Effect of hydrogel elasticity and ephrinB2-immobilized manner on Runx2 expression of human mesenchymal stem cells.

Abstract:

:The objective of this study is to design the manner of ephrinB2 immobilized onto polyacrylamide (PAAm) hydrogels with varied elasticity and evaluate the effect of hydrogels elasticity and the immobilized manner of ephrinB2 on the Runx2 expression of human mesenchymal stem cells (hMSC). The PAAm hydrogels were prepared by the radical polymerization of acrylamide (AAm), and N,N'-methylenebisacrylamide (BIS). By changing the BIS concentration, the elasticity of PAAm hydrogels changed from 1 to 70kPa. For the bio-specific immobilization of ephrinB2, a chimeric protein of ephrinB2 and Fc domain was immobilized onto protein A-conjugated PAAm hydrogels by making use of the bio-specific interaction between the Fc domain and protein A. When hMSC were cultured on the ephrinB2-immobilized PAAm hydrogels with varied elasticity, the morphology of hMSC was of cuboidal shape on the PAAm hydrogels immobilized with ephrinB2 compared with non-conjugated ones, irrespective of the hydrogels elasticity. The bio-specific immobilization of ephrinB2 enhanced the level of Runx2 expression. The expression level was significantly high for the hydrogels of 3.6 and 5.9kPa elasticity with bio-specific immobilization of ephrinB2 compared with other hydrogels with the same elasticity. The hydrogels showed a significantly down-regulated RhoA activity. It is concluded that the Runx2 expression of hMSC is synergistically influenced by the hydrogels elasticity and their immobilized manner of ephrinB2 immobilized. STATEMENT OF SIGNIFICANCE:Differentiation fate of mesenchymal stem cells (MSC) is modified by biochemical and biophysical factors, such as elasticity and signal proteins. However, there are few experiments about combinations of them. In this study, to evaluate the synergistic effect of them on cell properties of MSC, we established to design the manner of Eph signal ligand, ephrinB2, immobilized onto polyacrylamide hydrogels with varied elasticity. The gene expression level of an osteogenic maker, Runx2, was enhanced by the immobilized manner, and significantly enhanced for the hydrogels of around 4kPa elasticity with bio-specific immobilization of ephrinB2. This is the novel report describing to demonstrate that the Runx2 expression of MSC is synergistically influenced by the hydrogels elasticity and their manner of ephrinB2 immobilized.

journal_name

Acta Biomater

journal_title

Acta biomaterialia

authors

Toda H,Yamamoto M,Uyama H,Tabata Y

doi

10.1016/j.actbio.2017.03.016

subject

Has Abstract

pub_date

2017-08-01 00:00:00

pages

312-322

eissn

1742-7061

issn

1878-7568

pii

S1742-7061(17)30178-2

journal_volume

58

pub_type

杂志文章
  • Fabrication of a nanoparticle-containing 3D porous bone scaffold with proangiogenic and antibacterial properties.

    abstract::3D porous scaffolds based on agarose and nanocrystalline apatite, two structural components that act as a temporary mineralized extracellular matrix, were prepared by the GELPOR3D method. This shaping technology allows the introduction of thermally-labile molecules within the scaffolds during the fabrication procedure...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2019.01.013

    authors: Paris JL,Lafuente-Gómez N,Cabañas MV,Román J,Peña J,Vallet-Regí M

    更新日期:2019-03-01 00:00:00

  • Synthesis of nanocarriers with remote magnetic drug release control and enhanced drug delivery for intracellular targeting of cancer cells.

    abstract::Nanotherapeutic strategy is well recognized as the therapeutic approach of the future. Numerous reports have demonstrated the use of nanoparticulate drug carriers for the development of targeted nanotherapeutics by, for instance, incorporation of a moiety that specifically targets certain diseased cells. However, syst...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2011.03.021

    authors: Tung WL,Hu SH,Liu DM

    更新日期:2011-07-01 00:00:00

  • In vivo inhibition of hypertrophic scars by implantable ginsenoside-Rg3-loaded electrospun fibrous membranes.

