Abstract:
:A nonlinear ultrasonic method is proposed based on a group of newly discovered wave triplets where two primary codirectional shear-horizontal SH0 waves mix in a weakly nonlinear plate and generate a cumulative S0 Lamb wave at the sum frequency. Theoretical analyses show that any combination of two primary SH0 waves whose frequencies sum to the frequency at which the SH0 mode intersects the S0 Lamb wave mode results in an internally resonant secondary S0 Lamb wave. Moreover, the relationship between the frequency combination and the nonlinear Lamb wave generation efficiency is revealed, which guides further engineering applications. Finite element validations are carried out with the aid of a subtraction method for the nonlinear feature extraction. The cumulative effect of the generated S0 Lamb wave at the sum frequency as well as the influence of the frequency combinations on the nonlinear Lamb wave generation efficiency is confirmed. Experiments are performed to validate the proposed method as well as demonstrate its use for material characterization. The experiments require a gel filter to mitigate the influence of the undesired nonlinear sources. With the gel filter, the cumulative effect of the secondary S0 Lamb wave is verified and the corresponding slope is extracted and further used to characterize the material status of the fatigue samples. Results demonstrate the proposed method provides high sensitivity to early fatigue damage, which makes it promising for the further early damage detection applications.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Shan S,Hasanian M,Cho H,Lissenden CJ,Cheng Ldoi
10.1016/j.ultras.2019.04.001subject
Has Abstractpub_date
2019-07-01 00:00:00pages
64-74eissn
0041-624Xissn
1874-9968pii
S0041-624X(18)30714-5journal_volume
96pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract::In the present work a general model of the vibrational behavior of the axle of a piezoelectric motor is proposed. In this motor, a cylinder-shaped permanent magnet, which act as a rotor, is pressed in contact with an end of a steel axle by means of the magnetic forces. The other end of the axle is fitted at the center...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.01.080
更新日期:2004-04-01 00:00:00
abstract::The present study focuses on a possibility for improving NO removal efficiency from flue gas by application of powerful sound waves. The sound waves (frequency 6.9-17.2kHz, intensity 144-160dB) are propagated from Hartmann sound generators to a preheated graphite disk inside a vertical reaction tube (height 1.8m, I.D....
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.06.010
更新日期:2005-02-01 00:00:00
abstract::Clinical ultrasound images are often perceived as difficult to interpret due to image blurring and speckle inherent in the ultrasound imaging. But the image quality can be improved by deconvolution using an estimate of the point-spread function. However, it is difficult to obtain a sufficiently accurate estimate of th...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.10.005
更新日期:2009-03-01 00:00:00
abstract::In order to investigate non-destructively the bonding between rough plates, the problem of Lamb waves propagating on a rough plate is addressed in this paper. Numerical analysis is performed on periodical gratings made of identical triangular grooves. If the surface profile is made up of grooves with one periodicity, ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.052
更新日期:2006-12-22 00:00:00
abstract::One of the fundamental theorems in (optical, acoustical, quantum, gravitational) wave scattering is the optical theorem for plane waves, which relates the extinction cross-section to the forward scattering complex amplitude function. In this analysis, the optical theorem is extended for the case of 3D-beams of arbitra...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.01.006
更新日期:2016-04-01 00:00:00
abstract::The acousto-optic interaction with leaky surface acoustic wave radiation into the bulk of YX-cut LiTaO(3) crystals has been investigated. The light incidence and diffraction angles corresponding to the strongest acousto-optic interaction were calculated and measured as functions of the acoustic wave frequency. The dep...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2011.12.004
更新日期:2012-07-01 00:00:00
abstract::This paper describes an optimization method of the top electrode size for a thin film matrix ultrasonic transducer (M-UT) in the frequency range above 200 MHz. The goal of this work is to design an optimal top electrode size for an M-UT providing the maximal output peak-peak voltage (V(PP)) and the maximal signal-to-n...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2012.10.018
更新日期:2013-03-01 00:00:00
abstract::The purpose of this research was to develop, implement and verify a measurement technique enabling rapid and dependable characterization of ultrasound hydrophone probes beyond 20 MHz. The technique employs focused acoustic sources to optimize signal-to-noise ratio and spatial averaging correction model to account for ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(02)00166-x
更新日期:2002-05-01 00:00:00
abstract::Ultrasonic standing wave chambers with acoustic pathlengths of 1.1 and 0.62 mm have been constructed. The chambers were driven at frequencies over the range 0.66-12.2 MHz. The behaviour of 2 microns diameter latex microparticles and 5 microns diameter yeast in the chambers has been elucidated. One (flow) chamber had a...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(98)00019-5
更新日期:1998-08-01 00:00:00
abstract::The mechanical pre-stress applied in piezotransducers used to generate high power ultrasound is needed to avoid ceramics fracture on traction cycle. Pre-stress levels inferior to 50 MPa can yield resonance shifting due to effectiveness of acoustic coupling between transducer pieces. Symmetrical transducers with differ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(03)00096-9
更新日期:2003-05-01 00:00:00
abstract::In medical ultrasound imaging, dynamic range (DR) is defined as the difference between the maximum and minimum values of the displayed signal to display and it is one of the most essential parameters that determine its image quality. Typically, DR is given with a fixed value and adjusted manually by operators, which l...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2014.09.012
更新日期:2015-02-01 00:00:00
abstract::This paper describes fabrication and comparison of PMN-PT single crystal, PZT, and PZT-based 1-3 composite ultrasonic transducers for NDE applications. As a front matching layer between test material (Austenite stainless steel, SUS316) and piezoelectric materials, alumina ceramics was selected. The appropriate acousti...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2010.04.001
更新日期:2010-08-01 00:00:00
abstract::Arterial stiffness has been shown to be a good indicator of arterial wall disease. However, a single parameter is insufficient to describe the complex stress-strain relationship of a multi-component, non-linear tissue such as the aorta. We therefore propose a new approach to measure the stress-strain relationship loca...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2010.01.003
