Abstract：
:A decrease in bone density at the hip or spine has been shown to increase the risk of fracture. A limitation of the bone mineral density (BMD) measurement is that it provides only a measure of a bone sample's average density when projected onto a 2D surface. Effectively, what determines bone fracture is whether an applied load exceeds ultimate strength, with both bone tissue material properties (can be approximated through bone density), and geometry playing a role. The goal of this project was to use bone geometry and BMD obtained from radiographs and DXA measurements respectively to estimate fracture risk, using a two-dimensional finite element model (FEM) of the sagittal plane of lumbar vertebrae. The Canadian Multicentre Osteoporosis Study (CaMos) data was used for this study. There were 4194 men and women over the age of 50 years, with 786 having fractures. Each subject had BMD testing and radiographs of their lumbar vertebrae. A single two dimensional FEM of the first to fourth lumbar vertebra was automatically generated for each subject. Bone tissue stiffness was assigned based on the BMD of the individual vertebrae, and adjusted for patient age. Axial compression boundary conditions were applied with a force proportional to body mass. The resulting overall strain from the applied force was found. Men and women were analyzed separately. At baseline, the sensitivity of BMD to predict fragility fractures in women and men was 3.77% and 0.86%, while the sensitivity of FEM to predict fragility fractures for women and men was 10.8% and 11.3%. The FEM ROC curve demonstrated better performance compared to BMD. The relative risk of being considered at high fracture risk using FEM at baseline, was a better predictor of 5 year incident fragility fracture risk compared to BMD.
journal_name
Med Eng Physjournal_title
Medical engineering & physicsauthors
MacNeil JA,Adachi JD,Goltzman D,Josse RG,Kovacs CS,Prior JC,Olszynski W,Davison KS,Kaiser SM,CaMos Research Group.doi
10.1016/j.medengphy.2011.08.008subject
Has Abstractpub_date
2012-05-01 00:00:00pages
478-84issue
4eissn
1350-4533issn
1873-4030pii
S1350-4533(11)00218-9journal_volume
34pub_type
杂志文章abstract：:Understanding the load mechanics of orthopaedic implants is important to be able to predict their behaviour in-vivo. Much research, both mechanical and clinical, has been carried out on hip and knee implants, but less has been written about the mechanics of wrist implants. In this paper, the load mechanics of the Univ...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2016.02.008
更新日期：2016-06-01 00:00:00
abstract：:Aseptic loosening is the major failure mode for hip prostheses. Currently, loosened prostheses are revised during open surgery. Because of a high complication rate, this demanding procedure cannot be performed in patients with a poor general health. We are developing an alternative minimally invasive refixation proced...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2011.07.029
更新日期：2012-04-01 00:00:00
abstract：:Hermetic electrical feedthroughs are essential for safe and functional active implantable biomedical devices and for a wide range of other applications such as batteries, supercapacitors, OLEDs and solar cells. Ceramics and metals have previously been the materials of choice for encapsulations, while polymers have adv...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2017.01.010
更新日期：2017-04-01 00:00:00
abstract：:The present study demonstrates the design, simulation, fabrication and testing of a label-free continuous manipulation and separation micro-device of particles/biological cells suspended on medium based on conventional dielectrophoresis. The current dielectrophoretic device uses three planner electrodes to generate no...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2013.12.010
更新日期：2014-06-01 00:00:00
abstract：:There is an increasing awareness among the populace of the need for regular health check-up to detect diseases in their early stages and thereby administer treatments in a timely fashion. However, commercially available physiological signal monitoring devices, which may offer clues on the onset of diseases, are time-c...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2011.04.011
更新日期：2013-02-01 00:00:00
abstract：:The loads between adjacent vertebrae can be generalised as a single spatial force acting at the intervertebral centre of reaction. The exact position in vivo is unknown. However, in rigid body musculoskeletal models that simulate upright standing, the position is generally assumed to be located at the discs' centres o...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2015.12.003
更新日期：2016-03-01 00:00:00
abstract：:Aims of the present study were to test the hypotheses that (1) the compressive properties of articular cartilage are affected more by changes in the medium ionic concentration than the tensile properties, (2) collagen network controls the compression-tension nonlinearity of articular cartilage, and (3) proteoglycan (P...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2009.11.004
