Abstract:
:The relation between the bonding efficacy of the dentin adhesive and the physical change of the dentin after treatment with various dentin cleansers was investigated. The dentin surface was cleaned with one of the seven experimental dentin cleansers, 5, 10, 20, 30 and 40% of the phosphoric acid, neutralized 0.5 M EDTA solution (pH 7.4) and 9.1% pyruvic acid containing 9.1% glycine, prior to the combining application of 35% hydroxyethylmethacrylate solution (HEMA) and a marketed dentin bonding agent. It was found that the bonding efficacy of the dentin bonding system employed in this study deteriorated with the degree of reduction of Vickers hardness on the dentin surface after the dentin cleaning.
journal_name
Dent Mater Jjournal_title
Dental materials journalauthors
Chiba M,Itoh K,Wakumoto Sdoi
10.4012/dmj.8.76subject
Has Abstractpub_date
1989-06-01 00:00:00pages
76-85issue
1eissn
0287-4547issn
1881-1361journal_volume
8pub_type
杂志文章abstract::The aim of this study was to investigate in how far the way the specimen is fixed to the testing device influences the micro-tensile bond strength of adhesives to dentin. Compared to a flat jig, a notched jig enables the specimen to be aligned easier and more accurately perpendicular to the interface, thereby concentr...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.26.694
更新日期:2007-09-01 00:00:00
abstract::The influence of a thin carbonate-containing hydroxyapatite (CA) coating to tetragonal zirconia polycrystal (TZP) on osteoblastlike cell response was investigated. TZP disks were subjected to blasting and acid etching. Thin CA coatings were deposited by the molecular precursor method (TZP-CA). Initial cell adhesion of...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2013-122
更新日期:2014-01-01 00:00:00
abstract::The purpose of this study was to evaluate the effects of acid-etched titanium on the biological responses of osteoblast-like MC3T3-E1 cells. Four types of treatments (polishing, sandblasting, concentrated H2SO4 etching, and concentrated H2SO4 etching with vacuum firing) were carried out on the surfaces of commercially...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.27.415
更新日期:2008-05-01 00:00:00
abstract::The aim of this study was to examine the lifespan or number of cycles to failure of tapered rotary nickel-titanium (Ni-Ti) endodontic instruments. Simulated root canals with different curvatures were used to determine a relation between canal curvature and instrument lifespan. Using a novel mathematical model for the ...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2011-254
更新日期:2012-01-01 00:00:00
abstract::The aim of this in vitro study was to evaluate the effects of desensitizer pre-treatment on in-office bleaching using an artificial discoloration tooth model. The stained specimens were divided into four groups (n=10); without application (Control group), Shield Force plus (SF group), UltraEz (UE group) and Teeth Mate...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2018-129
更新日期:2019-10-02 00:00:00
abstract::This study investigated hydrogen peroxide (H2O2) concentration of two home bleaching gels, in their dispensing syringes and their degradation in vivo in intraoral bleaching trays. Two bleaching gels were studied, 7.5% hydrogen peroxide (HP) and 20% carbamide peroxide (CP). The concentration of H2O2 was determined in d...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2012-317
更新日期:2013-01-01 00:00:00
abstract::The torsional fracture strength at the interface between a base plate and veneering material was evaluated for three kinds of veneered restoration: porcelain fused to zirconia (PFZ), porcelain fused to metal (PFM), and composite resin veneered metal (CRVM). The metal and zirconia base plate (30×4×0.4 mm) were prepared...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2016-432
更新日期:2018-07-29 00:00:00
abstract::This study investigated the effect of a coating material containing S-PRG fillers on the demineralization of bovine enamel and dentin, by measuring changes in the transmitted ultrasonic velocity. Bovine enamel and dentin specimens with and without coating (n=6 for each condition) were cut into blocks, immersed in 0.1 ...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2012-153
更新日期:2012-01-01 00:00:00
abstract::Quaternary ammonium compounds (QACs) have been used widely in medicine, owing to their antimicrobial properties. They also have strong permeability, stable performance, low skin irritation, low toxicity, low corrosion, lasting biological effects and so on, comparing with other antimicrobial agents. At the end of last ...
