Abstract:
:A circular cylindrical piezoelectric transducer with radial polarization is proposed. The axial vibration characteristics of the transducer are studied by three different methods: analytical calculation, FEM simulation and experiment. The symmetric and asymmetric excitation conditions are discussed in the Haskins and Walsh model. For the resonance frequencies of the transducer, the results from the above three methods coincide well with each other. For the vibration amplitude, there are some deviations between the FEM simulation and measurement results; some possible reasons for this are discussed. The influence of the electrode patterns on the excitation modes are also investigated in detail. Based on the study described in this paper, the research methodology for a cylindrical piezoelectric transducer is clarified.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Sun D,Wang S,Hata S,Shimokohbe Adoi
10.1016/j.ultras.2009.09.008subject
Has Abstractpub_date
2010-03-01 00:00:00pages
403-10issue
3eissn
0041-624Xissn
1874-9968pii
S0041-624X(09)00109-7journal_volume
50pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract::Ultrasonic reflection and transmission measurements on saturated, plane-parallel, poroelastic slabs are presented. A data processing technique is proposed to obtain poroelastic parameters from transmission measurements. A special experimental data acquisition and processing technique is applied to minimize the finite ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.10.006
更新日期:2009-03-01 00:00:00
abstract::A method for fabricating disposable membrane hydrophones is presented. The disposable hydrophones are intended for onetime use in such damaging environments as chemically contaminating fluids and high-amplitude (peak amplitude ∼100MPa) shock wave fields, where the use of commercial membrane hydrophones is not recommen...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.05.016
更新日期:2017-11-01 00:00:00
abstract::The results of computer simulation taking into account the linear and nonlinear material constants have been presented. Study of the influence of external uniaxial mechanical stress on the dispersive characteristics of elastic waves in piezoelectric structures as "La3Ga5SiO14/fused silica" has been executed. The compa...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2014.07.007
更新日期:2015-01-01 00:00:00
abstract::Sonic crystals are artificial structures consisting of a periodic array of acoustic scatterers embedded in a homogeneous matrix material, with a usually large impedance mismatch between the two materials. They exhibit strong sound attenuation at selective frequency bands due to the interference of multiply reflected w...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.01.014
更新日期:2004-04-01 00:00:00
abstract::This will be a discussion of the non-invasive determination of the viscosity of a non-Newtonian fluid in laminar pipe flow over the range of shear rates present in the pipe. The procedure used requires knowledge of the flow profile in and the pressure drop along a long straight run of pipe. The profile is determined b...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.027
更新日期:2006-12-22 00:00:00
abstract::In this study, we found that microbubbles with diameters of less than 100μm can be easily generated by using a hollow cylindrical ultrasonic horn. Consecutive images of bubbles obtained by using high-speed and high-resolution cameras reveal that a capillary wave is formed on the gas-liquid interface under weak ultraso...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2012.05.010
更新日期:2013-01-01 00:00:00
abstract::Ultrasound (US) has been used in IMS II (intravascular US) and CLOTBUST (transcranial US) clinical trials for thrombolysis. During the treatment, in addition to the targeted thrombus, other biological components, such as blood and vessel walls are subjected to long durations of US exposure. In this study we explored e...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.10.004
更新日期:2007-03-01 00:00:00
abstract::In the food industry, ultrasonic cutting is used to improve separation by a reduction of the cutting force. This reduction can be attributed to the modification of tool-workpiece interactions at the cutting edge and along the tool flanks because of the superposition of the cutting movement with ultrasonic vibration of...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.03.001
更新日期:2009-06-01 00:00:00
abstract::This paper establishes a model evaluating the signal loss of double transmitted acoustic beams through random rough liquid-solid surfaces based on Fresnel approximation and the phase-screen approximation. The numerical solution is replaced with a simple analytical solution through using the exponential substitution ap...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2010.05.007
更新日期:2011-01-01 00:00:00
abstract::This investigation deals with various new aspects of the sensitivity improvement of a pump-probe laser based acoustic method. A short laser pulse is used to excite a mechanical pulse thermo-elastically. Echoes of these mechanical pulses reaching the surface are causing a slight change of the optical reflectivity. The ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(02)00207-x
更新日期:2002-05-01 00:00:00
abstract::An ultrasonic probe consisting of two optical fiber-based miniaturized transducers for wideband ultrasound emission and detection is employed for the characterization of in vitro biological tissues. In the probe, ultrasound generation is obtained by thermoelastic emission from patterned carbon films in Micro-Opto-Mech...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.11.024
更新日期:2017-03-01 00:00:00
abstract::The natural frequencies and distributions of displacement components for the surface vibrational modes in thin isotropic elastic disks are calculated. In particular, the research is focused on even solutions for low-lying resonant vibrations with large angular wave numbers. Several families of modes are found which ar...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.11.002
更新日期:2014-03-01 00:00:00
abstract::Several aspects of spectral analysis of bubble transients in Doppler ultrasonic decompression data are discussed. The computation of energy density spectra, using fast Fourier transform techniques for analyzing bubble transients, is described. Spectral analysis of data from probes implanted within animals, using a con...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/0041-624x(77)90026-9
更新日期:1977-05-01 00:00:00
abstract::Elasticity assessment based on bulk wave velocity (BWV) measurements is the most popular technique to characterize the anisotropic stiffness tensor in cortical bone. Typically, a cuboid bone specimen is cut with its sides along the different anatomical directions. Then, the velocity of shear and longitudinal waves pro...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.05.009