更新日期:2010-06-01 00:00:00
abstract::Classically, rotary motors with gears and spindle mechanisms are used to achieve translatory motion. In means of miniaturization and weight reduction piezoelectric linear motors are of interest. Several ultrasonic linear motors found in literature base on the use of two different vibration modes. Most often flexural a...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.056
更新日期:2006-12-22 00:00:00
abstract::A split spectrum processing technique using a novel moving bandwidth minimization (MBM) method was developed to detect multiple specular targets having different spectral characteristics. Mathematical morphology (MM) algorithms were also implemented in order to compare the results. An experimental approach to optimal ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(99)00024-4
更新日期:1999-09-01 00:00:00
abstract::We derive a simple expression, which gives an approximate value of the Rayleigh wave velocity in an isotropic solid. This approximation is five times better than that given by Viktorov. The velocity equation can be easily inverted in order to obtain an accurate determination of the elastic constants. This procedure ca...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.09.006
更新日期:2007-03-01 00:00:00
abstract::Molecular techniques are transforming our understanding of cellular function and disease. However, accurate molecular analysis methods will be limited if the input DNA, RNA, or protein is not derived from pure population of cells or is contaminated by the wrong cells. A novel Ultrasonic Vibration Micro-dissection (UVM...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.06.010
更新日期:2006-12-22 00:00:00
abstract::Predominant physical phenomenon in highly scattering materials is the attenuation due to dispersion. Therefore, received echo has high frequencies more severely attenuated than low frequencies and the structural noise can be modeled as a non-stationary random process. Most of the proposed techniques for enhancing the ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.174
更新日期:2006-12-22 00:00:00
abstract::In spite of many advances in analytical and numerical modeling techniques for solving different engineering problems, an efficient solution technique for wave propagation modeling of an electromagnetic acoustic transducer (EMAT) system is still missing. Distributed point source method (DPSM) is a newly developed semi-...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.12.003
更新日期:2010-05-01 00:00:00
abstract::A surface ultrasonic wave approach was presented for measuring surface stress of brush electro-plating nickel coating specimen, and the influence of coating thickness on surface stress measurement was discussed. In this research, two Rayleigh wave transducers with 5MHz frequency were employed to collect Rayleigh wave ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2012.02.003
更新日期:2012-09-01 00:00:00
abstract::The effect of a weak surface, near-surface and interfacial inhomogeneity on the frequency dependence of the surface wave velocity and of the SH (shear horizontal) wave reflectivity in isotropic elastic media is studied analytically and numerically. The inhomogeneity is modeled as an infinite planar layer with continuo...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.09.001
更新日期:2007-03-01 00:00:00
abstract::Ultrasonic reflection and transmission measurements on saturated, plane-parallel, poroelastic slabs are presented. A data processing technique is proposed to obtain poroelastic parameters from transmission measurements. A special experimental data acquisition and processing technique is applied to minimize the finite ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.10.006
更新日期:2009-03-01 00:00:00
abstract::A method for fabricating disposable membrane hydrophones is presented. The disposable hydrophones are intended for onetime use in such damaging environments as chemically contaminating fluids and high-amplitude (peak amplitude ∼100MPa) shock wave fields, where the use of commercial membrane hydrophones is not recommen...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.05.016
更新日期:2017-11-01 00:00:00
abstract::This paper describes a laser optical technique for the detection of in-plane (IP) motion of ultrasonic waves propagating in solids. This interference-based laser optical technique includes a tiny square indentation with a width of about 30 microm on the sample surface and a relatively simple optical arrangement. The c...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.076
更新日期:2006-12-22 00:00:00
abstract::A localization approach of welded joint damage is proposed based on acoustic emission (AE) beamforming. In this method, a uniform line array is introduced to detect the AE signal of welded joints in specified area. In order to investigate the influence of fillet and crimping commonly existing in a welded plate structu...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.11.002
更新日期:2017-02-01 00:00:00
abstract::Even though friction is one of the oldest problems in physics many aspects of friction processes are not clear today. We present an experimental setup, which permits the study of tribological systems by measuring the dissipated heat at the interface of two surfaces during a friction process with a time resolution of 1...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(99)00062-1
更新日期:2000-03-01 00:00:00
abstract::Intraluminal (within the alimentary tract) thermal surgery has been shown to be a useful therapeutic option when extracorporeal focused ultrasound applicators cannot be used since their beam may not reach the target site. If plane transducers are used for the treatment of alimentary tract tumours, the applicator must ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.01.088
更新日期:2004-04-01 00:00:00
abstract::Ultrasonic vibration has been observed to lower the flow stress necessary to initiate plastic deformation, a phenomenon known as "acoustic softening". This unique effect of ultrasound has been extensively applied in welding, machining, forming of metals, and ultrasonic additive manufacturing to lower the yield stress ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2019.106005
更新日期:2020-03-01 00:00:00
abstract::Traditional rotary corers and sample retrieval mechanisms for planetary drilling suffer from a variety of technical difficulties. A heavy and rigid drillstring must be assembled on-site and deployed with considerable applied preload and torque, and these mechanical loadings are difficult to react in a low gravity envi...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2011.06.001
更新日期:2011-12-01 00:00:00
abstract::The natural frequencies and distributions of displacement components for the surface vibrational modes in thin isotropic elastic disks are calculated. In particular, the research is focused on even solutions for low-lying resonant vibrations with large angular wave numbers. Several families of modes are found which ar...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.11.002
更新日期:2014-03-01 00:00:00