Abstract：
:In spite of many advances in analytical and numerical modeling techniques for solving different engineering problems, an efficient solution technique for wave propagation modeling of an electromagnetic acoustic transducer (EMAT) system is still missing. Distributed point source method (DPSM) is a newly developed semi-analytical technique developed since 2000 by Placko and Kundu (2007) [12] that is very powerful and straightforward for solving various engineering problems, including acoustic and electromagnetic modeling problems. In this study DPSM has been employed to model the Lorentz type EMAT with a meander line and flat spiral type coil. The problem of wave propagation has been solved and eddy currents and Lorentz forces have been calculated. The displacement field has been obtained as well. While modeling the Lorentz force the effect of dynamic magnetic field has been considered that most current analyses ignore. Results from this analysis have been compared with the finite element method (FEM) based predictions. It should be noted that with the current state of knowledge this problem can be solved only by FEM.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Eskandarzade M,Kundu T,Liebeaux N,Placko D,Mobadersani Fdoi
10.1016/j.ultras.2009.12.003subject
Has Abstractpub_date
2010-05-01 00:00:00pages
583-91issue
6eissn
0041-624Xissn
1874-9968pii
S0041-624X(09)00202-9journal_volume
50pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract：:Estimation of the attenuation is important in medical ultrasound not only for correct time-gain compensation but also for tissue characterization. In this paper, the feasibility of a new method for attenuation estimation is tested. The proposed method estimates the attenuation by repeatedly solving the forward wave pr...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.10.008
更新日期：2018-03-01 00:00:00
abstract：:Guided modes propagation in intact, fractured and healing long bone has drawn significant research interests. However, mode quantifications for the direct comparison are still necessary to address. The aim of the study is to analyze the mode interaction with a notch-fracture in the long bone and find quantitative ultr...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.09.015
更新日期：2014-07-01 00:00:00
abstract：:In linear-array photoacoustic imaging (PAI), beamforming methods can be used to reconstruct the images. Delay-and-sum (DAS) beamformer is extensively used due to its simple implementation. However, this algorithm results in high level of sidelobes and low resolution. In this paper, it is proposed to form the photoacou...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2019.03.010
更新日期：2019-07-01 00:00:00
abstract：:Lithium niobate, LiNbO(3), is a piezoelectric material well known for its high Curie temperature. However, it has often been neglected for use in ultrasonic transducers because of its low electro-mechanical coupling coefficients. Recent advances in signal processing have made this disadvantage less significant and we ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2007.06.001
更新日期：2007-12-01 00:00:00
abstract：:We derive a simple expression, which gives an approximate value of the Rayleigh wave velocity in an isotropic solid. This approximation is five times better than that given by Viktorov. The velocity equation can be easily inverted in order to obtain an accurate determination of the elastic constants. This procedure ca...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.09.006
更新日期：2007-03-01 00:00:00
abstract：:State-of-the-art integrally stiffened composite materials, manufactured for use in the next generation of commercial and military aircraft, are increasingly being used for structural components such as wings and fuselages. However, the complexity of the manufacturing processes can produce small variations in the shape...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(02)00254-8
更新日期：2002-12-01 00:00:00
abstract：:Signal modeling has been proven to be an useful tool to characterize damaged materials under ultrasonic nondestructive evaluation (NDE). In this paper, we introduce a novel digital signal model for ultrasonic NDE of multilayered materials. This model borrows concepts from lattice filter theory, and bridges them to the...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2015.05.013
更新日期：2015-09-01 00:00:00
abstract：:The purpose of this study is to explore the feasibility of time-dependent acoustic impedance measurement by Scanning Acoustic Microscopy (SAM) for analyzing the sodium diffusion. The purpose is motivated by the fact that sodium monitoring is challenging and still in the area of exploratory analysis despite its biologi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2018.12.013
更新日期：2019-04-01 00:00:00
abstract：:In the present work a general model of the vibrational behavior of the axle of a piezoelectric motor is proposed. In this motor, a cylinder-shaped permanent magnet, which act as a rotor, is pressed in contact with an end of a steel axle by means of the magnetic forces. The other end of the axle is fitted at the center...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.01.080
更新日期：2004-04-01 00:00:00
abstract：:A mathematical model is developed and presented to capture the effect of viscoelastic nature of a material on modulated ultrasound (US) pulses. The model is established by considering perturbation of material elements subject to modulated US pulses and by introducing the exponential relaxation of the perturbed fluid e...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.05.014
更新日期：2014-09-01 00:00:00
abstract：:Experimental results of ultrasound of varying frequency (0.8-5.0 MHz) propagating in cold drawn wires of stainless steel and aluminium ranging in diameter from 0.25 to 1.21 mm are in close agreement with theoretical predictions. This agreement is maintained when the coupling medium between the wire and the ultrasound ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/0041-624x(89)90021-8
更新日期：1989-03-01 00:00:00
abstract：:In most applications of MEMS the mechanical properties of the used materials are key parameters for the perfect working of the microsystems. Measuring bulk acoustic waves excited in MEMS structures with ultra-short laser pulses is a powerful method for the accurate and non-destructive evaluation as well as for the cha...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.01.049
更新日期：2004-04-01 00:00:00
abstract：:The results of experimental and theoretical studies of nonlinear acoustic phenomena (amplitude-dependent losses, resonant frequency shifts, damping of weak ultrasonic pulses and their carrier frequency phase delay under action of a powerful low-frequency pumping wave as well as amplitude-phase self-action of the finit...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.07.008
更新日期：2014-02-01 00:00:00