    abstract::Clinically, hypertrophic scarring (HS) is a major concern for patients and has been a challenge for surgeons, as there is a lack of treatments that can intervene early in the formation of HS. This study reports on a Chinese drug, 20(R)-ginsenoside Rg3 (GS-Rg3), which can inhibit in vivo the early formation of HS and l...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2013.07.040

    authors: Cheng L,Sun X,Hu C,Jin R,Sun B,Shi Y,Zhang L,Cui W,Zhang Y

    更新日期:2013-12-01 00:00:00

  • Newly developed Sr-substituted alpha-TCP bone cements.

    abstract::New bone cements made of Sr-substituted brushite-forming alpha-tricalcium phosphate (alpha-TCP) were prepared and characterized in the present work. The quantitative phase analysis and structural refinement of the starting powders and of hardened cements were performed by X-ray powder diffraction and the Rietveld refi...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2009.09.001

    authors: Pina S,Torres PM,Goetz-Neunhoeffer F,Neubauer J,Ferreira JM

    更新日期:2010-03-01 00:00:00

  • Unique microstructural design of ceramic scaffolds for bone regeneration under load.

    abstract::During the past two decades, research on ceramic scaffolds for bone regeneration has progressed rapidly; however, currently available porous scaffolds remain unsuitable for load-bearing applications. The key to success is to apply microstructural design strategies to develop ceramic scaffolds with mechanical propertie...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2013.02.039

    authors: Roohani-Esfahani SI,Dunstan CR,Li JJ,Lu Z,Davies B,Pearce S,Field J,Williams R,Zreiqat H

    更新日期:2013-06-01 00:00:00

  • Colloidal carrier integrating biomaterials for oral insulin delivery: Influence of component formulation on physicochemical and biological parameters.

    abstract::Strategies to design effective and safe colloidal carriers for biopharmaceuticals have evolved through applying the knowledge gained in nanotechnology to medicine. Designing a colloidal carrier to serve as a protein delivery device requires an understanding of the effect of different materials on the physicochemical, ...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2009.03.007

    authors: Woitiski CB,Neufeld RJ,Ribeiro AJ,Veiga F

    更新日期:2009-09-01 00:00:00

  • Reduced adhesive ligand density in engineered extracellular matrices induces an epithelial-mesenchymal-like transition.

    abstract:UNLABELLED:A synergistic effect of biochemical and mechanical cues emanating from the extracellular matrix (ECM) on inducing malignant transformation of epithelial cells has been observed recently. However, the effect of quantitative changes in biochemical stimuli on cell phenotype, without changes in ECM component and...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2016.05.006

    authors: Marlar S,Abdellatef SA,Nakanishi J

    更新日期:2016-07-15 00:00:00

  • Predictive biomechanical analysis of ascending aortic aneurysm rupture potential.

    abstract::Aortic aneurysm is a leading cause of death in adults, often taking lives without any premonitory signs or symptoms. Adverse clinical outcomes of aortic aneurysm are preventable by elective surgical repair; however, identifying at-risk individuals is difficult. The objective of this study was to perform a predictive b...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2013.07.044

    authors: Martin C,Sun W,Pham T,Elefteriades J

    更新日期:2013-12-01 00:00:00

  • The structure of titanate nanobelts used as seeds for the nucleation of hydroxyapatite at the surface of titanium implants.

    abstract::The sequence of steps of a chemical treatment having as its goal the induce of nucleation and the growth of hydroxyl carbonated apatite (HCA) at the surface of titanium implants was studied by scanning and transmission electron microscopy in cross-section. In the first step, an acid etching forms a rough titanium hydr...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2008.05.001

    authors: Conforto E,Caillard D,Müller L,Müller FA

    更新日期:2008-11-01 00:00:00

  • A density gradient of VAPG peptides on a cell-resisting surface achieves selective adhesion and directional migration of smooth muscle cells over fibroblasts.