journal_title:Dental materials journal
pub_type: 杂志文章,评审
doi:10.4012/dmj.2017-096
更新日期:2018-03-30 00:00:00
abstract::The objective of this study was to test the hypothesis that thermal cycling weakens the flexural strength of porcelain. Specimens of Deguceram Gold and Vita Omega 900 were tested in four groups of 30 specimens each: in the original glazed condition versus being ground with 1000-grit, 600-grit, and 100-grit silicon car...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.28.433
更新日期:2009-07-01 00:00:00
abstract::The bonding efficacy of sclerotic dentin was determined by measuring the polymerization contraction gap width of a commercial light-activated resin composite in a cervical defect and by measuring the micro-Vicker's hardness at the dentin adhesive surface; morphological characteristics were observed using a scanning el...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.20.359
更新日期:2001-12-01 00:00:00
abstract::The objective of this study was to evaluate, using methylene blue (MB), the effects of various light sources on the bleaching action of hydrogen peroxide (H(2)O(2)) with two titanium dioxide (TiO(2)) photocatalysts - an ultraviolet light-activated TiO(2) photocatalyst (UVTiO(2)) versus a visible light-activated TiO(2)...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.28.693
更新日期:2009-11-01 00:00:00
abstract::The aim was to characterize by atomic force microscopy (AFM) the nanostructure of human dentin surfaces affected by dental fluorosis (DF) before and after phosphoric acid etching. This study included 240 human dentin samples classified according to the severity of DF, which were divided into four groups using the Thyl...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2011-023
更新日期:2011-01-01 00:00:00
abstract::The influence of the number of cycles on shear fatigue strength to enamel and dentin using dental adhesives in self-etch mode was investigated. A two-step self-etch adhesive and two universal adhesives were used to bond to enamel and dentin in self-etch mode. Initial shear bond strength and shear fatigue strength to e...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2017-012
更新日期:2018-01-30 00:00:00
abstract::This paper reviews the development of dental adhesives by collating information of related studies from original scientific papers, reviews, and patent literatures. Through our development, novel radical polymerization initiators, adhesive monomers, and microcapsules were synthesized, and their effects on adhesion wer...
journal_title:Dental materials journal
pub_type: 杂志文章,评审
doi:10.4012/dmj.2009-057
更新日期:2010-03-01 00:00:00
abstract::Ag-Pd-Cu-Au alloy was subjected to a Thermo-Mechanical Analyzer to investigate high temperature properties up to its liquidus temperature. Microstructural examination and elemental analysis with EPMA were also conducted in the solid/liquid mixture region. The following conclusions were obtained. (1) The solidus temper...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.22.227
更新日期:2003-09-01 00:00:00
abstract::This study evaluated the effect of adding silane coupling agent on initial and long-term bond strengths of one-step self-etch adhesives to enamel-dentin-composite in combined situation. Cervical cavities were prepared on extracted molars and filled with Clearfil AP-X. After water-storage for one-week, the filled teeth...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2015-050
更新日期:2015-01-01 00:00:00
abstract::A zirconia-binding peptide motif was identified using a peptide phage display system. Yttria stabilized zirconia beads and discs were used as the target. Quartz crystal microbalance was used to monitor the binding of phages to zirconia. Starting from a library of phages displaying random sequences of 12-mer peptides, ...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2011-161
更新日期:2011-01-01 00:00:00
abstract::The aim of this in vitro study was to evaluate the effects of different preparation angles on the precision of fit of zirconia crown frameworks. Dies were fabricated with three different preparation angles: 4, 8, and 12 degrees total taper. Ten copings were fabricated for each angle by a laboratory and a milling-cente...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.27.814
更新日期:2008-11-01 00:00:00
