Abstract:
:The prediction of the elastic scattering by voids (and cracks) in materials is an important process in structural health monitoring, phononic crystals, metamaterials and non-destructive evaluation/imaging to name a few examples. Earlier analytical theories and numerical computations considered the elastic scattering by voids in plane waves of infinite extent. However, current research suggesting the use of (limited-diffracting, accelerating and self-healing) Airy acoustical-sheet beams for non-destructive evaluation or imaging applications in elastic solids requires the development of an improved analytical formalism to predict the scattering efficiency used as a priori information in quantitative material characterization. Based on the definition of the time-averaged scattered power flow density, an analytical expression for the scattering efficiency of a cylindrical empty cavity (i.e., void) encased in an elastic medium is derived for compressional and normally-polarized shear-wave Airy beams. The multipole expansion method using cylindrical wave functions is utilized. Numerical computations for the scattering energy efficiency factors for compressional and shear waves illustrate the analysis with particular emphasis on the Airy beam parameters and the non-dimensional frequency, for various elastic materials surrounding the cavity. The ratio of the compressional to the shear wave speed stimulates the generation of elastic resonances, which are manifested as a series of peaks in the scattering efficiency plots. The present analysis provides an improved method for the computations of the scattering energy efficiency factors using compressional and shear-wave Airy beams in elastic materials as opposed to plane waves of infinite extent.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Mitri FGdoi
10.1016/j.ultras.2017.06.010subject
Has Abstractpub_date
2017-11-01 00:00:00pages
100-106eissn
0041-624Xissn
1874-9968pii
S0041-624X(17)30138-5journal_volume
81pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract::The acousto-optic interaction with leaky surface acoustic wave radiation into the bulk of YX-cut LiTaO(3) crystals has been investigated. The light incidence and diffraction angles corresponding to the strongest acousto-optic interaction were calculated and measured as functions of the acoustic wave frequency. The dep...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2011.12.004
更新日期:2012-07-01 00:00:00
abstract::Ultrasonic non-destructive testing of polycrystalline structures can be disturbed by scattering at grain boundaries. Understanding and modeling this so-called "structural noise" is crucial for characterization as well as detection purposes. Structural noise can be considered as a fingerprint of the material under inve...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.06.012
更新日期:2014-01-01 00:00:00
abstract::In this work, we investigate the efficiency of graphene production from graphite by ultrasonic-induced exfoliation under different operational conditions. An ultrasonic bath and an ultrasonic horn tip were used, to show how the graphene production efficiency depends on the acoustic intensity and cavitation mechanism u...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2019.105989
更新日期:2020-01-01 00:00:00
abstract::In practical cardiology, a stethoscope based auscultation has been used to reveal the patient's clinical status. Recently, several hand-held echo devices are going on market and they are expected to play a role as "visible" auscultation instead of stethoscope. We have developed a portable and inexpensive echo device w...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2003.11.009
更新日期:2004-04-01 00:00:00
abstract::This paper proposes a new pair of sequences whose cross-correlation values are zero except for the peak value and presents a new modulation method for an ultrasonic Doppler flowmeter with high sensitivity utilizing these sequences. In this method, transmitted and received waves are modulated and demodulated, respectiv...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/0041-624x(79)90023-4
更新日期:1979-11-01 00:00:00
abstract::In acoustic and ultrasonic non-destructive testing techniques, it is sometimes beneficial to concentrate sound energy at a chosen location in space and at a specific instance in time, for example to improve the signal-to-noise ratio or activate the nonlinearity of damage features. Time Reversal (TR) techniques, taking...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.01.010
更新日期:2016-04-01 00:00:00
abstract::The characterization of brain tissue is crucial to better understand neurological disorders. Mechanical characterization is an emerging tool in that field. The purpose of this work was to validate a transient ultrasound technique aimed at measuring dispersion of mechanical parameters of the brain tissue. The first par...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.10.009
更新日期:2018-03-01 00:00:00
abstract::In the food industry, ultrasonic cutting is used to improve separation by a reduction of the cutting force. This reduction can be attributed to the modification of tool-workpiece interactions at the cutting edge and along the tool flanks because of the superposition of the cutting movement with ultrasonic vibration of...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.03.001
更新日期:2009-06-01 00:00:00
abstract::Transducer is the necessary and most important part in the maxonics. New applications demand for new transducer, and the renovation of the transducer will open a new field for the application of the maxonics. The important method to develop new transducer is to find and develop new material. The rare earth giant magne...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.128
更新日期:2006-12-22 00:00:00
abstract::Over the last two decades, more efficient transducers were developed for the generation and reception of air-borne ultrasound, thus enabling the non-contact, non-contaminating inspection of composite laminates and honeycomb structures widely used in the aerospace industry. This paper presents the fundamentals of makin...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.091
更新日期:2006-12-22 00:00:00
abstract::In ultrasonic non-destructive testing of materials with a coarse-grained structure the scattering from the grains causes backscattering noise, which masks flaw echoes in the measured signal. Several filtering methods have been proposed for improving the signal-to-noise ratio. In this paper we present a comparative stu...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.05.010
更新日期:2009-12-01 00:00:00
abstract::Ultrasonic reflection and transmission measurements on saturated, plane-parallel, poroelastic slabs are presented. A data processing technique is proposed to obtain poroelastic parameters from transmission measurements. A special experimental data acquisition and processing technique is applied to minimize the finite ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.10.006
更新日期:2009-03-01 00:00:00
abstract::A novel nanocomposite-inspired in-situ broadband ultrasonic sensor previously developed, with carbon black as the nanofiller and polyvinylidene fluoride as the matrix, was networked for acousto-ultrasonic wave-based passive and active structural health monitoring (SHM). Being lightweight and small, this kind of sensor...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.03.007