    abstract::Selective adhesion and migration of smooth muscle cells (SMCs) over fibroblasts (FIBs) is required to prevent adventitia fibrosis in vascular regeneration. In this study, a uniform cell-resisting layer of poly(ethylene glycol) (PEG) with a density gradient of azide groups was generated on a substrate by immobilizing t...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2018.04.005

    authors: Yu S,Zuo X,Shen T,Duan Y,Mao Z,Gao C

    更新日期:2018-05-01 00:00:00

  • Staphylococcus epidermidis originating from titanium implants infects surrounding tissue and immune cells.

    abstract::Infection is a major cause of failure of inserted or implanted biomedical devices (biomaterials). During surgery, bacteria may adhere to the implant, initiating biofilm formation. Bacteria are also observed in and recultured from the tissue surrounding implants, and may even reside inside host cells. Whether these bac...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2014.08.012

    authors: Riool M,de Boer L,Jaspers V,van der Loos CM,van Wamel WJB,Wu G,Kwakman PHS,Zaat SAJ

    更新日期:2014-12-01 00:00:00

  • Human-derived extracellular matrix from Wharton's jelly: An untapped substrate to build up a standardized and homogeneous coating for vascular engineering.

    abstract::One of the outstanding goals in tissue engineering is to develop a natural coating surface which is easy to manipulate, effective for cell adhesion and fully biocompatible. The ideal surface would be derived from human tissue, perfectly controllable, and pathogen-free, thereby satisfying all of the standards of the he...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2016.10.018

    authors: Dan P,Velot É,Francius G,Menu P,Decot V

    更新日期:2017-01-15 00:00:00

  • Functionalized ceramics for biomedical, biotechnological and environmental applications.

    abstract::Surface functionalization has become of paramount importance and is considered a fundamental tool for the development and design of countless devices and engineered systems for key technological areas in biomedical, biotechnological and environmental applications. In this review, surface functionalization strategies f...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章,评审

    doi:10.1016/j.actbio.2013.03.036

    authors: Treccani L,Yvonne Klein T,Meder F,Pardun K,Rezwan K

    更新日期:2013-07-01 00:00:00

  • Design and development of pH-responsive polyurethane membranes for intravaginal release of nanomedicines.

    abstract::The objective of this study was to develop and characterize a novel intravaginal membrane platform for pH-triggered release of nanoparticles (NPs), which is essential for efficient intravaginal delivery of certain effective but acid-labile therapeutic agents for sexually transmitted infections, such as small interferi...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2018.10.003

    authors: Kim S,Traore YL,Ho EA,Shafiq M,Kim SH,Liu S

    更新日期:2018-12-01 00:00:00

  • Novel β-Ti35Zr28Nb alloy scaffolds manufactured using selective laser melting for bone implant applications.

    abstract::Titanium (Ti) based tissue engineering scaffolds can be used to repair damaged bone. However, successful orthopedic applications of these scaffolds rely on their ability to mimic the mechanical properties of trabecular bone. Selective laser melting (SLM) was used to manufacture scaffolds of a new β-Ti35Zr28Nb alloy fo...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2019.01.051

    authors: Li Y,Ding Y,Munir K,Lin J,Brandt M,Atrens A,Xiao Y,Kanwar JR,Wen C

    更新日期:2019-03-15 00:00:00

  • Crystallographic relationships in the crossed lamellar microstructure of the shell of the gastropod Conus marmoreus.

    abstract::The crossed lamellar microstructure of mollusk shells shows a very complex hierarchical architecture constituted of long rod-shaped aragonite crystals stacked parallel to each other inside each first order lamella, which are almost perpendicular to the ones contained in parallel neighboring lamellae. To better underst...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2011.11.001

    authors: Rodriguez-Navarro AB,Checa A,Willinger MG,Bolmaro R,Bonarski J

    更新日期:2012-02-01 00:00:00

  • Rapid and area-specific coating of fluoride-incorporated apatite layers by a laser-assisted biomimetic process for tooth surface functionalization.