更新日期:2017-09-01 00:00:00
abstract::The objective was to use multiple paths through the slurry to determine the lowest concentration that provided accurate attenuation measurements and to measure the velocity of sound through an effective long path. Ultrasonic attenuation measurements were obtained for slurries of silica (10 microm diameter) in water fo...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.024
更新日期:2006-12-22 00:00:00
abstract::In ultrasonic non-destructive testing of materials with a coarse-grained structure the scattering from the grains causes backscattering noise, which masks flaw echoes in the measured signal. Several filtering methods have been proposed for improving the signal-to-noise ratio. In this paper we present a comparative stu...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.05.010
更新日期:2009-12-01 00:00:00
abstract::In acoustic and ultrasonic non-destructive testing techniques, it is sometimes beneficial to concentrate sound energy at a chosen location in space and at a specific instance in time, for example to improve the signal-to-noise ratio or activate the nonlinearity of damage features. Time Reversal (TR) techniques, taking...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.01.010
更新日期:2016-04-01 00:00:00
abstract::A numerical study is carried out of the surface acoustic wave generation by a bulk acoustic wave in a half-infinite anisotropic half-space without piezoeffect. The efficient conversion of bulk waves into surface waves occurs due to a grating area created on the surface of the substrate. Our simulations are fully based...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.01.007
更新日期:2013-07-01 00:00:00
abstract::We derive a simple expression, which gives an approximate value of the Rayleigh wave velocity in an isotropic solid. This approximation is five times better than that given by Viktorov. The velocity equation can be easily inverted in order to obtain an accurate determination of the elastic constants. This procedure ca...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.09.006
更新日期:2007-03-01 00:00:00
abstract::Ultrasonic vibration cutting is an efficient cutting process for mechanical micro-machining. This process can generate intricate surface textures with different geometric characteristics. Micro-grooves/micro-channels are among the most frequently encountered micro-structures and, as such, are the focus of this paper. ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.12.016
更新日期:2016-04-01 00:00:00
abstract::The Lamb waves are used for the ultrasonic characterization of welds because of their relative long-range propagation. In this paper, a simplified model of a weld-strip between two identical semi-infinite elastic layers is investigated. The reflected and transmitted ultrasonic fields are expressed by modal series whos...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.11.004
更新日期:2005-06-01 00:00:00
abstract::This paper describes an optimization method of the top electrode size for a thin film matrix ultrasonic transducer (M-UT) in the frequency range above 200 MHz. The goal of this work is to design an optimal top electrode size for an M-UT providing the maximal output peak-peak voltage (V(PP)) and the maximal signal-to-n...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2012.10.018
更新日期:2013-03-01 00:00:00
abstract::In this paper, an experimental study of the effect of the resonator shape on the performance of a traveling-wave thermoacoustic engine is presented. Two different resonators were tested in the thermoacoustic-Stirling heat. One resonator is an iso-diameter one, and the other is a tapered one. To have a reasonable compa...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.08.008
更新日期:2006-12-22 00:00:00
abstract::The main component of every device used for investigating internal object structure by Ultrasound Transmission Tomography (UTT) is a special ultrasonic probe. This paper presents the structure of model multielement ring probe for examining objects using this method in divergent ray projection geometry. The probe is ma...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.126
更新日期:2006-12-22 00:00:00
abstract::The purpose of this study is to gain the knowledge and experience in the design of thin-disk piezoceramic-driving ultrasonic actuator dedicated. In this paper, the design and construction of an innovative ultrasonic actuator is developed as a stator, which is a composite structure consisting of piezoceramic (PZT) memb...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(03)00128-8
更新日期:2003-08-01 00:00:00
abstract::For coupled structures surrounded by heavy fluids, it is difficult to obtain dispersion curves from an eigenvalue analysis, because the external fluid term in the coupled equation includes transcendental functions for frequency and wavenumber. Thus, in this study, the acoustic mass of the external fluid was approximat...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.12.009
更新日期:2018-04-01 00:00:00
abstract::Periodic composite ultrasonic transducers offer many advantages but the periodic pillar architecture can give rise to unwanted modes of vibration which interfere with the piston like motion of the fundamental thickness mode. In this paper, viscoelastic loss is incorporated into a three-dimensional plane wave expansion...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.03.004
更新日期:2008-12-01 00:00:00
abstract::Images captured during routine clinical transcranial sonography (TCS) examination are of a low resolution, so can be confusing for diagnostic evaluations. Manual segmentation of brain structures (areas of the midbrain and substantia nigra (SN)) that are of special interest cause inter-observer and intra-observer varia...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2012.04.005
更新日期:2013-01-01 00:00:00
abstract::We study thickness-shear vibration of a quartz plate connected to two piezoelectric ceramic plates with initial deformations caused by a biasing electric field. The theory for small deformations superposed on finite biasing deformations in an electroelastic body is used. It is shown that the resonant frequencies of th...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2010.07.002
更新日期:2011-02-01 00:00:00
abstract::A mathematical model is developed and presented to capture the effect of viscoelastic nature of a material on modulated ultrasound (US) pulses. The model is established by considering perturbation of material elements subject to modulated US pulses and by introducing the exponential relaxation of the perturbed fluid e...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2014.05.014
更新日期:2014-09-01 00:00:00