更新日期：2010-03-01 00:00:00
abstract：:A kinematical model of the lower spine was designed and used to obtain a robust estimation of the vertebral rotations during torso movements from skin-surface markers recorded by video-cameras. Markers were placed in correspondence of the anatomical landmarks of the pelvic bone and vertebral spinous and transverse pro...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2004.08.005
更新日期：2004-12-01 00:00:00
abstract：:A few finite element models have addressed the dynamic juxtaarticular stress transmission but none focused the investigation on the combined influence of the individual moduli of the underlying bones, including the subchondral plate, the femoral head and the femoral neck of the proximal femur. A finite element model i...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2004.12.008
更新日期：2005-05-01 00:00:00
abstract：:The acoustic power of high-intensity focused ultrasound (HIFU) is an important parameter that should be measured prior to each treatment to guarantee effective and safe outcomes. A new calibration technique was developed that involves estimating the pressure distribution, calculating the acoustic power using an underw...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2015.01.014
更新日期：2015-03-01 00:00:00
abstract：:This study employed a noncontact resonance frequency (RF) detection technique that was developed by our group to evaluate the interfacial bone in in vitro implant-bone models. Based on our method, the implant-bone structure was excited by the acoustic energy of a loudspeaker, and its vibration response was acquired wi...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2013.05.006
更新日期：2013-12-01 00:00:00
abstract：:The diagnosis of aseptic loosening of hip implants is often challenging. A vibrational analysis of the bone-implant interface could be an alternative method to analyze the fixation of endoprostheses. We assessed an innovative and new approach for excitation by using extracorporeal shockwaves in this study. In three ca...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2014.11.011
更新日期：2015-02-01 00:00:00
abstract：:We present a finite element based simulation and analysis method to describe the spatial extent of stimulation and the effects of electrode-tissue interactions in subretinal prostheses. In particular, we estimate the threshold stimulation current needed to depolarise and evoke action potentials in the ganglion cells t...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2011.01.015
更新日期：2011-07-01 00:00:00
abstract：:A novel method to evaluate postural sway is presented: balance strategies are identified by applying a markerless image processing algorithm to video sequences obtained from commercially available systems. The motion estimation technique for the analysis of video sequences is a coarse to fine procedure based on the bl...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2005.10.007
更新日期：2006-09-01 00:00:00
abstract：:Easy insertion of the implant and stable bone purchase is essential for an ideal dental implantation. At the implant tip, the cutting flutes and conical profile are respectively designed to reduce insertion resistance and facilitate the initial insertion. However, the tapered tip might reduce the self-tapping and bone...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2011.09.021
更新日期：2012-09-01 00:00:00
abstract：:During reconstructive surgery of the face, one side may be used as a template for the other, exploiting assumed bilateral facial symmetry. The best method to calculate this plane, however, is debated. A new semi-automatic technique for calculating the symmetry plane of the facial skeleton is presented here that uses s...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2013.06.006
更新日期：2013-12-01 00:00:00
abstract：:The construction and performance of a 5.4 m3 combined direct and indirect calorimeter for human subjects is described. The calorimeter was constructed for studies on human subjects primarily undergoing fast alterations in heat production and heat losses, e.g. after a meal or during physical exercise. A heat sink and a...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/s1350-4533(98)00037-x
更新日期：1998-06-01 00:00:00
abstract：:Human-administered clinical scales are commonly used for quantifying motor performance and determining the course of therapy in post-stroke individuals. Computerized methods aim to improve consistency, resolution and duration of patients' evaluation. The objective of this study was to test the validity of computerized...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2019.06.001
更新日期：2019-09-01 00:00:00