    abstract::Surface functionalization of teeth with fluoride-incorporated apatite layers displays great potential in treatments and prevention of dental disorders. In this study, we used a sintered hydroxyapatite (sHA) substrate as a model material of teeth, and established a rapid and area-specific coating technique of fluoride-...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2018.08.025

    authors: Joseph Nathanael A,Oyane A,Nakamura M,Mahanti M,Koga K,Shitomi K,Miyaji H

    更新日期:2018-10-01 00:00:00

  • A strain-mediated corrosion model for bioabsorbable metallic stents.

    abstract::This paper presents a strain-mediated phenomenological corrosion model, based on the discrete finite element modelling method which was developed for use with the ANSYS Implicit finite element code. The corrosion model was calibrated from experimental data and used to simulate the corrosion performance of a WE43 magne...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2017.04.020

    authors: Galvin E,O'Brien D,Cummins C,Mac Donald BJ,Lally C

    更新日期:2017-06-01 00:00:00

  • The effect of albumin and cholesterol on the biotribological behavior of hydrogels for contact lenses.

    abstract:UNLABELLED:The irritation/discomfort associated with the use of contact lenses (CLs) is often related to the eyelid-lens friction. Although the use of such devices is widespread, the information about the influence of the lacrimal fluid biomolecules on the tribological behavior of the CLs hydrogels is scarce. In this w...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2015.08.011

    authors: Silva D,Fernandes AC,Nunes TG,Colaço R,Serro AP

    更新日期:2015-10-01 00:00:00

  • Hydrogels in calcium phosphate moldable and injectable bone substitutes: Sticky excipients or advanced 3-D carriers?

    abstract::The combination of hydrogels and calcium phosphate particles is emerging as a well-established trend for bone substitutes. Besides acting as binders for the inorganic phase, hydrogels within these hybrid materials can modulate cell colonization physically and biologically. The influence of hydrogels on the healing pro...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章,评审

    doi:10.1016/j.actbio.2012.11.022

    authors: D'Este M,Eglin D

    更新日期:2013-03-01 00:00:00

  • Intervertebral disc swelling maintains strain homeostasis throughout the annulus fibrosus: A finite element analysis of healthy and degenerated discs.

    abstract::Tissues in the intervertebral disc have a large capacity to absorb water, partially due to the high glycosaminoglycan (GAG) content, which decreases linearly from the nucleus pulposus (NP) in the center to the outer annulus. Our recent work showed that fiber network and GAG distribution contributes to development of r...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2019.09.035

    authors: Yang B,O'Connell GD

    更新日期:2019-12-01 00:00:00

  • Backside wear, particle migration and effectiveness of screw hole plugs in acetabular hip joint replacement with cross-linked polyethylene.

    abstract::In total hip arthroplasty, osteolysis of the acetabulum often occurs at the backside of cups in the area of screw holes, indicating a clinically relevant amount of polyethylene (PE) wear particles in this area. In order to avoid a possible migration of wear particles to the acetabulum-bone, screw hole plugs are provid...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2019.07.050

    authors: Braun S,Vardag S,Mueller U,Schroeder S,Sonntag R,Bormann T,Gotterbarm T,Kretzer JP

    更新日期:2019-10-01 00:00:00

  • Improved bone-forming functionality on diameter-controlled TiO(2) nanotube surface.

    abstract::The titanium dioxide (TiO(2)) nanotube surface enables significantly accelerated osteoblast adhesion and exhibits strong bonding with bone. We prepared various sizes (30-100 nm diameter) of titanium dioxide (TiO(2)) nanotubes on titanium substrates by anodization and investigated the osteoblast cellular behavior in re...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2009.05.008

    authors: Brammer KS,Oh S,Cobb CJ,Bjursten LM,van der Heyde H,Jin S

    更新日期:2009-10-01 00:00:00

  • A versatile strategy to create an active tumor-targeted chemo-photothermal therapy nanoplatform: A case of an IR-780 derivative co-assembled with camptothecin prodrug.

