Abstract：
:The objective of this study was to examine the potential of ultrasonic velocity as a rapid and nondestructive method to predict the dimensional stability of oak (Quercus petraea (Mattuschka) Lieblein) and chestnut (Castanea sativa Mill.) that are commonly used in flooring industry. Ultrasonic velocity, specific gravity, and radial, tangential and volumetric shrinkages were measured on seventy-four 20×20×30-mm(3) specimens obtained from freshly cut oak and chestnut stems. The ultrasonic velocities of the specimens decreased with increasing moisture content (MC). We found that specific gravity was not a good predictor of the transverse shrinkages as indicated by relatively weak correlations. Ultrasonic velocity, on the other hand, was found to be a significant predictor of the transverse shrinkages for both oak and chestnut. The best results for prediction of shrinkages of oak and chestnut were obtained when the ultrasonic velocity and specific gravity were used together. The multiple regression models we developed in this study explained 77% of volumetric shrinkages in oak and 72% of volumetric shrinkages in chestnut. It is concluded that ultrasonic velocity coupled with specific gravity can be employed as predicting parameters to evaluate the dimensional stability of oak and chestnut wood during manufacturing process.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Dündar T,Wang X,As N,Avcı Edoi
10.1016/j.ultras.2015.11.007subject
Has Abstractpub_date
2016-03-01 00:00:00pages
86-90eissn
0041-624Xissn
1874-9968pii
S0041-624X(15)00300-5journal_volume
66pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract：:Investigation was carried out to study the effects of maximum aggregate size (MAS) (12.5mm, 19.0mm, 25.0mm, 37.5mm, and 50.0mm) on ultrasonic pulse velocity (UPV) of concrete. For investigation, first class bricks were collected and broken to make coarse aggregate. The aggregates were tested for specific gravity, abso...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.04.006
更新日期：2016-07-01 00:00:00
abstract：:Both pinnae of anaesthetized male guinea-pigs were contused in a reproducible manner and one immediately treated with 0.75 MHz ultrasound at an average therapeutic intensity of 0.61 W cm-2 for a period of 2 min. The lividity and rate of resorption of the rusultant bruises were measured by a photometric method. The res...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/0041-624x(78)90021-5
更新日期：1978-09-01 00:00:00
abstract：:A numerical study is carried out of the surface acoustic wave generation by a bulk acoustic wave in a half-infinite anisotropic half-space without piezoeffect. The efficient conversion of bulk waves into surface waves occurs due to a grating area created on the surface of the substrate. Our simulations are fully based...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.01.007
更新日期：2013-07-01 00:00:00
abstract：:This study investigated the effect of LIPUS on fracture healing when fractures were exposed to ultrasound at three axial distances: z=0 mm, 60 mm, and 130 mm. We applied LIPUS to rat fracture at these three axial distances mimicking the exposure condition of human fractures at different depths under the soft tissue. M...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.10.013
更新日期：2014-03-01 00:00:00
abstract：:In medical ultrasound imaging, dynamic range (DR) is defined as the difference between the maximum and minimum values of the displayed signal to display and it is one of the most essential parameters that determine its image quality. Typically, DR is given with a fixed value and adjusted manually by operators, which l...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.09.012
更新日期：2015-02-01 00:00:00
abstract：:An influence of ultrasonic treatment (drawing) on structure, high temperature durability, evaporation and creep behaviours of tungsten single crystal and wires were investigated. A relation of tungsten wires properties with dislocation distribution was determined. ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.02.002
更新日期：2004-04-01 00:00:00
abstract：:The objective was to use multiple paths through the slurry to determine the lowest concentration that provided accurate attenuation measurements and to measure the velocity of sound through an effective long path. Ultrasonic attenuation measurements were obtained for slurries of silica (10 microm diameter) in water fo...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.05.024
更新日期：2006-12-22 00:00:00
abstract：:Skeletal muscle is an important secretory organ in mammals, producing myriad chemical mediators ("myokines") with distinct biological action in different tissues, including anti-inflammatory activity. Extracellular vesicles (EVs) have recently been identified as a mode of myokine transport from muscle, facilitating su...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2020.106243
更新日期：2021-02-01 00:00:00
abstract：:Surface wave motions generated by a time-harmonic point load applied at the surface of an isotropic linearly elastic half-space are conventionally solved by the use of integral transform techniques. The inverse transforms, are often complicated and will not always yield closed-form solutions. In this paper expressions...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.05.003
更新日期：2014-09-01 00:00:00
abstract：:The wave propagation of an infinite functionally graded plate in thermal environments is studied using the higher-order shear deformation plate theory. The thermal effects and temperature-dependent material properties are both taken into account. The temperature field considered is assumed to be a uniform distribution...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2011.05.009
更新日期：2011-12-01 00:00:00
abstract：:The results of computer simulation taking into account the linear and nonlinear material constants have been presented. Study of the influence of external uniaxial mechanical stress on the dispersive characteristics of elastic waves in piezoelectric structures as "La3Ga5SiO14/fused silica" has been executed. The compa...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.07.007
更新日期：2015-01-01 00:00:00
abstract：:The Lamb waves are used for the ultrasonic characterization of welds because of their relative long-range propagation. In this paper, a simplified model of a weld-strip between two identical semi-infinite elastic layers is investigated. The reflected and transmitted ultrasonic fields are expressed by modal series whos...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.11.004
更新日期：2005-06-01 00:00:00
abstract：:It has been established that structural changes in a ferrofluid (formation of clusters) upon the effect of an external magnetic field can be effectively studied by ultrasound spectroscopy. In particular, the resonance absorption of ultrasonic waves enables detection and determination of the size of spherical clusters....
