Abstract:
:Cones and wedges inserted between an ultrasonic transducer and the specimen provide the transducer (circular or rectangular shape) with enhanced capability for point or line contact with the specimen. Such an arrangement is useful in that the transducer can be used for transmitting to and receiving from a point (or line) source, and that it can eliminate the undesirable aperture effect that makes the transducer blind to waves traveling in certain directions and those of certain frequencies. In this paper, a comprehensive numerical analysis based on a wave propagation model is carried out for the study of characteristics and parameters of cones and wedges influencing their performance. We study the effect of the dimensions, shape and aperture on the frequency response and the angle of incidence of the wave. For computational accuracy and efficiency, the boundary element method is used in the analysis.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Rus G,Wooh SC,Gallego Rdoi
10.1016/j.ultras.2004.10.002subject
Has Abstractpub_date
2005-03-01 00:00:00pages
391-5issue
5eissn
0041-624Xissn
1874-9968pii
S0041-624X(04)00300-2journal_volume
43pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract::This paper presents a novel linear piezoelectric motor which is suitable for rapid ultra-precision positioning. The finite element analysis (FEA) was applied for optimal design and further analysis, then experiments were conducted to investigate its performance. By changing the input signal, the proposed motor was fou...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.07.010
更新日期:2016-12-01 00:00:00
abstract::This paper describes a completely non-contact ultrasonic method of gas flow metering using air-coupled leaky Lamb waves. To show proof of principle, a simplified representation of gas flow in a duct, comprising two separated thin isotropic plates with a gas flowing between them, has been modelled and investigated expe...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2018.04.008
更新日期:2018-09-01 00:00:00
abstract:BACKGROUND AND OBJECTIVE:Acoustic scattering properties of ultrasound contrast agents are useful in extending existing or developing new techniques for biomedical imaging applications. A useful first step in this direction is to investigate the acoustic scattering of a new class of acoustic beams, known as helicoidal h...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.09.003
更新日期:2010-03-01 00:00:00
abstract::One of the fundamental theorems in (optical, acoustical, quantum, gravitational) wave scattering is the optical theorem for plane waves, which relates the extinction cross-section to the forward scattering complex amplitude function. In this analysis, the optical theorem is extended for the case of 3D-beams of arbitra...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.01.006
更新日期:2016-04-01 00:00:00
abstract::As known, anomalous resisto-acoustic effect is a fundamental property for weakly inhomogeneous piezoactive waves (Bleustein-Gulyaev, Love, and some leaky waves). It consists in that the velocity of aforementioned waves first increases, achieves its maximum, and only then decreases with increasing conductance of a laye...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.01.007
更新日期:2015-05-01 00:00:00
abstract::Ultrasonic reflection and transmission measurements on saturated, plane-parallel, poroelastic slabs are presented. A data processing technique is proposed to obtain poroelastic parameters from transmission measurements. A special experimental data acquisition and processing technique is applied to minimize the finite ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.10.006
更新日期:2009-03-01 00:00:00
abstract::In practical cardiology, a stethoscope based auscultation has been used to reveal the patient's clinical status. Recently, several hand-held echo devices are going on market and they are expected to play a role as "visible" auscultation instead of stethoscope. We have developed a portable and inexpensive echo device w...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2003.11.009
更新日期:2004-04-01 00:00:00
abstract::The objective of this paper is to develop a nondestructive method for estimating the fracture toughness (K(IC)) of CrMoV steels used as the rotor material of steam turbines in power plants. To achieve this objective, a number of CrMoV steel samples were heat-treated, and the fracture appearance transition temperature ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(03)00154-9
更新日期:2003-09-01 00:00:00
abstract::Predominant physical phenomenon in highly scattering materials is the attenuation due to dispersion. Therefore, received echo has high frequencies more severely attenuated than low frequencies and the structural noise can be modeled as a non-stationary random process. Most of the proposed techniques for enhancing the ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.174
更新日期:2006-12-22 00:00:00
abstract::Lactic acid, psychrophilic, and mesophilic bacteria, Escherichia coli, Salmonella spp. and Staphylococcus aureus were enumerated on chicken breasts after treatment with different high intensity ultrasound (frequency 40 kHz, intensity 9.6 W/cm-2) application times (0, 30, and 50 min) and packaging atmospheres (aerobic ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2018.01.001
更新日期:2020-03-01 00:00:00
abstract::We experimentally demonstrate a very large ultrasonic band gap in a one-dimensional phononic crystal. The structure consists of periodic tungsten pillars fixed to a tailored silicon strip with a layer of epoxy. Combining local resonances and Bragg scattering, the gap ranges from 450kHz to 1250kHz, which corresponds to...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.03.003
更新日期:2017-07-01 00:00:00
abstract::As biotechnology develops, techniques for manipulating and separating small particles such as cells and DNA are required in the life sciences. This paper investigates on-chip manipulation of microparticles in small channels by using ultrasonic vibration. The chip consists of a rectangular glass substrate with a cross-...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.11.026
更新日期:2017-08-01 00:00:00
abstract::A cylindrical standing wave ultrasonic motor using bending vibration transducer was proposed in this paper. The proposed stator contains a cylinder and a bending vibration transducer. The two combining sites between the cylinder and the transducer locate at the adjacent wave loops of bending vibration of the transduce...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2010.12.007
更新日期:2011-07-01 00:00:00
abstract::Today, sophisticated instruments and algorithms used for process control allow the efficient production of substances with the quality guaranteed to the customer. However, production and management techniques are changing. This article aims to analyze trends resulting from those changes from the point of view of ultra...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.047
