Abstract：
:During the last decade, the introduction of ultrasound techniques in arc welding with the intention of improving the operational performance and technical characteristics of the welding processes have been studied intensively. In this work is presented a broad review of the literature surrounding the utilization of this technique. Firstly, we discuss the use of traditional mechanical transducers to generate ultrasound in arc welding. Furthermore, we describe the various methods and their application in arc-welding processes. After, is presented a recent method of introducing ultrasonic energy in arc welding, which forms a potential alternative to the use of traditional mechanical type transducers. This method was originally developed in the late 1990s and is called arc with ultrasonic excitation of current. Here, the arc acts not only as a thermal source but also as an emission mechanism for ultrasound, acting directly on the weld pool. We presented and discussed various innovative concepts based on this method, which allows the introduction of ultrasonic energy in the arc welding without the need of any auxiliary device of welding. In addition, we also presented the variations of this method reported in the literature. Finally, we have described the respective effects attributed to the use of this method in the welding of different materials using various welding processes.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
da Cunha TV,Bohórquez CEdoi
10.1016/j.ultras.2014.10.007subject
Has Abstractpub_date
2015-02-01 00:00:00pages
201-9eissn
0041-624Xissn
1874-9968pii
S0041-624X(14)00292-3journal_volume
56pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract：:In this paper, the development of modified beamforming methods, Filtered Delay Weight Multiply and Sum (F-DwMAS) and Filtered Delay Euclidian-Weighted Multiply and Sum (F-DewMAS), are reported. These methods were investigated on a minimum-redundancy synthetic aperture technique, called as 2 element Receive Synthetic A...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2020.106293
更新日期：2021-02-01 00:00:00
abstract：:Since the identification of micro-cracks in engineering materials is very valuable in understanding the initial and slight changes in mechanical properties of materials under complex working environments, numerical simulations on the propagation of the low frequency S0 Lamb wave in thin plates with randomly distribute...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.04.004
更新日期：2017-08-01 00:00:00
abstract：:The aim of this paper is to investigate propagation characteristics and the generation mechanism of the nonlinear lowest-order symmetric Lamb mode (S0) which propagates downslope in free elastic plates with slowly linearly varying-thickness. From theoretical analyses, in a low frequency-thickness product (fd) range, t...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2018.11.013
更新日期：2019-04-01 00:00:00
abstract：:This work is concerned with the reconstruction, from measured (synthetic or real) data, of a 2D penetrable fluid-like object of arbitrary cross-section embedded in a fluid of infinite extent and insonified by a plane acoustic wave. Green's theorem is used to provide a domain integral representation of the scattered fi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(00)00054-8
更新日期：2001-03-01 00:00:00
abstract：:Ultrasonic cutting is widely used in food processing applications to produce a clean and accurate cut. However, it is yet to be adopted as an instrument of choice in orthopaedic applications, mainly due to the high temperatures that can be generated at the cut site and the consequent requirement to use additional cool...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.06.046
更新日期：2006-12-22 00:00:00
abstract：:In order to guide the needle to the correct location in 3D US-guided brachytherapy, the needle is continuously tracked as it is being inserted. A pre-scan before the needle insertion and a post-scan after the needle insertion are subtracted to obtain a difference image containing the needle. The image is projected alo...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.07.003
更新日期：2006-12-22 00:00:00
abstract：:This paper presents a study on the wave surfaces of anisotropic solids. In addition to the classical and real rays, which are defined by the normal to the slowness surfaces, it is obtained complex rays, which are associated to specific inhomogeneous plane waves. Referring to the complex Christoffel's equation and to t...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(02)00109-9
更新日期：2002-05-01 00:00:00
abstract：:The aim of this work was to show the applicability of light diffraction tomography on airborne ultrasound in the frequency range 40 kHz-2 MHz. Seven different air-coupled transducers were measured to show the method's performance regarding linearity, absolute pressure measurements, phase measurements, frequency respon...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(99)00168-7
更新日期：2000-01-01 00:00:00
abstract：:Several aspects of spectral analysis of bubble transients in Doppler ultrasonic decompression data are discussed. The computation of energy density spectra, using fast Fourier transform techniques for analyzing bubble transients, is described. Spectral analysis of data from probes implanted within animals, using a con...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/0041-624x(77)90026-9
更新日期：1977-05-01 00:00:00
abstract：:Laser ultrasonic is a most promising method for non-destructive evaluation of residual stress. The residual stress of thin steel plate is measured by laser ultrasonic technique. The pre-stress loading device is designed which can easily realize the condition of the specimen being laser ultrasonic tested at the same ti...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.08.013
更新日期：2017-01-01 00:00:00
abstract：:Machining temperature is a key factor in ultrasonic vibration-assisted milling as it can significantly influence tool wear rate and residual thermal stresses. In current study, a physics-based analytical predictive model on machining temperature in ultrasonic vibration-assisted milling is proposed, without resorting t...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2020.106212
更新日期：2020-12-01 00:00:00
abstract：:This paper presents a method which combines electromagnetic simulation and ultrasonic simulation to build EMAT array models. For a specific sensor configuration, Lorentz forces are calculated using the finite element method (FEM), which then can feed through to ultrasonic simulations. The propagation of ultrasound wav...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2015.10.020
更新日期：2016-03-01 00:00:00
abstract：PURPOSE:Human 8-oxoguanine DNA glycosylase (OGG1) is a major base excision repair enzyme, and it was reported to suppress the activation of intrinsic apoptotic signaling pathway in response to oxidative stress. In this study, our aim was to investigate the effects of OGG1 downregulation on ultrasound-induced apoptosis ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.07.005