更新日期:2017-07-01 00:00:00
abstract::Ultrasonic vibration cutting is an efficient cutting process for mechanical micro-machining. This process can generate intricate surface textures with different geometric characteristics. Micro-grooves/micro-channels are among the most frequently encountered micro-structures and, as such, are the focus of this paper. ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.12.016
更新日期:2016-04-01 00:00:00
abstract::The motivation for this research stems from a need for providing a non-destructive testing method capable of detecting and locating any defects and microstructural variations within armour ceramic components before issuing them to the soldiers who rely on them for their survival. The development of an automated ultras...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.05.027
更新日期:2015-09-01 00:00:00
abstract::The radial variations in the velocity of longitudinal waves propagating through Japanese cedar and Japanese cypress were experimentally investigated. In addition, the tracheid length (TL), microfibril angle (MFA), air-dried density (AD), and moisture content (MC) were measured in order to determine the effect of wood ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2010.10.001
更新日期:2011-04-01 00:00:00
abstract::During the last decade, the introduction of ultrasound techniques in arc welding with the intention of improving the operational performance and technical characteristics of the welding processes have been studied intensively. In this work is presented a broad review of the literature surrounding the utilization of th...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2014.10.007
更新日期:2015-02-01 00:00:00
abstract::The importance of the analysis of the radiofrequency signal is by now recognized in the field of tissue characterization via ultrasound. The RF signal contains a wealth of information and structural details that are usually lost in the B-Mode representation. The HyperSPACE (Hyper SPectral Analysis for Characterization...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.02.010
更新日期:2016-05-01 00:00:00
abstract::The study is aimed to perform dynamic modeling of a part feeder powered by piezoelectric actuation. This part feeder consists mainly of a horizontal platform vibrated by a pair of parallel piezoelectric bimorph beams. Owing to intermittent impacts with the platform, the transported part on the platform is able to marc...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2007.02.002
更新日期:2007-06-01 00:00:00
abstract::The main component of every device used for investigating internal object structure by Ultrasound Transmission Tomography (UTT) is a special ultrasonic probe. This paper presents the structure of model multielement ring probe for examining objects using this method in divergent ray projection geometry. The probe is ma...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.126
更新日期:2006-12-22 00:00:00
abstract::We developed SH (shear horizontal) surface acoustic wave (SAW) sensors to detect protein molecules in liquid solutions applying a particular antibody thin film on the delay line of transverse SAW devices. The antibody investigated was human-immuno-globulin G (HigG) to hold the antigens (anti-HigG) in the protein solut...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.01.039
更新日期:2004-04-01 00:00:00
abstract::The present study is focused on the development and characterization of an innovative substrate to optimize the axial resolution of ultrasonic transducers on a silicon substrate that is dedicated to ultrasound imaging. The substrate must efficiently dampen wave propagation to avoid degradation of the axial resolution ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2019.01.006
更新日期:2019-07-01 00:00:00
abstract::It has been established that structural changes in a ferrofluid (formation of clusters) upon the effect of an external magnetic field can be effectively studied by ultrasound spectroscopy. In particular, the resonance absorption of ultrasonic waves enables detection and determination of the size of spherical clusters....
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(02)00117-8
更新日期:2002-05-01 00:00:00
abstract::In this paper, an optimization method aimed at designing aperiodic linear sparse arrays is proposed that is based on the stochastic optimization methodology called simulated annealing. Such a method optimizes the positions and the weight coefficients of each element of a linear array in order to obtain a beam pattern ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(99)00089-x
更新日期:2000-03-01 00:00:00
abstract::We develop a new ultrasonic imaging framework for non-destructive testing of an immersed specimen featuring an irregular top surface and demonstrate its capability of accurately depicting the lower surfaces of multiple damages hidden in the specimen. Central to the framework is a multistep angular spectrum approach (A...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106233
更新日期:2020-12-01 00:00:00
abstract::The focus of contrast-enhanced ultrasound research has developed beyond visualizing the blood pool and its flow to new areas such as perfusion imaging, drug and gene therapy, and targeted imaging. In this work comparison between the application of polymer- and phospholipid-shelled ultrasound contrast agents (UCAs) for...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2010.05.006
更新日期:2011-01-01 00:00:00
abstract::This investigation deals with various new aspects of the sensitivity improvement of a pump-probe laser based acoustic method. A short laser pulse is used to excite a mechanical pulse thermo-elastically. Echoes of these mechanical pulses reaching the surface are causing a slight change of the optical reflectivity. The ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(02)00207-x
更新日期:2002-05-01 00:00:00
abstract::Lithium niobate, LiNbO(3), is a piezoelectric material well known for its high Curie temperature. However, it has often been neglected for use in ultrasonic transducers because of its low electro-mechanical coupling coefficients. Recent advances in signal processing have made this disadvantage less significant and we ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2007.06.001
更新日期:2007-12-01 00:00:00
abstract::Clinical ultrasound images are often perceived as difficult to interpret due to image blurring and speckle inherent in the ultrasound imaging. But the image quality can be improved by deconvolution using an estimate of the point-spread function. However, it is difficult to obtain a sufficiently accurate estimate of th...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.10.005
更新日期:2009-03-01 00:00:00
abstract::The linear wave equation in a lossless medium is time reversible, i.e., every solution p(x, t) has a temporal mirror solution p(x, -t). Analysis shows that time reversal also holds for the lossless nonlinear wave equation. In both cases, time-reversal invariance is violated when losses are present. For nonlinear propa...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(00)00020-2
更新日期:2000-09-01 00:00:00