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(02)00117-8
更新日期：2002-05-01 00:00:00
abstract：:This article proposes to estimate slow blood flow with high frequency ultrasound imaging. The proposed technique combines 2 methods. First, a statistical method, called Speckle Flow Imaging (SFI) based on the analysis of changes in the speckle pattern along time, gives an index directly related to the total velocity v...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.06.025
更新日期：2006-12-22 00:00:00
abstract：:A circular cylindrical piezoelectric transducer with radial polarization is proposed. The axial vibration characteristics of the transducer are studied by three different methods: analytical calculation, FEM simulation and experiment. The symmetric and asymmetric excitation conditions are discussed in the Haskins and ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2009.09.008
更新日期：2010-03-01 00:00:00
abstract：:The results of experimental and theoretical studies of nonlinear acoustic phenomena (amplitude-dependent losses, resonant frequency shifts, damping of weak ultrasonic pulses and their carrier frequency phase delay under action of a powerful low-frequency pumping wave as well as amplitude-phase self-action of the finit...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.07.008
更新日期：2014-02-01 00:00:00
abstract：:Ultrasonics is an important diagnostic tool for bone diseases, as it allows for non-invasive assessment of bone tissue quality through mass density-elasticity relationships. The latter are, however, quite complex for fluid-filled porous media, which motivates us to develop a rigorous multiscale poromicrodynamics appro...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.12.005
更新日期：2014-07-01 00:00:00
abstract：:The layer-multiple-scattering method is developed to study wave propagation through two-dimensional lattices of cylindrical inclusions in an elastic medium. The lattices are a series of periodically spaced infinite one-dimensional periodic gratings (or rows) of inclusions. The layer-multiple-scattering method allows t...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.09.002
更新日期：2006-12-01 00:00:00
abstract：:Elasticity assessment based on bulk wave velocity (BWV) measurements is the most popular technique to characterize the anisotropic stiffness tensor in cortical bone. Typically, a cuboid bone specimen is cut with its sides along the different anatomical directions. Then, the velocity of shear and longitudinal waves pro...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.05.009
更新日期：2017-09-01 00:00:00
abstract：:In spite of many advances in analytical and numerical modeling techniques for solving different engineering problems, an efficient solution technique for wave propagation modeling of an electromagnetic acoustic transducer (EMAT) system is still missing. Distributed point source method (DPSM) is a newly developed semi-...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2009.12.003
更新日期：2010-05-01 00:00:00
abstract：:This paper describes a laser optical technique for the detection of in-plane (IP) motion of ultrasonic waves propagating in solids. This interference-based laser optical technique includes a tiny square indentation with a width of about 30 microm on the sample surface and a relatively simple optical arrangement. The c...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.05.076
更新日期：2006-12-22 00:00:00
abstract：:This paper describes an optimization method of the top electrode size for a thin film matrix ultrasonic transducer (M-UT) in the frequency range above 200 MHz. The goal of this work is to design an optimal top electrode size for an M-UT providing the maximal output peak-peak voltage (V(PP)) and the maximal signal-to-n...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2012.10.018
更新日期：2013-03-01 00:00:00
abstract：:Filamentous fungi are used in several industries and in academia to produce antibiotics, metabolites, proteins and pharmaceutical compounds. The development of valuable strains usually requires the insertion of recombinant deoxyribonucleic acid; however, the protocols to transfer DNA to fungal cells are highly ineffic...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.03.003
更新日期：2014-08-01 00:00:00
abstract：:This article describes the use of the frequency domain finite element (FDFE) technique for guided wave mode selection in inhomogeneous waveguides. Problems with Rayleigh-Lamb and Shear-Horizontal mode excitation in isotropic homogeneous plates are first studied to demonstrate the application of the approach. Then, two...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2015.12.007
更新日期：2016-04-01 00:00:00
abstract：:A method for fabricating disposable membrane hydrophones is presented. The disposable hydrophones are intended for onetime use in such damaging environments as chemically contaminating fluids and high-amplitude (peak amplitude ∼100MPa) shock wave fields, where the use of commercial membrane hydrophones is not recommen...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.05.016
更新日期：2017-11-01 00:00:00
abstract：:Chemical mechanical polishing (CMP) is the primary method to realize the global planarization of silicon wafer. In order to improve this process, a novel method which combined megasonic vibration to assist chemical mechanical polishing (MA-CMP) is developed in this paper. A matching layer structure of polishing head w...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.04.005
更新日期：2017-09-01 00:00:00
abstract：:Knowing the low-frequency response of hydrophones, down to 100 kHz at least, is important for accurate biomedical ultrasound measurements. However, current international standards do not extend below 500 kHz. Furthermore, commercial hydrophone sources typically do not supply sensitivity data below 1-2 MHz. Therefore, ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2003.12.008
更新日期：2004-04-01 00:00:00
abstract：:The purpose of this study is to explore the feasibility of time-dependent acoustic impedance measurement by Scanning Acoustic Microscopy (SAM) for analyzing the sodium diffusion. The purpose is motivated by the fact that sodium monitoring is challenging and still in the area of exploratory analysis despite its biologi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2018.12.013
更新日期：2019-04-01 00:00:00
abstract：:This will be a discussion of the non-invasive determination of the viscosity of a non-Newtonian fluid in laminar pipe flow over the range of shear rates present in the pipe. The procedure used requires knowledge of the flow profile in and the pressure drop along a long straight run of pipe. The profile is determined b...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.05.027
更新日期：2006-12-22 00:00:00
abstract：:Although ultrasonic energy is widely used cleaning and degreasing of parts and assemblies in automotive and other industries, the use of ultrasonic energy in an industrial scale for textile washing is very new. This is due to the complexity of controlling the combination of chemical and mechanical effects, whereas wit...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.02.005
更新日期：2004-04-01 00:00:00