更新日期：2016-12-01 00:00:00
abstract：:Cones and wedges inserted between an ultrasonic transducer and the specimen provide the transducer (circular or rectangular shape) with enhanced capability for point or line contact with the specimen. Such an arrangement is useful in that the transducer can be used for transmitting to and receiving from a point (or li...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.10.002
更新日期：2005-03-01 00:00:00
abstract：:Shear-Horizontally (SH) polarized, ultrasonic, guided wave modes are considered in order to infer changes in the adhesive properties at several interfaces located within an adhesive bond joining two metallic plates. Specific aluminium lap-joint samples were produced, with different adhesive properties at up to four in...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.03.002
更新日期：2014-09-01 00:00:00
abstract：:Signal modeling has been proven to be an useful tool to characterize damaged materials under ultrasonic nondestructive evaluation (NDE). In this paper, we introduce a novel digital signal model for ultrasonic NDE of multilayered materials. This model borrows concepts from lattice filter theory, and bridges them to the...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2015.05.013
更新日期：2015-09-01 00:00:00
abstract：:The acousto-optic interaction with leaky surface acoustic wave radiation into the bulk of YX-cut LiTaO(3) crystals has been investigated. The light incidence and diffraction angles corresponding to the strongest acousto-optic interaction were calculated and measured as functions of the acoustic wave frequency. The dep...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2011.12.004
更新日期：2012-07-01 00:00:00
abstract：:Classically, rotary motors with gears and spindle mechanisms are used to achieve translatory motion. In means of miniaturization and weight reduction piezoelectric linear motors are of interest. Several ultrasonic linear motors found in literature base on the use of two different vibration modes. Most often flexural a...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.05.056
更新日期：2006-12-22 00:00:00
abstract：:A method for fabricating disposable membrane hydrophones is presented. The disposable hydrophones are intended for onetime use in such damaging environments as chemically contaminating fluids and high-amplitude (peak amplitude ∼100MPa) shock wave fields, where the use of commercial membrane hydrophones is not recommen...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.05.016
更新日期：2017-11-01 00:00:00
abstract：:Estimation of the attenuation is important in medical ultrasound not only for correct time-gain compensation but also for tissue characterization. In this paper, the feasibility of a new method for attenuation estimation is tested. The proposed method estimates the attenuation by repeatedly solving the forward wave pr...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.10.008
更新日期：2018-03-01 00:00:00
abstract：:The digital ultrasonic fixed path interferometer designed for testing small amounts of sample was used for the investigation of whole blood coagulation, retraction and clot melting processes. The ultrasound velocity and absorption are determined from the characteristics of an acoustic resonator consisting of an emitte...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/0041-624x(78)90007-0
更新日期：1978-01-01 00:00:00
abstract：:The present study is focused on the development and characterization of an innovative substrate to optimize the axial resolution of ultrasonic transducers on a silicon substrate that is dedicated to ultrasound imaging. The substrate must efficiently dampen wave propagation to avoid degradation of the axial resolution ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2019.01.006
更新日期：2019-07-01 00:00:00
abstract：BACKGROUND:Ultrasound tissue harmonic signal generally provides superior image quality as compared to the linear signal. However, since the generation of the tissue harmonic signal is based on finite amplitude distortion of the propagating waveform, the penetration and the sensitivity in tissue harmonic imaging are mar...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2010.12.008
更新日期：2011-07-01 00:00:00
abstract：:This paper presents a system that accurately measures the distance travelled by ultrasound waves through the air. The simple design of the system and its obtained accuracy provide a tool for non-contact distance measurements required in the laser's optical system that investigates the surface of the eyeball. ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2011.05.011
更新日期：2011-12-01 00:00:00
abstract：:The propagation of thickness shear waves in a periodically corrugated quartz crystal plate is investigated in the present paper using a power series expansion technique. In the proposed simulation model, an equivalent continuity of shear stress moment is introduced as an approximation to handle sectional interfaces wi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.02.004
更新日期：2017-05-01 00:00:00
abstract：:The paper presents the characteristics of vertically polarized surface waves generated in silicon substrate by acoustic coupling of bulk waves excited in a periodically patterned ZnO film on silicon. The finite element simulations are performed on the proposed patterned-ZnO/Si structure and vertically polarized modes ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2015.01.008
更新日期：2015-05-01 00:00:00
abstract：:When casting ceramic items in potteries, liquid 'slip' is passed from a settling tank, through overhead pipelines, before being pumped manually into the moulds. It is not uncommon for bubbles to be introduced into the slip as it passes through the complex piping network, and indeed the presence of bubbles is a major s...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2009.07.008
更新日期：2010-01-01 00:00:00
abstract：:We derive a simple expression, which gives an approximate value of the Rayleigh wave velocity in an isotropic solid. This approximation is five times better than that given by Viktorov. The velocity equation can be easily inverted in order to obtain an accurate determination of the elastic constants. This procedure ca...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.09.006
更新日期：2007-03-01 00:00:00
abstract：:A coordinated theoretical, numerical and experimental study is carried out in an effort to interpret the characteristics of propagating guided Lamb wave modes in presence of a high-density (HD) core region in a honeycomb composite sandwich structure (HCSS). Initially, a two-dimensional (2D) semi-analytical model based...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.05.025
更新日期：2016-09-01 00:00:00
abstract：:In spite of many advances in analytical and numerical modeling techniques for solving different engineering problems, an efficient solution technique for wave propagation modeling of an electromagnetic acoustic transducer (EMAT) system is still missing. Distributed point source method (DPSM) is a newly developed semi-...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2009.12.003
更新日期：2010-05-01 00:00:00