更新日期:2006-12-22 00:00:00
abstract::An ultrasonic method of acoustic parameter evaluation for porous materials saturated by air (or any other gas) is discussed. The method is based on the evolution of speed of sound and the attenuation inside the material when the static pressure of the gas saturating the material is changed. Asymptotic development of t...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(00)00062-7
更新日期:2001-04-01 00:00:00
abstract::The propagation of ultrasound through an austenitic weld is investigated experimentally as well as in a numerical simulation. The weld is insonified at normal incidence to the fusion line with a longitudinal contact transducer. In order to experimentally trace the ultrasound through the weld, slices of different thick...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(99)00103-1
更新日期:2000-03-01 00:00:00
abstract::Essential to (cardiac) 3D ultrasound are 2D matrix array transducer technology and the associated (two-stage) beam forming. Given the large number of degrees of freedom and the complexity of this problem, simulation tools play an important role. Hereto, the impulse response (IR) method is commonly used. Unfortunately,...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.12.014
更新日期:2014-04-01 00:00:00
abstract::Machining temperature is a key factor in ultrasonic vibration-assisted milling as it can significantly influence tool wear rate and residual thermal stresses. In current study, a physics-based analytical predictive model on machining temperature in ultrasonic vibration-assisted milling is proposed, without resorting t...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106212
更新日期:2020-12-01 00:00:00
abstract::The results of computer simulation taking into account the linear and nonlinear material constants have been presented. Study of the influence of external uniaxial mechanical stress on the dispersive characteristics of elastic waves in piezoelectric structures as "La3Ga5SiO14/fused silica" has been executed. The compa...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2014.07.007
更新日期:2015-01-01 00:00:00
abstract::A technique using pulsed High Intensity Focused Ultrasound (HIFU) to destroy deep-seated solid tumors is a promising noninvasive therapeutic approach. A main purpose of this study was to design and test a HIFU transducer suitable for preclinical studies of efficacy of tested, anti-cancer drugs, activated by HIFU beams...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.12.008
更新日期:2017-04-01 00:00:00
abstract::A method for fabricating disposable membrane hydrophones is presented. The disposable hydrophones are intended for onetime use in such damaging environments as chemically contaminating fluids and high-amplitude (peak amplitude ∼100MPa) shock wave fields, where the use of commercial membrane hydrophones is not recommen...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.05.016
更新日期:2017-11-01 00:00:00
abstract::An improved method for ultrasonic location of multiple flaws using perpendicular ultrasonic arrays, working in near-field conditions, is presented. The method uses the pulse-echo technique and is based on the processing of the information acquired by both the elemental emitting transducers and their adjacent ones. Thi...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.107
更新日期:2006-12-22 00:00:00
abstract::The digital ultrasonic fixed path interferometer designed for testing small amounts of sample was used for the investigation of whole blood coagulation, retraction and clot melting processes. The ultrasound velocity and absorption are determined from the characteristics of an acoustic resonator consisting of an emitte...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/0041-624x(78)90007-0
更新日期:1978-01-01 00:00:00
abstract::Ultrasonic cutting is widely used in food processing applications to produce a clean and accurate cut. However, it is yet to be adopted as an instrument of choice in orthopaedic applications, mainly due to the high temperatures that can be generated at the cut site and the consequent requirement to use additional cool...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.06.046
更新日期:2006-12-22 00:00:00
abstract::High-frequency calibration of hydrophones is becoming increasingly important, both for clinical and scientific applications of ultrasound, and user safety. At present, the calibrations available routinely to the user community extend to 60 MHz. However, hydrophones that can measure beyond this are available, and ultra...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106218
更新日期:2020-12-01 00:00:00
abstract::A mathematical model is developed and presented to capture the effect of viscoelastic nature of a material on modulated ultrasound (US) pulses. The model is established by considering perturbation of material elements subject to modulated US pulses and by introducing the exponential relaxation of the perturbed fluid e...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2014.05.014
更新日期:2014-09-01 00:00:00
abstract::In cancellous bone, longitudinal waves often separate into fast and slow waves depending on the alignment of bone trabeculae in the propagation path. This interesting phenomenon becomes an effective tool for the diagnosis of osteoporosis because wave propagation behavior depends on the bone structure. Since the fast w...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.04.011
更新日期:2008-11-01 00:00:00
abstract::The objective of this study was to examine the potential of ultrasonic velocity as a rapid and nondestructive method to predict the dimensional stability of oak (Quercus petraea (Mattuschka) Lieblein) and chestnut (Castanea sativa Mill.) that are commonly used in flooring industry. Ultrasonic velocity, specific gravit...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.11.007
更新日期:2016-03-01 00:00:00
abstract::The properties of optical to acoustic transduction of semiconductor superlattices have been explored for several years in the sub terahertz frequency range. Using femtosecond laser pulses focused on these structures, acoustic modes are excited with a frequency related to the periodicity of the structure stacking. We h...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2014.07.009
更新日期:2015-02-01 00:00:00
abstract::We analyze experimentally and theoretically the sound propagation velocity of P-waves in granular media made of micrometer-size magnetite particles under an external magnetic field. The sound velocity is measured in a coherent (long-wavelength) regime of propagation after a controlled sample preparation consisting of ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.07.021
更新日期:2018-01-01 00:00:00