abstract::The aim of this study was to develop and evaluate an automatic pH-cycling system, which was intended for performing time-lapse analyses of dental caries. Two single-section specimens prepared from each of the five extracted human incisors were studied under a condition of 3- or 9-cycles/day for seven weeks. Increase o...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.25.280
更新日期:2006-06-01 00:00:00
abstract::The purpose of this study was to clarify the effect of silver nanoparticles on the behavior of subcritical crack growth (SCG) in dental porcelains. Prior to occurrence of fast fracture in dental porcelains, SCG occurs and leads to strength degradation over time. SCG in dental porcelains can be characterized by the str...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2012-266
更新日期:2013-01-01 00:00:00
abstract::To clarify the mechanical properties of fiber-reinforced hybrid resin bridges, this study evaluated the influence of various bonding agents ((Modeling Liquid (ML), DE Resin (DE), Bell Bond (BE), Mega Bond (MG), Durafil Bond (DU), Fluoro Bond (FB), Mac-Bond (MC), EG Bond (EG), Unifill Bond (UN), Single Bond (SN)) impre...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.27.723
更新日期:2008-09-01 00:00:00
abstract::The purpose of this study was to evaluate the influence of heating, cast bonding, and subsequent polishing procedures on attractive force of magnetic attachments. Two magnetic attachment systems with keepers of different chemical compositions (Hicorexslim 3013, 447J1; Magfit EX400, AUM20) were employed. Keepers examin...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.26.393
更新日期:2007-05-01 00:00:00
abstract::The purpose of this study was to investigate the effect of remaining dentin thickness (RDT) and long term water storage on dentin bond strength in-vitro. Twenty-seven third molars were randomly divided into 3 groups: Clearfil Bond SE ONE (SE1, Kuraray Noritake Dental, Okayama, Japan), G-Bond plus (GB, GC, Tokyo, Japan...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2017-140
更新日期:2018-07-29 00:00:00
abstract::The purpose of this study was to evaluate the effect of different polymerization cycles on the flexural strengths and microhardness of two denture base materials (Meliodent and Paladent). Heat-polymerized acrylic resin specimens (65.0 mm long×10.0 mm wide×2.5 mm in height) were prepared using different short and long ...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2016-023
更新日期:2017-03-31 00:00:00
abstract::An experimental primer was developed as a single-step bonding system for resin-modified glass ionomer cements (GIC). Efficacy of this primer on adhesion of resin-modified GICs and resin composite to enamel and dentin was evaluated by shear bond test and SEM observation. Good bond strengths to enamel were obtained (> 1...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.16.40
更新日期:1997-06-01 00:00:00
abstract::This study investigated the changes in hardness and Young's modulus of the transparent layer of dentin associated with aging and the carious process. Eighteen extracted human molars with or without coronal caries were used in this study. The normal teeth were divided into two groups by age, and the carious teeth were ...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.24.648
更新日期:2005-12-01 00:00:00
abstract::This study investigated the contrast ratio and grain size depending on sintering parameters of twelve different zirconia materials and compared with glass-ceramic (N=156, n=12 per group). Contrast ratio of all ceramics was measured using a spectrophotometer according to ISO 2471: 2008. Grain sizes of zirconia were det...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2014-056
更新日期:2014-01-01 00:00:00
abstract::Atmospheric-pressure cold plasma was applied to process the surface of heat-polymerized acrylic resin. Changes to the physical properties and early adherence of Candida albicans were investigated. Alternating current cold plasma with Ar/O2 as working gas was used. Scanning electron microscopy (SEM) and X-ray photoelec...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2015-035
更新日期:2015-01-01 00:00:00
abstract::We investigated the effects of CO2 laser irradiation combined with acidulated phosphate fluoride (APF) application on the demineralization of enamel. APF gel was applied to the buccal enamel of human premolars and CO2 laser was applied. After the specimens were immersed in demineralization solution for 72 h, they were...
journal_title:Dental materials journal
pub_type: 杂志文章
doi:10.4012/dmj.2014-225
更新日期:2015-01-01 00:00:00