abstract：:A small and wireless device that can capture the temporal pattern of perspiration by a novel structure of water vapor collection combined with reusable desiccant has been developed. The novel device consists of a small cylindrical case with a temperature/relative humidity sensor, battery-driven data logger, and silica...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2015.12.009
更新日期：2016-04-01 00:00:00
abstract：:In this paper we investigate the extent to which variable porosity drug-eluting coatings can provide better control over drug release than coatings where the porosity is constant throughout. In particular, we aim to establish the potential benefits of replacing a single-layer with a two-layer coating of identical tota...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2017.04.006
更新日期：2017-07-01 00:00:00
abstract：:Tripolar nerve cuff electrodes have been widely used for measuring peripheral nerve activity. However, despite the high signal-to-noise ratio levels that can be achieved with this recording configuration, the clinical use of cuff electrodes in closed-loop controlled neuroprostheses remains limited. This is largely att...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2016.11.010
更新日期：2017-02-01 00:00:00
abstract：:Artificial blood pumps play an increasingly important role in the treatment of end-stage cardiac failure. The fluid dynamics of blood flow through such devices crucially affects their clinical effectiveness. Specifically, if the flow of blood stagnates or slowly re-circulates thrombus formation can occur and the avoid...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/s1350-4533(00)00023-0
更新日期：2000-04-01 00:00:00
abstract：:We adopt the Ensemble Empirical Mode Decomposition (EEMD) method, with an appropriate thresholding on the Intrinsic Mode Functions (IMFs), to denoise the magnetocardiography (MCG) signal. To this end, we discuss the two associated problems that relate to: (i) the amplitude of noise added to the observed signal in the ...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2014.06.023
更新日期：2014-10-01 00:00:00
abstract：:Kinematic parameters for 10 normal subjects and 10 patients with ankle arthrodesis are grouped using the fuzzy cluster paradigm. The features chosen for clustering are Euler angles of the sagittal plane in the hindfoot, the forefoot and combined hindfoot and forefoot joints. Gait patterns are identified using informat...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/s1350-4533(01)00020-0
更新日期：2001-03-01 00:00:00
abstract：:In this study, we propose a new classification method for early differentiation of paroxysmal and persistent atrial fibrillation episodes, i.e. those which spontaneously or with external intervention will return to sinus rhythm within 7 days of onset from the ones where the arrhythmia is sustained for more than 7 days...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2016.10.013
更新日期：2017-01-01 00:00:00
abstract：:Snoezelen(®) multi-sensory (SMS) environment has been commonly applied as a therapeutic strategy to alleviate the symptoms associated to a wide variety of pathologies. Despite most studies have reported a wide range of positive revealed short-term changes associated to SMS intervention, little has been done to systema...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2012.06.001
更新日期：2013-03-01 00:00:00
abstract：:Currently, the study of ion composition and performance in human biofluids plays an important role in biomedical engineering research and technology. This field may become universal for human diagnostics; it allows early detection of different diseases in humans by measuring changes in ion behaviour in human biofluids...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2011.04.007
更新日期：2011-11-01 00:00:00
abstract：:The presented research positively evaluates the vocality of the cough sound by estimating the global cough fundamental frequency or pitch. The fundamental frequency was determined by autocorrelation analysis on both the original time-signal and the linear predicted time-signal. The experimental cough database was regi...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/s1350-4533(02)00055-3
更新日期：2002-09-01 00:00:00
abstract：:The interaction of electromagnetic fields with the human body is quantified by the dielectric properties of biological tissues. These properties are incorporated into complex numerical simulations using parametric models such as Debye and Cole-Cole, for the computational investigation of electromagnetic wave propagati...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2017.01.017
更新日期：2017-05-01 00:00:00
abstract：:Pressure ulcers are a major problem worldwide believed to affect over 5% of all hospital in-patients, and countless others in the community at large. Many types of Patient Support Systems (PSS) are sold as pressure ulcer prevention equipment, but no consensus exists as to their mechanical efficacy. The use of human vo...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/s1350-4533(99)00053-3
更新日期：1999-06-01 00:00:00