    abstract::Self-assembled nanovehicles of chemotherapy drug with photothermal agent are regarded as intriguing chemo-photothermal therapy nanoplatform. However, most of the drugs and photothermal agents have poor water solubility and poor interactions to drive the formation of self-assembled nanovehicles, which is a bottleneck o...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2018.11.049

    authors: He W,Jiang Y,Li Q,Zhang D,Li Z,Luan Y

    更新日期:2019-01-15 00:00:00

  • Screening of peptides with a high affinity for ZnO using spot-synthesized peptide arrays and computational analysis.

    abstract::Metal-binding peptides have attracted attention for their usefulness in biomineralization processes. In this work screening of high affinity peptides against ZnO was performed using a combinatorial library approach with a peptide array and computational analysis. The computationally assisted peptide screening and desi...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2009.12.025

    authors: Okochi M,Ogawa M,Kaga C,Sugita T,Tomita Y,Kato R,Honda H

    更新日期:2010-06-01 00:00:00

  • Cryogel scaffolds for regionally constrained delivery of lysophosphatidylcholine to central nervous system slice cultures: A model of focal demyelination for multiple sclerosis research.

    abstract::The pathology of multiple sclerosis (MS) is typified by focal demyelinated areas of the brain and spinal cord, which results in axonal degeneration and atrophy. Although the field has made much progress in developing immunomodulatory therapies to reduce the occurrence of these focal lesions, there is a conspicuous lac...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2019.08.030

    authors: Eigel D,Zoupi L,Sekizar S,Welzel PB,Werner C,Williams A,Newland B

    更新日期:2019-10-01 00:00:00

  • A modular design strategy to integrate mechanotransduction concepts in scaffold-based bone tissue engineering.

    abstract::Repair or regeneration of load-bearing bones has long been an incentive for the tissue engineering community to develop a plethora of synthetic bone scaffolds. Despite the key role of physical forces and the mechanical environment in bone regeneration, the mechanotransduction concept has rarely been incorporated in st...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2020.10.012

    authors: Entezari A,Swain MV,Gooding JJ,Roohani I,Li Q

    更新日期:2020-12-01 00:00:00

  • Microstructure and deformation behavior of biocompatible TiO2 nanotubes on titanium substrate.

    abstract::Titanium oxide coatings have been shown to exhibit desirable properties as biocompatible coatings. We report on the quantitative microstructure characterization and deformation behavior of TiO(2) nanotubes on Ti substrate. Nanotubes were processed using anodic oxidation of Ti in a NaF electrolyte solution. Characteriz...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2006.08.004

    authors: Crawford GA,Chawla N,Das K,Bose S,Bandyopadhyay A

    更新日期:2007-05-01 00:00:00

  • Interaction force measurements for the design of tissue adhesives.

    abstract::Synthesis of tissue adhesives had been carried out in various laboratories in the past decades but the development is currently stalled. One of the key reasons, it is believed, is that researchers have not fully understood and resolved the role of the functional groups that are responsible for good adhesion to biologi...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2008.08.001

    authors: Lim KP,Tan LP

    更新日期:2009-01-01 00:00:00

  • Impact of the composition of alginate and gelatin derivatives in bioconjugated hydrogels on the fabrication of cell sheets and spherical tissues with living cell sheaths.

    abstract::Gelatin and alginate derivatives possessing phenolic hydroxyl moieties (gelatin-Ph and Alg-Ph) were dissolved in aqueous solution and conjugated via horseradish peroxidase-catalyzed crosslinking, resulting in hydrogelation. The objective of creating the hydrogels was to prepare cell sheets and spherical tissues wrappe...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2013.01.037

    authors: Liu Y,Sakai S,Taya M

    更新日期:2013-05-01 00:00:00