Abstract:
:The purpose of this research was to develop, implement and verify a measurement technique enabling rapid and dependable characterization of ultrasound hydrophone probes beyond 20 MHz. The technique employs focused acoustic sources to optimize signal-to-noise ratio and spatial averaging correction model to account for the finite aperture of the hydrophone probes. To minimize calibration time, substitution technique was chosen and its applicability was tested up to 60 MHz. The overall uncertainty of the measurements was on the order of +/- 1 dB. The results are presented for both needle and membrane type PVDF hydrophones having effective diameters ranging from 130-1200 microns. The fundamental limitations of the technique were determined and it is shown that the spatial averaging error is governed by the cross-section of the beam in the focal plane and the ratio of the effective diameters of the reference and tested hydrophone probes. The technique developed is being extended to frequencies beyond 60 MHz.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Radulescu EG,Lewin PA,Nowicki Adoi
10.1016/s0041-624x(02)00166-xsubject
Has Abstractpub_date
2002-05-01 00:00:00pages
497-501issue
1-8eissn
0041-624Xissn
1874-9968pii
S0041-624X(02)00166-Xjournal_volume
40pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract::We analyze experimentally and theoretically the sound propagation velocity of P-waves in granular media made of micrometer-size magnetite particles under an external magnetic field. The sound velocity is measured in a coherent (long-wavelength) regime of propagation after a controlled sample preparation consisting of ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.07.021
更新日期:2018-01-01 00:00:00
abstract::This paper establishes a model evaluating the signal loss of double transmitted acoustic beams through random rough liquid-solid surfaces based on Fresnel approximation and the phase-screen approximation. The numerical solution is replaced with a simple analytical solution through using the exponential substitution ap...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2010.05.007
更新日期:2011-01-01 00:00:00
abstract::A new type of optical fiber hydrophone is constructed with a fiber Bragg grating (FBG) based on the intensity modulation of laser light in an FBG under the influence of sound pressure. The FBG hydrophone shows linearity, with dynamic range about 70 dB. It can measure amplitude and phase of an acoustic field in real ti...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(99)00105-5
更新日期:2000-03-01 00:00:00
abstract::This paper presents a study on the wave surfaces of anisotropic solids. In addition to the classical and real rays, which are defined by the normal to the slowness surfaces, it is obtained complex rays, which are associated to specific inhomogeneous plane waves. Referring to the complex Christoffel's equation and to t...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(02)00109-9
更新日期:2002-05-01 00:00:00
abstract::Ultrasonic modes guided along the surface of a concrete block covered by a composite plate are investigated. First of all, the propagation phenomenon is studied by predicting the dispersion curves for various modes supposed to exist in this structure. Then, focus is made on a specific mode expected to be sensitive to ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.01.074
更新日期:2004-04-01 00:00:00
abstract::Ultrasonic techniques have been used to measure the elastic properties of bone. Eight human tibiae were used to determine and map the elastic properties of cortical and cancellous bone. The present study shows cortical bone to be at least orthotropic in its material symmetry. The mechanical properties of cortical bone...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(96)00078-9
更新日期:1996-12-01 00:00:00
abstract::The study is aimed to perform dynamic modeling of a part feeder powered by piezoelectric actuation. This part feeder consists mainly of a horizontal platform vibrated by a pair of parallel piezoelectric bimorph beams. Owing to intermittent impacts with the platform, the transported part on the platform is able to marc...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2007.02.002
更新日期:2007-06-01 00:00:00
abstract::The dispersion and attenuation features of the multi-physical fields coupled waves propagating in an infinite piezoelectric semiconductor and the reflection problem at a boundary which is mechanically free, electrically insulation and the dielectrically open circuit are studied in this paper. Different from the classi...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2018.09.009
更新日期:2019-02-01 00:00:00
abstract::This paper presents a method which combines electromagnetic simulation and ultrasonic simulation to build EMAT array models. For a specific sensor configuration, Lorentz forces are calculated using the finite element method (FEM), which then can feed through to ultrasonic simulations. The propagation of ultrasound wav...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.10.020
更新日期:2016-03-01 00:00:00
abstract::3D ultrasound is a promising imaging modality for clinical diagnosis and treatment monitoring. Its cost is relatively low in comparison with CT and MRI, no intensive training and radiation protection is required for its operation, and its hardware is movable and can potentially be portable. In this study, we developed...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.05.003
更新日期:2005-01-01 00:00:00
abstract::In this paper, the resonance frequency equation and expression of displacement amplitude magnifications of a full-wave barber ultrasonic horn are obtained. By discussing the relationships between the displacement amplitude magnifications and the geometrical dimensions, the optimized design of the horn for the largest ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2011.12.006
更新日期:2012-07-01 00:00:00
abstract::In spite of many advances in analytical and numerical modeling techniques for solving different engineering problems, an efficient solution technique for wave propagation modeling of an electromagnetic acoustic transducer (EMAT) system is still missing. Distributed point source method (DPSM) is a newly developed semi-...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.12.003
更新日期:2010-05-01 00:00:00
abstract::A method for measuring the mechanical quality factor (Q factor) of materials in large-amplitude flexural vibrations was devised on the basis of the original definition of the Q factor. The Q factor, the ratio of the reactive energy to the dissipated energy, was calculated from the vibration velocity distribution. The ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.03.012
更新日期:2016-07-01 00:00:00
