：2006-12-22 00:00:00
abstract：:This paper describes an optimization method of the top electrode size for a thin film matrix ultrasonic transducer (M-UT) in the frequency range above 200 MHz. The goal of this work is to design an optimal top electrode size for an M-UT providing the maximal output peak-peak voltage (V(PP)) and the maximal signal-to-n...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2012.10.018
更新日期：2013-03-01 00:00:00
abstract：:An influence of ultrasonic treatment (drawing) on structure, high temperature durability, evaporation and creep behaviours of tungsten single crystal and wires were investigated. A relation of tungsten wires properties with dislocation distribution was determined. ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.02.002
更新日期：2004-04-01 00:00:00
abstract：:The prediction of the elastic scattering by voids (and cracks) in materials is an important process in structural health monitoring, phononic crystals, metamaterials and non-destructive evaluation/imaging to name a few examples. Earlier analytical theories and numerical computations considered the elastic scattering b...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.06.010
更新日期：2017-11-01 00:00:00
abstract：:In this paper, the radial basis function (RBF) collocation method based on the nonlocal Eringen piezoelectricity theory is developed to compute the band structures of nanoscale multilayered piezoelectric phononic crystals taking account of nonlocal interface effects. Detailed calculations are performed for anti-plane ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.09.009
更新日期：2017-01-01 00:00:00
abstract：:The purpose of this study is to explore the feasibility of time-dependent acoustic impedance measurement by Scanning Acoustic Microscopy (SAM) for analyzing the sodium diffusion. The purpose is motivated by the fact that sodium monitoring is challenging and still in the area of exploratory analysis despite its biologi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2018.12.013
更新日期：2019-04-01 00:00:00