abstract：:Filamentous fungi are used in several industries and in academia to produce antibiotics, metabolites, proteins and pharmaceutical compounds. The development of valuable strains usually requires the insertion of recombinant deoxyribonucleic acid; however, the protocols to transfer DNA to fungal cells are highly ineffic...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.03.003
更新日期：2014-08-01 00:00:00
abstract：:The characterization of brain tissue is crucial to better understand neurological disorders. Mechanical characterization is an emerging tool in that field. The purpose of this work was to validate a transient ultrasound technique aimed at measuring dispersion of mechanical parameters of the brain tissue. The first par...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.10.009
更新日期：2018-03-01 00:00:00
abstract：:Elastography is an imaging technique based on strain estimation in soft tissues under quasi-static compression. The stress is usually created by a compression plate, and the target is imaged by an ultrasonic linear array. This configuration is used for breast elastography, and has been investigated both theoretically ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(02)00228-7
更新日期：2002-05-01 00:00:00
abstract：:Measurements of elastic constants of the austenite phase when approaching the phase transformation either upon cooling or stressing is of the crucial interest for the shape memory alloy field. Acoustic properties (wave velocity and also attenuation changes) of the Cu-Al-Ni single crystal were investigated in situ duri...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.01.029
更新日期：2004-04-01 00:00:00
abstract：:The Total Focusing Method (TFM) yields a focused image in emission and in reception while Phased Array (PA) imaging provides Dynamic Depth Focusing (DDF) in reception only. Besides, most NDE applications have two propagation media, where refraction at the interface complicates time-of-flight (TOF) and focal law comput...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2019.105965
更新日期：2019-11-01 00:00:00
abstract：:We study thickness-shear vibration of a quartz plate connected to two piezoelectric ceramic plates with initial deformations caused by a biasing electric field. The theory for small deformations superposed on finite biasing deformations in an electroelastic body is used. It is shown that the resonant frequencies of th...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2010.07.002
更新日期：2011-02-01 00:00:00
abstract：:Cavitation plays important roles in almost all high-intensity focused ultrasound (HIFU) applications. However, current two-dimensional (2D) cavitation mapping could only provide cavitation activity in one plane. This study proposed a three-dimensional (3D) ultrasound plane-by-plane active cavitation mapping (3D-UPACM)...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.04.010
更新日期：2016-07-01 00:00:00
abstract：:In this paper, an improved touch probe sensor device for higher sensitivity and low contact force is reported. In order to improve the resolution, we have evaluated the sensitivity and fabricated a miniaturized sensor. The sensor transducer was 3 mm long and had higher resonance frequency. The resonance frequency of t...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(02)00091-4
更新日期：2002-05-01 00:00:00
abstract：:The estimation of clamping force has been regarded as the main issue in the maintenance of high-tension bolts. This paper proposes a method which uses the dependency of ultrasonic velocity on stress based on the nonlinear elastic effect. The variation of ultrasonic velocity in the range of actual stress acting in the ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.05.190
更新日期：2006-12-22 00:00:00
abstract：:The purpose of this study was to investigate practical, safe, easy-to-use, non-cytotoxic, and reliable parameters to apply to an ultrasound (US) naked gene therapy system. The ultrasound pressure at the point of cell exposure was measured using a calibrated hydrophone and the intensity calculated. An acoustic power me...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.06.007
更新日期：2004-12-01 00:00:00
abstract：:Nonalcoholic fatty liver disease (NAFLD) is the most common chronic liver disease. Quantitative ultrasound facilitates clinical grading of hepatic steatosis (the early stage of NAFLD). However, the utility of quantitative ultrasound as a first-line method for community screening of hepatic steatosis remains unclear. T...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2020.106329
更新日期：2021-03-01 00:00:00
abstract：:Silver epoxy was selected to bond transducer plates on glass substrates. The properties and thickness of the bonding medium affect the electrical input impedance of the transducer. Thus, the thickness of the silver epoxy bonding layer was used as a design parameter to optimize the structure for the transducer input im...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2011.11.010
更新日期：2012-04-01 00:00:00
abstract：:It is shown that a diffuse field is not devoid of phase information, but has a correlation function equal to the Green's function. More specifically, the cross-correlation between diffuse signals in two transducers is very nearly equal to the direct response of one transducer to an impulse applied to the other. This i...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(02)00156-7
更新日期：2002-05-01 00:00:00
abstract：:In medical ultrasound imaging, dynamic range (DR) is defined as the difference between the maximum and minimum values of the displayed signal to display and it is one of the most essential parameters that determine its image quality. Typically, DR is given with a fixed value and adjusted manually by operators, which l...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.09.012
更新日期：2015-02-01 00:00:00
abstract：:The present study focuses on a possibility for improving NO removal efficiency from flue gas by application of powerful sound waves. The sound waves (frequency 6.9-17.2kHz, intensity 144-160dB) are propagated from Hartmann sound generators to a preheated graphite disk inside a vertical reaction tube (height 1.8m, I.D....
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.06.010
更新日期：2005-02-01 00:00:00
abstract：:The ability to generate short focused ultrasonic pulses with duration on the order of one period of carrier frequency depends on the bandwidth of the transmitter as the pulse duration is inversely proportional to the bandwidth. Conventional focusing arrays used for focusing ultrasound have limited bandwidth due to the...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2008.10.008
更新日期：2009-03-01 00:00:00
abstract：:We experimentally demonstrate a very large ultrasonic band gap in a one-dimensional phononic crystal. The structure consists of periodic tungsten pillars fixed to a tailored silicon strip with a layer of epoxy. Combining local resonances and Bragg scattering, the gap ranges from 450kHz to 1250kHz, which corresponds to...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.03.003
更新日期：2017-07-01 00:00:00