abstract::Non-linear acoustic oscillations of gas bubbles immersed in viscoelastic fluids are theoretically studied. The problem is formulated by considering a constitutive equation of differential type with an interpolated time derivative. With the aid of this rheological model, fluid elasticity, shear thinning viscosity and e...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2005.03.010
更新日期:2005-08-01 00:00:00
abstract::A nonlinear ultrasonic method is proposed based on a group of newly discovered wave triplets where two primary codirectional shear-horizontal SH0 waves mix in a weakly nonlinear plate and generate a cumulative S0 Lamb wave at the sum frequency. Theoretical analyses show that any combination of two primary SH0 waves wh...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2019.04.001
更新日期:2019-07-01 00:00:00
abstract::In the food industry, ultrasonic cutting is used to improve separation by a reduction of the cutting force. This reduction can be attributed to the modification of tool-workpiece interactions at the cutting edge and along the tool flanks because of the superposition of the cutting movement with ultrasonic vibration of...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.03.001
更新日期:2009-06-01 00:00:00
abstract::The goal standard of contrast echocardiography is the absolute measure of myocardial perfusion using a contrast agent. Actually, several contrast agents are developed. All these agents show left ventricular opacification after intravenous injection. However, none of these agents shows an acceptable enhancement of the ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(97)00137-6
更新日期:1998-02-01 00:00:00
abstract::Elastography is an imaging technique based on strain estimation in soft tissues under quasi-static compression. The stress is usually created by a compression plate, and the target is imaged by an ultrasonic linear array. This configuration is used for breast elastography, and has been investigated both theoretically ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(02)00228-7
更新日期:2002-05-01 00:00:00
abstract::In this paper, the development of modified beamforming methods, Filtered Delay Weight Multiply and Sum (F-DwMAS) and Filtered Delay Euclidian-Weighted Multiply and Sum (F-DewMAS), are reported. These methods were investigated on a minimum-redundancy synthetic aperture technique, called as 2 element Receive Synthetic A...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106293
更新日期:2021-02-01 00:00:00
abstract::Intraluminal (within the alimentary tract) thermal surgery has been shown to be a useful therapeutic option when extracorporeal focused ultrasound applicators cannot be used since their beam may not reach the target site. If plane transducers are used for the treatment of alimentary tract tumours, the applicator must ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.01.088
更新日期:2004-04-01 00:00:00
abstract::Human umbilical cords were exposed to high amplitude focussed ultrasonic pulses with focal energy densities 0.6 and 0.4 mJ mm-2. The endothelium of the exposed vessel (vein) was examined by means of confocal laser scanning microscopy and scanning electron microscopy. The degree of tissue change ranged from the inducti...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/0041-624x(94)90111-2
更新日期:1994-09-01 00:00:00
abstract::The accurate estimation of time of flight (TOF) of an ultrasonic signal is essential in ultrasonic non-destructive testing (NDT). A novel method for TOF estimation based on the short-time Fourier transform (STFT) is proposed in this paper. Firstly, the time and frequency components of ultrasonic echoes are represented...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106104
更新日期:2020-04-01 00:00:00
abstract::Theoretical formulation for the problem of second harmonic guided waves in pipes is presented from the principles of continuum mechanics. The formulation is carried out in the reference configuration of the pipe with an emphasis on the correct use of the "Divergence" operator in the reference configuration. Second har...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2012.12.007
更新日期:2013-04-01 00:00:00
abstract::In linear-array photoacoustic imaging (PAI), beamforming methods can be used to reconstruct the images. Delay-and-sum (DAS) beamformer is extensively used due to its simple implementation. However, this algorithm results in high level of sidelobes and low resolution. In this paper, it is proposed to form the photoacou...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2019.03.010
更新日期:2019-07-01 00:00:00
abstract::A torsional piezoelectric ultrasonic sensor design is proposed in this paper and computationally tested and optimized to measure shear stiffness properties of soft tissue. These are correlated with a number of pathologies like tumors, hepatic lesions and others. The reason is that, whereas compressibility is predomina...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2014.05.001
更新日期:2014-09-01 00:00:00
abstract::A mathematical model is developed and presented to capture the effect of viscoelastic nature of a material on modulated ultrasound (US) pulses. The model is established by considering perturbation of material elements subject to modulated US pulses and by introducing the exponential relaxation of the perturbed fluid e...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2014.05.014
更新日期:2014-09-01 00:00:00
abstract::The Lamb waves are used for the ultrasonic characterization of welds because of their relative long-range propagation. In this paper, a simplified model of a weld-strip between two identical semi-infinite elastic layers is investigated. The reflected and transmitted ultrasonic fields are expressed by modal series whos...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.11.004
更新日期:2005-06-01 00:00:00
abstract::In most of industries as aeronautics, aerospace and nuclear, the main part of the ultrasonic testing is carried out directly in touch with the inspected component. Among others, the cooling piping of French pressurized water reactor comprises many welding components with complex geometry: elbows, butt welds, nozzles. ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(02)00145-2
更新日期:2002-05-01 00:00:00
abstract::Ultrasound (US) has been used in IMS II (intravascular US) and CLOTBUST (transcranial US) clinical trials for thrombolysis. During the treatment, in addition to the targeted thrombus, other biological components, such as blood and vessel walls are subjected to long durations of US exposure. In this study we explored e...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.10.004
更新日期:2007-03-01 00:00:00
abstract::Acoustic scattering phenomena from complex immersed elastic shells are studied by high-speed Schlieren visualization for spark-generated spherical quasi-Dirac excitations. The situations considered are air-filled cylindrical shells under normal insonification and air-filled cylindrical shells soldered at one end with ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(99)00165-1
更新日期:2000-03-01 00:00:00